1995 Mitsubishi Galant Drivetrains

Essential Drivetrains for 1995 Mitsubishi Galants

Driveworks – Manual Transmission Input Shaft Seal (Part No.S-712007)

Manual Transmission Input Shaft Seal

from

$5.49
Product Features:
  • Brand may vary by location
See More

FAG US – SHAFT SEAL (Part No.SS2475)

SHAFT SEAL

from

$11.49
SHAFT SEAL

Dorman – Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter (Part No.614-001)

Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter

from

$29.49
This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself.
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear.
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

National – Multi Purpose Seal (Part No.712007)

Multi Purpose Seal

from

$11.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Valvoline – Transfer Case Fluid, 1 Quart (Part No.855459)

Transfer Case Fluid, 1 Quart

from

$14.99
Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:
  • Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
  • Formulated to help prevent gear wear and protect against rust and corrosion
  • Formulated to deliver enhanced protection against deposits
  • Helps provide better protection during extreme operating conditions
See More

Valvoline – DEX/MERC Automatic Transmission Fluid, 1 Gallon (Part No.773636)

DEX/MERC Automatic Transmission Fluid, 1 Gallon

from

$35.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:
  • Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

National – Shaft Repair Sleeve (Part No.99139)

Shaft Repair Sleeve

from

$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

EMPI – Axle Shaft Nut (Part No.K4030533415EMP)

Axle Shaft Nut

from

$5.19
The EMPI Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Corteco – Diff. Side Cover Sea (Part No.J7041150348CFW)

Diff. Side Cover Sea

from

$9.32
Diff. Side Cover Sea

Driveworks – Camshaft Seal (Part No.S-99139)

Camshaft Seal

from

$23.99
Product Features:
  • Brand may vary by location
See More

National – Bearings (Part No.207)

Bearings

from

$32.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Tapered Roller Bearing (Part No.S-32010X)

Tapered Roller Bearing

from

$28.99
Product Features:
  • Brand may vary by location
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV51600)

CV Axle Shaft Assembly

from

$107.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Carquest Premium – New CV Axle (Part No.NCV51573)

New CV Axle

from

$203.99
N

Product Features:
  • High moly CV joint grease with stainless-steel boot bands
See More

Driveworks – Oil Seal (Part No.S-224460)

Oil Seal

from

$4.49
Product Features:
  • Brand may vary by location
See More

Dorman – Spindle Nut M16-1.0 Hex Size 24 mm (Part No.615-082.1)

Spindle Nut M16-1.0 Hex Size 24 mm

from

$15.29
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Castellated Nut Spindle Nut M22-1.5 Hex 32mm (sold by each) (Part No.615-105)

Castellated Nut Spindle Nut M22-1.5 Hex 32mm (sold by each)

from

$11.29
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

National – Shaft Repair Sleeve (Part No.99157)

Shaft Repair Sleeve

from

$37.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Felpro – DIFFERENTIAL GASKET (Part No.RDS 55481)

DIFFERENTIAL GASKET

from

$16.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Beck/Arnley – Cu Joint Boot Kit (Part No.103-2504)

Cu Joint Boot Kit

from

$29.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • One piece neoprene boot
  • Kit complete with boot, grease, and hardware for complete installation
  • Hardware matches original design requirements
  • Application specific for this vehicle
See More

EMPI – RE CV Joint Boot Kit (Part No.K6010182716EMP)

RE CV Joint Boot Kit

from

$39.02
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination

Product Features:
  • Help restore the vehicle to like-new condition
  • Constructed of high strength OE materials
  • Resists environmental contamination
  • Protects the CV joint from premature failure
See More

EMPI – RE CV Joint Boot Kit (Part No.K6010182671EMP)

RE CV Joint Boot Kit

from

$31.22
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination

Product Features:
  • Help restore the vehicle to like-new condition
  • Constructed of high strength OE materials
  • Resists environmental contamination
  • Protects the CV joint from premature failure
See More

Beck/Arnley – Cu Boot Kit (Part No.103-2565)

Cu Boot Kit

from

$31.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • One piece neoprene boot
  • Kit complete with boot, grease, and hardware for complete installation
  • Hardware matches original design requirements
  • Application specific for this vehicle
See More

National – Bearings (Part No.30305)

Bearings

from

$46.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Matched cup and cone components ensures consistent quality and outstanding performance
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Tapered Cone/Cup Wheel Bearing Set (Part No.S-A-35)

Tapered Cone/Cup Wheel Bearing Set

from

$13.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

FAG US – CUP (Part No.LM67010)

CUP

from

$6.69
CUP

National – Bearings (Part No.30207)

