1996 Acura TL Exhaust Parts
More 1996 Acura TL Exhaust Parts Categories
If you’re looking for an original Exhaust Parts replacement for a 1996 Acura TL, you can search through our selection below. You’ll also find aftermarket and OEM Exhaust Parts to meet your needs.
Essential 1996 Acura TL Exhaust Parts
Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.53648)
from
$115.99
Combining the only broad-market stainless-steel construction with a direct fit OE-style replacement, Walker® Quiet-Flow® SS muffler assemblies deliver longer life than typical aluminized mufflers and are available for domestic and foreign vehicles.
Product Features:
See More
Product Features:
- CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Autopart International Inc – Exhaust Pipe (Part No.H60001986543API)
from
$348.37
Exhaust Pipe
Walker – 3 Bolt Exhaust Pipe Flange Gasket: Metal with Fiber, Heat Resistant, Premium Materials (Part No.31645)
from
$4.49
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
BRExhaust – Exhaust Flange Gasket (Part No.256-269)
from
$4.79
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.
Product Features:
See More
Product Features:
- Designed to facilitate hassle-free exhaust repair
- Precise fitment
- Manufactured from quality materials to ensure maximum durability
- Designed for a leak free connection
- OE structure and design
- Built to OEM specifications
- Secure gas-tight connection
BRExhaust – Exhaust Bolt, Nut, and Spring Kit (Part No.254-999)
from
$13.79
BRExhaust offers exhaust flange bolts and kits to secure their premium line of exhaust replacement components. Each component delivers the strength of steel, a proper fit and an easier install or repair. BRExhaust has individual bolts, as well as bolts with springs and nuts to get your project completed. Choose the individual part or kit designed to fit on your vehicle application. The exact fit, easy installation and enduring functionality of BRExhaust¿s OE replacement spring and bolt kits instantly equip your ride with optimally restored emissions control.
Product Features:
See More
Product Features:
- Designed to facilitate hassle-free exhaust repair
- Precise fitment
- Manufactured from quality materials to ensure maximum durability
- Quality construction materials to ensure safe and secure exhaust system performance and a long service life
- Manufactured according to strict OE standards
- Sturdy design featuring premium-grade materials
- Compatible with multiple domestic and import vehicles
Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03415B)
from
$29.49
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
BRExhaust – Exhaust Nut (Part No.258-038)
from
$4.99
The exact fit, easy installation and enduring functionality of BRExhaust’s OE replacement exhaust nuts instantly equip your ride with optimally restored emissions control. Each OE replacement nut is manufactured using quality materials to ensure maximum durability and is designed to enable hassle-free exhaust repair.
See More
Walker – Exhaust 35460 Exhaust System Hanger Insulator (Part No.35460)
from
$6.79
Complete your exhaust repair with Walker® insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.
Product Features:
See More
Product Features:
- OE DESIGN — Designed with OE-style features for easy installation and fit
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust 35119 Exhaust System Hanger Insulator (Part No.35119)
from
$9.49
Complete your exhaust repair with Walker® insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.
Product Features:
See More
Product Features:
- OE DESIGN — Designed with OE-style features for easy installation and fit
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
BRExhaust – Direct-Fit Premium Resonator Assembly – 813-757 (Part No.813-757)
from
$104.99
BRExhaust Direct-Fit Exhaust Resonator and Pipe AssemblyBRExhaust direct-fit exhaust resonator and pipe assemblies are designed to install easily and help you retain the OE exhaust sound you are looking for. Increase horsepower and torque with this corrosion resistant direct-fit component. Aluminized steel construction ensures maximum durability.
