1996 Chevrolet Impala Valve Cover and Cylinder Heads
More 1996 Chevrolet Impala Valve Cover and Cylinder Heads
Find your specific 1996 Chevrolet Impala original or aftermarket Valve Cover and Cylinder Heads below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1996 Chevrolet Impala Valve Cover and Cylinder Heads
Felpro – Cylinder Head Gasket Set (Part No.HS 8510 PT)
from
$84.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Head sets contain gaskets and seals necessary for a valve grind or head reconditioning job
- Application specific design to ensure a perfect fit and premium seal
- Premium quality parts you can trust
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Contains all the parts needed to complete the repair unless otherwise noted
Felpro – Cylinder Head Gasket Set (Part No.HS 8723 PT-5)
from
$60.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ARP Auto Racing – For Use With 2004 And Later Gen Iii/ Ls Series Small Block, 200000Psi Tensile (Part No.134-3610)
from
$155.99
All Pro Series bolts are cold forged to ensure molecular integrity, heat treated prior to thread rolling and machining, and are rated at 200,000 PSI tensile strength. ARP Pro Series head bolt kits are application specific, designed for use with typically competition only components. These fasteners deliver superior strength and meet the ARP zero defect zero failure quality standard. Hardened and parallel ground washers are included with each kit to ensure even load distribution and accurate torque readings. All Pro Series head bolts have a reduced wrenching hex or 12 point head and wide area flange to eliminate the need for valve train removal for cylinder head retorquing and permits the use of larger diameter valve springs. Most applications have undercut short bolts that can help eliminate head gasket failures through providing more stretch to compensate for the additional compression of gaskets.
Product Features:
See More
Product Features:
- Pro Series Bolts Are Cold Forged To Ensure Molecular Integrity, Heat Treated Prior To Thread Rolling And Machining
- Nominally Rated At 200,000 Psi Tensile Strength
- These Fasteners Deliver Superior Strength And Meet The ARP Zero Defect Zero Failure Quality Standard
- Bolts Have A Reduced Wrenching Hex Or 12 Point Head And Wide Area Flange To Eliminate The Need For Valve Train Removal For Cylinder Head Retorquing And Permits The Use Of Larger Diameter Valve Springs
Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72230)
from
$32.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
Dorman – Lock Nut, Type 8, 7/16-20 In., GM (sold by each) (Part No.693-022)
from
$3.49
This engine rocker arm nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine rocker arm nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Sealed Power – Engine Rocker Arm Nut (Part No.MR-1751)
from
$0.95
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Sealed Power – Engine Rocker Arm Ball (Part No.MR-1783)
from
$0.65
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Sealed Power – Engine Push Rod (Part No.RP-3028)
from
$2.49
Sealed Power« Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.
See More
Sealed Power – Engine Push Rod (Part No.RP-3164)
from
$2.49
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Sealed Power – Engine Push Rod (Part No.RP-3181)
from
$2.49
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- State-of-the-art manufacturing
- Exceptional material quality
- Exacting tolerances
- Heat treated tips
- Stock or mild modified replacement
- Made in USA
Sealed Power – Engine Intake Valve (Part No.V-4344)
from
$14.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
TRW – TRW Intake Valve (Part No.A4060430389TRW)
from
$16.82
TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.
Product Features:
See More
Product Features:
- OE Quality
- Optimized for strength
- Heat and corrosion resistant
- Chromium plated or nitrided
- Stem optimized to resist wear
Sealed Power – Engine Intake Valve (Part No.V-1926)
from
$4.99
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Chrome plated stem
- Hard coating added to surface for strength & aiding in lubrication
- Note – coating added in varying thicknesses depending on application
- Innovative design, using leading edge materials
- Utilizes ISO & QS certified manufacturing
Sealed Power – Engine Rocker Arm Kit (Part No.R-826)
from
$3.49
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Complete rocker arm assembly
- 1 Arm
- 1 Ball
- 1 Nut
- Utilizes ISO & QS certified manufacturing
Sealed Power – Engine Rocker Arm Kit (Part No.R-973)
from
$6.99
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Complete rocker arm assembly
- 1 Arm
- 1 Ball
- 1 Nut
- Utilizes ISO & QS certified manufacturing
Sealed Power – Engine Valve Lifter (Part No.HT-817R)
from
$8.49
Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components
Product Features:
See More
Product Features:
- Retro-fit performance
- High-strength steel retainer (precisely limits plunger travel to perform at high rpm)
- Eliminates frequent lash adjustments
- Significant friction reduction substantially increases horsepower and fuel economy
- Delivers quieter engine operation
- Application-specific design for perfect fit and correct operation
Sealed Power – Engine Valve Lifter (Part No.AT-992)
from
$8.49
Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components
Product Features:
See More
Product Features:
- Retro-fit performance
- High-strength steel retainer (precisely limits plunger travel to perform at high rpm)
- Eliminates frequent lash adjustments
- Significant friction reduction substantially increases horsepower and fuel economy
- Delivers quieter engine operation
- Application-specific design for perfect fit and correct operation
Sealed Power – Engine Valve Lifter (Part No.HT-2148A)
from
$24.79
Sealed Power® Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
- New OEM riveted pin retaining design
Sealed Power – Engine Valve Lifter (Part No.HT-2148)
from
$12.99
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-291)
from
$0.65
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-138)
from
$0.30
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-115)
from
$0.43
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Competition Cams – SUPER VALVE LOCKS, 3/8" 1 ST (Part No.612-16)
from
$553.99
Inside tang-to-taper relationship held tightly for repeatable valve spring installed heights
Product Features:
See More
Product Features:
- For simplicity, any Super Lock fits any COMP Cams 10° retainer – just choose the correct lock for you valve size and application
- Super Locks are recommended in all race applications
ACDelco – GM Original Equipment Cylinder Head Gasket (Part No.A8100424147ACD)
from
$40.50
ACDelco GM Original Equipment Cylinder Head Gasket is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.
