from

$241.99

Reads and erases diagnostic trouble codes (dtc’s). Tests horsepower, torque and performance. Internet updateable. Transferable to any applicable vehicle application. Easy to use capacitive touch buttons. Full color LCD.

Product Features:

Reads And Erases Diagnostic Trouble Codes (DTCs)
Tests HP/Torque And Performance
Internet Updateable
Transferable to Any Applicable Vehicle Application
Easy To Use Capacitive Touch Buttons
Full Color LCD

from

$25.99

TIMING COVER SEAL

from

$4430.99

Product Features:

Develop 400 To 450 Plus Horsepower
Low Profile Design For Good Conscious Rodders
Increases Torque For Heavy Cars And Towing Apps.
Great Power Adder For Low Compression Crate Motors
Various Snout Lengths For Different V-Belt Arngm.
Full Time Power Every Time You Hit The Gas
w/No Lag

from

$179.99

All kits consist of matched ACCEL custom fit wire set, ACCEL distributor cap and rotor and get the ACCEL U-Groove spark plugs, free. Kits include 8mm custom fit extreme 9000 wire set with heat reflective coat sparkplug boots rated at 1200 degrees Fahrenheit, and ferro-spiral core. Some in-line 6 cylinder applications use 5000 series wire set where extreme heat is not a problem. ACCEL uses the finest distributor cap and rotors available, precision molded in impact resistance high dielectric strength compounds. Most applications in tan with brass or copper inserts and stainless steel contact springs. Renowned, race-proven U-groove copper core spark plugs are used to maximize burn efficiency for improved performance and reduced emissions. Kits are designated with the suffix HP are available with ACCEL Shorty header spark plugs for added plug clearance on vehicles equipped with headers.

Product Features:

Includes Everything Needed
Resistance High Dielectric Strength Compounds
Race Proven
Improved Performance
Reduced Emissions

from

$89.99

A true performance application component for cars, trucks, hot rods, racing/competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.

Product Features:

Unique Safety Interlock Design
Impervious to Vehicle Oils and Chemicals
Strong Enough Too Handle High Performance

from

$23.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
Not intended for use in emission controlled vehicles.

from

$87.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$18.99

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

from

$30.99

Mr. Gasket has three types of exhaust gaskets–standard, Ultra Seal, and Copperseal. Use the standard for a stock rebuild and the Ultra or Copperseal for extra blowout protection.

Product Features:

Made from high temp acrylic blend exhaust material
Provides excellent sealing and durability
Can be trimmed if necessary for modified port app

from

$111.99

Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:

Assures Longer Lasting Cab to Bed Alignment
Replace to Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

from

$11.99

Adds performance to any shock. Benefit from better durability over O.E.M. rubber bushings. Important to use for competition of any kind. Great for show vehicles – adds that finishing touch. Made of Energy’s Hyper-Flex performance polyurethane.

Product Features:

Made from HYPER-Flex Polyurethane
Gives Shock Maximum Efficiency
Add to the Performance of Every Shock
Gives Instant Response/Control to Suspension

from

$61.99

Manufactured from high-density cork and rubber blend gasket material. Provides excellent sealing and durability. Complete with molded rubber front/rear oil pan seals where applicable. For OE replacement and high performance street.

Product Features:

One-piece design
Eliminates potential leaks
Prevents over tightening
Prevents torque loss

from

$185.99

Excel’s broad line of original equipment automotive and light truck/SUV replacement ring & pinion gears, axles, and installation kits offer Richmond’s high OEM quality at affordable prices. The Excel product line covers the most popular vehicles on the road today.

Product Features:

Richmond Gear’s EXCel drivetrain products offer high-quality OEM replacement drivetrain products for your vehicle.
Richmond Gear’s EXCel line of ring & pinon gearsets provide Richmond quality at affordable prices.
EXCel offers a broad line of ring and pinion gears, installation kits, and axle shafts to match most vehicles that are on the road today.
EXCel drivetrain products are engineered to exceed OEM specifications by manufacturing to precise specifications in world-class factories, using the latest heat treatment technology, with extensive quality controls throughout.
All EXCel drivetrain products are backed by our one year warranty.

from

$123.99

LUND is the first automotive accessory manufacturer to develop and offer comprehensive packages to customize and personalize trucks, SUVs, and vans. An American-based company and the creator of the wrap hood shield category through the invention of the Interceptor hood shield, LUND designs and manufactures the most stylish, high performance, and premium automotive accessories for trucks and SUVs. Product categories include: Interceptor hood protection, nerf bars, running boards, tonneau covers, exterior accessories, storage boxes, cargo management, and bed accessories.