Product Features:
See More
Product Features:
- Direct-fit configuration
- Easy Installation
- Engineered to provide excellent exhaust performance
- Made from 16-gauge aluminized tubing
- Increases horsepower and torque
- Corrosion resistant
- Built to OEM specifications
BRExhaust – Direct-Fit Premium Muffler Assembly – 278-915 (Part No.278-915)
from
$152.99
BRExhaust Universal Exhaust MufflerThis BRExhaust replacement exhaust is engineered based on the original OEM design to ensure reliability, durability and performance. The ease of installation will save you time and effort, getting you back out on the road sooner. Each muffler features thicker hangers for added strength and fully welded, perforated tubes to guarantee a long service life.
Product Features:
See More
Product Features:
- Based on the original OEM design for a guaranteed perfect fit_x000d__x000d_
- No welds inside the silencer
- Easy installation
- Aluminized steel construction for maximum durability
- Constructed to reduce flex and withstand vehicle vibration
- External drain hole extends muffler life by allowing moisture to escape
- Uniform flow holes facilitate even distribution of exhaust flow through the muffler’s interior
MagnaFlow – OEM Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.51204)
from
$194.99
MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51204 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.93642)
from
$323.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93642. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2005-2010 Honda Odyssey, 2003-2007 Honda Accord, and more, this direct-fit catalytic converter also interchanges with OE parts 18160-RCA-A00 and 18160-RCA-S00, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
BRExhaust – Direct-Fit Premium Pipe – 780-077 (Part No.780-077)
from
$186.99
BRExhaust Replacement Exhaust PipeBRExhaust exhaust pipes are manufactured to exacting standards and are based on the original OEM design for a guaranteed perfect fit. All BRExhaust pipes are made from aluminized steel. The exact fit, easy installation, durability and enduring functionality of BRExhaust’s OE replacement exhaust pipes instantly equip your ride with optimally restored emission control.
Product Features:
See More
Product Features:
- Manufactured according to strict OE standards
- Sturdy design featuring premium-grade materials
- Precise fitment
- Hassle-free installation and functionality verified by comprehensive testing procedures
- Easy installation
- Direct-fit exhaust system component that saves installation time
BRExhaust – Direct-Fit Premium Front Pipe (Part No.750-047)
from
$235.99
BRExhaust exhaust pipes are designed for easy bolt-on installations. Thicker gauge metal prevents the need for flow-resistant wrinkle bends, thereby enhancing overall exhaust performance. This pipe is engineered to meet OE specs to ensure performance, reliability and a precise factory-like fit. This part features a direct-fit design allowing for easy installation. If you are looking for a replacement exhaust pipe that will fit and perform exactly like the stock one while lasting even longer, BRExhaust is the brand you can rely on.
Product Features:
See More
Product Features:
- Manufactured according to strict OE standards
- Sturdy design featuring premium-grade materials
- Precise fitment
- Hassle-free installation and functionality verified by comprehensive testing procedures
- Easy installation
- Direct-fit exhaust system component that saves installation time
Dorman – Help – Exhaust Stud Kit – M10-1.25 x 40mm (Part No.03105)
from
$10.49
Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- Durable steel construction
- New hardware helps fix exhaust leaks
- Also available in the Exhaust Manifold Hardware Kit
HJS – Exhaust Hanger (Part No.H8050251977HJS)
from
$4.35
Exhaust Hanger
Felpro – Exhaust Manifold Gasket Set (Part No.MS 95682)
from
$27.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Felpro – Exhaust Manifold Gasket Set (Part No.MS 96166)
from
$16.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
BRExhaust – Exhaust Bolt (Part No.258-944)
from
$9.79
If the time has come to replace, install, or fix some components of the exhaust system, BRExhaust will have you covered with all necessary accessories, from bolts to hangers, that will help you complete the exhaust job quickly and easily. Getting mounting parts and other accessories and hardware from the manufacturer that designs exhaust systems for the leading North American carmakers will guarantee factory-like quality and perfect fit. Each and every accessory by BRExhaust is made of quality materials to ensure safe and secure exhaust system performance and long service life.