Product Features:
See More
Product Features:
- GM-recommended replacement part for your GM vehicle
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26324 PT)
from
$44.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- UNIQUE COMBUSTION SEAL – Exclusive LaserWeld stopper layer technology reduces gasket damage from blow out and helps ensure a stronger combustion seal
- MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.9918 PT)
from
$31.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.9917 PT)
from
$31.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PermaTorque head gaskets meets or exceeds all original equipment specifications
- Requires no retorquing of the head bolts
- Unsurpassed quality you can trust
- Unsurpassed quality you can trust
Felpro – Cylinder Head Gasket: Fiber-Faced Composite, Without Head Bolts (Part No.7619 B)
from
$28.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Validated for fit, form, and function
- Unsurpassed quality you can trust
Popular 1996 Chevrolet Impala Valve Cover and Cylinder Heads Categories
1996 Chevrolet Impala Valve Cover and Cylinder Heads
Maybe you’re in the middle of a full rebuild of that 1996 Chevrolet Impala. Maybe you just need a couple of Valve Cover and Cylinder Heads. Either way, Advance Auto Parts has 13 different Valve Cover and Cylinder Heads in our inventory ranging from $0.43 to $284.99. That means you can find the exact parts or products you need to keep that 1996 Chevrolet Impala running smoothly.
Valve Cover and Cylinder Heads are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 1996 Chevrolet Impala. Sealed Power, Felpro, and Competition Cams are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Valve Cover and Cylinder Heads for your 1996 Chevrolet Impala, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 81 reviews in this category, some of the top rated parts include Cylinder Head Gasket Set with 4.0 stars.
So if you’re in the market for aftermarket Valve Cover and Cylinder Heads to keep your 1996 Chevrolet Impala rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Valve Cover and Cylinder Heads Brands To Make Your 1996 Chevrolet Impala Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1996 Chevrolet Impala demands trusted brand parts and products to keep it running. Many trusted brands of Valve Cover and Cylinder Heads make up Advance Auto Parts’ inventory, and all are ready to help make your Impala the best it can be. Be sure to browse some of our top Valve Cover and Cylinder Heads brands and parts.
Popular Sealed Power Valve Cover and Cylinder Heads
We carry Sealed Power parts in our stock across Engine Valves and Push Rods categories, plus more. For a 1996 Chevrolet Impala, our most popular Sealed Power Valve Cover and Cylinder Heads include:
Top 1996 Chevrolet Impala Valve Cover and Cylinder Heads from Sealed Power
Sealed Power products are another trusted brand when it comes to Valve Cover and Cylinder Heads for your 1996 Chevrolet Impala. Popular Sealed Power parts include:
FAQs for 1996 Chevrolet Impala Valve Cover and Cylinder Heads
What are the most purchased Valve Cover and Cylinder Heads for the 1996 Chevrolet Impala?
Out of 13 Valve Cover and Cylinder Heads for the 1996 Chevrolet Impala, the most popular in our inventory are:
from
$37.49
This product is not rated
Cylinder Head Gasket: Composite, Without Head Bolts
Cylinder Head Gaskets
What are the top-rated 1996 Chevrolet Impala Valve Cover and Cylinder Heads?
Top-rated Valve Cover and Cylinder Heads for your 1996 Chevrolet Impala based on customer reviews/ratings are:
from
$193.99
(1)
Cylinder Head Gasket Set
“Felpro gaskets and seals are always a safe bet if installed properly. Would like to see a intake rubber seal for the SBC manifold rather than the tube”
