1995 Volvo 960 Brake Parts
More 1995 Volvo 960 Brake Parts Categories
If you’re looking for an original Brake Parts replacement for a 1995 Volvo 960, you can search through our selection below. You’ll also find aftermarket and OEM Brake Parts to meet your needs.
Essential 1995 Volvo 960 Brake Parts
Carquest Premium – Multi Purpose Relay (Part No.RAA1734)
from
$22.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)
from
$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.
Product Features:
See More
Product Features:
- Each unit is 100% new, providing consistent performance when servicing your brake system
- Easy to transfer for on-the-spot master cylinder bleeding
- Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
- Easy to clean to ensure no cross contamination
- Durability for long lasting performance
Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.19-B2568)
from
$48.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
- 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- OE Style, stainless steel pad abutment hardware included
- 100% end-of-line inspection and pressure testing ensures quality and performance
- Caliper finish or coating may vary
Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.14009)
from
$4.99
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Easy and fast replacement
- Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
- Corrosion resistant coating for long-lasting durability against harsh roads
- Manufactured with quality materials to suppress high stress levels
- Helps deliver a quieter, more efficient braking system
WBR Coated – Run-True Metallurgic-Gray Coated Brake Disc (Rotor) (Part No.N1000334923WBC)
from
$72.63
WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.
Product Features:
See More
Product Features:
- High metallurgical and machining standard to improve stopping distances
- Produced to match OE design fitment – G 3000 gray iron
- Mill balanced
- TS16949 certified
- Non-directional finish provides smooth vibration free performance
- No need for machining prior to installation
- Durable Metallurgic-Gray finish to all outward non-friction surfaces
- Metallurgic-Gray anti-rust protection to help maintain a clean appearance
- Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
- Designed to minimize brake fade and extend pad and rotor life
- 24/24 Warranty – limited warranty against defects in material and workmanship Technical Service Bulletins
Otto Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N1000402123ZIC)
from
$62.68
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.
Product Features:
See More
Product Features:
- Coat-Z protective anti-corrosion coating
- No formation of rust at the hub and herewith improved visual appearance
- Immediate functional capability without removal of the coating before mounting
- Excellent deceleration action and no distortion of friction ring at high temperatures
- Substantial weight saving and therefore less unsprung mass
- Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
- Hot spots prevented by optimized design of ventilation channels
- 1:1 exchange of original disc possible
- Not subject to registration: general ABE certification supplied with disc
- No conversion required for brake tuning
Wagner – ThermoQuiet Ceramic Disc Brake Pad Set (Part No.PD391)
from
$35.00
Wagner® ThermoQuiet® brake pads feature Wagner OE21 low copper technology, setting new benchmarks for our ceramic brake pad performance.
Product Features:
See More
Product Features:
- QUIETER OPERATION — Application-specific design and a unique laser-shaped friction spreads out heat, sound and vibration to reduce noise opportunities
- LONG LIFE — Superior formulation design dissipates heat for long-lasting friction performance and reduced brake fade
- CLEANER WHEELS — Proprietary formulation provides superior braking performance and reduced rotor wear, helping to cut down on brake dust
- ONE-PIECE DESIGN — IMI technology integrates friction material, backing plate and insulator into the brake pad for select applications
- HARDWARE INCLUDED — Premium stainless-steel hardware included for select applications
- COMPREHENSIVE COVERAGE — Brake pads available for most vehicles on the road
- ZERO/LOW COPPER FORMULATION — Features Wagner OE25 zero-copper and OE21 low-copper friction formulations
Akebono Euro – Ceramic Pads Ultra-Premium (Part No.EUR391)
from
$57.99
Product Features:
See More
- Made in the USA
- OE Manufacturer
- Ceramic Brake Pad
- Low Dust
- Powerful Quiet Stopping
- Ultra-Premium
- Extremely Rotor-Friendly for Longer Rotor Life
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-2676)
from
$166.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
Professional Parts Sweden – Brake Booster (Part No.N400083140PPS)
from
$273.31
Brake Booster
Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N1000457471ZIC)
from
$86.81
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.