Product Features:
See More
Product Features:
- Designed to facilitate hassle-free exhaust repair
- Precise fitment
- Manufactured from quality materials to ensure maximum durability
- Proper fit and functionality to finish your install
Ishino Stone – Exh. Man. to Pipe Ga (Part No.H400386511ISH)
from
$7.69
Exh. Man. to Pipe Ga
Bosal – EXHAUST GASKET (Part No.H400040156BSL)
from
$6.93
EXHAUST GASKET
AP Exhaust – Exhaust Pipe Gasket (Part No.H40062392934APE)
from
$5.76
Exhaust Pipe Gasket
Ishino – Exhaust Gasket (Part No.H400035454ISH)
from
$3.13
Exhaust Gasket
Dorman – Help – Heat Shield Bolt Set (Part No.03294CD)
from
$14.29
The catalytic converter heat shield bolt is essential for keeping heat from the exhaust system, away from adjacent car parts and flammable materials positioned under the vehicle. Our direct replacement heat shield bolt secures and holds the catalytic converter heat shield in place.
Product Features:
See More
Product Features:
- Direct replacement ensures a proper fit every time
- For extra protection our Heat Shield Bolts are galvanized for rust-resistance
- Easy to install – No special tools required during installation
- Testing on this part includes salt water corrosion and hardness testing for conformance to product standards and quality
Popular 1996 Acura TL Exhaust Parts Categories
1996 Acura TL Exhaust Parts
You count on your 1996 Acura TL to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 38 Exhaust Parts ranging in price from $4.35 to $966.99, you’re sure to find everything you need for your 1996 Acura TL.
Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 11 different brands like Walker, Dorman, and MagnaFlow. 1996 Acura TL Exhaust Parts start as low as $4.35!
One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 74 extensive product reviews on 1996 Acura TL Exhaust Parts. Some of the top-rated Exhaust Parts products we carry are HM Grade Federal / EPA Compliant Universal Catalytic Converter with 4.0 stars and Exhaust Bolt with 3.0 stars.
Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 1996 Acura TL below to get started!
Top-Rated Exhaust Parts Brands For Your 1996 Acura TL
Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1996 Acura TL running right for years to come. In our inventory you’ll find brands like Walker, Dorman, MagnaFlow, and even more.
Popular Felpro Exhaust Parts
You’ll find popular Felpro brand products across Exhaust Pipes. All are waiting to get your 1996 Acura TL back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated Walker Exhaust Parts
If Walker are what you’re looking for, our inventory holds plenty. We stock Walker brand Exhaust Parts for your 1996 Acura TL, and some of our most reviewed Walker parts include:
from
$184.99
(13)
Catalytic Converter- EPA Ultra, Universal/ Fabrication Needed
Catalytic Converters
from
$6.49
(2)
Donut Exhaust Pipe Flange Gasket: Fiber with Metal, Heat Resistant, Premium Materials
Exhaust Pipe and Flange Gaskets
FAQs for 1996 Acura TL Exhaust Parts
What are the most purchased Exhaust Parts for the 1996 Acura TL?
Out of 38 Exhaust Parts for the 1996 Acura TL, the most popular in our inventory are:
from
$5.49
(1)
Ring Exhaust Pipe Flange Gasket: Fiber with Metal, Heat Resistant, Premium Materials
Exhaust Pipe and Flange Gaskets
from
$178.99
(10)
HM Grade Federal / EPA Compliant Universal Catalytic Converter
Catalytic Converters
What are the top-rated 1996 Acura TL Exhaust Parts?
Top-rated Exhaust Parts for your 1996 Acura TL based on customer reviews/ratings are:
from
$178.99
(5)
HM Grade Federal / EPA Compliant Universal Catalytic Converter
“needs to be cut to fit my application but worked great”
from
$9.79
(2)
Exhaust Bolt
“replaced the muffler on my 93 del Sol, these fit perfectly. They’re a bit more expensive than the cheaper kit, but these look better, and hopefully w”
