1996 Buick Park Avenue Coil and Leaf Springs
More 1996 Buick Park Avenue Coil and Leaf Springs
Find your specific 1996 Buick Park Avenue original or aftermarket Coil and Leaf Springs below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1996 Buick Park Avenue Coil and Leaf Springs
Monroe – Strut-Mate Strut Mount Bearing (Part No.903973)
from
$21.99
Monroe Strut-Mate mounting kits are direct fit replacements designed to complement the ride control characteristics of Monroe struts. In addition, our full line will provide you with late model original equipment coverage. When doing strut replacements, it is important to do the complete job. This means not only replacing the struts but also inspecting and replacing worn strut mounts. Remember, worn strut mounts can adversely affect a vehicle’s safety and handling. Not only are strut mounts a necessary component of the suspension system, they consist of rubber to metal bonded parts that wear out over time as well. Worn bearings may also cause noise, steering binding, vibration and vehicle pull. Strut-Mate mounting kits can include*: Strut Mount, Bearing, Upper Spring Isolator, Lower Spring Isolator, or Upper Spring Seat. (*as applicable by OE design)
Product Features:
See More
Product Features:
- Replacing all your warn strut components ensures a complete repair
- High-Quality premium strut components
- Engineered for superior fit and performance
- Monroe Strut-Mate mounting kits* include: Strut Mount, Bearing, Upper Spring Isolator, Lower Spring Isolator, or Upper Spring Seat.
Dorman – Air Suspension Conversion Kit, Front, Rear (Part No.949-556)
from
$601.99
Ride sagging? Don’t want to pay to repair the original air suspension? Convert to a high-quality conventional suspension with this air spring to coil spring conversion kit. Corrosion-resistant steel springs maintain a smooth ride without the cost.
Product Features:
See More
Product Features:
- Alternative replacement – this air suspension delete kit replaces the original air suspension with a conventional suspension
- Cost-saving solution – ideal for older vehicles on which maintaining the original air suspension isn’t necessary or too costly
- Complete kit – includes all necessary hardware and components needed for conversion
- Thoroughly tested – parts underwent ride handling testing to ensure performance
Dorman – Air Suspension Delete Kit, Front (Part No.949-554)
from
$331.99
Failed air suspension too costly to repair? This partial air-to-coil spring conversion kit replaces failed front air springs with conventional steel springs. Cost-effectively restore a smooth ride by only replacing the parts necessary.
Product Features:
See More
Product Features:
- Alternative replacement – this air suspension delete kit replaces the original front air springs with conventional coil springs
- Cost-saving solution – ideal for older vehicles on which maintaining the original air suspension isn’t necessary or too costly
- Thoroughly tested – parts underwent ride handling testing to ensure performance
- Tech note – includes all necessary hardware and components needed to convert front suspension; full 4-corner kit required to eliminate warning light
Monroe – Air Shock to Load Assist Shock Conversion Kit (Part No.90007C)
from
$258.99
Convert a vehicle’s factory-equipped air suspension to a conventional suspension with a Monroe® Suspension Conversion Kit. Includes premium components – application-tuned shock/strut, coil spring(s) and hardware.
Product Features:
See More
Product Features:
- CONVERT YOUR RIDE — A cost-effective alternative to replacing the OE system, this conversion kit converts a factory air to a conventional suspension
- COMPLETE SOLUTION — Includes full instructions and premium-quality replacement components – application-tuned shock/strut, coil spring(s), brackets, and necessary mounting hardware
- EASY TO INSTALL — Engineered for superior fit and trouble-free bolt-on installation
- KEEPS AIR SUSPENSION LIGHT OFF — A complete solution to keep the air suspension light off
- IMPROVED RIDE AND HANDLING — Provides application specific tuning for added control while heavy gauge calibrated coil spring provides maximum performance without an increase in ride harshness
- INCLUDES MONROE® LOAD-ADJUSTING SHOCK — Assists in maintaining ride height when loaded with additional weight of up to 1,200 lbs (capacity is limited by vehicle suspension, tires, and transmission – see vehicle owner’s manual for details)
Suncore – Quick Strut Kit (Part No.2-55S15300-001)
from
$229.99
Quick Strut Kit
Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.171665)
from
$182.99
Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. Assembled in Paragould, AR, they include all required components in a single unit.
