1996 Mitsubishi Eclipse Exhaust Parts
More 1996 Mitsubishi Eclipse Exhaust Parts Categories
If you’re looking for an original Exhaust Parts replacement for a 1996 Mitsubishi Eclipse, you can search through our selection below. You’ll also find aftermarket and OEM Exhaust Parts to meet your needs.
Essential 1996 Mitsubishi Eclipse Exhaust Parts
MagnaFlow – HM Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.99004HM)
from
$222.99
MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99004HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – California Grade CARB Compliant Direct-Fit Catalytic Converter (Part No.457025)
from
$532.99
MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 457025 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 2001-2003 Mitsubishi Galant and 2002-2005 Mitsubishi Eclipse. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – OEM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.49349)
from
$611.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49349. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2006-2012 Mitsubishi Eclipse and 2004-2009 Mitsubishi Galant. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Dorman – Manifold Converter – Not Carb Compliant – Not For Sale – NY – CA – ME (Part No.674-821)
from
$562.99
This catalytic converter with integrated exhaust manifold – a.k.a. manifold converter – is precision-engineered to match the original equipment on specific vehicle years, makes and models for a reliable replacement.
Product Features:
See More
Product Features:
- Direct replacement – this manifold converter is designed to match the fit and performance of the original equipment on specific vehicles
- Convenient kit – includes gaskets and downpipe hardware to simplify installation
- Durable construction -manufactured within strict tolerances for reliable longevity
- Trustworthy value – backed by team of engineers and quality control experts in the United States
BRExhaust – Exhaust Hanger (Part No.255-042)
from
$13.79
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust insulator mounts will help to keep your components in the right position, resulting in a longer lifespan for your exhaust system.
Product Features:
See More
Product Features:
- Exhaust accessory that enables a complete installation process
- Precise fitment
- Precise fitment
- Manufactured according to strict OE standards
- Reduced Vibration
Walker – Exhaust 35460 Exhaust System Hanger Insulator (Part No.35460)
from
$6.79
Complete your exhaust repair with Walker® insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.
Product Features:
See More
Product Features:
- OE DESIGN — Designed with OE-style features for easy installation and fit
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
BRExhaust – Exhaust Products (Part No.284-175)
from
$202.99
Bosal is a leading worldwide manufacturer of OE, replacement, and high performance exhaust systems, catalytic converters, and related components. In North America, Bosal designs, develops, and manufactures original equipment exhaust systems for carmakers such as GM and Ford. Bosal supplies OE service products to many import / transplant carmakers including VW, Honda, Volvo, Subaru, and Mazda. Bosal also develops high performance exhaust for OEM port of entry and dealer programs. Bosal pioneered the manufacture of one-piece, direct-fit replacement exhaust systems more than twenty-five years ago. Today, Bosal remains the leader in direct-fit exhaust systems for import vehicles, and has expanded their program to include direct-fit catalytic converters for both the import and domestic aftermarket. Included in the catalytic converter program is their new line of Bosal Super-Cats and our most recent addition – Bosal’s line of CARB Approved Catalytic Converters.
Product Features:
See More
Product Features:
- One Piece, Direct Fit Unit that eliminates the need for cutting, pipe bending, or welding.
BRExhaust – Exhaust Products (Part No.283-225)
from
$204.99
Bosal is a leading worldwide manufacturer of OE, replacement, and high performance exhaust systems, catalytic converters, and related components. In North America, Bosal designs, develops, and manufactures original equipment exhaust systems for carmakers such as GM and Ford. Bosal supplies OE service products to many import / transplant carmakers including VW, Honda, Volvo, Subaru, and Mazda. Bosal also develops high performance exhaust for OEM port of entry and dealer programs. Bosal pioneered the manufacture of one-piece, direct-fit replacement exhaust systems more than twenty-five years ago. Today, Bosal remains the leader in direct-fit exhaust systems for import vehicles, and has expanded their program to include direct-fit catalytic converters for both the import and domestic aftermarket. Included in the catalytic converter program is their new line of Bosal Super-Cats and our most recent addition – Bosal’s line of CARB Approved Catalytic Converters.
