1995 Nissan Maxima Drivetrains

Name: Wheel Hub Assembly
Brand: Timken
SKU: K7001151919TIM
Price: 266.19 USD

Below you will find various in-demand Nissan Drivetrains, components and accessories for your 1995 Maxima. Advance Auto Parts has popular Maxima parts like CV Axles and Joints, Differentials, Transfer Cases and more. You’ll also find aftermarket and OEM Drivetrains for other Maxima model years including 2013, 2014, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and more. Select a category of 1995 Nissan Maxima Drivetrains below and start saving instantly.

Popular 1995 Nissan Maxima Drivetrains Categories

Differential Oil

Drive Shaft and Axles

Drive Shaft Bearings

OE CV Boot Kits

Input Shaft Bearings

Front Differential Pinion Bearings

Essential Drivetrains for 1995 Nissan Maximas

from

$266.19

Timken Wheel Hub Assembly is a single integrated unit that can be bolted directly onto corners, eliminating the need for conventional components like washers, spacers and nuts. Its design provides for lower total system cost, improved performance, reduced weight and lower warranty costs. The Formed Hub utilizes fewer components over conventional 4 x 2 designs, simplifying installation and reducing costs.

Product Features:

Allows the same configuration to be used on driven and non-driven wheels, replacing the conventional 4×2 (dead) spindle.
Features an advanced sensor and sensor technology for superb performance.
Holds bearing setting more consistently than traditional thread and nut designs. The resulting system stiffness reduces rotor run-out and improves brake performance.
Reduces weight by up to 20% per assembly compared to conventional wheel end solutions.
Features an active sensor capable of sensing down to zero speed. Sensor’s speed information can be used for vehicle dynamics control systems, speed control, speedometer, odometer, trip computer and other purposes.
Internally-mounted sensor protects against the elements, which ultimately reduces warranty costs. SENSOR-PAC also utilizes very small sensor-to-target wheel gaps, enabling a much smaller and more cost- effective sensor.
Includes an internally-mounted sensor that protects against debris, corrosion, thermal shock, and other hazards that threaten externally-mounted sensors.
Designed for superior performance in a minimal space. Timken engineers have packaged the sensor within the bearing without increasing overall dimensions to promote high performance and equal load carrying capacity in a minimum space.

from

$30.76

FEQ manufactures OE quality wheel hub assemblies that provide heavy duty performance, improved fuel economy and reduced weight. FEQ wheel bearing hubs are maintenance free – fully lubricated and sealed for life.

Product Features:

Integrated sensors and electronics for reliable function
Factory sealed assembly eliminates contamination
No need for pre-load adjustment at assembly
Compact and lightweight
Minimizes axial space requirements

from

$12.99

High Performance Motor Oil API LICENSED MOTOR OIL Royal Purple High Performance Motor Oil combines premium base oils with proprietary additive technologies to create a high performance synthetic engine oil that optimizes performance and protection. Royal Purple High Performance Motor Oils carry the current API and ILSAC engine oil licenses, as well as the GM dexos1 gasoline engine oil approval. ILSAC GF-6 AND GM DEXOS1 Modern gasoline direct injection (GDI) engines have achieved levels of power and fuel economy never before possible in passenger car engines. As a result, smaller engines operate at much higher loads across all engine speeds. This has caused increased wear in critical areas of the engine, and created a destructive phenomenon called low-speed pre-ignition (LSPI). The unique, state-of-the-art additive technology in Royal Purple High Performance engine oils is designed specifically to address these issues, and help engines maintain performance and reliability.

Product Features:

Better Wear Protection
Increased Protection against Low Speed Pre-Ignition
Increased Fuel Efficiency
Better Protection for Vehicle Exhaust Emissions Equipment
Improved Compatibility with Fuels Containing Ethanol
Superior Corrosion Protection
Made in USA

from

$14.99

Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:

Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
Formulated to help prevent gear wear and protect against rust and corrosion
Formulated to deliver enhanced protection against deposits
Helps provide better protection during extreme operating conditions

from

$6.44

Diff. Side Cover Sea

from

$11.81

Diff. Side Cover Sea

from

$40.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$37.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$114.99

Carquest CV Axle’s are made from the finest materials using premium steel, boot, and grease. Carquest CV Axles are designed to exceed the original equipment specifications for a trouble free ride.

