1995 Pontiac Sunfire Engine Cooling Parts

Essential 1995 Pontiac Sunfire Engine Cooling Parts

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Adjustable Thermostatic Fan Control

from

$55.99
Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:
  • Adjustable thermostatic fan control
  • 160-210°F push-in probe
  • For use with Imperial electric fans
  • Probe installs into radiator fins
See More

ACDelco – GM Original Equipment Engine Coolant Thermostat (Part No.G4000202671ACD)

GM Original Equipment Engine Coolant Thermostat

from

$28.42
An ACDelco GM Original Equipment Engine Coolant Thermostat is a temperature controlled valve located in the engine coolant outlet to, or the inlet from, the radiator, and is a GM-recommended replacement for your vehicle’s original component. It controls the flow of coolant through the radiator to enable the engine to reach and maintain its normal operating temperature. This original equipment engine coolant thermostat has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Control the flow of coolant through the radiator to enable the engine to reach and maintain its normal operating temperature
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Felpro – THERMOSTAT GASKET (Part No.35614)

THERMOSTAT GASKET

from

$5.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Victor Reinz – Engine Water Pump Gasket (Part No.71-14095-00)

Engine Water Pump Gasket

from

$4.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Dorman – Coolant Air Bleeder Screw (Part No.902-112)

Coolant Air Bleeder Screw

from

$16.99
This engine coolant bleeder screw has been manufactured from durable material to prevent cooling system leaks. Matches the original screw for fit and function.

Product Features:
  • Ideal replacement – this engine coolant bleeder screw matches fit and function of the original equipment screw.
  • Durable materials – designed to withstand high cooling system temperatures and pressures.
  • Cost-effective solution – this bleeder screw offers original equipment quality at a competitive price
  • Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
See More

ACDelco – Relay (Part No.P2020846897ACD)

Relay

from

$110.00
Relay

Dorman – Electrical Harness – 2-Wire Cooling Fan Motor (Part No.85101)

Electrical Harness - 2-Wire Cooling Fan Motor

from

$17.99
This engine cooling fan motor connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this engine cooling fan motor connector matches the appearance and function of the factory hardware on specified applications.
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Felpro – Engine Water Pump Installation Kit (Part No.ES 72102)

Engine Water Pump Installation Kit

from

$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Carquest Premium – Coolant Housing/Water Outlet: Gasket Included (Part No.85016)

Coolant Housing/Water Outlet: Gasket Included

from

$18.99
We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:
  • Meets and/or exceeds OEM standard
  • Includes quality gasket or O-ring to ensure proper seal (where applicable)
  • 100% virgin resin material to insure durability
  • 100% leak tested
  • Direct-fit replacement for ease of installation
See More

Imperial – Electric Fan – 12" Diameter (Part No.226112)

Electric Fan - 12" Diameter

from

$94.99
Electric fan with 12″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:
  • Rapid-Cool® Thin-Line electric fans
  • 12″ Diameter
  • 800 CFM
  • Use as a pusher or puller fan
See More

KAI – Coolant Reservoir (Part No.GM3014125)

Coolant Reservoir

from

$54.99
New Platinum Pro Coolant Recovery Tank

Product Features:
  • Made Of Polypropylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Coolant Housing/Water Outlet: With Housing, 180 Degree Neck Angle (Part No.902-2047)

Coolant Housing/Water Outlet: With Housing, 180 Degree Neck Angle

from

$15.79
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
See More

ACDelco – 15-8501 GM Original Equipment Engine Cooling Fan Blade (Part No.G5050358804ACD)

15-8501 GM Original Equipment Engine Cooling Fan Blade

from

$111.64
ACDelco GM Original Equipment Engine Cooling Fan Blades are located between the radiator and engine and are GM-recommended replacements for your vehicle’s original components. The fan is a part of the engine cooling system, which moves air across the radiator and A/C condenser to remove heat from the engine cooling system and the AC refrigerant system. The fan may be belt-driven or operated by an electric motor. This cooling fan blade has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Motorad – Thermostat Kit: Includes Housing, Thermostat and Seal, 195 Degrees (Part No.4997KT)

Thermostat Kit: Includes Housing, Thermostat and Seal, 195 Degrees

from

$17.99
Kit includes thermostat, housing, and all necessary seals/gaskets to do the complete job. These individual parts are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat and housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Dorman – Radiator Drain Petcocks (Part No.G1060289694DOR)

Radiator Drain Petcocks

from

$8.95
Dorman offers a variety of Radiator Drain Petcocks for a range of applications. The high-quality design ensures effective draining of the cooling system.

Product Features:
  • Available in several styles, including standard, screw-in, and push-in with captive thread
  • Direct replacement Radiator Drain Petcocks available (where applicable) to ensure a proper fit
  • Durably engineered for a long service life
  • Easy to use, no need to disconnect any of the radiator hoses
See More

Carquest Premium – Radiator Cap Tester Adapter (Part No.12029)

Radiator Cap Tester Adapter

from

$40.99
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

Carquest Premium – Air Charge Temperature Sensor Connector (Part No.PTA1092)

Air Charge Temperature Sensor Connector

from

$33.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

NTK – Engine Coolant Temperature Sensor (Part No.EF0075)

Engine Coolant Temperature Sensor

from

$38.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:
  • OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
  • FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
  • THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
See More

GMB – GMB Water Pump (Part No.G3000265722GMB)

GMB Water Pump

from

$53.57
The GMB Water Pump contains no remanufactured components and is designed to combat engine overheating associated with higher RPM, performance and high load applications. All GMB Water Pumps feature a precision ground, heavy duty steel bearing that`s completely sealed and lubricated for life. A specially modified, high performance impeller eliminates cavitation at high RPM`s, maintaining maximum volumetric flow of coolant, thus reducing engine temperature and increasing horsepower.