Product Features:
See More
Product Features:
- One Piece, Direct Fit Unit that eliminates the need for cutting, pipe bending, or welding.
FELPRO – Exhaust Pipe Gasket (Part No.H4006826973FEL)
from
$23.14
Exhaust Pipe Gasket
Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.54364)
from
$176.99
Combining the only broad-market stainless-steel construction with a direct fit OE-style replacement, Walker® Quiet-Flow® SS muffler assemblies deliver longer life than typical aluminized mufflers and are available for domestic and foreign vehicles.
Product Features:
See More
Product Features:
- CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.942441)
from
$133.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.8042441)
from
$119.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Walker – Hanger Length 3 (Part No.35149)
from
$21.29
Complete your exhaust repair with Walker® exhaust hangers. Designed with OE-style features to support undercar exhaust components, Walker hangers are manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- OE DESIGN — Designed with OE-style features for easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS — Made from quality steel for durability and long life
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
HJS – Exhaust Hanger (Part No.H8050303706HJS)
from
$8.02
Exhaust Hanger
BRExhaust – Direct-Fit Premium Resonator Assembly – 284-063 (Part No.284-063)
from
$191.99
BRExhaust Direct-Fit Exhaust Resonator and Pipe AssemblyBRExhaust direct-fit exhaust resonator and pipe assemblies are designed to install easily and help you retain the OE exhaust sound you are looking for. Increase horsepower and torque with this corrosion resistant direct-fit component. Aluminized steel construction ensures maximum durability.
Product Features:
See More
Product Features:
- Direct-fit configuration
- Easy Installation
- Engineered to provide excellent exhaust performance
- Made from 16-gauge aluminized tubing
- Increases horsepower and torque
- Corrosion resistant
- Built to OEM specifications
Victor Reinz – Exhaust Manifold Gasket Set (Part No.71-10234-00)
from
$22.29
As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Felpro – Exhaust Manifold Gasket Set (Part No.MS 95711)
from
$16.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
Ishino – Exhaust Manifold Gasket (Part No.A8111169453ISH)
from
$23.98
Exhaust Manifold Gasket
Victor Reinz – Exhaust Manifold Gasket Set (Part No.11-10228-01)
from
$26.49
As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Felpro – Exhaust Pipe Flange Gasket (Part No.60817)
from
$6.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.61016)
from
$24.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Walker – 3 Bolt Exhaust Pipe Flange Gasket: Metal with Fiber, Heat Resistant, Premium Materials (Part No.31528)
from
$9.99
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
BRExhaust – Exhaust Flange Gasket (Part No.256-790)
from
$8.79
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.
Product Features:
See More
Product Features:
- Designed to facilitate hassle-free exhaust repair
- Precise fitment
- Manufactured from quality materials to ensure maximum durability
- Designed for a leak free connection
- OE structure and design
- Built to OEM specifications
- Secure gas-tight connection
BRExhaust – Direct-Fit Premium Pipe – 753-255 (Part No.753-255)
from
$181.99
BRExhaust Replacement Exhaust PipeBRExhaust exhaust pipes are manufactured to exacting standards and are based on the original OEM design for a guaranteed perfect fit. All BRExhaust pipes are made from aluminized steel. The exact fit, easy installation, durability and enduring functionality of BRExhaust’s OE replacement exhaust pipes instantly equip your ride with optimally restored emission control.
Product Features:
See More
Product Features:
- Manufactured according to strict OE standards
- Sturdy design featuring premium-grade materials
- Precise fitment
- Hassle-free installation and functionality verified by comprehensive testing procedures
- Easy installation
- Direct-fit exhaust system component that saves installation time
BRExhaust – Direct-Fit Premium Front Pipe (Part No.700-109)
from
$88.99
BRExhaust exhaust pipes are designed for easy bolt-on installations. Thicker gauge metal prevents the need for flow-resistant wrinkle bends, thereby enhancing overall exhaust performance. This pipe is engineered to meet OE specs to ensure performance, reliability and a precise factory-like fit. This part features a direct-fit design allowing for easy installation. If you are looking for a replacement exhaust pipe that will fit and perform exactly like the stock one while lasting even longer, BRExhaust is the brand you can rely on.