Product Features:

High moly CV joint grease with stainless-steel boot bands

from

$106.99

High moly CV joint grease with stainless-steel boot bands

from

$31.49

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
One piece neoprene boot
Kit complete with boot, grease, and hardware for complete installation
Hardware matches original design requirements
Application specific for this vehicle

from

$29.49

This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself.
Ideal solution – this kit is a reliable replacement for original components that have failed due to wear.
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$5.61

Clamp – CV Boot

from

$2.27

Clamp – CV Boot

from

$14.29

Product Features:

Brand may vary by location

from

$60.99

TAPERED ROLLER BEARI

from

$49.29

With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination

Product Features:

Help restore the vehicle to like-new condition
Constructed of high strength OE materials
Resists environmental contamination
Protects the CV joint from premature failure

from

$41.49

Matches OE form, fit and function
One piece neoprene boot
Kit complete with boot, grease, and hardware for complete installation
Hardware matches original design requirements
Application specific for this vehicle

from

$15.78

Spindle Nut

from

$2.85

The EMPI Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$42.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Matched cup and cone components ensures consistent quality and outstanding performance
Industry leading coverage
Professional technicians know they can depend on National

from

$51.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Matched cup and cone components ensures consistent quality and outstanding performance
Industry leading coverage
Professional technicians know they can depend on National

from

$4.99

This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$3.29

Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$4.99

Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$9.49

This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$7.99

This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$29.49

This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Upgrade your 1995 Nissan Maxima with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 1995 Nissan Maxima, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Nissan or enhancing its overall performance, Drivetrains are key to keeping your Maxima functioning at its best. At Advance Auto Parts, we offer a wide selection of 32 Drivetrains for the 1995 Nissan Maxima, designed to meet your needs without breaking the bank. From CV Axles and Joint replacements to Differentials upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 1995 Nissan Maxima at great prices. Our Drivetrains inventory for this model ranges from just $2.27 to $266.19, with an average price of $61.56. Our 32 Drivetrains in stock come from 14 trusted brands, so you’re sure to find the right part for your 1995 Nissan Maxima without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1995 Nissan Maxima, we stock popular OEM and aftermarket Drivetrains from top names like Idemitsu, Dorman, Carquest Premium, and more. Idemitsu Drivetrains start at just $11.79 and boast an impressive 5 stars average rating from customers. Dorman and Carquest Premium also bring quality to the table, with Drivetrains available starting at $3.29, and at an average 4 stars rating. With 265 customer reviews and counting, our 1995 Nissan Maxima Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1995 Nissan Maxima is always ready to roll. We’re committed to providing you with everything you need to keep your Maxima in top shape, all in one place. Start shopping confidently below for your 1995 Nissan Maxima!

Best-Selling CV Axles and Joints for 1995 Nissan Maximas

Enhance the driving experience in your Nissan with 9 quality CV Axles and Joint components, starting at $2.27.

show more show less

from

$32.99

Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself.
Ideal solution – this kit is a reliable replacement for original components that have failed due to wear.
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$35.99

Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself.
Ideal solution – this kit is a reliable replacement for original components that have failed due to wear.
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$35.87

The Ohno CV Joint Boot Kit is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$31.49

Matches OE form, fit and function
One piece neoprene boot
Kit complete with boot, grease, and hardware for complete installation
Hardware matches original design requirements
Application specific for this vehicle

from

$29.57

Help restore the vehicle to like-new condition
Constructed of high strength OE materials
Resists environmental contamination
Protects the CV joint from premature failure

from

$25.82

Help restore the vehicle to like-new condition
Constructed of high strength OE materials
Resists environmental contamination
Protects the CV joint from premature failure

from

$5.61

Clamp – CV Boot

from

$2.39

Clamp – CV Boot

from

$2.27

Clamp – CV Boot

Most Popular 1995 Nissan Maxima Differentials

Customize your Nissan with 3 Differentials products like Differential Oil, Front Differential Pinion Bearings, and Differential Seals, all priced under $20.99.

