1996 Mercedes-Benz E320 Steering and Chassis Parts

Name: Premium OE Oil Filter: Ideal for OE Synthetic Specified Oil, OE Quality,Reliability & Fit
Brand: Mann-Filter
SKU: H85
Price: 6.99 USD

Below you will find various in-demand Mercedes-Benz Steering and Chassis Parts, components and accessories for your 1996 E320. Advance Auto Parts has popular E320 parts like Power Steering Parts, Sway Bars, Tie Rods and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other E320 model years including 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 and more. Select a category of 1996 Mercedes-Benz E320 Steering and Chassis Parts below and start saving instantly.

Popular 1996 Mercedes-Benz E320 Steering and Chassis Parts Categories

Suspension Ball Joint Kits

Power Steering Filters

Lower Control Arm and Ball Joints

Tie Rod Ends

Subframe Bushings

Power Steering Pressure Hoses

Rack and Pinion Boots

Rack and Pinion Seals

Pump Shaft Seals

Rack and Pinion Bellow Clamps

MOOG, Subframe Bushings

Power Steering O-Rings

Essential Steering and Chassis Parts for 1996 Mercedes-Benz E320s

from

$6.99

More and more performance, less and less consumption – in order to meet the high demands placed on modern engines, automobile manufacturers demand the absolute highest levels of performance from the engine components used. The oil circuit is of central importance here, as only clean engine oil can permanently ensure consistent engine performance. If the circulating oil is not permanently freed of impurities and combustion residues, protection from wear is no longer guaranteed. In the worst case, this may even damage the engine. If you want to play it safe when choosing an oil filter, choose MANN-FILTER. They are designed for modern high-performance oils and can stand up to even the most demanding technical challenges. As the application areas of oil filters and the demands placed on them vary, MANN-FILTER oil filters are available in different designs.

Product Features:

Outstanding dirt holding capacity
Prolongs service intervals and continues to meet the technical requirements of high-performance engines
Offers even faster and optimized oil supply when starting the engine

from

$5.68

The Febi Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$143.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$5.27

P/S Hose O-Ring

from

$14.56

Differential Mount

from

$135.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$29.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$117.88

The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering

from

$24.99

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
One piece neoprene boot (this is not a split boot)
Includes boot and two clamps for complete installation.
Quality construction for durability
Application specific for this vehicle

from

$421.91

P/S Pump

from

$96.43

The Febi subframe bushing kit is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$56.96

The ultimate in safety and quality in steering and suspension is what sets LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions – as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering

from

$4.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$71.15

Due to their flexibility and ruggedness, these dampers have proven themselves as reliable partners outside of vehicle construction wherever vibrations had to be reduced and safely dampened. The diaphragm against the outside of the pressure tube can easily absorb the additional piston rod volume, resulting in slip-free force transmission in any mounting orientation. Due to the special piston system with valve plates, the damping forces can be set variably and virtually independently of each other. The TA20 is the standard version of this damper, which has a proven track record in numerous applications. The TA30 and TA40 variants are special designs, which will be customized for higher loads according to your requests after consultation with our product developers.

Product Features:

Damping forces up to 3000 N in tension and compression direction
Damping forces can be set independently of each other in both directions at the factory
Non-pressurized, no extension force
Positive, direct instant damping

from

$98.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$478.99

CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:

Protective coating applied to each unit to extend the life of the unit (where applicable).
100% performance testing to ensure perfect fit, function and reliable performance.
100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$37.99

Matches OE form, fit and function
Coated or plated for corrosion protection
Necessary hardware supplied as needed for a complete installation
Hardware functionality matches original design requirements
Application specific for this vehicle

from

$95.99

Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

Hardened ball stud made of OE equivalent or better materials to withstand higher loads
Easy to install.
Construction and design validated by MOOG engineers
Premium forged housing with increased cross section of up to 52% more material in key areas
Broad coverage for foreign and domestic applications
Designed to meet or exceed original equipment performance

from

$6.90

Tie Rod Bushing

from

$4.05

The Febi Steering Rack Boot Clamp is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Manufactured to meet or exceed OE specifications

from

$124.99

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

from

$327.18

The Original Equipment Power Steering Pressure Line Assembly is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$54.27

The Lemfoerder Control Arm Strut is manufactured using only the highest quality materials and is designed to maintain OE suspension geometry. Lemfoerder uses only OE style bushings and ball joints minimizing road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
OE Bushings and Ball Joints
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$75.28

Bilstein B4 Series gas pressure steering dampers are specifically designed to be the economical choice for replacing the steering damper on your vehicle. The B4 Series steering dampers are rigorously engineered to meet OE standards and identically replicate the performance of the original damper on your vehicle. These dampers are the ideal option for the driver looking to maintain the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.

