1996 Jaguar XJR Steering and Chassis Parts
More 1996 Jaguar XJR Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1996 Jaguar XJR, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1996 Jaguar XJR Steering and Chassis Parts
Cardone – Rack and Pinion Assembly (Part No.26-6001)
from
$419.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100% replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Lemfoerder – Lemfoerder Steering Rack Boot (Part No.M1010156586LEM)
from
$16.02
The Lemfoerder Steering Rack Boot is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Manufactured to meet or exceed OE specifications
Cardone – Power Steering Filter (Part No.20-0012F)
from
$46.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Cardone – Power Steering Filter (Part No.20-0038F)
from
$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
MTC – Subframe Bushing (Part No.L102052585MTC)
from
$13.27
The MTC subframe bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
APA/URO Parts – Subframe Bushing (Part No.L1020111567APA)
from
$53.91
The APA/URO subframe bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Meyle – Tie Rod End (Part No.M3010945983MEY)
from
$49.48
Meyle tie rod ends meet OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. Meyle tie rod ends are manufactured to exacting OE tolerances for a proper fit and function.
Product Features:
See More
Product Features:
- Original Equipment quality
- Coated surface to prevent corrosion and rust
- Fatigue tested for structural integrity
- Precision made components for an ideal fit and function
- Adjustable for proper alignment
- Premium Polychloroprene rubber boots
Delphi – Tie Rod End (Part No.M30103127165DEL)
from
$72.48
Tie Rod End
A.P.A. URO – P/S Reservoir (Part No.M2030126181APA)
from
$202.43
P/S Reservoir
Eurospare – Fuel Filter O-Ring (Part No.E1015121405ESP)
from
$4.00
Fuel Filter O-Ring
Driveworks – Tapered Roller Bearing (Part No.S-HM-89410)
Driveworks – Taper Bearing Cone (Part No.S-M-88048)
from
$11.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Carquest Premium – Pressure Line Hose Assembly (Part No.37937)
from
$76.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature wear and tear.
Product Features:
See More
Product Features:
- Switch sockets allow re-installation of OE pressure sensors
- Zinc coated tubes protect against rust and corrosion
- Banjo end lock tabs prevent hose end from loosening
- Double lock beading with barbed tube end provides superior hose/coupling integrity
- Heat/abrasion tubing protects vital areas
- Restrictor helps absorb vibration and reduce noise
- Movable mount bracket for easy, secure installation
- Silver heat guard protects hose in high heat areas
- Original style fittings, no adapters required
Cardone – Power Steering Pump (Part No.21-133)
from
$113.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Cardone – Power Steering Pump (Part No.21-5210)
from
$175.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Burgaflex – Sway Bar Bushing (Part No.L1050108345BUR)
from
$6.08
Sway Bar Bushing
Febi – Sway Bar Bushing (Part No.L1050741000FEB)
from
$15.03
The Febi Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Eurospare – P/S Return Hose (Part No.M2016107173ESP)
from
$170.66
P/S Return Hose
Eurospares – Power Steering Return Hose (Part No.M2016103871ESP)
from
$79.55
This OE quality power steering hose is the perfect replacement hose to meet the high demands placed on systems like power steering.
Product Features:
See More
Product Features:
- Manufactured as a direct OE replacement
- Pressure tested to maintain a consistent flow
- Backed by the manufactures warranty against workmanship and material defects
Powercraft – Pump Seal Kit (Part No.8834)
from
$65.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Rare Parts – Ball Joint (Part No.RP11853)
from
$51.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
Lemfoerder – OE Replacement Ball Joint (Part No.L2020383436LEM)
from
$79.44
The ultimate in safety and quality in steering and suspension is what sets LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions – as service and costs only meet the customer’s demands when high quality is implemented systematically.
Product Features:
See More
Product Features:
- OE expertise and quality
- Precision manufactured housing and components
- Corrosion protection
- Permanently attached boot
- One-piece forged housing for easier steering
Lemfoerder – OE Replacement Ball Joint (Part No.L202037407LEM)
from
$86.12
The ultimate in safety and quality in steering and suspension is what sets LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions – as service and costs only meet the customer’s demands when high quality is implemented systematically.
Product Features:
See More
Product Features:
- OE expertise and quality
- Precision manufactured housing and components
- Corrosion protection
- Permanently attached boot
- One-piece forged housing for easier steering
Lemfoerder – OE Replacement Ball Joint (Part No.L2020103695LEM)
from
$68.20
The ultimate in safety and quality in steering and suspension is what sets LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions – as service and costs only meet the customer’s demands when high quality is implemented systematically.
Product Features:
See More
Product Features:
- OE expertise and quality
- Precision manufactured housing and components
- Corrosion protection
- Permanently attached boot
- One-piece forged housing for easier steering
Rare Parts – Sway Bar Link (Part No.RP19983)
from
$107.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
MOOG – Suspension Stabilizer Bar Link (Part No.K80458)
from
$19.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- Incorporates proven design and engineering features
MOOG – Suspension Stabilizer Bar Link (Part No.K750059)
from
$43.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
MOOG – Stabilizer Bar Link (Part No.K750339)
from
$49.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Popular 1996 Jaguar XJR Steering and Chassis Parts Categories
1996 Jaguar XJR Steering and Chassis Parts
You count on your 1996 Jaguar XJR to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 28 Steering and Chassis Parts ranging in price from $4.00 to $788.08, you’re sure to find everything you need for your 1996 Jaguar XJR.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 16 different brands like Cardone, National, and Edelmann. 1996 Jaguar XJR Steering and Chassis Parts start as low as $4.00!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 64 extensive product reviews on 1996 Jaguar XJR Steering and Chassis Parts.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1996 Jaguar XJR below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1996 Jaguar XJR
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1996 Jaguar XJR running right for years to come. In our inventory you’ll find brands like Cardone, National, Edelmann, and even more.
Popular MOOG Steering and Chassis Parts
You’ll find popular MOOG brand products across Sway Bars and Tie Rods. All are waiting to get your 1996 Jaguar XJR back on the road. Some of the top-rated MOOG products in these categories are:
Top-Rated Cardone Steering and Chassis Parts
If Cardone are what you’re looking for, our inventory holds plenty. We stock Cardone brand Steering and Chassis Parts for your 1996 Jaguar XJR, and some of our most reviewed Cardone parts include:
FAQs for 1996 Jaguar XJR Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1996 Jaguar XJR?
Out of 28 Steering and Chassis Parts for the 1996 Jaguar XJR, the most popular in our inventory are:
from
$31.49
This product is not rated
Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles
Power Steering Filters