show more show less

from

$11.79

Formulated to meet the specific requirements of Toyota, Lexus, and scion vehicles equipped with conventional (non-CVT) transmissions that require the use of ATF T-IV. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF T-IV is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:

Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
Advanced anti-wear technology provides maximum protection to gears and bearings
Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking

from

$20.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$11.81

Diff. Side Cover Sea

Top Picks for 1995 Nissan Maxima Transfer Cases

Upgrade Nissan Maximas with top-quality Transfer Cases parts, including 2 OEM and aftermarket selections for your 1995 model.

show more show less

from

$14.29

Product Features:

Brand may vary by location

from

$60.99

TAPERED ROLLER BEARI

In-Demand Spindles for 1995 Nissan Maximas

Select from 3 premium Spindles parts for your 1995 Nissan Maxima, with prices ranging from $3.29 to $29.49.

show more show less

from

$29.49

This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$3.29

Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$9.49

This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Most Sold 1995 Nissan Maxima Drive Shafts and Axles

Explore our best-selling Nissan parts for the 1995 Maxima among 13 OEM and aftermarket options starting from $2.85.

show more show less

from

$106.99

High moly CV joint grease with stainless-steel boot bands

from

$108.99

Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$114.99

High moly CV joint grease with stainless-steel boot bands

from

$177.99

N

Product Features:

High moly CV joint grease with stainless-steel boot bands

from

$37.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$204.37

The Empire Ind. Axle Assembly is assembled with 100% new components and features precision ground bearing lands and sealing surfaces, as well as cold rolled spines and threads. Empire has over thirty years experience manufacturing drive line components that meet or exceed O.E.M. specifications. Empire Industries 100% New Drive Axles include :

Product Features:

New C.V. Joints – Inner and Outer
New C.V. Boots
New Stainless Steel Boot Clamps
New Retaining Clip and Hardware (where applicable)
New Precision Machined and Heat Treated Center Shafts
New Dust Shields installed (where applicable)
New Axle Nut (where applicable)
New ABS Rings installed (where applicable)
New Inboard Bearing and/or Flange installed (where applicable)
Precision ground Bearing Lands and Sealing Surfaces
New High Temperature / High Pressure Moly Grease

from

$149.81

Axle Assembly

from

$133.89

Axle Assembly

from

$133.77

Axle Assembly

from

$59.39

The FEQ Axle Assembly is assembled with 100% new components and features neoprene boots, high temp moly-grease and new clips and retainers.

Product Features:

OE-Equivalent and a Direct fit Replacement
Utilizes OE style crimp boot clamps
Provides exceptional reliability
100% new OE replacement
Uses top quality Neoprene boots

from

$55.72

The FEQ Axle Assembly is assembled with 100% new components and features neoprene boots, high temp moly-grease and new clips and retainers.

Product Features:

OE-Equivalent and a Direct fit Replacement
Utilizes OE style crimp boot clamps
Provides exceptional reliability
100% new OE replacement
Uses top quality Neoprene boots

from

$4.49

Matches OE form, fit and function
Made with premium grade materials
Quality construction for durability
Designed for under vehicle environment
Application specific for this vehicle

from

$2.85

The EMPI Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

Top-Rated Drivetrains Brands For Your 1995 Nissan Maxima

Shop for the best-rated brands offering Drivetrains and other products for your 1995 Nissan Maximas. Below you’ll find some of our best rated Drivetrains from Idemitsu, Dorman, and Carquest Premium, and more. Drivetrains from these brands that fit a 1995 Maxima start at just $3.29 and are rated as high as 5 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular Idemitsu 1995 Nissan Maxima Drivetrains

When it comes to maintaining or upgrading your 1995 Nissan Maxima, using quality Drivetrains is essential to ensure durability and a perfect fit. Idemitsu ticks all of those boxes. We offer a wide selection of Idemitsu Drivetrains, specifically designed for the 1995 Nissan Maxima. With over 1 Idemitsu brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.79. Plus, with over 2 customer reviews and an average rating of 5 stars, you can trust that our Idemitsu Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$11.79

(2)

Type TLS Automatic Transmission Fluid – 1 qt

“Good product. Will buy again.”

