1996 Chevrolet K2500 Engine Cooling Parts

Essential 1996 Chevrolet K2500 Engine Cooling Parts

Dorman – Coolant Reservoir – Expansion Tank (Part No.G1030308683DOR)

Coolant Reservoir - Expansion Tank

from

$40.78
Dorman’s Engine Coolant Recovery Tank is designed for enduring use. It resists the expansion and cracking that extreme temperature fluctuations can cause. Plus, the durable plastic construction prevents coolant fluid loss.

Product Features:
  • Comes with reservoir cap
  • Level sensor included (where applicable)
  • Direct replacement for a proper fit every time
  • Quality tested to ensure trouble-free installation and performance
See More

Mahle – Engine Coolant Thermostat O-Ring (Part No.G4030204690MAH)

Engine Coolant Thermostat O-Ring

from

$4.09
The Mahle Engine Coolant Thermostat O-Ring is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Seals the thermostat housing and helps prevent coolant from leaking from the engine for proper engine temperature
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

ACDelco – GM Original Equipment Engine Coolant Temperature Sensor (Part No.C6020210271ACD)

GM Original Equipment Engine Coolant Temperature Sensor

from

$66.21
The ACDelco GM Original Equipment Engine Coolant Temperature Sensor monitors the engine temperature, and is a GM-recommended replacement for your vehicle’s original component. The engine temperature signal is used by the engine control module to adjust the air/fuel mixture and ignition timing. This original equipment engine coolant temperature sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Undergo the same stringent testing process as the original part
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Felpro – Engine Water Pump Gasket (Part No.13032)

Engine Water Pump Gasket

from

$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

GM Genuine Parts – Engine Cooling Fan Blade (Part No.15-80739)

Engine Cooling Fan Blade

from

$66.99
GM Genuine Parts Engine Cooling Fan Blades are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Carquest Premium – Radiator Cap: 16 PSI (Part No.10331)

Radiator Cap: 16 PSI

from

$16.79
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Safety lever to vent coolant pressure before removal
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Dorman – Coolant Air Bleeder Screw (Part No.902-112)

Coolant Air Bleeder Screw

from

$16.99
This engine coolant bleeder screw has been manufactured from durable material to prevent cooling system leaks. Matches the original screw for fit and function.

Product Features:
  • Ideal replacement – this engine coolant bleeder screw matches fit and function of the original equipment screw.
  • Durable materials – designed to withstand high cooling system temperatures and pressures.
  • Cost-effective solution – this bleeder screw offers original equipment quality at a competitive price
  • Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
See More

Carquest Premium – Engine Cooling Fan Switch Connector (Part No.PTA1441)

Engine Cooling Fan Switch Connector

from

$22.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Felpro – WATER PUMP MOUNTING GASKET SET (Part No.ES 73030)

WATER PUMP MOUNTING GASKET SET

from

$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Felpro – THERMOSTAT GASKET (Part No.35614)

THERMOSTAT GASKET

from

$5.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Motorad – Thermostat Kit: Includes Housing, Thermostat and Seal, 195 Degrees (Part No.5169KT)

Thermostat Kit: Includes Housing, Thermostat and Seal, 195 Degrees

from

$20.99
Kit includes thermostat, housing, and all necessary seals/gaskets to do the complete job. These individual parts are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat and housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Felpro – Engine Water Pump Installation Kit (Part No.ES 72674)

Engine Water Pump Installation Kit

from

$8.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Dorman – Water Pump Mounting Hardware Kit (Part No.902-804)

Water Pump Mounting Hardware Kit

from

$14.99
This engine water pump stud kit is designed to match the original hardware required to repair the water pump on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this engine water pump stud kit is designed to match the original hardware required to repair the water pump on specified vehicles.
  • Ideal solution – this kit is a reliable replacement for original hardware that is missing or damaged.
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

ACDelco – Engine Coolant Temperature Sensor (Part No.213-77)

Engine Coolant Temperature Sensor

from

$37.99
ACDelco GM Original Equipment Engine Coolant Temperature Sensors monitor engine temperature, and are GM-recommended replacements for your vehicle’s original components. The engine temperature signal is used by the engine control module to adjust the air/fuel mixture and ignition timing. These original equipment engine coolant temperature sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Helps keep engine running at proper temperature
  • Alerts vehicle operator of high engine temperature conditions
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Coolant Housing/Water Outlet: Gasket Included (Part No.85244)

Coolant Housing/Water Outlet: Gasket Included

from

$38.99
We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:
  • Meets and/or exceeds OEM standard
  • Includes quality gasket or O-ring to ensure proper seal (where applicable)
  • Coated with corrosion and rust inhibitor
  • 100% leak tested
  • Direct-fit replacement for ease of installation
See More

Carquest Premium – Daytime Running Light Relay (Part No.RLC1001)

Daytime Running Light Relay

from

$59.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Coolant Housing/Water Outlet: With Housing and Gasket, 90 Degree Neck Angle (Part No.902-2031)

Coolant Housing/Water Outlet: With Housing and Gasket, 90 Degree Neck Angle

from

$16.49
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
See More

Carquest Premium – Radiator: With Engine Oil Cooler (Part No.812315)

Radiator: With Engine Oil Cooler

from

$246.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
See More

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

GM Genuine Parts – Engine Cooling Fan Clutch (Part No.15-40111)

Engine Cooling Fan Clutch

from

$174.99
GM Genuine Parts Engine Cooling Fan Clutches are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These engine cooling fan clutches control the speed of the radiator fan based on the temperature of the air after it passes through the radiator fins. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps quiet noisy cooling fans with stuck fan clutches
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Mr. Gasket – Water Outlet Gasket (Part No.740C)

Water Outlet Gasket

from

$8.49
This is a high quality gasket that will seal that leaking water neck, and provide you with years of service. This gasket works well in all applications.