Product Features:

Engineered to meet OE standards
Maintains the original performance
Black paint finish

Upgrade your 1996 Mercedes-Benz E320 with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 1996 Mercedes-Benz E320, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercedes-Benz or enhancing its overall performance, Steering and Chassis Parts are key to keeping your E320 functioning at its best. At Advance Auto Parts, we offer a wide selection of 55 Steering and Chassis Parts for the 1996 Mercedes-Benz E320, designed to meet your needs without breaking the bank. From Power Steering Part replacements to Sway Bars upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 1996 Mercedes-Benz E320 at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $4.05 to $747.76, with an average price of $84.91. Our 55 Steering and Chassis Parts in stock come from 21 trusted brands, so you’re sure to find the right part for your 1996 Mercedes-Benz E320 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1996 Mercedes-Benz E320, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Cardone Moog, and more. Cardone Steering and Chassis Parts start at just $31.99 and boast an impressive 4 stars average rating from customers. With 65 customer reviews and counting, our 1996 Mercedes-Benz E320 Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1996 Mercedes-Benz E320 is always ready to roll. We’re committed to providing you with everything you need to keep your E320 in top shape, all in one place. Start shopping confidently below for your 1996 Mercedes-Benz E320!

Best-Selling Power Steering Parts for 1996 Mercedes-Benz E320s

Enhance the driving experience in your Mercedes-Benz with 20 quality Power Steering Part components, starting at $4.05.

show more show less

from

$48.49

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$46.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$31.99

In-line filter with serviceable filter element.
Patented built-in bypass that filters up to 190 micron particles.
Designed to extend the life of the steering system.
Sure-grip barb connections are included to ensure proper hose fitment.

from

$31.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$31.49

Product Features:

Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
Small size provides an easy fit, even in cramped systems
Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
Filter can be easily serviced, extending its functional lifespan considerably

from

$4.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$221.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$747.76

Maval Manufacturing is a Global leader in the production of remanufactured steering racks that meet or exceed the OE requirements set by the vehicle manufacturers. Maval uses only the highest quality OE parts in the remanufacturing process and each unit goes through a comprehensive inspection process that must meet OE performance specifications.

Product Features:

OE quality and direct fit replacement
Remanufacture based on highest quality standards
Computerized tests insure that all products meet the OE performance specification.
Performance and quality approvals from OE steering gear and pump manufacturers world wide

from

$674.99

Protective coating applied to each unit to extend the life of the unit (where applicable).
100% performance testing to ensure perfect fit, function and reliable performance.
100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$656.99

Protective coating applied to each unit to extend the life of the unit (where applicable).
100% performance testing to ensure perfect fit, function and reliable performance.
100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$143.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$123.99

Rein power steering hoses are manufactured with premium ContiTech OE quality hose material designed to withstand the high pressure demands of automotive power steering systems. Rein power steering hoses are designed to resist excessive heat, oil and ozone factors that breakdown rubber and cause premature failure in power steering systems.

Product Features:

Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
Designed as direct-fit replacements to ensure trouble-free proper installation.
Complete with hardware and seals when necessary for installation to save installation time and additional costs.
Restores your vehicle to safe and optimal performance levels.
Replacing both pressure and return hoses together ensures optimal performance and safety levels.

from

$45.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Protects Rack & Pinion surfaces from contamination
Hardware included

from

$29.04

Steering Rack Boot Kit

from

$28.99

All Steering Power Filter

from

$28.99

All Steering Power Filter

from

$28.99

POWER STEERINGFILTER

from

$24.99

Matches OE form, fit and function
One piece neoprene boot (this is not a split boot)
Includes boot and two clamps for complete installation.
Quality construction for durability
Application specific for this vehicle

from

$6.99

POWER STEERINGFILTER

from

$4.05

The Febi Steering Rack Boot Clamp is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Manufactured to meet or exceed OE specifications

