1995 Toyota Pickup Drivetrains

Essential 1995 Toyota Pickup Drivetrains

Yukon Gear – Yoke For Toyota V6 Rear With 29 Spline Pinion (Part No.41206)

Yoke For Toyota V6 Rear With 29 Spline Pinion

from

$123.99
Product Features:
  • Fits Toyota V6 rear
  • Conversion yoke for 29 spline gears
  • 29 spline pinion
See More

Rugged Ridge – Locking Hub (Part No.15001.21)

Locking Hub

from

$244.99
Approved as original equipment by vehicle manufacturers and militaries world wide, these tough hubs are built to last. A hardened nylon center is used instead of metal to keep you moving in the rare case of a hub failure. The only way to repair it is to r

Product Features:
  • Impact Resistant Nodular Iron
  • Corrosion Resistant
  • Better 4WD Performance
  • Better Fuel Economy
  • Easy Install
See More

Yukon Gear – Toyota Bearing Retainer For ’01-’02 4Runner, ’01-’04 Tacoma & 00-’06 Tundra (Part No.33421)

Toyota Bearing Retainer For '01-'02 4Runner, '01-'04 Tacoma & 00-'06 Tundra

from

$22.99
Product Features:
  • Bearing retainer
  • Fits 2001-2002 Toyota 4Runner, 2001-2004 Tacoma and 2000-2006 Tundra
See More

Dorman – Driveshaft Center Support Bearing (Part No.934-715)

Driveshaft Center Support Bearing

from

$106.99
This drive shaft center bearing is designed to match the fit and function of the original bearing on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this drive shaft center bearing is designed to match the fit and function of the original bearing on specified vehicles
  • Restores functionality – this bearing is made to fit and fully restore part functionality after the original bearing fails
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Bearing Race Driver (Part No.56004)

Bearing Race Driver

from

$99.99
Bearing race driver for Toyota front V6, Landcruiser reverse rotation, and Tacoma with locker (TOY30025). No return.

Product Features:
  • Bearing race driver
  • Fits 30025 race
  • All steel construction
See More

Driveworks – Tapered Cup Wheel Bearing Assembly (Part No.S-LM-102910)

Tapered Cup Wheel Bearing Assembly

from

$8.49
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

National – Multi Purpose Seal (Part No.224810)

Multi Purpose Seal

from

$12.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Yukon Gear – V6 Side Bearing Adjuster Lock (Without Bolt) (Part No.33364)

V6 Side Bearing Adjuster Lock (Without Bolt)

from

$8.99
Product Features:
  • Side adjuster lock
  • Fits Toyota V6
See More

Driveworks – Oil Seal (Part No.S-1177)

Oil Seal

from

$9.49
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – Outer Oil Slinger (Part No.33025)

Outer Oil Slinger

from

$10.99
Outer oil slinger for Toyota 7.5″, 8″, V6 & Landcruiser.

Product Features:
  • Outer oil slinger for Toyota 7.5″, 8″, V6 and Landcruiser
See More

Koyo – Differential Bearing (Part No.J7060163891KOY)

Differential Bearing

from

$129.78
Differential Bearing

Motive Gear – Differential Pinion Nut (Part No.1504)

Differential Pinion Nut

from

$6.99


Product Features:
  • PIN. NUT TOYOTA FRT&REAR
See More

Dorman – Rear Drive Shaft: OE Fix (Part No.936-764)

Rear Drive Shaft: OE Fix

from

$776.99
The original drive shafts on specific vehicles have permanently staked universal joints that make servicing difficult. This Dorman OE FIX rear drive shaft makes the U-joints serviceable for simpler maintenance. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.

Product Features:
  • Rear Driveshaft Assembly
  • Rear Drive Shaft: OE Fix
  • Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
  • Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance
See More

Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R11RMK)

Differential Master Bearing Kit - Koyo

from

$155.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • TOYOTA 8″ BRNG & SEAL MASTER KIT
See More

Yukon Gear – Toyota 7.5" Crush Sleeve (Part No.33115)

Toyota 7.5" Crush Sleeve

from

$16.99
Toyota 7.5″ crush sleeve, 2.185″ long.

Product Features:
  • Crush sleeve for Toyota 7.5″
  • 2.185″ tall
See More

National – Bearings (Part No.JLM104948)

Bearings

from

$24.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

NOK – Extension Hsng. Seal (Part No.J508135703NOK)

Extension Hsng. Seal

from

$8.02
Extension Hsng. Seal

National – Shaft Repair Sleeve (Part No.99166)

Shaft Repair Sleeve

from

$34.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Yukon Gear – 8" Reverse High-Pinion Toyota Drop Out (Part No.32298)

8" Reverse High-Pinion Toyota Drop Out

from

$529.99
8″ Reverse high-pinion Toyota Drop Out (fits 8″ Housing) .