Product Features:
  • Made From Cellulose/Nitrile Composition
  • Provides Excellent Sealing And Durability
  • These Gaskets Are Die Cut For a Precision Fit
  • Fits Small Block Chevy V8 Engines 1955-’90
  • Fits Big Block Chevy V8 Engines 1965-’90
  • Fits Small Block Chrysler 318/360 1979-’92
  • Fits Small Block Chrysler 3.9L/5.2L/5.9L Magnum 1992-’03
See More

Dorman – Dorman Expansion Tank Cap (Part No.G1040308133DOR)

Dorman Expansion Tank Cap

from

$10.03
Dorman offers a variety of Engine Coolant Recovery Tank Caps for a range of applications. All Dorman Engine Coolant Recovery Tank Caps are constructed of high-quality plastic. They effectively protect the cooling system by providing a tight seal against the elements.

Product Features:
  • Save time, money and labor by replacing only the Cap – instead of the entire Engine Coolant Recovery Tank
  • Direct replacement for a proper fit every time
  • A necessary safety item – prevents coolant from splashing and/or leaking
  • Available in diverse styles, including screw-on and snap-on
See More

Victor Reinz – Engine Water Pump Gasket (Part No.71-14095-00)

Engine Water Pump Gasket

from

$4.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

KAI – Cooling Fan Shroud (Part No.GM3110144)

Cooling Fan Shroud

from

$20.99
New Platinum Pro Lower Fan Shroud

Product Features:
  • 34 Inch Core
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Radiator Cap: 16 PSI (Part No.10230)

Radiator Cap: 16 PSI

from

$9.79
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

US MOTOR WORKS – Water Pump with Fan Clutch (Part No.MCK1044)

Water Pump with Fan Clutch

from

$256.99
US Motor Works Professional Series Water Pump with Fan Clutch are designed to replace the mechanical components of a cooling system. A proper water pump replacement should include a new fan clutch as the two are connected to the same shaft and work together to move the air and cooling fluid. Replacing one without the other can damage the new part and cause repeat work or engine trouble. This matched set will allow your vehicle continued operation in the demanding environment of today’s engine. All components are brand new and QA inspected for perfect fit and function. Restore your cooling power by installing a US Motor Works Professional Series Water Pump with Fan Clutch.

Product Features:
  • Fan clutch mounts to the water pump and should be replaced at the same time.
  • Matched set for proper water pump or fan clutch replacement
  • Includes mounting hardware, gaskets and accessories as required.
  • Complete mechanical cooling parts replacement
  • Factory tested and 100% new product
  • Meets or exceeds OEM quality
See More

Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)

Thermostatic Fan Control - Adjustable

from

$62.99
Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:
  • Adjustable thermostatic fan control
  • 160°F – 210°F thread-in probe
  • For use with Imperial electric fans
  • Thread-in probe for installation in water jacket or radiator
See More

1996 Chevrolet K2500 Engine Cooling Parts

Maybe you’re in the middle of a full rebuild of that 1996 Chevrolet K2500. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 120 different Engine Cooling Parts in our inventory ranging from $1.29 to $787.49. That means you can find the exact parts or products you need to keep that 1996 Chevrolet K2500 running smoothly.

Engine Cooling Parts are only as good as their brand. We stock 23 different brands to make sure you have plenty of trusted parts to choose from for your 1996 Chevrolet K2500. Carquest Premium, Permatex, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Engine Cooling Parts for your 1996 Chevrolet K2500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 5,850 reviews in this category, some of the top rated parts include Radiator: With Engine and Transmission Oil Coolers with 4.2 stars and Engine Cooling Fan Clutch: Reverse Rotation Severe Duty Thermal Clutch with 4.4 stars.

So if you’re in the market for aftermarket Engine Cooling Parts to keep your 1996 Chevrolet K2500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Engine Cooling Parts Brands To Make Your 1996 Chevrolet K2500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1996 Chevrolet K2500 demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your K2500 the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.

FAQs for 1996 Chevrolet K2500 Engine Cooling Parts

What are the most purchased Engine Cooling Parts for the 1996 Chevrolet K2500?

Out of 120 Engine Cooling Parts for the 1996 Chevrolet K2500, the most popular in our inventory are:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Water Pump Housing Gaskets
Engine Water Pump Gasket
from $2.99
(68)
Engine Water Pump Gasket
Water Pump Gaskets
Standard Thermostat: With Seal, 195 Degrees
from $7.29
(105)
Standard Thermostat: With Seal, 195 Degrees
Thermostats

What are the top-rated 1996 Chevrolet K2500 Engine Cooling Parts?

Top-rated Engine Cooling Parts for your 1996 Chevrolet K2500 based on customer reviews/ratings are:
Radiator: With Engine and Transmission Oil Coolers
from $227.99
(137)
Radiator: With Engine and Transmission Oil Coolers
“The radiator was fine.”
Engine Cooling Fan Clutch: Reverse Rotation Severe Duty Thermal Clutch
from $95.99
(129)
Engine Cooling Fan Clutch: Reverse Rotation Severe Duty Thermal Clutch
“Works great. No issues so far”
Radiator: With Engine and Transmission Oil Coolers
from $236.99
(125)
Radiator: With Engine and Transmission Oil Coolers
“Perfect fit, no troubles!”