Most Popular 1996 Mercedes-Benz E320 Sway Bars

Customize your Mercedes-Benz with 10 Sway Bars products like Sway Bar Link Kits and Sway Bar Bushings, all priced under $42.49.

show more show less

from

$9.99

Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.

from

$23.03

The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$19.30

The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$21.99

from

$42.49

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$30.99

Matches OE form, fit and function
Comes with necessary components and hardware for a complete installation
Hardware functionality matches original design requirements
Easy access wrench flat allows for the use of a socket for easy installation and removal
Application specific for this vehicle

from

$28.99

Matches OE form, fit and function
Comes with necessary components and hardware for a complete installation
Hardware functionality matches original design requirements
Easy access wrench flat allows for the use of a socket for easy installation and removal
Application specific for this vehicle

from

$15.15

The Febi Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$9.64

Sway Bar Link

from

$5.68

The Febi Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

Top Picks for 1996 Mercedes-Benz E320 Tie Rods

Upgrade Mercedes-Benz E320s with top-quality Tie Rods parts, including 8 OEM and aftermarket selections for your 1996 model.

show more show less

from

$29.99

from

$6.90

Tie Rod Bushing

from

$61.51

TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. TRW’s tie rod end joints includes the latest, high performance designs which incorporate the following features:

Product Features:

Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
Low friction plastic bearings that enhance damping and reliability
Manufactured using forged or cold formed steel
Two-seat design is standard, and eliminates the need for a spring
Top of the ball pins are polished
Salt Spray Test (240hrs)
Dynamic Test and Elasticity Test
Original Equipment quality hardware installation accessories

from

$33.98

FEBI Tie rod ends strictly comply with the specification of the manufacturers providing; quality, performance and exact fitment. The FEBI tie rod ends ensures a comfortable driving experience and to prevent high-frequency vibrations being transferred to other parts.

Product Features:

Original Equipment Manufacturer
Larger diameter to increase the load carrying capacity
Outstanding slide properties
High ball stud articulation angles.

from

$91.78

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering

from

$83.99

Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Polished Stud ball provides low socket torque.
Stud design is optimized to provide ideal stud swing and strength for each application.

from

$76.49

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering

from

$59.99

Matches OE form, fit and function
Coated or plated for corrosion protection
Ball joint is pre-greased
Easy access wrench flat allows for the use of a socket for easy installation and removal
Full ball stud

In-Demand Gear Boxes for 1996 Mercedes-Benz E320s

Select from 1 premium Gear Boxes parts for your 1996 Mercedes-Benz E320.

show more show less

from

$71.15

Damping forces up to 3000 N in tension and compression direction
Damping forces can be set independently of each other in both directions at the factory
Non-pressurized, no extension force
Positive, direct instant damping

Most Sold 1996 Mercedes-Benz E320 Ball Joints

Explore our best-selling Mercedes-Benz parts for the 1996 E320 among 8 OEM and aftermarket options starting from $37.99.

show more show less

from

$95.99

Hardened ball stud made of OE equivalent or better materials to withstand higher loads
Easy to install.
Construction and design validated by MOOG engineers
Premium forged housing with increased cross section of up to 52% more material in key areas
Broad coverage for foreign and domestic applications
Designed to meet or exceed original equipment performance

from

$38.62

FEBI strictly complies with the specification of the vehicle manufacturers. They make sure that the ball joint exactly fit the corresponding vehicle type.

Product Features:

Original equipment quality
Solutions Made in Germany
Manufacturing expertise
Triple-checking system
Technology leader

from

$37.99

Matches OE form, fit and function
Coated or plated for corrosion protection
Necessary hardware supplied as needed for a complete installation
Hardware functionality matches original design requirements
Application specific for this vehicle

from

$78.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$109.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$90.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$89.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$52.34

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering

Top-Rated Steering and Chassis Parts Brands For Your 1996 Mercedes-Benz E320

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 1996 Mercedes-Benz E320s. Below you’ll find some of our best rated Steering and Chassis Parts from Cardone and Moog, and more. Steering and Chassis Parts from these brands that fit a 1996 E320 start at just $31.99 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Cardone 1996 Mercedes-Benz E320 Steering and Chassis Parts