Product Features:
See More
Product Features:
- Coat-Z protective anti-corrosion coating
- No formation of rust at the hub and herewith improved visual appearance
- Immediate functional capability without removal of the coating before mounting
- Excellent deceleration action and no distortion of friction ring at high temperatures
- Substantial weight saving and therefore less unsprung mass
- Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
- Hot spots prevented by optimized design of ventilation channels
- 1:1 exchange of original disc possible
- Not subject to registration: general ABE certification supplied with disc
- No conversion required for brake tuning
WBR Coated – Run-True Metallurgic-Gray Coated Brake Disc (Rotor) (Part No.N1000457471WBC)
from
$70.63
WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.
Product Features:
See More
Product Features:
- High metallurgical and machining standard to improve stopping distances
- Produced to match OE design fitment – G 3000 gray iron
- Mill balanced
- TS16949 certified
- Non-directional finish provides smooth vibration free performance
- No need for machining prior to installation
- Durable Metallurgic-Gray finish to all outward non-friction surfaces
- Metallurgic-Gray anti-rust protection to help maintain a clean appearance
- Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
- Designed to minimize brake fade and extend pad and rotor life
- 24/24 Warranty – limited warranty against defects in material and workmanship Technical Service Bulletins
Carquest Premium Gold – Semi-Metallic Brake Pads – (4-Pad Set) (Part No.GMKD634)
from
$38.99
CARQUEST Wearever Gold brake pads are original equipment replacement brake pads that provide consistent, quiet and clean braking. CQ Wearever Gold brake pads are also manufactured by leading brake pad suppliers that OEM and OES heritage. Trust CQ Wearev
Product Features:
See More
Product Features:
- Application-specific formulations designed for extended pad life and clean wheels
- Multi-layer shim for near silent braking
- OE designed slots and chamfers for consistent performance
- Hardware included on popular and late-model applications
Carquest Standard – Semi-Metallic Brake Pads – Front (4-Pad Set) (Part No.MKD634)
from
$23.99
Carquest Standard brake pads are an economical choice for dependable stopping power and quiet braking.
Product Features:
See More
Product Features:
- Dependable stopping power
- Single layer shim for quiet braking
- Single-layer shim absorbs noise and vibration for consistently quiet braking
- Limited Lifetime Warranty
Carquest Wearever – Disc Brake Caliper Guide Pin Boot Kit (Part No.18005A)
from
$15.79
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Easy and fast replacement
- Maintains proper movement for safe, effective stopping performance
- Prevents noise and premature wear
Wagner – Disc Brake Hardware Pin Boot Kit (Part No.H8213)
from
$14.49
This wheel disc hardware kit includes rubber components used to protect the caliper pins or bolts. Worn or cracked rubber components will allow excessive movement of guide pins or bolts.
See More
Bosch – Booster Check Valve (Part No.N4030168919BOS)
from
$9.50
Bosch is one of the largest global suppliers of automotive products, developing, manufacturing and supplying precision OE components and systems to vehicle manufacturers and the automotive aftermarket. 14mm thread
See More
Carquest Wearever – Disc Brake Hardware Kit (Part No.13119)
from
$4.29
Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Exact fitment and original replacement
- New Brake Hardware prevents premature wear and maximizes performance
- Helps deliver a quieter, more efficient braking system
- Manufactured with quality materials to suppress high stress levels
Carquest Wearever – Disc Brake Hardware Kit (Part No.13073)
from
$17.79
Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Exact fitment and original replacement
- New Brake Hardware prevents premature wear and maximizes performance
- Helps deliver a quieter, more efficient braking system
- Manufactured with quality materials to suppress high stress levels
Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA38300)
from
$22.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
- Tensile minimum load holds up to 1800 N
- All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
- Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
- Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
- Brand may vary by location
World Brake Resources – WBR Brake Hose (Part No.N7000156208WBR)
from
$28.55
All WBR hydraulic hoses are manufactured to match the exact OE fit, OE construction, to ensure quick and easy installation, as well as trouble-free functionality for the life of the hose. WBR brake hoses are suitable for all brake fluids (DOT 3, DOT 4, DOT 4 LV, DOT 5.1)
Product Features:
See More
Product Features:
- Excellent pulse strength for use on vehicles with ESP, ABS, DSC and ASR
- Very high ozone resistance, temperature change resistance and so a long service life
- Low water permeation and so extended service life of the brake fluid
- Use of robust hose valve connections and additional safety and shrink-fitted hoses in various materials.
