1996 Dodge Neon Cooling and Climate Controls

Below you will find various in-demand Dodge Cooling and Climate Controls, components and accessories for your 1996 Neon. Advance Auto Parts has popular Neon parts like Engine Cooling Parts, Air Conditioning Parts, Heating Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other Neon model years including 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 and more. Select a category of 1996 Dodge Neon Cooling and Climate Controls below and start saving instantly.

Popular 1996 Dodge Neon Cooling and Climate Controls Categories

Water Pump Housing Gaskets

Radiators

Water Pumps

AC Compressor With Clutch

Water Pump Inlet Tubes

Engine Cooling Fan Controllers

Engine Coolant Thermostat Housing Caps

Radiator Caps

AC Compressor Without Clutch

Thermostats

Engine Coolant Filler Necks

Engine Cooling Fans

Radiator Fan Motors

Thermostat and Water Outlet Assemblies

AC Clutch

AC Compressor Relays

Coolant Temperature Sensors

AC Condenser Fan Motors

Heater Cores

Engine Water Pump Inlet Pipe Gaskets

Coolant Reservoir Caps

Water Outlets

Blower Motor Resistors

AC Condensers

AC Line O-Rings

AC Compressor Cut-Out Relays

AC Evaporators

AC Caps and Valve Core Kits

AC Relay Connectors

Thermostat Seals

AC Compressor Cut-Out Relay Harness Connectors

Accumulator and Receiver Driers

AC O-Ring and Gasket Kits

AC Discharge Lines

Blower Motor Resistor Connectors

Water Pump Gaskets

AC Hose Assemblies

Blower Relays

Expansion Valve and Orifice Tubes

AC High Pressure Side Switches

Radiator Drain Plugs

AC Compressor Cut-Off Switches

HVAC Blower Motor Connectors

AC Switch Connectors

AC Compressor Clutch Connectors

Coolant Temp Sending Unit Switch Connectors

Water Pump Housing O-Rings

AC Compressor Seals

AC Line Clip

HVAC Temperature Delay Relay Harness Connectors

Essential Cooling and Climate Controls for 1996 Dodge Neons

from

$14.29

OE style connectors; Molded plastic construction; Quality contacts ensure proper conductivity; Universal applications

from

$87.99

New Platinum Pro A/C Condenser, 2.0 Liter Engines

Product Features:

2.0 Liter Engines, Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$127.97

Plastic Tank / Aluminum Core Radiator METRIX OE Style Aluminum Core Radiators are guaranteed to match the exact specifications as the factory installed radiator. METRIX provides an OE quality part that will fit the same as the original manufacturer’s product with no need to drill holes, move fittings, or stretch hoses. All METRIX radiators, tanks, cores, dimensions and materials meet the vehicle manufacturer’s strict OE standards and are required to pass rigorous performance and durability tests. METRIX radiators are packaged with all necessary accessories for a successful install, including cooler fittings, fan shroud clips, and mounting brackets.

Product Features:

OE Quality – Higher quality and reliable performance compared to competitive products
Exact fit – No additional time consuming steps needed for installation
OE Engineered – Lightweight and improved engine cooling performance
Aluminum Core – Advanced design for optimum heat transfer
Oil Cooler – Integrated OE design for efficient thermal management

from

$19.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$1.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$33.49

This engine water pump inlet tube is designed to match the fit and function of the original tube on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this engine water pump inlet tube is designed to match the fit and function of the original tube on specified applications.
Restores functionality – reliable replacement for an original part that has failed due to corrosion from heat and water cycling.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$43.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$13.49

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Safety lever to vent coolant pressure before removal
Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$53.99

Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$1.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$17.05

Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$20.79

This premium upgraded thermostat is everything you were looking for. UltraStat Thermostats are the toughest thermostats on the market. All heavy gauge stainless steel construction provides long-life durability, as well as complete corrosion resistance. Exclusive BLVT Valve technology minimizes thermal shock to cooling system components. This is the perfect upgrade to help insure your cooling system is working exactly as you need and expect it to for longevity.

