1996 Ford Windstar Suspension Parts
More 1996 Ford Windstar Suspension Parts Categories
If you’re looking for an original Suspension Parts replacement for a 1996 Ford Windstar, you can search through our selection below. You’ll also find aftermarket and OEM Suspension Parts to meet your needs.
Essential 1996 Ford Windstar Suspension Parts
Carquest – A/C and Heater Relay (Part No.R3177)
from
$23.29
Product Features:
See More
- Premium components and our own manufactured circuit board ensure precise operation, reliability, and extra durability for a longer service life
- Our electronic voltage regulator PC boards are encapsulated in epoxy to deliver improved performance and resistance to failure that may be caused by vibration and corrosion of electrical connections
- All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.
MOOG – Strut Bellows (Part No.K90462)
from
$35.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Engineered to meet or exceed OE requirements
- Incorporates proven design and engineering features
Monroe – Load Adjusting Shock Absorber (Part No.58624)
from
$147.99
Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.
Product Features:
See More
Product Features:
- REDUCES SAG UNDER LOAD — Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
- EXCEPTIONAL HANDLING — Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
- CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
- LONGER SERVICE LIFE — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
- 5/8 nitrocarburized rod for long service life.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
MOOG – Coil Spring Set (Part No.CC875)
from
$131.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
Royal Purple – POWER STEERING FLUID (Part No.01326)
from
$6.29
POWER STEERING FLUID
Carquest Premium – Suspension Ride Height Switch (Part No.SBA1357)
from
$43.99
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.
Product Features:
See More
Product Features:
- High grade materials that are equal to or better
Monroe – OESpectrum Light Truck Shock Absorber (Part No.L4000569814MNR)
from
$75.08
TWIN TECHNOLOGY TUNED FOR EXCEPTIONAL CONTROL The Monroe OESpectrum shock absorbers feature our latest, global, original equipment valving technologies for domestic and foreign nameplate applications. Monroe OESpectrum units provide an unprecedented level of handling precision and control while filtering out ride harshness. This unique blend of control and comfort is made possible through Tenneco’s Twin Technology Active Control System, an exclusive internal damping control technology. Tenneco’s Twin Technology consists of the latest Impact Control Valve (ICV), delivers exceptional control by regulating the flow of fluid which helps control vehicle roll and isolate road impact, and a patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration, and harshness experienced with rough, bumpy road conditions.
Product Features:
See More
Product Features:
- All Weather Fluid – Contains special modifiers to reduce friction and ensure smooth rod reaction.
- Full Displaced Valving – Better valving range on both the compression and extension cycles.
- Fluon Banded Piston – The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
- 1-3/8 inch Bore – Lower operating pressure than standard 1 inch bore units.
- Twin Technology – Impact Control Valve (ICV), which delivers exceptional control under virtually all driving conditions, and a patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration and harshness.
- Nitrogen Gas Charged – For improved ride and handling, helps maintain tire to road contact by reducing aeration.
- 5/8inch Piston Rod – Heavy duty nitrocarburized rod* for long service life. (Non Dust Shield Units)
- Special Seal – Self-lubricating fluid seal designed to retain gas without excessive wear or friction.
Monroe – Strut-Mate Strut Boot Kit (Part No.63621)
from
$27.99
Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.
Product Features:
See More
Product Features:
- REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
- PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
- KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
- ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
- PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
- EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
- BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
Rare Parts – Coil Spring Insulator (Part No.RP46341)
from
$23.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Reduces road noise
- UV resistant
- No Squeak
Suncore – PassiveSuspConvKt (Part No.110F-30-R-KIT)
from
$139.99
PassiveSuspConvKt
MOOG – Strut Mount (Part No.K8677)
from
$42.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE requirements
- Superior rubber to steel bonding for durability
- High polish chrome steel bearing races
- Replacement helps restore vehicle handling
- Includes new spring seat insulator and installation hardware to eliminate noise issues
- Electroplate and corrosion-resistant coating to help prevent galvanic corrosion
TRW – Strut Assembly – Twin-tube Design (Part No.L3000851993TRW)
from
$104.88
TRW Shocks and Struts are intelligently engineered to restore original handling dynamics while designed to meet the highest safety, comfort, performance, and quality standards. TRW products have the best dampening characteristics with an application-tunedENDURANCE Polished Working Cylinder: SACHS working cylinders are drawn to precise dimensions and polished ultra-smooth to prevent piston band wear. Our technology permits close tuning tolerances while reducing friction and heat for the utmost endurance.
