1996 Mazda MX-6 Suspension Parts
More 1996 Mazda MX-6 Suspension Parts Categories
If you’re looking for an original Suspension Parts replacement for a 1996 Mazda MX-6, you can search through our selection below. You’ll also find aftermarket and OEM Suspension Parts to meet your needs.
Essential 1996 Mazda MX-6 Suspension Parts
Dorman – Suspension Lateral Link (Part No.522-575)
from
$97.99
This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Dorman – Control Arm Rear Lateral Link (Part No.521-239)
from
$72.99
This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
CTR – Control Arm (Part No.L200059416CTR)
from
$98.18
Control Arm
CTR – Control Arm (Part No.L200059417CTR)
from
$94.71
Control Arm
Driveworks – Strut Bellow (Part No.DW-K90460)
from
$11.99
Driveworks Shock Mount, Suspension Strut Bellows
Product Features:
See More
Product Features:
- Designed to meet or exceeds OE performance specifications
- Durable neoprene rubber
KYB – Jounce Bumper and Bellows (Part No.SB104)
from
$25.49
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
Monroe – Strut-Mate Strut Boot Kit (Part No.63619)
from
$21.49
Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.
Product Features:
See More
Product Features:
- REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
- PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
- KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
- ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
- PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
- EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
- BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
MOOG – Strut Bellows (Part No.K90460)
from
$34.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Engineered to meet or exceed OE requirements
- Incorporates proven design and engineering features
Driveworks – Strut Bellow (Part No.DW-K90463)
from
$7.99
Driveworks Shock Mount, Suspension Strut Bellows
Product Features:
See More
Product Features:
- Designed to meet or exceeds OE performance specifications
- Durable neoprene rubber
Monroe – Strut-Mate Strut Mounting Kit (Part No.902922)
from
$48.49
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
- EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
KYB – Excel-G Strut Assembly (Part No.L300034923KYX)
from
$79.93
The KYB Excel-G OE-equivalent direct fit Strut Assembly is engineered to restore the vehicle’s originally designed handling and control. The Excel-G Shocks are calibrated to compensate for worn suspensions and is a great choice to restore OE performance and original driving conditions. Restores a vehicle’s originally designed handling and control. The KYB Excel-G is identical to the GR2 except for the product name and paint color.
Product Features:
See More
Product Features:
- Direct fit application for ease of installation
- Calibrated to compensate for worn suspensions
- Components and valving are designed specifically for each application
- The best choice to restore OE performance and normal driving conditions
- Built with quality that matches or exceeds OE
- Coverage for domestic and import cars, trucks, vans, minivans, and SUV,s
KYB – Strut mount (Part No.SM5094)
from
$77.99
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.
Product Features:
See More
Product Features:
- The Highest Quality Replacement Strut Mount Available
- Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
- Superior Rubber Reduces Noise, Vibration And Harshness
- Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
- Matched Grade Studs And Nuts
Rare Parts – STRUT MOUNT (Part No.RP53228)
from
$133.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Meets or exceeds OE requirements
- Helps restore vehicle ride.
- Reduces tire wear
KYB – STRUT BELLOW (Part No.L303734949KYB)
from
$27.49
STRUT BELLOW
Carquest Premium – A/C Compressor Relay Connector (Part No.PTC1099)
from
$52.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
KYB – Excel-G Strut Assembly (Part No.L300034921KYB)
from
$78.63
The KYB Excel-G OE-equivalent direct fit Strut Assembly is engineered to restore the vehicle’s originally designed handling and control. The Excel-G Shocks are calibrated to compensate for worn suspensions and is a great choice to restore OE performance and original driving conditions. Patented valving plus pressurized nitrogen gas account for riding comfort and, at the same time, dramatically reduce the aeration or foaming that commonly occur in shock absorber and cause its performance to start fading, even after only a few minutes in operation.
Product Features:
See More
Product Features:
- Restores OE performance
- One way anti-foaming valve reduces foaming and performance fade
- Three stage dual valving
- Teflon coated piston valve
- Seamless inner cylinder and eye ring, no leaks
- Bonded bushings and sleeves
- Hard chromed piston rod
KYB – Excel-G Strut Assembly (Part No.L300034922KYX)
from
$80.13
The KYB Excel-G OE-equivalent direct fit Strut Assembly is engineered to restore the vehicle’s originally designed handling and control. The Excel-G Shocks are calibrated to compensate for worn suspensions and is a great choice to restore OE performance and original driving conditions. Restores a vehicle’s originally designed handling and control. The KYB Excel-G is identical to the GR2 except for the product name and paint color.
Product Features:
See More
Product Features:
- Direct fit application for ease of installation
- Calibrated to compensate for worn suspensions
- Components and valving are designed specifically for each application
- The best choice to restore OE performance and normal driving conditions
- Built with quality that matches or exceeds OE
- Coverage for domestic and import cars, trucks, vans, minivans, and SUV,s
Rare Parts – Control Arm Bush (Part No.RP18171)
from
$59.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Torsional rubber bushings
- UV resistant
- No Squeak
Terada – Control Arm Bushing (Part No.L2030164872TER)
from
$24.67
The Terada Control Arm Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application.
- Meets or exceeds the OE specifications.
- Designed to reduce vibration and absorb noise.
Popular 1996 Mazda MX-6 Suspension Parts Categories
1996 Mazda MX-6 Suspension Parts
You count on your 1996 Mazda MX-6 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 22 Suspension Parts ranging in price from $7.99 to $98.99, you’re sure to find everything you need for your 1996 Mazda MX-6.
Brands matter. If you want to shop a specific Suspension Parts brand, we stock 8 different brands like Driveworks, Moog, and KYB. 1996 Mazda MX-6 Suspension Parts start as low as $7.99!
One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 128 extensive product reviews on 1996 Mazda MX-6 Suspension Parts. Some of the top-rated Suspension Parts products we carry are Strut-Mate Strut Boot Kit with 4.6 stars and Jounce Bumper and Bellows with 3.3 stars.
Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 1996 Mazda MX-6 below to get started!
Top-Rated Suspension Parts Brands For Your 1996 Mazda MX-6
Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1996 Mazda MX-6 running right for years to come. In our inventory you’ll find brands like Driveworks, Moog, KYB, and even more.
Popular Driveworks Suspension Parts
You’ll find popular Driveworks brand products across Shocks and Struts. All are waiting to get your 1996 Mazda MX-6 back on the road. Some of the top-rated Driveworks products in these categories are:
Top-Rated MOOG Suspension Parts
If MOOG are what you’re looking for, our inventory holds plenty. We stock MOOG brand Suspension Parts for your 1996 Mazda MX-6, and some of our most reviewed MOOG parts include:
FAQs for 1996 Mazda MX-6 Suspension Parts
What are the most purchased Suspension Parts for the 1996 Mazda MX-6?
Out of 22 Suspension Parts for the 1996 Mazda MX-6, the most popular in our inventory are:
from
$52.99
This product is not rated
A/C Compressor Relay Connector
Active Suspension Relay Connector
What are the top-rated 1996 Mazda MX-6 Suspension Parts?
Top-rated Suspension Parts for your 1996 Mazda MX-6 based on customer reviews/ratings are:
from
$27.99
(5)
Strut-Mate Strut Boot Kit
“A Little different than the OEM part but worked just fine. American Made always a PLUS.”
from
$25.49
(3)
Jounce Bumper and Bellows
“the KYB dirt cover and rebound bumper fit as advertised. the quality looks to be good. what more can i say right now?”