Product Features:

Heavy gauge stainless steel components offer increased reliability and long-lasting durability
Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
AccuSpring Design for stable temperature control and increased cabin comfort

from

$58.99

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Our control modules feature double wire bonds for better connections, greater dependability and longer life despite being subjected to intense vibration and the tough operating environment
Copper slug heat sinks provide better heat dissipation to prevent heat from damaging the module
Our ignition modules will respond to a weak signal from the crankshaft position sensor and begin energizing the coils immediately for better starts in cold weather
High-temperature polymer housing reducing moisture intrusion and minimizes vibration damage for extended life and improved reliability
Our ignition modules are durability tested for 500 thermal cycles ranging from -40C to +125C

from

$7.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$76.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Improved 2 terminal design replacing older 1 terminal switch

from

$17.79

Compatible with both R12 And R134a refrigerants; All the seals needed to complete the job; SUV And rear air applications; Application specific

from

$75.99

New Standard Replacement A/C Receiver Drier, L4 Engine

Product Features:

L4 Engine
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$326.99

Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.
Matched high-quality needle-roller bearing ensures low friction and high load capability
Limited Lifetime Warranty when following warranty requirements: Flush A/C System, replace accumulator/receiver dryer, replace orifice tube/expansion device, and filling with correct oil and refrigerant

from

$11.49

Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:

Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap.
Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
Seamless fit – reverse-engineered from the original equipment to fit perfectly
Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership

from

$14.29

This HVAC switch connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this HVAC switch connector matches the appearance and function of the factory hardware on specified applications.
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$26.99

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$126.99

Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
O-Rings and gaskets necessary for installation are included.

from

$14.79

We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:

Meets and/or exceeds OEM standard
Direct-fit replacement for ease of installation
100% leak tested

from

$17.99

This HVAC relay connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this HVAC relay connector matches the appearance and function of the factory hardware on specified applications.
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$10.90

Water Pump Gasket

from

$69.99

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$46.99

The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:

Indicates coolant temperature
Helps prevent coolant injuries
Fahrenheit and centigrade readings
Color-coded temperature ranges
Integrated coolant reclamation valve
Improves under-hood appearance
Chromed crown with a colored trim ring

from

$81.99

Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

Upgrade your 1996 Dodge Neon with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 1996 Dodge Neon, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Cooling and Climate Controls are key to keeping your Neon functioning at its best. At Advance Auto Parts, we offer a wide selection of 82 Cooling and Climate Controls for the 1996 Dodge Neon, designed to meet your needs without breaking the bank. From Engine Cooling Part replacements to Air Conditioning Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 1996 Dodge Neon at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $0.99 to $431.99, with an average price of $61.13. Our 82 Cooling and Climate Controls in stock come from 17 trusted brands, so you’re sure to find the right part for your 1996 Dodge Neon without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1996 Dodge Neon, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Permatex, Carquest Premium, Imperial, and more. Permatex Cooling and Climate Controls start at just $6.99 and boast an impressive 5 stars average rating from customers. Carquest Premium and Imperial also bring quality to the table, with Cooling and Climate Controls available starting at $4.29, and at an average 4 stars rating. With 4,899 customer reviews and counting, our 1996 Dodge Neon Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1996 Dodge Neon is always ready to roll. We’re committed to providing you with everything you need to keep your Neon in top shape, all in one place. Start shopping confidently below for your 1996 Dodge Neon!

Best-Selling Engine Cooling Parts for 1996 Dodge Neons

Enhance the driving experience in your Dodge with 43 quality Engine Cooling Part components, starting at $2.29.

show more show less

from

$22.99

Adjustable Thermostatic Fan Control; Economy Model; 32-248°F. Controls the operating temperature of Imperial electric fans

Product Features:

Economy adjustable thermostatic fan control
Economy Model; 32-248°F
For use with Imperial electric fans
Probe installs into radiator fins

from

$26.99

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$34.99

Driveworks Remanufactured Water Pumps offer a complete replacement part solution, with application coverage spanning from antique to present-day vehicles. All units are 100% tested and engineered to meet or exceed O.E.M. performance, providing you a quality product you and your vehicle can rely on.