Product Features:

Unique, stylized hood scoops for trucks and cars
Transform stock hood into a simulated performance hood
Can easily be painted to match any factory color

from

$9.99

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$349.99

K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:

GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
IMPROVED ENGINE SOUND: Hear the power under the hood.
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
HIGH QUALITY: Made in America.

from

$385.99

Intake manifold base only. Match with top. For 3500 to 7500 PRM. Use where low-end torque is not a prime factor. Great for engines with slightly modified heads. HEI ignition will not clear manifold. Street machines, street rods, pro-street and marine. For PN(7115). Not for sale or use on pollution controlled motor vehicles.

Product Features:

Base Only-See PN[7110] for Complete or TopPN[7032]
Use Where Low-End Torque is Not a Prime Factor
Great For Engines w/Slightly Modified Heads
HEI Ignition Will Not Clear Manifold
For Street Machines; Street Rods; Pro-Street;
Good Choice for High-Performance Boats Also
Not for 1987 and later Cast Iron Heads

from

$377.99

Product Features:

Incredible Improvement in Control
Maintains Proper Caster and Camber Alignment
Increase in Handling and Control
Greatly Reduce Wheel Hop on Quick Acceleration
Even Braking Control is Improved
Better Suspension Stability

from

$336.99

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

Product Features:

Uses Pro 5R Filter For Maximum Air Flow
Rotomolded Plastic Tube For Maximum Air Flow
13% cfm Flow Gain
Increased Horsepower And Torque

from

$18.99

Rotor for Flame-Thrower cast distributors. Premium rotor with brass contact

Product Features:

PerTronix D660701 Rotor Flame-Thrower Billet Distributor
Rotor for Flame-Thrower cast distributors

from

$14.99

Spectre’s Valve Cover Hold Downs feature high quality steel construction with a triple chrome-plated finish. Manufactured for an optimum fit, this product’s hex heads include a decorative O-ring cap for a customizable appearance to suit your needs. Sold 4 per package, these studs are intended to fit standard height Chevy Center bolt valve covers.

Product Features:

4 bolts included in each package
Allen head includes decorative O-ring cap
Triple chrome-plated finish
Fits standard height Chevy Center bolt valve covers

from

$30.99

This Spectre Alternator Bracket is an upper mount designed to fit 1969 and later Chevrolet Big Block engines with a long water pump. Featuring a triple chrome-plated finish and high quality steel construction, this part is an OEM replacement that mounts on the passenger’s side.

Product Features:

Fits Big Block Chevy engines with a long water pump from 1969 and later
Manufactured from high quality steel
Upper bracket for passenger side mounting
Features a triple chrome-plated finish
Stock replacement part

from

$14.99

Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.

Product Features:

Made of Superior Hyper-Flex+ Material
Helps Prevent Damage to Control Arm

from

$25.99

Product Features:

Service Part
Makes Connections Quick And Easy

from

$34.49

The K&N PreCharger® filter wrap is specially designed to extend the service interval of your K&N Filtercharger filter when used in very dusty conditions. They are made from durable polyester material containing a uniform weave. The PreCharger will stop small dirt particles with minimal restriction to the airflow of the filter.

Product Features:

Cellulose nitrile composition
Silicone beading on both sides
Create a leak proof seal
Double beaded, includes EGR restrictor plate

from

$91.99

Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:

Made of Superior Hyper-Flex+ Material
Adds Dramatic Amount of Performance/Durability
Helps Vehicle Be in Control
Allows the Suspension to Function Properly

from

$410.99

LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:

High Performance
Affordable
Durable 16 Gauge Material
Welds Easier
Lasts Longer
Heat Cured
High Heat Resistant

from

$81.99

Spectre’s high quality crankshaft, alternator and engine pulley sets are designed to help dress up your engine compartment. All of our pulleys are designed to work in OE applications and with the OE style serpentine or v-belt configuration.

Product Features: