1996 Pontiac Trans Sport Fuel and Emissions Systems

Essential 1996 Pontiac Trans Sport Fuel and Emissions Systems

ACDelco – GM Original Equipment Fuel Tank Sending Unit (Part No.E2030351226ACD)

GM Original Equipment Fuel Tank Sending Unit

from

$220.67
The ACDelco GM Original Equipment Fuel Tank Sending Unit is a GM-recommended replacement for your vehicle’s original component. The Fuel Tank Sending Unit consists of a float connected to a thin, metal rod that is mounted to a resistor. Together, these components sense fluid level changes, which are reflected on the vehicle’s fuel gauge. This original equipment sending unit has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Designed with thick wiper contacts and wear pads that provide durability, especially with today’s ethanol fuels
  • Design helps eliminate complications due to worn fingers on the sensor wiper arm, sulfur contamination, and failures of wire wound sensors and/or lead sensor kits
  • GM-recommended replacement part for your GM vehicle’s original factory fuel tank sending unit
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Vapor Canister (Part No.CPG1187)

Vapor Canister

from

$149.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – Exhaust Gas Recirculation (EGR) Valve Motor Connector (Part No.PT5511)

Exhaust Gas Recirculation (EGR) Valve Motor Connector

from

$38.99
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Our distributor caps are made of high dielectric strength, glass/mineral reinforced polyester resin for less carbon tracking, greater resistance to electrical breakdown, and superior performance
  • Solid brass terminals (where available) make better connections and greater resistance to electrical pitting and corrosion
  • RFI resistors where specified to eliminate radio static and potential ECU-damaging spikes
  • With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Carquest Premium – Fuel Pump Hanger Assembly: Fuel Pump and Strainer (Part No.HS2496189)

Fuel Pump Hanger Assembly: Fuel Pump and Strainer

from

$181.99
Carquest Premium fuel tank sending units are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Carquest Premium fuel tank sending units are supplied with the wiring harness and gaskets or seals when required for the application. All sending units are precision-tested ensuring accurate readings at any fuel level. Carquest Premium fuel tank sending units are engineered with superior quality components to provide the longest life and are backed up by an industry-leading warranty.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
  • Includes installation gaskets or seals where applicable
See More

Felpro – EGR/EXHAUST AIR SUPPLY GASKET (Part No.70790)

EGR/EXHAUST AIR SUPPLY GASKET

from

$3.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Carquest Premium – Fuel Pump Pulsator A3541776 (Part No.A3541776)

Fuel Pump Pulsator A3541776

from

$47.99
Carquest Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
See More

Carquest – Idle Air Control Valve (Part No.76A1001)

Idle Air Control Valve

from

$49.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – Fuel Injector Seal Kit (Part No.274838)

Fuel Injector Seal Kit

from

$8.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • High-quality materials withstand extreme conditions
  • Undergoes extensive testing to ensure reliability
  • As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process
See More

Dorman – 7-Wire Pigtail Connector (Part No.84645)

7-Wire Pigtail Connector

from

$29.49
Make better electrical repairs and accessory installations with this pigtail connector. Designed for a clean appearance when installed, it features weatherproof terminals and a locking tab for a reliable quick disconnect electrical connection.

Product Features:
  • Professional appearance – this electrical pigtail is designed for a clean, professional look when installed
  • Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
  • Durable construction – this pigtail connector features weatherproof seals and a locking tab for a reliable connection
  • Versatile component – this connector can be used in a variety of repairs and custom installations
See More

Delphi – Delphi Idle Control Valve (Part No.C4030210530DEL)

Delphi Idle Control Valve

from

$102.13
For more than a century, Delphi has been making the parts cars are born with. Delphi is proud of its OE heritage, and over the years they have used that experience to expand into a global aftermarket supplier.

Product Features:
  • Corrosion resistant housing material
  • Premium materials for longer service life
  • Meets or exceeds OEM specifications
See More

Felpro – Fuel Injector O-Ring Kit (Part No.ES 70599)

Fuel Injector O-Ring Kit

from

$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

NTK – Air Charge Temperature Sensor (Part No.AJ0003)

Air Charge Temperature Sensor

from

$27.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • NTK’s Air Charge Temperature Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper monitoring of air temperature entering the engine.
  • The Air Charge Temperature Sensor is used by the Engine Control Unit (ECU) to measure air density for fuel mixture control, which allows it to make continuous adjustments to the engine’s air / fuel mixture for maximum fuel efficiency.
See More

NTK – Switching Oxygen Sensor: 4 Wire, 12.5" Long, Heated, Direct Fit (Part No.21528)

Switching Oxygen Sensor: 4 Wire, 12.5" Long, Heated, Direct Fit

from

$75.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
  • PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
  • OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
  • EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
  • EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
  • ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
  • NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
See More

Carquest Premium – ABS Wheel Speed Sensor Connector (Part No.PTA1749)

ABS Wheel Speed Sensor Connector

from

$25.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

NTK – Manifold Absolute Pressure Sensor (Part No.MA0089)

Manifold Absolute Pressure Sensor

from

$73.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.
  • The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.
See More

Carquest Premium – Engine Coolant Temperature Sending Unit Switch Connector (Part No.PTA1314)

Engine Coolant Temperature Sending Unit Switch Connector

from

$10.29
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Cardone – Mass Air Flow Sensor (Part No.74-8309)

Mass Air Flow Sensor

from

$93.99
CARDONE Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.

Product Features:
  • 100% re-solder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
  • On-car vehicle validation routines ensure that modules meet all form, fit, durability and performance requirements.
  • All modules are 100% tested with automated computer test equipment to ensure full functionality and reliability.
  • Our sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate feedback to the vehicle’s engine control management system.
  • Components are rated to handle demanding temperature variations for optimum reliability in every environment.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Felpro – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.70766)

Exhaust Gas Recirculation (EGR) Valve Gasket

from

$2.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Carquest Premium – Premium Vapor Canister Vent Solenoid CPA3002 (Part No.CPA3002)

Premium Vapor Canister Vent Solenoid CPA3002

from

$41.49
The Evaporative Emission System is designed to control fuel vapors in the vehicle fuel storage system to prevent any release of fuel vapors into the atmosphere. In a normally operating system, released vapors from the fuel storage tank will be directed into an on-board charcoal canister via a piping system and control valves. Under the most ideal engine operating condition, the vapors will be pulled into the engine to be burned during the normal combustion process.

Product Features:
  • Application matched components ensure the vehicle will be returned to like new condition.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Features application specific mounting bracket providing ease of installation.
See More

DENSO – First Time Fit Oxygen Sensor (Part No.C5010118198ND)

First Time Fit Oxygen Sensor

from

$59.26
Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.

Product Features:
  • SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
  • DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
  • ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
  • STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.
See More

Carquest – Fuel Injection Pressure Regulator (Part No.22849)

Fuel Injection Pressure Regulator

from

$70.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Application-specific to ensure the proper fit and form
  • Precision-engineered pressure regulators for proper fuel delivery and engine performance
  • As a global manufacturer, we have complete control of the manufacturing process, from components to finished product?
See More

Carquest Premium – Electric Fuel Pump Inertia Switch (Part No.SBA4426)

Electric Fuel Pump Inertia Switch

from

$84.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

ACDelco – Multi-Purpose Pigtail (Part No.PT2195)

Multi-Purpose Pigtail

from

$181.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Protective outer coverings help provide long-lasting durability
  • Color-coded wires allow for easy installation
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

ACDelco – GM Original Equipment Fuel Injection Pressure Regulator O-Ring (Part No.C3002374028ACD)

