1996 International 4900 Fuel and Emissions Systems
More 1996 International 4900 Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 1996 International 4900, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 1996 International 4900 Fuel and Emissions Systems
Carquest Premium – Injection Control Pressure (ICP) Sensor (Part No.AC20402)
from
$166.99
A critical component in the fuel injection system, the ICP sensor supplies the powertrain control module with injection control pressure, which is used to control injection quantity. Failure can result in poor drivability and/or illumination of the engine malfunction indicator or check engine lamp. New precision sensor is designed to meet or exceed OE performance specifications.
Product Features:
See More
Product Features:
- Original equipment fit, form and function
- Meets or exceeds OE performance specifications
- Premium materials ensure trouble-free operation
Carquest Premium – Fuel/Water Separator Spin-on with Open Port for Bowl (Part No.86232)
from
$77.99
Carquest spin-on fuel filters with open ends for bowls keep fuel clean and engines running at maximum efficiency. These filters feature a port designed to be used with the OE bowl.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Includes Port Thread: 3-12
Carquest Premium – Fuel Spin-on with Drain (Part No.86405)
from
$27.49
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Made in USA
- CAUTION: Furnished D-Ring must be installed on post for seal.
Carquest Premium – Valve Cover Gasket Connector Pigtail (Part No.AC20042)
from
$31.99
This repair solution allows for the replacement of broken, melted or damaged connector plugs, which can cause intermittent connections, resulting in engine misfire and hard-starting. New harness connector pigtail ensures proper electrical signals are supplied to the injectors and glow plugs.
Product Features:
See More
Product Features:
- Valve cover gasket connector pigtail connects between engine harness and valve cover gasket
- Two required per side
Carquest Premium – Fuel Injector and Glow Plug Harness (Part No.AC20112)
from
$61.99
This repair solution allows for the replacement of broken, melted or damaged connector plugs, which can cause intermittent connections, resulting in engine misfire and hard-starting. New harness connector pigtail ensures proper electrical signals are supplied to the injectors and glow plugs.
Product Features:
See More
Product Features:
- Harness connects between valve cover gasket connector and fuel injectors and glow plugs
- Two required per side
Dorman – Injector Wiring Harness (Part No.904-476)
from
$322.99
This replacement fuel injector harness matches the fit and function of the original equipment part to restore proper operation of the injection system. Made of quality materials, it features full insulated electrical connectors to prevent corrosion.
Product Features:
See More
Product Features:
- Ideal replacement – this fuel injector harness matches the original equipment part on specified vehicle years, makes and models
- Durable construction – this harness includes fully insulated electrical connectors to prevent corrosion
- Plug and play installation – made with factory-style connectors for quick, reliable installation
- Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life
Carquest Premium – Remanufactured Diesel High Pressure Oil Pump (Part No.AM92013)
from
$794.99
CARQUEST premium remanufactured high-pressure oil pumps are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each pump is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes pump gasket
Dorman – HD Solutions – Fuel Pump Repair Kit (Part No.285-5102)
from
$93.99
This diesel high pressure oil pump fitting kit is designed to match the original components required to repair the HPOP on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this diesel high pressure oil pump fitting kit is designed to match the original components required to repair the HPOP on specified vehicles
- Ideal solution – this HPOP kit is a reliable replacement for original components that are leaking or have failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Remanufactured Diesel High Pressure Oil Pump (Part No.AM92023)
from
$791.99
CARQUEST premium remanufactured high-pressure oil pumps are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each pump is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes pump gasket
Cardone – Injection Pressure Regulating Valve (Part No.2V-230)
from
$438.99
CARDONE Remanufactured Fuel Injection Regulating Valves control the pressure in the high pressure oil system which operates your injectors. Vehicle conditions such as poor idle, stalling, and no-start are some of the correctible symptoms. Each individual unit is completely disassembled and undergoes quality testing to ensure proper operating parameters to meet or exceed OEM performance.
Product Features:
See More
Product Features:
- Built and 100% tested to perform like the original, with all standard wear items replaced
- Air decay tested to ensure on-car performance
- Designed for easy installation and setup
- Guaranteed fit and function
- Meets or exceeds O.E.M. performance
Carquest – Fuel Injection Pressure Regulator (Part No.23076)
from
$244.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Application-specific to ensure the proper fit and form
- Precision-engineered pressure regulators for proper fuel delivery and engine performance
- As a global manufacturer, we have complete control of the manufacturing process, from components to finished product?
Carquest Premium – Fuel Injection Pressure Regulator Valve (IPR) (Part No.AC20072)
from
$589.99
Injection control pressure determines fuel injection quantity under varying engine operating conditions. Improper injection quantity can result in poor engine performance or a no-start condition. New IPR valve is manufactured to meet or exceed original equipment performance specifications to ensure precise control of injection oil pressure.
Product Features:
See More
Product Features:
- Original equipment fit, form and function
- Manufactured to precise OE performance specifications
Cardone – Injection Pressure Regulating Valve (Part No.2V-231)
from
$427.99
CARDONE Remanufactured Fuel Injection Regulating Valves control the pressure in the high pressure oil system which operates your injectors. Vehicle conditions such as poor idle, stalling, and no-start are some of the correctible symptoms. Each individual unit is completely disassembled and undergoes quality testing to ensure proper operating parameters to meet or exceed OEM performance.