Product Features:
  • OE-Equivalent and direct fit application.
  • 100% new with no remanufactured parts.
  • High flow design
  • Factory lubricated bearing assembly
  • Precision ground shaft and hub
  • OE quality forged housing for maximum coolant flow
  • Precision built and balanced
  • Pressed on impeller for increased water flow
  • Unique no sealed required gasket
  • Unitized seal protects bearings and provides long life leak free performance.
  • Factory sealed precision ground one piece bearing assembly
See More

Carquest Premium – Engine Coolant Level Sensor (Part No.SBA3711)

Engine Coolant Level Sensor

from

$10.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.431404)

Radiator: With Transmission Oil Cooler

from

$147.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
See More

Dorman – Radiator Fan Assembly: Single, Cost Effective And Reliable (Part No.620-600)

Radiator Fan Assembly: Single, Cost Effective And Reliable

from

$94.99
This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:
  • Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
  • Complete package – assembly is designed with the same materials and components as the original part.
  • Quality assured – motors are tested in laboratory settings to ensure performance
  • Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
See More

KAI – Rad/Condenser Fan Assembly (Part No.GM3115106)

Rad/Condenser Fan Assembly

from

$81.99
New Platinum Pro Radiator And Condenser Fan Assembly, Single Fan Design, 2.2/2.3/2.4 Liter Engines

Product Features:
  • Single Fan Design, 2.2/2.3/2.4 Liter Engines
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

ACDelco – GM Original Equipment Expansion Tank Cap (Part No.G1040206092ACD)

GM Original Equipment Expansion Tank Cap

from

$26.68
An ACDelco GM Original Equipment Expansion Tank Cap is a spring loaded cap that seals the radiator filler neck or surge tank, and is a GM-recommended replacement for your vehicle’s original component. It maintains pressure on the cooling system while the engine is operating, which raises the boiling point of the engine coolant. It also replenishes the system with coolant from the expansion tank (if equipped) when the engine cools off. This original equipment radiator cap has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors. Get the GM quality you know and trust with ACDelco GM Original Equipment Thermostats and Caps. Stay with the brand of parts your General Motors vehicle came with and get peace of mind that the fit, form, and function is up to the high standards and specifications of General Motors. ACDelco GM Original Equipment Thermostats and Caps are engineered for virtually every model of GM car, light duty truck, and sport utility vehicle.

Product Features:
  • Seal and maintain pressure on the cooling system for vehicle safety
  • Raise the boiling point of the engine coolant to maintain efficiency
  • Fit most models of GM vehicles for expanded coverage
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Radiator Cap: 15 PSI (Part No.10248)

Radiator Cap: 15 PSI

from

$14.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

Mahle – Water Pump Hsng Gask (Part No.G3031209954MAH)

Water Pump Hsng Gask

from

$10.98
Water Pump Hsng Gask

1995 Pontiac Sunfire Engine Cooling Parts

Maybe you’re in the middle of a full rebuild of that 1995 Pontiac Sunfire. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 61 different Engine Cooling Parts in our inventory ranging from $3.79 to $194.61. That means you can find the exact parts or products you need to keep that 1995 Pontiac Sunfire running smoothly.

Engine Cooling Parts are only as good as their brand. We stock 18 different brands to make sure you have plenty of trusted parts to choose from for your 1995 Pontiac Sunfire. Permatex, Carquest Premium, and Imperial are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Engine Cooling Parts for your 1995 Pontiac Sunfire, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 2,111 reviews in this category, some of the top rated parts include 2 Pole Radiator Fan Motor with 4.4 stars and Electric Fan – 12" Diameter with 3.5 stars.

So if you’re in the market for aftermarket Engine Cooling Parts to keep your 1995 Pontiac Sunfire rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Engine Cooling Parts Brands To Make Your 1995 Pontiac Sunfire Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1995 Pontiac Sunfire demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Sunfire the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.

Popular ACDelco Engine Cooling Parts

We carry ACDelco parts in our stock across Thermostats categories, plus more. For a 1995 Pontiac Sunfire, our most popular ACDelco Engine Cooling Parts include:

FAQs for 1995 Pontiac Sunfire Engine Cooling Parts

What are the most purchased Engine Cooling Parts for the 1995 Pontiac Sunfire?

Out of 61 Engine Cooling Parts for the 1995 Pontiac Sunfire, the most popular in our inventory are:
THERMOSTAT GASKET
from $5.29
(49)
THERMOSTAT GASKET
Thermostat and Water Outlet Gaskets
Standard Thermostat: 195 Degrees
from $9.99
(42)
Standard Thermostat: 195 Degrees
Thermostats
Coolant Temp Sensor Switch
from $24.05
(56)
Coolant Temp Sensor Switch
Coolant Temperature Sensors

What are the top-rated 1995 Pontiac Sunfire Engine Cooling Parts?

Top-rated Engine Cooling Parts for your 1995 Pontiac Sunfire based on customer reviews/ratings are:
2 Pole Radiator Fan Motor
from $34.99
(60)
2 Pole Radiator Fan Motor
“Installed Easially, Works Great!”
Electric Fan - 12" Diameter
from $94.99
(38)
Electric Fan – 12" Diameter
“good”
Engine Water Pump: New, Gasket/Seals Included
from $44.99
(36)
Engine Water Pump: New, Gasket/Seals Included
“Good product.”