When it comes to maintaining or upgrading your 1996 Mercedes-Benz E320, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Cardone ticks all of those boxes. We offer a wide selection of Cardone Steering and Chassis Parts, specifically designed for the 1996 Mercedes-Benz E320. With over 7 Cardone brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $31.99, with an average price of just $244.78. Plus, with over 62 customer reviews and an average rating of 4 stars, you can trust that our Cardone Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$31.99

This product is not rated

Power Steering Filter

“”

from
$674.99

This product is not rated

Remanufactured Rack and Pinion Assembly

“”

from
$221.99

This product is not rated

Remanufactured Power Steering Pump

“”

Popular Moog 1996 Mercedes-Benz E320 Steering and Chassis Parts

Moog auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 1996 Mercedes-Benz E320 owner should feel confident when installing genuine Moog parts in their vehicle. To ensure the best fit and performance for your 1996 E320, Advance Auto Parts carries a full inventory of 3 Moog Steering and Chassis Parts. Plus you will be keeping your Mercedes-Benz in peak condition while saving money because prices on these Moog Steering and Chassis Parts range from $83.99 to $109.99, plus, with more than 2 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

from
$109.99

This product is not rated

Control Arm and Ball Joint Assembly

“”

from
$95.99

(2)

Ball Joint

“perfect fit works great better than the other ball joint i bought somewhere else”

from
$83.99

This product is not rated

Steering Tie Rod End

“”

FAQs for 1996 Mercedes-Benz E320 Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 1996 Mercedes-Benz E320s?

Out of 55 Steering and Chassis Parts that fit 1996 Mercedes-Benz E320s, the following parts are the top sellers:

Power Steering Filter (10659735) – $31.99
Ball Joint Front Lower (20577663) – $37.99
Ball Joint (20519661) – $95.99

What’s the price range for 1996 Mercedes-Benz E320 Steering and Chassis Parts?

Steering and Chassis Part prices for the 1996 Mercedes-Benz E320 start at $4.05 and go up to $747.76 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 1996 Mercedes-Benz E320?

The average price for Steering and Chassis Parts for the 1996 Mercedes-Benz E320 is $84.91. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Mercedes-Benz E320 model years?

Yes, we currently carry Steering and Chassis Parts for 15 model years of Mercedes-Benz E320s between 1994 and 2009. Steering and Chassis Parts are bought most frequently for the following model years: 2009, 2008, 2007, 2006, 2005, 2004, 2003, 2002, and 2001.

What are the cheapest Steering and Chassis Parts for my 1996 Mercedes-Benz E320?

The cheapest 1996 Mercedes-Benz E320 Steering and Chassis Parts we carry in stock are:

Steering Rack Boot Clamp (11587000) – $4.05
Taper Bearing Cup (5052521) – $4.99
P/S Hose O-Ring (11874980) – $5.27
Sway Bar Bushing (11963004) – $5.68
Tie Rod Bushing (11984922) – $6.90

What types of Steering and Chassis Parts do you sell for my 1996 Mercedes-Benz E320?

As of 2/5/25, these are some of the most in-demand types of Steering and Chassis Parts for a 1996 Mercedes-Benz E320:

Can I get help with 1996 Mercedes-Benz E320 Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercedes-Benz Steering and Chassis Parts and more.

What is your return policy for Mercedes-Benz E320 Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Mercedes-Benz E320 Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1996 Mercedes-Benz E320 Steering and Chassis Parts

Mann-Filter – Premium OE Oil Filter: Ideal for OE Synthetic Specified Oil, OE Quality,Reliability & Fit (Part No.H85)

Febi – Sway Bar Bushing (Part No.L105075597FEB)

Powercraft – Rack Pinion Seal Kit (Part No.9111)

CRP – P/S Hose O-Ring (Part No.M2019375706CRP)

Rein – Differential Mount (Part No.J7070230984RIN)

Dorman – Suspension Control Arm And Ball Joint Assembly (Part No.520-963)

National – Multi Purpose Seal (Part No.710196)

Lemfoerder – ZF/Lemfoerder Tie Rod End (Part No.M3010148490LEM)

Beck/Arnley – Steering Rack Boot (Part No.103-2906)