Product Features:
See More
Product Features:
- Built and 100% tested to perform like the original, with all standard wear items replaced
- Air decay tested to ensure on-car performance
- Designed for easy installation and setup
- Guaranteed fit and function
- Meets or exceeds O.E.M. performance
Carquest Premium – Remanufactured Diesel Fuel Injector (Part No.AD25012)
from
$225.99
CARQUEST premium remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes 100% replacement of plunger and barrel to improve longevity over competitive units
- Includes all new premium quality O-rings and seals
- Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation
Carquest Premium – Remanufactured Fuel Injector (Part No.AD85111)
from
$512.99
Product Features:
See More
- Each unit is 100% tested to OE specifications
- Includes all new premium quality o-rings and seals
- Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation
Cardone – Fuel Injector (Part No.2J-408)
from
$355.99
CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.
Product Features:
See More
Product Features:
- All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
- Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
- All components are renewed or replaced as necessary to ensure high quality and durability
- When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
- Guaranteed fit and function
- Meets or exceeds O.E.M. performance
Cardone – Fuel Injector (Part No.2J-406)
from
$314.99
CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.
Product Features:
See More
Product Features:
- All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
- Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
- All components are renewed or replaced as necessary to ensure high quality and durability
- When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
- Guaranteed fit and function
- Meets or exceeds O.E.M. performance
Cardone – Fuel Injector (Part No.2J-403)
from
$442.99
CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.
Product Features:
See More
Product Features:
- All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
- Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
- All components are renewed or replaced as necessary to ensure high quality and durability
- When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
- Guaranteed fit and function
- Meets or exceeds O.E.M. performance
Carquest Premium – Fuel Injector Sleeve (Part No.AC20132)
from
$14.29
The injector sleeve provides sealing and cooling between the diesel fuel injector and cylinder head. Improper sealing can lead to combustion gas and coolant leaks into the fuel system, which can result in engine misfire and injector failure. Replacing the sleeve at time of injector service or replacement ensures proper sealing, improving injector longevity.
Product Features:
See More
Product Features:
- Original equipment fit, form and function
Carquest – Fuel Injector Seal Kit (Part No.27501)
from
$23.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- State-of-the-art designs that meet or exceed OE specifications
- Top-of-the-line quality and performance
- With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
- BWD is a global manufacturer of original equipment and aftermarket fuel injection products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest Premium – Fuel Injector Seal Kit (Part No.AC20012)
from
$21.99
Complete injector seal kit includes all six components necessary to properly reseal injector when reinstalled. All parts in kit are manufactured using premium OE quality materials.
Product Features:
See More
Product Features:
- Includes pink and blue high-pressure oil seals, black square oil seal, steel back-up ring, orange fuel seal and copper combustion seal
- Premium OE quality materials
- Services one injector
Carquest Premium – Diesel Fuel Injector Seal Kit (Part No.AC20442)
from
$19.29
Complete injector seal kit includes the seven components necessary to properly reseal injector when installed. All parts in kit are manufactured using premium OE quality materials.
Product Features:
See More
Product Features:
- Includes pink and blue high-pressure oil seals, black square oil seal, steel back-up ring and orange fuel seal
- Includes both copper and stainless-steel combustion seal
- Premium OE quality materials
- Services one injector
- Includes technical bulletin and installation tips
Popular 1996 International 4900 Fuel and Emissions Systems Categories
1996 International 4900 Fuel and Emissions Systems
You count on your 1996 International 4900 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 23 Fuel and Emissions Systems ranging in price from $14.29 to $791.99, you’re sure to find everything you need for your 1996 International 4900.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 5 different brands like Carquest Premium, Carquest, and Delphi. 1996 International 4900 Fuel and Emissions Systems start as low as $14.29!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 13 extensive product reviews on 1996 International 4900 Fuel and Emissions Systems.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1996 International 4900 below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 1996 International 4900
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1996 International 4900 running right for years to come. In our inventory you’ll find brands like Carquest Premium, Carquest, Delphi, and even more.
Popular Carquest Fuel and Emissions Systems
You’ll find popular Carquest brand products across Fuel Injectors. All are waiting to get your 1996 International 4900 back on the road. Some of the top-rated Carquest products in these categories are:
Top-Rated Carquest Premium Fuel and Emissions Systems
If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Fuel and Emissions Systems for your 1996 International 4900, and some of our most reviewed Carquest Premium parts include:
FAQs for 1996 International 4900 Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 1996 International 4900?
Out of 23 Fuel and Emissions Systems for the 1996 International 4900, the most popular in our inventory are:
from
$77.99
This product is not rated
Fuel/Water Separator Spin-on with Open Port for Bowl
Fuel and Water Separators
from
$791.99
This product is not rated
Remanufactured Diesel High Pressure Oil Pump
Diesel Injection High Pressure Oil Pumps