Product Features:

100% leak tested and hub-pull tested to promote a long, trouble-free performance life
Designed and manufactured with new, high-quality unitized seals from OE suppliers to ensure long, trouble-free performance
Each unit uses the proper bearing design as specified by the OE manufacturer to meet the specific radial torque and axial load requirements of each application to promote long bearing life and trouble-free performance
Supplied with high-quality mounting gasket and other seals/gaskets as applicable per application to help complete the job
Manufactured to original casting specifications to ensure a proper fit and proper water flow for efficient cooling

from

$6.99

Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$9.79

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$13.49

Safety lever to vent coolant pressure before removal
Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$12.49

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$7.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$7.29

This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part.
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

from

$11.99

The Superstat has the added features of a heavier frame, spring and heat motor for more control and longer life. Its unique, patented valve promotes extremely fast flow as the thermostat opens to reduce cycling.

Product Features:

Direct fit

from

$156.99

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$94.99

Electric fan with 12″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:

Rapid-Cool® Thin-Line electric fans
12″ Diameter
800 CFM
Use as a pusher or puller fan

from

$55.99

Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160-210°F push-in probe
For use with Imperial electric fans
Probe installs into radiator fins

from

$67.99

Electric fan with 10″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:

Rapid-Cool® Thin-Line electric fans
10″ Diameter
650 CFM
Use as a pusher or puller fan

from

$38.49

Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Preset thermostatic fan control
185°F preset
For use with Imperial electric fans
Probe installs into radiator fins

from

$2.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$20.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Meets and/or exceeds OEM standard
Direct-fit replacement for ease of installation
100% virgin resin material to insure durability
100% leak tested

from

$62.99

Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160°F – 210°F thread-in probe
For use with Imperial electric fans
Thread-in probe for installation in water jacket or radiator

from

$20.79

Heavy gauge stainless steel components offer increased reliability and long-lasting durability
Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
AccuSpring Design for stable temperature control and increased cabin comfort

from

$9.99

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$2.99

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part.
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

from

$33.49

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$33.49

Direct replacement – this engine water pump inlet tube is designed to match the fit and function of the original tube on specified applications.
Restores functionality – reliable replacement for an original part that has failed due to corrosion from heat and water cycling.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$3.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$96.99

New Platinum Pro Radiator, 2.0 Liter Engine, With A/C, With Top Middle Fan Mounts Spaced 7 Inches Apart

Product Features:

2.0 Liter Engine, With A/C, With Top Middle Fan Mounts Spaced 7 Inches Apart, Made Of Plastic and Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$21.99

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$19.02

Thermostat

from

$10.29

This engine coolant filler neck is designed to match the fit and function of the original neck on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this engine coolant filler neck is designed to match the fit and function of the original neck on specified applications.
Restores functionality – reliable replacement for an original part that has cracked or failed due to heat, vibration or fatigue.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$204.99

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
Oil cooler designs meet or exceed OE standards, keeping the vehicle┐s engine and transmission performing at optimal conditions
OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
Our included “multi-fit” attachments allow one radiator to cover multiple vehicle applications without sacrificing OE fit. This results in wider vehicle coverage with substantially less inventory.

from

$142.99

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$112.99

Trimline Straight Blade Electric Fan

from

$103.99

Trimline S-Blade Electric Fan

from

$99.99

Trimline Straight Blade Electric Fan

from

$95.99

This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:

Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
Complete package – assembly is designed with the same materials and components as the original part.
Quality assured – motors are tested in laboratory settings to ensure performance
Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership

from

$94.99

All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$59.63

The GMB Water Pump contains no remanufactured components and is designed to combat engine overheating associated with higher RPM, performance and high load applications. All GMB Water Pumps feature a precision ground, heavy duty steel bearing that`s completely sealed and lubricated for life. A specially modified, high performance impeller eliminates cavitation at high RPM`s, maintaining maximum volumetric flow of coolant, thus reducing engine temperature and increasing horsepower.

Product Features:

OE-Equivalent and direct fit application.
100% new with no remanufactured parts.
High flow design
Factory lubricated bearing assembly
Precision ground shaft and hub
OE quality forged housing for maximum coolant flow
Precision built and balanced
Pressed on impeller for increased water flow
Unique no sealed required gasket
Unitized seal protects bearings and provides long life leak free performance.
Factory sealed precision ground one piece bearing assembly

from

$38.99

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$22.49

Kit includes thermostat, housing, and all necessary seals/gaskets to do the complete job. These individual parts are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat and housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$20.88

Radiator Cap

from

$14.79

Meets and/or exceeds OEM standard
Direct-fit replacement for ease of installation
100% leak tested

from

$12.81

Radiator Cap

from

$10.49

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$10.03

Thermostat

Most Popular 1996 Dodge Neon Air Conditioning Parts

Customize your Dodge with 34 Air Conditioning Parts products like AC Compressor Without Clutch, AC Compressor With Clutch, and Expansion Valve and Orifice Tubes, all priced under $431.99.

show more show less

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function & versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost
Pack of 3

from

$9.49

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications

from

$257.99

CARQUEST New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. CARQUEST New Compressors are designed to pump the air conditioning refrigerant through the air conditioning system to provide exceptional climate control for the passenger compartment.

