from

$66.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$84.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$129.99

100% new; Delphi OE Technology Validated to match the vehicle applications; Manufactured to meet or exceed OE requirements.

Product Features:

Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
All parts are calibrated and tested to match the OE part
Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube.
Delphi OE technology validated to match the vehicle applications

from

$3.49

GM Genuine Parts Multi Purpose Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$49.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$73.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

Delphi’s 100% OE replacement idle air control valves allow for accurate, stable, and precise air flow during the idle phase
Provides superior fit resulting in an easier installations
Maximizes fuel and engine efficiency
Manufactured and engineered with premium quality and stringent standards eliminating potential for malfunctions

from

$6.29

GM Genuine Parts Fuel Pressure Relief Valve Caps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$72.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$75.99

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.
The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.

from

$49.99

CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$18.99

Replace only the damaged connectors instead of the entire fuel line with these direct-replacement fuel line connectors. Designed for easy installation and a precise fit, they are engineered to withstand extreme underhood conditions.

Product Features:

Direct replacement – these fuel line connectors fit and function like the vehicle’s original equipment connectors for reliable, leak-free performance
Quality construction – manufactured from premium materials for a long service life
Saves money – replace only the part, not the entire assembly
Excellent value – original equipment quality at a lower price

from

$32.69

The ACDelco GM Original Equipment Fuel Injector O-Ring Kit is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:

GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$3.49

GM Genuine Parts Vacuum Check Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
GM regularly updates production and service part designs to integrate new materials and technologies

from

$113.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank filler necks meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
Unit is dual coated for enhanced corrosion protection
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
Tested with OE fuel cap to prevent evaporative emission and check engine light failure

from

$332.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Metal tubes in Delphi hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Lower failure rates due to its innovative design and durability
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns

from

$15.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

Filtration performance and micron rating meet or exceed OE requirements
OE replacement strainer designed for use with Delphi electric fuel pumps
Replacing the strainer is always recommended when replacing a fuel pump

from

$24.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$31.49

GM Genuine Parts Fuel Injector Seal Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide liquid-tight connections between the fuel injector and related components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps provide a seal to prevent fuel leaks
Helps seal combustion chamber from the elements
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$27.99

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

NTK’s Air Charge Temperature Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper monitoring of air temperature entering the engine.
The Air Charge Temperature Sensor is used by the Engine Control Unit (ECU) to measure air density for fuel mixture control, which allows it to make continuous adjustments to the engine’s air / fuel mixture for maximum fuel efficiency.

from

$145.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel pump and sender assemblies meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
Product comes with installation instructions, wiring harness and installation hardware where applicable
Includes strainers for smoother installation process and ensures a clean fuel system upon replacement
Precision tested fuel level sensor ensures vehicles fuel gauge will provide an accurate reading at any fuel level
Tested for voltage, amperage, resistance, pressure, and volume to ensure product performance and quality
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Award winning packaging; double layer walls for added strength and projection; new inflated bubble packaging-condensed individual vertical air chambers for added protection
Engineered and developed by Spectra Premium; proud member of the AASA fuel pump manufacturers working group

from

$12.49

To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$20.49

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

High-quality products that meet OE appearance and performance to

from

$43.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$99.99

WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to

from

$67.05

Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$77.99

Carquest Premium fuel tank sending units are built to meet or exceed Original Equipment (O.E.) specifications for fit, form and function. Carquest Premium fuel tank sending units are supplied with the wiring harness and gaskets or seals when required for the application. All sending units are precision-tested ensuring accurate readings at any fuel level. Carquest Premium fuel tank sending units are engineered with superior quality components to provide the longest life and are backed up by an industry-leading warranty.

Product Features:

Meets or exceeds OE specifications for fit, form and function
All sending units are 100% performance tested
Includes installation gaskets or seals where applicable

from

$16.79

Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$248.99

This replacement fuel tank is precision-engineered to match the fit and function of the original fuel tank on specified vehicles.

Product Features:

Reliable replacement – this fuel tank directly replaces the original fuel tank on specified vehicle years, makes and models
Durable construction – this fuel tank is made from the same rugged materials as the original part for dependable service
Quality assured – this part has been validated to ensure a quality fit and long service life
Trustworthy design – backed by team of product specialists in the United States