Bosch – P/S Pump (Part No.M2010277093BOS)

Febi – Subframe Bushing Kit (Part No.L102197601FEB)

Lemfoerder – OE Replacement Ball Joint (Part No.L2020242060LEM)

Driveworks – Taper Bearing Cup (Part No.S-M-86610)

Stabilus – STAB-O-SHOC Steering Damper (Part No.M400036163STB)

MOOG – Stabilizer Bar Link Kit (Part No.K750722)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-4013)

Beck/Arnley – Ball Joint Front Lower (Part No.101-4831)

MOOG – Ball Joint (Part No.K9918)

International Suspension Group – Tie Rod Bushing (Part No.M300276578ISG)

Febi – Steering Rack Boot Clamp (Part No.M1011755121FEB)

Carquest Premium – Power Steering Pressure Hose Assembly, 14mm Banjo x 16mm Male "O" Ring (Part No.40020)

Original Equipment – Power Steering Pressure Line Assembly (Part No.M2015143348OEA)

Lemfoerder – OE Replacement Control Arm Strut (Part No.L201285193LEM)

Bilstein – B4 OE Replacement Steering Damper (Part No.M4000457556BIL)

Cardone – Power Steering Filter (Part No.20-0058F)

Cardone – Power Steering Filter (Part No.20-0012F)

Cardone – New Power Steering Filter (Part No.20-0038F)

Cardone – Power Steering Filter (Part No.20-P038F)

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Driveworks – Taper Bearing Cup (Part No.S-M-86610)

Cardone – Remanufactured Power Steering Pump (Part No.21-5021)

Maval – Complete Steering Rack, Remanufactured (Part No.M1000131735MAV)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-4000)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-4001)

Powercraft – Rack Pinion Seal Kit (Part No.9111)

Rein – Power Steering Pressure Hose Assembly (Part No.PSH0239)

Rare Parts – Rack & Pinion Bellows (Part No.RP26836)

Febi – Steering Rack Boot Kit (Part No.M103097599FEB)

BBB Industries – Power Steering Filter (Part No.991-FLT4)

BBB Industries – Power Steering Filter (Part No.991-FLT2)

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT3)

Beck/Arnley – Steering Rack Boot (Part No.103-2906)

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT1)

Febi – Steering Rack Boot Clamp (Part No.M1011755121FEB)

Rein – Sway Bar Link (Part No.SCL0222R)

Lemfoerder – Sway Bar Link (Part No.L103085215LEM)

Lemfoerder – Sway Bar Link (Part No.L103085218LEM)

Rein – Sway Bar Link (Part No.SCL0029P)

Rare Parts – Sway Bar Bushing (Part No.RP19247)

Beck/Arnley – Stabilizer End Link (Part No.101-4953)

Beck/Arnley – Stabilizer End Link (Part No.101-4952)

Febi – Sway Bar Link (Part No.L103016352FEB)

Autopart International Inc – Sway Bar Link (Part No.L10302052134API)

Febi – Sway Bar Bushing (Part No.L105075597FEB)

Rein – Inner Tie Rod (Part No.SCI0093R)

International Suspension Group – Tie Rod Bushing (Part No.M300276578ISG)

TRW – Tie Rod End (Part No.M301077064TRW)

Febi – FEBI Tie Rod End (Part No.M301077065FEB)

Lemfoerder – ZF/Lemfoerder Tie Rod End (Part No.M301077066LEM)

MOOG – Steering Tie Rod End (Part No.EV437)

Lemfoerder – Tie Rod End (Part No.M301077065LEM)

Beck/Arnley – Tie Rod End (Part No.101-4920)

Stabilus – STAB-O-SHOC Steering Damper (Part No.M400036163STB)

MOOG – Ball Joint (Part No.K9918)

Febi – Bilstein Ball Joint (Part No.L2020236770FEB)

Beck/Arnley – Ball Joint Front Lower (Part No.101-4831)

Dorman – Suspension Control Arm (Part No.522-107)

MOOG – Control Arm and Ball Joint Assembly (Part No.RK90422)

Dorman – Suspension Control Arm (Part No.520-751)

Dorman – Suspension Control Arm (Part No.520-752)

Lemfoerder – OE Replacement Ball Joint (Part No.L2020236770LEM)