Product Features:

New, with Clutch, with 10PA17C Compressor
Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.

from

$149.99

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$23.29

Product Features:

Premium components and our own manufactured circuit board ensure precise operation, reliability, and extra durability for a longer service life
Our electronic voltage regulator PC boards are encapsulated in epoxy to deliver improved performance and resistance to failure that may be caused by vibration and corrosion of electrical connections
All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.

from

$22.99

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$246.99

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.

from

$214.99

Carquest Standard compressors offer reliable, long-lasting performance for a leak-free, dependable repair.

Product Features:

Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
All units have new seals, O-rings, gaskets and clutch bearings
Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life

from

$17.79

Compatible with both R12 And R134a refrigerants; All the seals needed to complete the job; SUV And rear air applications; Application specific

from

$18.79

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

High-quality products that meet OE appearance and performance to

from

$19.99

from

$17.99

Direct replacement – this HVAC relay connector matches the appearance and function of the factory hardware on specified applications.
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$28.49

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$32.49

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$1.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$76.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Improved 2 terminal design replacing older 1 terminal switch

from

$1.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$0.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$44.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$14.29

OE style connectors; Molded plastic construction; Quality contacts ensure proper conductivity; Universal applications

from

$346.99

New Standard Replacement A/C Compressor, Denso, 1 Groove Pulley

Product Features:

Denso, 1 Groove Pulley
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$21.29

from

$4.29

from

$431.99

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.
O-Rings and gaskets necessary for installation are included.

from

$117.99

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$113.47

A/C Evaporator

from

$106.99

New Platinum Pro A/C Condenser, With Brackets

Product Features:

With Brackets, Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$103.99

This A/C condenser fan assembly is precision-engineered to match the fit and performance of the stock condenser fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it functions as effectively as the original part.

Product Features:

Ideal replacement – this air conditioner condenser fan assembly is engineered to match the fit and performance of the stock condenser fan on specific vehicles.
Complete package – assembly is designed with the same materials and components as the original part.
Quality assured – components are tested in laboratory settings to ensure performance
Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership

from

$95.99

A/C CLUTCH NEW

from

$64.99

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$53.99

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$42.49

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$30.99

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$14.29

Direct replacement – this HVAC switch connector matches the appearance and function of the factory hardware on specified applications.
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Top Picks for 1996 Dodge Neon Heating Parts

Upgrade Dodge Neons with top-quality Heating Parts parts, including 1 OEM and aftermarket selections for your 1996 model.

show more show less

from

$81.99

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

In-Demand Blower Motor and Related Products for 1996 Dodge Neons

Select from 4 premium Blower Motor and Related Products parts for your 1996 Dodge Neon, with prices ranging from $18.99 to $58.99.

show more show less

from

$23.29

High quality OE replacement part with all components needed to complete the job

Product Features:

Precision engineered
OE style molded connectors
Quality contacts ensure proper conductivity
Vehicle specific applications

from

$58.99

Our control modules feature double wire bonds for better connections, greater dependability and longer life despite being subjected to intense vibration and the tough operating environment
Copper slug heat sinks provide better heat dissipation to prevent heat from damaging the module
Our ignition modules will respond to a weak signal from the crankshaft position sensor and begin energizing the coils immediately for better starts in cold weather
High-temperature polymer housing reducing moisture intrusion and minimizes vibration damage for extended life and improved reliability
Our ignition modules are durability tested for 500 thermal cycles ranging from -40C to +125C

from

$29.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$18.99

Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:

Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

Top-Rated Cooling and Climate Controls Brands For Your 1996 Dodge Neon

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 1996 Dodge Neons. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex, Carquest Premium, and Imperial, and more. Cooling and Climate Controls from these brands that fit a 1996 Neon start at just $4.29 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 1996 Dodge Neon Cooling and Climate Controls

When it comes to maintaining or upgrading your 1996 Dodge Neon, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 1996 Dodge Neon. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$26.99

(7)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

“it worked great,thank you marv and your crew.”

from
$6.99

(288)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

“Goood product”

from
$38.99

This product is not rated

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

“”

Popular Carquest Premium 1996 Dodge Neon Cooling and Climate Controls

Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 1996 Dodge Neon owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 1996 Neon, Advance Auto Parts carries a full inventory of 33 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your Dodge in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range from $4.29 to $431.99, plus, with more than 268 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from
$9.99

This product is not rated

Radiator Cap: 16 PSI

“”

from
$19.99

This product is not rated

Multi Purpose Relay

“”

from
$28.49

This product is not rated

Brake Pressure Modulator Sensor Connector

“”

FAQs for 1996 Dodge Neon Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 1996 Dodge Neons?

Out of 82 Cooling and Climate Controls that fit 1996 Dodge Neons, the following parts are the top sellers:

Radiator Cap: 16 PSI (17110018) – $9.79
Radiator Cap: 16 PSI (17110037) – $13.49
Chrysler, Ford, GM Panel Retainer, Pack of 3 (11911131) – $4.49

What’s the price range for 1996 Dodge Neon Cooling and Climate Controls?

Cooling and Climate Control prices for the 1996 Dodge Neon start at $0.99 and go up to $431.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 1996 Dodge Neon?

The average price for Cooling and Climate Controls for the 1996 Dodge Neon is $61.13. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Dodge Neon model years?

Yes, we currently carry Cooling and Climate Controls for 10 model years of Dodge Neons between 1995 and 2005. Cooling and Climate Controls are bought most frequently for the following model years: 2005, 2004, 2003, 2002, 2001, 2000, 1999, 1998, and 1997.

What are the cheapest Cooling and Climate Controls for my 1996 Dodge Neon?

The cheapest 1996 Dodge Neon Cooling and Climate Controls we carry in stock are:

Green Round O-Ring (18890254) – $0.99
Green Round O-Ring (18890169) – $1.99
Green Round O-Ring (18890841) – $1.99
Engine Water Pump Gasket (15780077) – $2.29
Plastic Drain Cock Screw-In Type Screw-M14-2.0 (22972337) – $2.99

What are the top-rated Cooling and Climate Controls that fit the 1996 Dodge Neon?

Out of 4,899 reviews by customers, our 1996 Dodge Neon Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 1996 Dodge Neon and their top-rated products:

Blower Motor and Related Products
- Standard Relay (18890997) – $23.29
Air Conditioning Parts
- Standard Relay (18890997) – $23.29
Engine Cooling Parts
- Standard Relay (18890997) – $23.29

What types of Cooling and Climate Controls do you sell for my 1996 Dodge Neon?

As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 1996 Dodge Neon:

Can I get help with 1996 Dodge Neon Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Cooling and Climate Controls and more.

What is your return policy for Dodge Neon Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Dodge Neon Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1996 Dodge Neon Cooling and Climate Controls

Factory Air – Harness Connector (Part No.37211)

KAI – A/C Condenser (Part No.CND40197)

Metrix – Radiator (Part No.G1000436851MTX)

Carquest Premium – Multi Purpose Relay (Part No.RAA1234)

Factory Air – Green Round O-Ring (Part No.24608)

Dorman – Water Inlet Pipe (Part No.626-529)

Carquest Premium – Air Charge Temperature Sensor Connector (Part No.PTA1262)

Carquest Premium – Radiator Cap: 16 PSI (Part No.10330)

Carquest Premium – A/C Discharge Line Hose Assembly (Part No.T56276)

Factory Air – Green Round O-Ring (Part No.24650)

Driveworks – Coolant Temperature Sensor (Part No.31252)

Motorad UltraStats – Thermostat: With Seal, 195 Degrees (Part No.5340-195)

Carquest – Vapor Canister Purge Solenoid Connector (Part No.PT2004)

Felpro – THERMOSTAT GASKET (Part No.35588)

Factory Air – Compressor Mounted High Cut-Out Pressure Switch (Part No.20050)

