1995 Oldsmobile 88 Heater Hoses
Enhance and Protect Your 1995 Oldsmobile 88 with Quality Heater Hoses
Maintaining the performance of your 1995 Oldsmobile 88 starts with choosing the right parts, and a high-quality Heater Hoses helps ensure a reliable and efficient vehicle. At Advance Auto Parts, we offer Heater Hoses specifically for the 1995 Oldsmobile 88, ensuring a perfect fit and lasting durability. Choosing to shop with Advance Auto Parts means you’re making a smart decision to prioritize both quality and reliability for your vehicle.
Affordable and Reliable Heater Hoses for Every Budget
Finding a Heater Hoses that combines quality with affordability is easy at Advance Auto Parts. With prices starting as low as $10.64 and an average price of $17.86, you can choose one that fits your budget while delivering the quality you expect. Our Heater Hoses are competitively priced, ranging from $10.64 to $30.49, so you get value without compromising on strength or reliability.
Trusted Brands and Top-Rated Options
With 4 Heater Hoses from 3 trusted brands in stock, Advance Auto Parts has you covered. Popular options include Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 18 Inch Lengths, Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 9 1/4 Inch Lengths, and Expansion Tank Hoses, starting at $10.64. Our selection includes highly regarded brands such as Dayco, Gates, and MacKay, and more, offering you top-notch reliability. For example, we have 2 Dayco Heater Hoses starting at $18.29 with an average rating of 5 stars, 1 Gates options from $15.49 with a 4 stars rating, and 1 MacKay Heater Hoses priced from $10.64 with a 5 stars average rating.
Explore Related Parts for a Complete Solution
To further enhance your 1995 Oldsmobile 88, don’t miss our related parts categories, including Heater Hose Fittings. These additions will round out your repair or upgrade project and ensure your vehicle is ready for any adventure.
Heater Hoses for Your 1995 Oldsmobile 88
Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 18 Inch Length (Part No.80413)
from
$18.29
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- Meets Type EC electro-chemical requirements as specified in SAE J1684
Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 9 1/4 Inch Length (Part No.88392)
from
$30.49
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Gates – Premium Molded Heater Hose (Part No.18801)
from
$15.49
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
Product Features:
See More
Product Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
MacKay – Expansion Tank Hose (Part No.G2030565791MKY)
from
$10.64
Mackay utilizes leading edge rubber technology and compounds, supported by in-house processes from rubber mixing to final product. This ensures hoses are made to the strict specifications required for the advanced motor vehicles of the 21st century. In vehicles of today, a hose has to be designed to withstand the stresses of modern, more compact but powerful engines that run hotter and at a higher pressure. Other factors include smaller engine compartments with poor heat dissipation, aggressive coolant additives, and stray (electrochemical) current that may be conducting through the cooling system. In short, the smaller but more powerful engines of today work a lot harder than the larger engines that were standard before. More heat is generated, higher burst pressures are required in cooling system components, and hoses have to be made tougher to withstand these demands. Mackay’s research and development chemists have developed new rubber formulations and manufacturing processes that ensure Mackay hoses meet the greater wear and heat demands created by modern engines. Rubber compounds used in automotive hoses today are predominantly synthetic rubber formulation. All Mackay coolant hoses are made from EPDM compounds that are highly resistant to ozone attack. Hoses made from some other rubber compounds may be subject to ozone deterioration.
Product Features:
See More
Product Features:
- Excellent resistance to high temperatures
- Resists chemical attack (oils, fuels etc.)
- Excellent Ozone resistance
- Good resistance to abrasion
- High resistance to vibration
FAQs for 1995 Oldsmobile 88 Heater Hoses
Which Heater Hoses are the top sellers for the 1995 Oldsmobile 88?
Out of 4 Heater Hoses that fit 1995 Oldsmobile 88s, the following parts are the top sellers:
from
$18.29
This product is not rated
Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 18 Inch Length
Heater Hoses
from
$30.49
This product is not rated
Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 9 1/4 Inch Length
Heater Hoses
How can I make sure that a part will be compatible with my 1995 Oldsmobile 88?
Our Oldsmobile 88 aftermarket and OEM parts are designed specifically for the 1995 model. You can always find your specific fitment and compatibility for your 1995 Oldsmobile on an individual product page.
What is the price range for 1995 Oldsmobile 88 Heater Hoses?
The range of prices of Heater Hoses for the 1995 Oldsmobile 88 goes from $10.64 up to $30.49 for the most premium parts.
What is the average price of 1995 Oldsmobile 88 Heater Hoses?
Does Advance Auto Parts sell Heater Hoses for other Oldsmobile 88 model years?
Can I get help with 1995 Oldsmobile 88 Heater Hoses orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Oldsmobile Heater Hoses and more.
What is your return policy for Oldsmobile 88 Heater Hoses?
Advance Auto Parts keeps returns simple. For new Oldsmobile 88 Heater Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
Heater Hoses For Other Oldsmobile 88 Model Years
Looking for parts for a different model year of the Oldsmobile 88? Below, you’ll find links to Heater Hoses for a range of model years, from 1992 models all the way up to 1999. At Advance Auto Parts, we carry high-quality OEM and aftermarket auto parts for popular years like 1992, 1993, 1994, 1996, 1997, 1998, 1999, and more, ensuring you have access to the best options for your specific needs. Choosing a Heater Hoses from Advance Auto Parts means investing in top-tier parts that will keep your Oldsmobile 88 running at its best, no matter the year.