See More
MOOG – Coil Spring Seat (Part No.K80919)
from
$17.79
MOOG® Problem Solver® products incorporate proven design and engineering features for like new steering ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.
Product Features:
See More
Product Features:
- Protects spring and spring seat from damage
- Replacement helps to reduce noise
MOOG – Coil Spring Seat (Part No.K8997)
from
$28.99
MOOG® Problem Solver® products incorporate proven design and engineering features for like new steering ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.
Product Features:
See More
Product Features:
- Protects spring and spring seat from damage
- Replacement helps to reduce noise
Suncore – Shocks (Part No.110F-12-R-PAIR)
from
$99.99
Shocks
Suncore – Shock Kit (Part No.2-12S252700-001)
from
$64.99
Shock Kit
Sachs – Suspension Strut Bearing (Part No.L3035424230SAC)
from
$70.17
SACHS Suspension Strut Mount repair kits are designed to return the mount and bearing to Original Equipment standards.
Product Features:
See More
Product Features:
- SACHS Suspension Strut Mounts meet or exceed the OE designed specifications for the vehicle.
- SACHS Strut Mounts are designed to restore smooth steering while reducing vibrations and noise.
- It is highly recommended to replace your mounts, shocks and or struts in pairs.
Rare Parts – Strut Bearing (Part No.RP17184)
from
$49.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restore Strut pivot ability.
Dorman – Air Suspension Air Spring, Rear, With Hardware (Part No.949-272)
from
$391.99
This air suspension spring is designed to match the fit and function of the original spring on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this air suspension spring is designed to match the fit and function of the original spring on specified vehicle
- Restores functionality – reliable replacement for an original part that has failed due to internal rubber components that have torn or rotted
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Suncore – Air Spring (Part No.110F-15-R)
from
$99.99
Air Spring
Suncore – Complete Strut Assem (Part No.55S11030)
from
$94.99
Complete Strut Assem
Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-815165)
from
$91.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.
Product Features:
See More
Product Features:
- Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
- Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
- Springs are built with U.S. grade steel and designed to match factory ride height and performance
- OE quality strut mount, bearing plate and brackets
- Complete strut assembly is extensively tested for functionality and durability
- Built with a micro-smooth, chrome-plated piston rod
TRW – Control Arm (Part No.L2000201631TRW)
from
$91.36
TRW control arms can help improve fuel economy, emissions, energy savings, driving comfort and most important, safety. TRW provides hardware kits as standard on all ball joints, installation instructions and catalog information in all formats. Upper and lower Control Arms designed as:
Product Features:
See More
Product Features:
- Aluminium forged Control Arms
- Aluminium cast Control Arms – low weight/high performance
- Steel forged Control Arms
- Steel stamped Control Arms Ball Joints include the latest state-of-the-art high performance designs:
- Temperature resistant
- Low-torque/high comfort solution
- Ball stud diameters ranging from 25 to 42mm
- Integral and non-integral designs Built in Bushes:
- Rubber Bushes
- Rubber and Metal Bushes
- Hydraulic Bushes
TRW – Control Arm (Part No.L2000197443TRW)
from
$64.47
TRW control arms can help improve fuel economy, emissions, energy savings, driving comfort and most important, safety. TRW provides hardware kits as standard on all ball joints, installation instructions and catalog information in all formats. Upper and lower Control Arms designed as:
Product Features:
See More
Product Features:
- Aluminium forged Control Arms
- Aluminium cast Control Arms – low weight/high performance
- Steel forged Control Arms
- Steel stamped Control Arms Ball Joints include the latest state-of-the-art high performance designs:
- Temperature resistant
- Low-torque/high comfort solution
- Ball stud diameters ranging from 25 to 42mm