GM Original Equipment Fuel Injection Pressure Regulator O-Ring

from

$26.83
The ACDelco GM Original Equipment Fuel Injection Pressure Regulator O-Ring is a GM-recommended replacement that provides the same performance, durability, and service life as your factory original equipment.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest – Exhaust Gas Recirculation (EGR) Valve (Part No.41C1007)

Exhaust Gas Recirculation (EGR) Valve

from

$81.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17591)

Keyed Alike Locking Fuel Cap

from

$11.99
None

Product Features:
  • Protects your fuel from theft and vandalism
  • Manufactured from durable, long-life materials
  • Independently tested for emission control
  • Passes all state and federal emissions tests
  • Reduces air pollution with proper sealing and venting
See More

Carquest Premium – Fuel Pump Strainer (Part No.FS260335)

Fuel Pump Strainer

from

$9.99
CARQUEST Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our CARQUEST Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. CARQUEST Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.A211-1403)

Remanufactured Fuel Injector

from

$47.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes new O-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

1996 Pontiac Trans Sport Fuel and Emissions Systems

You count on your 1996 Pontiac Trans Sport to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 88 Fuel and Emissions Systems ranging in price from $2.49 to $244.99, you’re sure to find everything you need for your 1996 Pontiac Trans Sport.

Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 17 different brands like Carquest Premium, Felpro, and DENSO. 1996 Pontiac Trans Sport Fuel and Emissions Systems start as low as $2.49!

One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 743 extensive product reviews on 1996 Pontiac Trans Sport Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Oxygen Sensor: 4 Wire, 16.54" Long, Heated, Exact Fit with 4.8 stars and Oxygen Sensor: 4 Wire, 12.01" Long, Heated, Exact Fit with 4.6 stars.

Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1996 Pontiac Trans Sport below to get started!

Top-Rated Fuel and Emissions Systems Brands For Your 1996 Pontiac Trans Sport

Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1996 Pontiac Trans Sport running right for years to come. In our inventory you’ll find brands like Carquest Premium, Felpro, DENSO, and even more.

Popular Delphi Fuel and Emissions Systems

You’ll find popular Delphi brand products across Air Flow Sensors. All are waiting to get your 1996 Pontiac Trans Sport back on the road. Some of the top-rated Delphi products in these categories are:
Air Charge Temperature Sensor
from $20.49
(1)
Air Charge Temperature Sensor
Air Charge Temperature Sensors

Top-Rated Carquest Premium Fuel and Emissions Systems


If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Fuel and Emissions Systems for your 1996 Pontiac Trans Sport, and some of our most reviewed Carquest Premium parts include:

FAQs for 1996 Pontiac Trans Sport Fuel and Emissions Systems

What are the most purchased Fuel and Emissions Systems for the 1996 Pontiac Trans Sport?

Out of 88 Fuel and Emissions Systems for the 1996 Pontiac Trans Sport, the most popular in our inventory are:
Fuel Injector O-Ring Kit
from $7.49
(109)
Fuel Injector O-Ring Kit
Fuel Injector O-Ring Kits

What are the top-rated 1996 Pontiac Trans Sport Fuel and Emissions Systems?

Top-rated Fuel and Emissions Systems for your 1996 Pontiac Trans Sport based on customer reviews/ratings are:
Oxygen Sensor: 4 Wire, 16.54" Long, Heated, Exact Fit
from $39.99
(59)
Oxygen Sensor: 4 Wire, 16.54" Long, Heated, Exact Fit
“great product”
Oxygen Sensor: 4 Wire, 12.01" Long, Heated, Exact Fit
from $57.99
(47)
Oxygen Sensor: 4 Wire, 12.01" Long, Heated, Exact Fit
“thanks, glad in stock”
Locking Fuel Cap
from $23.99
(35)
Locking Fuel Cap
“Had a check engine light and when I scanned it, calls for a new gas cap. Instead of buying oem from the dealer or just an ordinary gas cap from a part”