Product Features:
See More
Product Features:
- Manufactured according to strict OE standards
- Sturdy design featuring premium-grade materials
- Precise fitment
- Hassle-free installation and functionality verified by comprehensive testing procedures
- Easy installation
- Direct-fit exhaust system component that saves installation time
BRExhaust – Direct-Fit Premium Front Pipe (Part No.753-275)
from
$283.99
BRExhaust exhaust pipes are designed for easy bolt-on installations. Thicker gauge metal prevents the need for flow-resistant wrinkle bends, thereby enhancing overall exhaust performance. This pipe is engineered to meet OE specs to ensure performance, reliability and a precise factory-like fit. This part features a direct-fit design allowing for easy installation. If you are looking for a replacement exhaust pipe that will fit and perform exactly like the stock one while lasting even longer, BRExhaust is the brand you can rely on.
Product Features:
See More
Product Features:
- Manufactured according to strict OE standards
- Sturdy design featuring premium-grade materials
- Precise fitment
- Hassle-free installation and functionality verified by comprehensive testing procedures
- Easy installation
- Direct-fit exhaust system component that saves installation time
Walker – Front Pipe Aluminized 16.25" (Part No.52540)
from
$138.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Popular 1996 Mitsubishi Eclipse Exhaust Parts Categories
1996 Mitsubishi Eclipse Exhaust Parts
You count on your 1996 Mitsubishi Eclipse to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 33 Exhaust Parts ranging in price from $3.49 to $438.99, you’re sure to find everything you need for your 1996 Mitsubishi Eclipse.
Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 11 different brands like Walker, Felpro, and MagnaFlow. 1996 Mitsubishi Eclipse Exhaust Parts start as low as $3.49!
One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 294 extensive product reviews on 1996 Mitsubishi Eclipse Exhaust Parts. Some of the top-rated Exhaust Parts products we carry are 40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound with 5.0 stars.
Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 1996 Mitsubishi Eclipse below to get started!
Top-Rated Exhaust Parts Brands For Your 1996 Mitsubishi Eclipse
Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1996 Mitsubishi Eclipse running right for years to come. In our inventory you’ll find brands like Walker, Felpro, MagnaFlow, and even more.
Popular Felpro Exhaust Parts
You’ll find popular Felpro brand products across Exhaust Pipes. All are waiting to get your 1996 Mitsubishi Eclipse back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated Walker Exhaust Parts
If Walker are what you’re looking for, our inventory holds plenty. We stock Walker brand Exhaust Parts for your 1996 Mitsubishi Eclipse, and some of our most reviewed Walker parts include:
from
$9.99
(23)
3 Bolt Exhaust Pipe Flange Gasket: Metal with Fiber, Heat Resistant, Premium Materials
Exhaust Pipe and Flange Gaskets
from
$5.49
(5)
2 Bolt Exhaust Pipe Flange Gasket: Metal, Heat Resistant, Premium Materials
Exhaust Pipe and Flange Gaskets
FAQs for 1996 Mitsubishi Eclipse Exhaust Parts
What are the most purchased Exhaust Parts for the 1996 Mitsubishi Eclipse?
Out of 33 Exhaust Parts for the 1996 Mitsubishi Eclipse, the most popular in our inventory are:
from
$178.99
(5)
HM Grade Federal / EPA Compliant Universal Catalytic Converter
Catalytic Converters
What are the top-rated 1996 Mitsubishi Eclipse Exhaust Parts?
Top-rated Exhaust Parts for your 1996 Mitsubishi Eclipse based on customer reviews/ratings are:
from
$133.99
(1)
40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound
“I installed this on my 1969 Mustang. The fit was perfect even though I went with an odd size (2 1/4), But that’s exactly what I wanted. The build of t”