Carquest Wearever – Disc Brake Hardware Kit (Part No.5603A)
from
$6.49
Hardware consists of a variety of parts designed to assist in restoring your brake system to Like New Performance. Caliper anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Exact fitment and original replacement
- Prevents noise and premature wear
- Helps deliver a quieter, more efficient braking system
Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.19-B1622)
from
$58.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
- 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- OE Style, stainless steel pad abutment hardware included
- 100% end-of-line inspection and pressure testing ensures quality and performance
- Caliper finish or coating may vary
Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.19-B1623)
from
$58.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
- 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- OE Style, stainless steel pad abutment hardware included
- 100% end-of-line inspection and pressure testing ensures quality and performance
- Caliper finish or coating may vary
Febi – Exhaust Nut (Part No.H100111133FEB)
from
$2.01
Exhaust Nut
Popular 1995 Volvo 960 Brake Parts Categories
1995 Volvo 960 Brake Parts
You count on your 1995 Volvo 960 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 42 Brake Parts ranging in price from $2.01 to $273.31, you’re sure to find everything you need for your 1995 Volvo 960.
Brands matter. If you want to shop a specific Brake Parts brand, we stock 14 different brands like Carquest, Cardone, and Carquest Premium. 1995 Volvo 960 Brake Parts start as low as $2.01!
One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 64 extensive product reviews on 1995 Volvo 960 Brake Parts. Some of the top-rated Brake Parts products we carry are Semi Loaded Disc Brake Caliper with Bracket with 5.0 stars and Semi Loaded Disc Brake Caliper with Bracket with 4.0 stars.
Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 1995 Volvo 960 below to get started!
Top-Rated Brake Parts Brands For Your 1995 Volvo 960
Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1995 Volvo 960 running right for years to come. In our inventory you’ll find brands like Carquest, Cardone, Carquest Premium, and even more.
Popular Carquest Standard Brake Parts
You’ll find popular Carquest Standard brand products across Brake Pads and Shoes and Brake Kits. All are waiting to get your 1995 Volvo 960 back on the road. Some of the top-rated Carquest Standard products in these categories are:
Top-Rated Carquest Wearever Brake Parts
If Carquest Wearever are what you’re looking for, our inventory holds plenty. We stock Carquest Wearever brand Brake Parts for your 1995 Volvo 960, and some of our most reviewed Carquest Wearever parts include:
FAQs for 1995 Volvo 960 Brake Parts
What are the most purchased Brake Parts for the 1995 Volvo 960?
Out of 42 Brake Parts for the 1995 Volvo 960, the most popular in our inventory are:
What are the top-rated 1995 Volvo 960 Brake Parts?
Top-rated Brake Parts for your 1995 Volvo 960 based on customer reviews/ratings are:
from
$58.99
(1)
Semi Loaded Disc Brake Caliper with Bracket
“This caliper comes with the brackets and slides with is quite nice when your car is a bit on the rusty side.”
from
$35.00
(1)
ThermoQuiet Semi-Metallic Disc Brake Pad Set
“had to ORDER these pads for my 98XC, for some reason no one has them in stock. Not happy at all, lots of pulsating when braking (installed new rotors ”