Popular Dorman 1995 Nissan Maxima Drivetrains

Dorman auto parts is one of the highest quality Drivetrain brands in the market. Any 1995 Nissan Maxima owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 1995 Maxima, Advance Auto Parts carries a full inventory of 5 Dorman Drivetrains. Plus you will be keeping your Nissan in peak condition while saving money because prices on these Dorman Drivetrains range from $3.29 to $35.99, plus, with more than 50 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

from
$9.49

This product is not rated

Standard Spindle Nut M24-1.5 Hex Size 36mm (sold by each)

“”

from
$3.29

This product is not rated

Spindle Nut M24-1.5 Hex Size 36mm (sold by each)

“”

from
$29.49

(21)

Standard Spindle Nut M24-1.5 Hex Size 36 mm

“Good”

FAQs for 1995 Nissan Maxima Drivetrains

Which Drivetrains are best-sellers for 1995 Nissan Maximas?

Out of 32 Drivetrains that fit 1995 Nissan Maximas, the following parts are the top sellers:

CV Axle Shaft Assembly (15870392) – $177.99
Type TLS Automatic Transmission Fluid – 1 qt (11359392) – $11.79
Bearings (3273814) – $37.99

What’s the price range for 1995 Nissan Maxima Drivetrains?

Drivetrain prices for the 1995 Nissan Maxima start at $2.27 and go up to $266.19 for the most premium parts.

What’s the average price of a Drivetrain for a 1995 Nissan Maxima?

The average price for Drivetrains for the 1995 Nissan Maxima is $61.56. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other Nissan Maxima model years?

Yes, we currently carry Drivetrains for 41 model years of Nissan Maximas between 1981 and 2023. Drivetrains are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2014, and 2013.

What are the cheapest Drivetrains for my 1995 Nissan Maxima?

The cheapest 1995 Nissan Maxima Drivetrains we carry in stock are:

Clamp – CV Boot (11837437) – $2.27
Clamp – CV Boot (11837237) – $2.39
Axle Shaft Nut (10785271) – $2.85
Spindle Nut M24-1.5 Hex Size 36mm (sold by each) (22148885) – $3.29
Axle Nuts (20570428) – $4.49

What are the top-rated Drivetrains that fit the 1995 Nissan Maxima?

Out of 265 reviews by customers, our 1995 Nissan Maxima Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 1995 Nissan Maxima and their top-rated products:

Spindles
- Standard Spindle Nut M24-1.5 Hex Size 36 mm (11115458) – $29.49
Differentials
- Standard Spindle Nut M24-1.5 Hex Size 36 mm (11115458) – $29.49
Transfer Cases
- Standard Spindle Nut M24-1.5 Hex Size 36 mm (11115458) – $29.49

What types of Drivetrains do you sell for my 1995 Nissan Maxima?

As of 2/5/25, these are some of the most in-demand types of Drivetrains for a 1995 Nissan Maxima:

Can I get help with 1995 Nissan Maxima Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Nissan Drivetrains and more.

What is your return policy for Nissan Maxima Drivetrains?

Advance Auto Parts keeps returns simple. For new Nissan Maxima Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1995 Nissan Maxima Drivetrains

Timken – Wheel Hub Assembly (Part No.K7001151919TIM)

FEQ – Wheel Hub Assembly (Part No.K7001151991FEQ)

Royal Purple – High Performance SAE 5W30 Synthetic Motor Oil, API Certified, 1 QT (Part No.01530)

Valvoline – Transfer Case Fluid, 1 Quart (Part No.855459)

Payen – Diff. Side Cover Sea (Part No.J704184568PAY)

NDK – Diff. Side Cover Sea (Part No.J704184562NDK)

National – Bearings (Part No.305)

National – Bearings (Part No.307-L)

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV53545)

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV53566)

Beck/Arnley – Cu Joint Boot Kit (Part No.103-2288)

Dorman – Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter (Part No.614-001)

Ohno – Clamp – CV Boot (Part No.4I250142473OHN)

EMPI – Clamp – CV Boot (Part No.4I25091156EMP)

Driveworks – Tapered Roller Bearing (Part No.S-30306)

FAG US – TAPERED ROLLER BEARI (Part No.30306A)

EMPI – RE CV Joint Boot Kit (Part No.K6010468367EMP)

Beck/Arnley – Cu Boot Kit (Part No.103-2867)

Dorman – Spindle Nut (Part No.K1002754968DOR)

EMPI – Axle Shaft Nut (Part No.K4030150904EMP)

National – Bearings (Part No.32305)

National – Bearings (Part No.32307)

Dorman – Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (Part No.615-073.1)

Dorman – Spindle Nut M24-1.5 Hex Size 36mm (sold by each) (Part No.615-149)

Dorman – Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (sold by each) (Part No.615-073)

Dorman – Standard Spindle Nut M24-1.5 Hex Size 36mm (sold by each) (Part No.615-113)

Dorman – Spindle Nut M24-1.50 Hex 32mm (Sold by each) (Part No.615-223)

Dorman – Standard Spindle Nut M24-1.5 Hex Size 36 mm (Part No.615-113.1)

Dorman – Uni-Fit C.V. Joint Boot Kit Outer greater than 3.58 In. Diameter (Part No.614-003)

Dorman – Uni-Fit C.V. Joint Boot Kit Inner up to 3.58 In. Diameter (Part No.614-002)

Ohno – CV Joint Boot Kit (Part No.K6010151661OHN)

Beck/Arnley – Cu Joint Boot Kit (Part No.103-2288)

EMPI – RE CV Joint Boot Kit (Part No.K6010181547EMP)

EMPI – RE CV Joint Boot Kit (Part No.K6010181543EMP)

Ohno – Clamp – CV Boot (Part No.4I250142473OHN)

EMPI – Clamp – CV Boot (Part No.4I25091157EMP)

EMPI – Clamp – CV Boot (Part No.4I25091156EMP)

Idemitsu – Type TLS Automatic Transmission Fluid – 1 qt (Part No.10106-042K)

National – Bearings (Part No.205)

NDK – Diff. Side Cover Sea (Part No.J704184562NDK)

Driveworks – Tapered Roller Bearing (Part No.S-30306)

FAG US – TAPERED ROLLER BEARI (Part No.30306A)

Dorman – Standard Spindle Nut M24-1.5 Hex Size 36 mm (Part No.615-113.1)

Dorman – Spindle Nut M24-1.5 Hex Size 36mm (sold by each) (Part No.615-149)

Dorman – Standard Spindle Nut M24-1.5 Hex Size 36mm (sold by each) (Part No.615-113)

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV53566)

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV53532)

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV53545)

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV53531)

National – Bearings (Part No.307-L)

EMPI/Empire – Axle Assembly, New (Part No.K4000193872EMP)

Autopart International Inc – Axle Assembly (Part No.K40001940229API)

Autopart International Inc – Axle Assembly (Part No.K40002006411API)

Autopart International Inc – Axle Assembly (Part No.K40002067590API)

FEQ – Axle Assembly (100% New) (Part No.K4000151904FEQ)

FEQ – Axle Assembly (100% New) (Part No.K4000151903FEQ)

Beck/Arnley – Axle Nuts (Part No.103-0516)

EMPI – Axle Shaft Nut (Part No.K4030150904EMP)