- Integral and non-integral designs Built in Bushes:
- Rubber Bushes
- Rubber and Metal Bushes
- Hydraulic Bushes
TRW – Control Arm (Part No.L2000197442TRW)
from
$87.41
TRW control arms can help improve fuel economy, emissions, energy savings, driving comfort and most important, safety. TRW provides hardware kits as standard on all ball joints, installation instructions and catalog information in all formats. Upper and lower Control Arms designed as:
Product Features:
See More
Product Features:
- Aluminium forged Control Arms
- Aluminium cast Control Arms – low weight/high performance
- Steel forged Control Arms
- Steel stamped Control Arms Ball Joints include the latest state-of-the-art high performance designs:
- Temperature resistant
- Low-torque/high comfort solution
- Ball stud diameters ranging from 25 to 42mm
- Integral and non-integral designs Built in Bushes:
- Rubber Bushes
- Rubber and Metal Bushes
- Hydraulic Bushes
MOOG – Control Arm Bushing (Part No.K8452)
from
$10.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Engineered to meet or exceed OE requirements
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
Rare Parts – Control Arm Bushing (Part No.RP16269)
from
$42.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Torsional rubber bushings
- UV resistant
- No Squeak
MOOG – Control Arm Bushing (Part No.K8415)
from
$20.99
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
- OE-STYLE DESIGN — Engineered to match or exceed OE requirements
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Bushings manufactured from high quality elastomer compounds for durability and ride performance
- Assembled with proper precompression for ultimate in performance and feel
Popular 1996 Ford Windstar Suspension Parts Categories
1996 Ford Windstar Suspension Parts
You count on your 1996 Ford Windstar to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 45 Suspension Parts ranging in price from $6.29 to $391.99, you’re sure to find everything you need for your 1996 Ford Windstar.
Brands matter. If you want to shop a specific Suspension Parts brand, we stock 13 different brands like Carquest, Monroe, and DriveWorks. 1996 Ford Windstar Suspension Parts start as low as $6.29!
One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 150 extensive product reviews on 1996 Ford Windstar Suspension Parts. Some of the top-rated Suspension Parts products we carry are Strut Bellows with 2.2 stars and Load Adjusting Shock Absorber with 5.0 stars.
Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 1996 Ford Windstar below to get started!
Top-Rated Suspension Parts Brands For Your 1996 Ford Windstar
Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1996 Ford Windstar running right for years to come. In our inventory you’ll find brands like Carquest, Monroe, DriveWorks, and even more.
Popular Monroe Suspension Parts
You’ll find popular Monroe brand products across Coil and Leaf Springs and Shocks and Struts. All are waiting to get your 1996 Ford Windstar back on the road. Some of the top-rated Monroe products in these categories are:
from
$186.99
(5)
Complete Strut Assembly: Includes Strut, Coil Spring, and Mount
Suspension Strut and Coil Spring Assemblies
Top-Rated Monroe Suspension Parts
If Monroe are what you’re looking for, our inventory holds plenty. We stock Monroe brand Suspension Parts for your 1996 Ford Windstar, and some of our most reviewed Monroe parts include:
from
$125.99
(5)
Complete Strut Assembly: Includes Strut, Coil Spring, and Mount
Front Shock and Struts
FAQs for 1996 Ford Windstar Suspension Parts
What are the most purchased Suspension Parts for the 1996 Ford Windstar?
Out of 45 Suspension Parts for the 1996 Ford Windstar, the most popular in our inventory are:
What are the top-rated 1996 Ford Windstar Suspension Parts?
Top-rated Suspension Parts for your 1996 Ford Windstar based on customer reviews/ratings are:
from
$35.99
(5)
Strut Bellows
“Replaced the stretched front bellows and cracked bushing stops on my 2005 Mini Cooper S. Didn’t plan to replace them, but when I got the front struts ”
from
$147.99
(4)
Load Adjusting Shock Absorber
“Product solved all the issues I had with my Ford Freestar minivan. Hauls my boat great. Went to OBX with everything including a tavel hitch loaded and”