Product Features:
See More
Product Features:
- QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
- RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
- VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
- OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
- MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
- MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
- IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
- RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
- ASSEMBLED IN THE USA This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components
Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.181665)
from
$174.99
Engineered to get more miles from your vehicle, the RoadMatic strut assembly includes all required components in a single unit. It meets OE specifications and reduces installation time, eliminating the need for a spring compressor.
Product Features:
See More
Product Features:
- QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
- GET MORE MILES FROM YOUR RIDE – Engineered and fit and ride tested to meet OE spec
- EASY TO INSTALL – Fully integrated design reduces installation time, eliminating the need for a spring compressor
- CONSISTENT PERFORMANCE – Features nitrogen gas-charge and all-weather fluid for improved ride and handling
- COVERAGE – Available for domestic and import passenger cars, light trucks and SUVs
Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.171822)
from
$188.99
Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. Assembled in Paragould, AR, they include all required components in a single unit.
Product Features:
See More
Product Features:
- QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
- RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
- VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
- OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
- MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
- MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
- IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
- RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
- ASSEMBLED IN THE USA This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components
Carquest Premium – Complete Strut Assembly 18-811029: Includes Strut and Mount (Part No.18-811029)
from
$199.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.
Product Features:
See More
Product Features:
- Pre-assembled with all new strut, bearing plate and dust cover
- Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
- OE quality strut mount, bearing plate and brackets
- Complete strut assembly is extensively tested for functionality and durability
- Built with a micro-smooth, chrome-plated piston rod
Suncore – Complete Strut Assem (Part No.55S11420)
from
$154.99
Complete Strut Assem
Popular 1996 Buick Park Avenue Coil and Leaf Springs Categories
1996 Buick Park Avenue Coil and Leaf Springs
Maybe you’re in the middle of a full rebuild of that 1996 Buick Park Avenue. Maybe you just need a couple of Coil and Leaf Springs. Either way, Advance Auto Parts has 5 different Coil and Leaf Springs in our inventory ranging from $21.99 to $601.99. That means you can find the exact parts or products you need to keep that 1996 Buick Park Avenue running smoothly.
Coil and Leaf Springs are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1996 Buick Park Avenue. Monroe, Carquest Premium, and Suncore are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Coil and Leaf Springs for your 1996 Buick Park Avenue, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Coil and Leaf Springs to keep your 1996 Buick Park Avenue rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Coil and Leaf Springs Brands To Make Your 1996 Buick Park Avenue Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1996 Buick Park Avenue demands trusted brand parts and products to keep it running. Many trusted brands of Coil and Leaf Springs make up Advance Auto Parts’ inventory, and all are ready to help make your Park Avenue the best it can be. Be sure to browse some of our top Coil and Leaf Springs brands and parts.
Popular Monroe Coil and Leaf Springs
We carry Monroe parts in our stock across Suspension Strut and Coil Spring Assemblies categories, plus more. For a 1996 Buick Park Avenue, our most popular Monroe Coil and Leaf Springs include:
from
$188.99
(21)
Complete Strut Assembly: Includes Strut, Coil Spring, and Mount
Suspension Strut and Coil Spring Assemblies
FAQs for 1996 Buick Park Avenue Coil and Leaf Springs
What are the most purchased Coil and Leaf Springs for the 1996 Buick Park Avenue?
Out of 5 Coil and Leaf Springs for the 1996 Buick Park Avenue, the most popular in our inventory are:
from
$199.99
This product is not rated
Complete Strut Assembly 18-811029: Includes Strut and Mount
Suspension Strut and Coil Spring Assemblies
from
$601.99
This product is not rated
Air Suspension Conversion Kit, Front, Rear
Air-Coil Spring Conversion Kits