Product Features:
  • Fits Toyota Landcruiser reverse rotation front
See More

Yukon Gear – 8" Cross Pin Shaft, Standard Open (Part No.33413)

8" Cross Pin Shaft, Standard Open

from

$37.99
Product Features:
  • Cross pin shaft
  • Fits Toyota 8″ with 4 cylinder engine
See More

Yukon Gear – 1177, 7.5", 8", V6 Toyota Redi Sleeve, Saver For Seal Surface (Part No.30220)

1177, 7.5", 8", V6 Toyota Redi Sleeve, Saver For Seal Surface

from

$65.99
1177, 7.5″, 8″, V6 Toyota REDI sleeve, saver for seal surface.Yukon Mighty seal.

Product Features:
  • Pinion Redi-sleeve
  • Fits Toyota 7.5″, 8″ and V6
See More

Yukon Gear – Standard Open Carrier Case, Toyota V6 (Part No.20110)

Standard Open Carrier Case, Toyota V6

from

$794.99
V6 standard Open case, bare.

Product Features:
  • Standard open carrier case
  • Does not include spider gears
  • Fits Toyota V6
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV69073)

CV Axle Shaft Assembly

from

$132.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Yukon Gear – Yoke For Toyota 7.5" IFS (And ’85 And Newer Rear) With 23 Spline Pinion (Part No.41106)

Yoke For Toyota 7.5" IFS (And '85 And Newer Rear) With 23 Spline Pinion

from

$246.99
Yukon yoke for Toyota 7.5″ IFS (and ’85 and newer rear) with 23 spline pinion. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Toyota 7.5″
  • 23 spline
See More

Yukon Gear – 8" Roll Pin, Solid (Part No.33412)

8" Roll Pin, Solid

from

$9.99
Product Features:
  • Roll pin
  • Fits Toyota 8″ with 4 cylinder engine
See More

Yukon Gear – Minor Install Kit For Toyota 7.5" IFS Differential, 4 Cylinder (Part No.12070)

Minor Install Kit For Toyota 7.5" IFS Differential, 4 Cylinder

from

$63.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), pinion shim kit, marking compound and brush. No side shims.

Product Features:
  • Fits Toyota 7.5″ front with 4 cylinder engine
  • Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
See More

Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-988)

Drive Shaft Repair Kit - Only Fits Dorman Driveshafts

from

$51.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Popular 1995 Toyota Pickup Drivetrains Categories

1995 Toyota Pickup Drivetrains

You count on your 1995 Toyota Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 278 Drivetrains ranging in price from $2.29 to $1,356.99, you’re sure to find everything you need for your 1995 Toyota Pickup.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 20 different brands like Valvoline, Moog, and Driveworks. 1995 Toyota Pickup Drivetrains start as low as $2.29!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 3,243 extensive product reviews on 1995 Toyota Pickup Drivetrains. Some of the top-rated Drivetrains products we carry are C.V. Joint Solvent Welded Split Boot Kit Outer with 2.5 stars and Greaseable Super Strength Universal Joint with 4.6 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1995 Toyota Pickup below to get started!

Top-Rated Drivetrains Brands For Your 1995 Toyota Pickup

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1995 Toyota Pickup running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.

Popular Felpro Drivetrains

You’ll find popular Felpro brand products across Differentials. All are waiting to get your 1995 Toyota Pickup back on the road. Some of the top-rated Felpro products in these categories are:
Differential Carrier Gasket
from $8.79
(1)
Differential Carrier Gasket
Automatic Transmission Differential Cover Gaskets

FAQs for 1995 Toyota Pickup Drivetrains

What are the most purchased Drivetrains for the 1995 Toyota Pickup?

Out of 278 Drivetrains for the 1995 Toyota Pickup, the most popular in our inventory are:
Greaseable Premium Universal Joint
from $19.99
(82)
Greaseable Premium Universal Joint
U-Joints
Universal Joint
from $15.99
(33)
Universal Joint
U-Joints
Bearings
from $16.99
(39)
Bearings
Axle Shaft Bearings

What are the top-rated 1995 Toyota Pickup Drivetrains?

Top-rated Drivetrains for your 1995 Toyota Pickup based on customer reviews/ratings are:
C.V. Joint Solvent Welded Split Boot Kit Outer
from $21.99
(88)
C.V. Joint Solvent Welded Split Boot Kit Outer
“This kit was easily installed and solved my problem”
Greaseable Super Strength Universal Joint
from $32.99
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”
Non-Greaseable Super Strength Universal Joint
from $32.99
(28)
Non-Greaseable Super Strength Universal Joint
“installed as needed”