Factory Air – Cap and Valve A/C System Seal Kit (Part No.26782)

KAI – A/C Receiver Drier (Part No.ARD010149)

Carquest Premium – A/C New; w/ Clutch; w/ 10S17C Compressor (Part No.T78378)

Dorman – Help – Engine Coolant Reservoir Cap: Flip Top, Polypropylene, 1 Pack (Part No.54201)

Dorman – 2-Wire Pressure (Part No.85141)

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

Carquest Premium – A/C Plate and Fin Evaporator (Part No.T54572)

Carquest Premium – Coolant Housing/Water Outlet (Part No.85081)

Dorman – 5-Wire Style Relay (Part No.85170)

Mahle – Water Pump Gasket (Part No.G3040214571MAH)

Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T39101)

Mr. Gasket – Thermocap Radiator Cap (Part No.2471B)

Carquest Premium – Heater Core (Part No.394210)

Imperial – Adjustable Thermostatic Fan Control (Part No.226203)

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

Driveworks Water Pumps – Water Pump (Part No.58-522)

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Carquest Premium – Radiator Cap: 16 PSI (Part No.10230)

Carquest Premium – Radiator Cap: 16 PSI (Part No.10330)

Carquest Premium – Standard Thermostat: With Seal, 195 Degrees (Part No.14209)

Felpro – THERMOSTAT GASKET (Part No.35588)

Dorman – Help – Radiator Drain Cocks (Part No.61125)

Carquest Premium Stats – Thermostat (Part No.45209)

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.432362)

Imperial – Electric Fan – 12" Diameter (Part No.226112)

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Imperial – Electric Fan – 10" Diameter (Part No.226110)

Imperial – Thermostatic Fan Control – Preset (Part No.226206)

Felpro – Engine Water Pump Gasket (Part No.35586)

Carquest Premium – Engine Coolant Filler Neck (Part No.85175)

Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)

Motorad UltraStats – Thermostat: With Seal, 195 Degrees (Part No.5340-195)

Carquest Premium – Radiator Cap: 16 PSI (Part No.10226)

Dorman – Plastic Drain Cock Screw-In Type Screw-M14-2.0 (Part No.490-216.1)

Carquest Premium – Air Charge Temperature Sensor Connector (Part No.PTA1092)

Dorman – Water Inlet Pipe (Part No.626-529)

Felpro – Engine Water Pump Gasket (Part No.35131)

KAI – Radiator (Part No.RAD1548)

Carquest Premium – Coolant Temperature Sensor with Thread Sealant (Part No.WTC1176)

Gates – Thermostat (Part No.G4000948454GAT)

Dorman – Engine Coolant Filler Neck (Part No.902-770)

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.811623)

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.432602)

Flex A Lite – Trimline Straight Blade Electric Fan (Part No.112)

Flex A Lite – Trimline S-Blade Electric Fan (Part No.390)

Flex A Lite – Trimline Straight Blade Electric Fan (Part No.108)

Dorman – Radiator Fan Assembly: Single, Cost Effective And Reliable (Part No.620-007)

Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)

GMB – Water Pump (Part No.G30001096206GMB)

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

Motorad – Thermostat Kit: Includes Housing, Thermostat and Seal, 195 Degrees (Part No.5175KT)

Gates – Radiator Cap (Part No.G10101065016GAT)

Carquest Premium – Coolant Housing/Water Outlet (Part No.85081)

Autopart International Inc – Radiator Cap (Part No.G10101921048API)

Carquest Premium – Standard Thermostat: With Seal, 180 Degrees (Part No.340-180)

Autopart International Inc – Thermostat (Part No.G40002025089API)

Dorman – Chrysler, Ford, GM Panel Retainer, Pack of 3 (Part No.963-058D)

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26713)

Carquest Premium – New Compressor (Part No.T78357)

Carquest Premium – A/C Condenser (Part No.3142)

Carquest – A/C and Heater Relay (Part No.R3177)

Carquest Premium – A/C Block Type Flange Expansion Valve (Part No.T38849)

Carquest Premium – A/C New, with Clutch, with 10PA17C Compressor (Part No.T58344)

Carquest Standard – Reman Nippondenso 10PA17C Compressor w/ Clutch (Part No.DW57344)