Bearings

from

$48.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Matched cup and cone components ensures consistent quality and outstanding performance
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Upgrade your 1995 Mitsubishi Galant with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 1995 Mitsubishi Galant, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mitsubishi or enhancing its overall performance, Drivetrains are key to keeping your Galant functioning at its best. At Advance Auto Parts, we offer a wide selection of 31 Drivetrains for the 1995 Mitsubishi Galant, designed to meet your needs without breaking the bank. From Transfer Case replacements to Spindles upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 1995 Mitsubishi Galant at great prices. Our Drivetrains inventory for this model ranges from just $4.49 to $258.33, with an average price of $43.10. Our 31 Drivetrains in stock come from 15 trusted brands, so you’re sure to find the right part for your 1995 Mitsubishi Galant without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1995 Mitsubishi Galant, we stock popular OEM and aftermarket Drivetrains from top names like Valvoline, Driveworks, Dorman, and more. Valvoline Drivetrains start at just $14.49 and boast an impressive 5 stars average rating from customers. Driveworks and Dorman also bring quality to the table, with Drivetrains available starting at $4.49, and at an average 4 stars rating. With 486 customer reviews and counting, our 1995 Mitsubishi Galant Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1995 Mitsubishi Galant is always ready to roll. We’re committed to providing you with everything you need to keep your Galant in top shape, all in one place. Start shopping confidently below for your 1995 Mitsubishi Galant!

Best-Selling Transfer Cases for 1995 Mitsubishi Galants

Enhance the driving experience in your Mitsubishi with 1 quality Transfer Case components, starting at $5.49.

Driveworks – Manual Transmission Input Shaft Seal (Part No.S-712007)

Manual Transmission Input Shaft Seal

from

$5.49
Product Features:
  • Brand may vary by location
See More

Most Popular 1995 Mitsubishi Galant Spindles

Customize your Mitsubishi with 1 Spindles products like Spindle Lock Nuts, all priced under $11.29.

Dorman – Castellated Nut Spindle Nut M22-1.5 Hex 32mm (sold by each) (Part No.615-105)

Castellated Nut Spindle Nut M22-1.5 Hex 32mm (sold by each)

from

$11.29
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Top Picks for 1995 Mitsubishi Galant CV Axles and Joints

Upgrade Mitsubishi Galants with top-quality CV Axles and Joints parts, including 5 OEM and aftermarket selections for your 1995 model.

Dorman – Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter (Part No.614-001)

Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter

from

$29.49
This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself.
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear.
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Uni-Fit C.V. Joint Boot Kit Inner up to 3.58 In. Diameter (Part No.614-002)

Uni-Fit C.V. Joint Boot Kit Inner up to 3.58 In. Diameter

from

$35.99
This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself.
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear.
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Help – Universal C.V. Joint Boot Kit Front Outer (Part No.03680)

Universal C.V. Joint Boot Kit Front Outer

from

$23.99
Our CV Joint Boots provide various methods of eliminating the removal of the CV joint during installation. Uni-Fit boots can be stretched over the CV Joint and Quick Boots come in halves.

Product Features:
  • Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself.
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Beck/Arnley – Cu Joint Boot Kit (Part No.103-2504)

Cu Joint Boot Kit

from

$29.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • One piece neoprene boot
  • Kit complete with boot, grease, and hardware for complete installation
  • Hardware matches original design requirements
  • Application specific for this vehicle
See More

EMPI – RE CV Joint Boot Kit (Part No.K6010181564EMP)

RE CV Joint Boot Kit

from

$32.55
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination

Product Features:
  • Help restore the vehicle to like-new condition
  • Constructed of high strength OE materials
  • Resists environmental contamination
  • Protects the CV joint from premature failure
See More

In-Demand Differentials for 1995 Mitsubishi Galants

Select from 15 premium Differentials parts for your 1995 Mitsubishi Galant, with prices ranging from $4.49 to $48.49.

Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)

DEXRON - VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

from

$14.49
Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.

Product Features:
  • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Valvoline – DEX/MERC Automatic Transmission Fluid, 1 Gallon (Part No.773636)

DEX/MERC Automatic Transmission Fluid, 1 Gallon

from

$35.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:
  • Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

National – Shaft Repair Sleeve (Part No.99139)

Shaft Repair Sleeve

from

$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Valvoline – Transfer Case Fluid, 1 Quart (Part No.855459)

Transfer Case Fluid, 1 Quart

from

$14.99
Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:
  • Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
  • Formulated to help prevent gear wear and protect against rust and corrosion
  • Formulated to deliver enhanced protection against deposits
  • Helps provide better protection during extreme operating conditions
See More

Driveworks – Taper Bearing Set (Part No.S-A-18)

Taper Bearing Set

from

$10.79
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Driveworks – Tapered Cone/Cup Wheel Bearing Set (Part No.S-A-35)

Tapered Cone/Cup Wheel Bearing Set

from

$13.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Idemitsu – Type TLS Automatic Transmission Fluid – 1 qt (Part No.10106-042K)

Type TLS Automatic Transmission Fluid - 1 qt

from

$11.79
Formulated to meet the specific requirements of Toyota, Lexus, and scion vehicles equipped with conventional (non-CVT) transmissions that require the use of ATF T-IV. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF T-IV is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:
  • Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
  • Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
  • Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
  • Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
  • Advanced anti-wear technology provides maximum protection to gears and bearings
  • Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
See More

National – Shaft Repair Sleeve (Part No.99157)

Shaft Repair Sleeve

from

$37.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

National – Bearings (Part No.207)

Bearings

from

$32.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Royal Purple – HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart) (Part No.11744)

HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart)

from

$12.99
Royal Purple HMX SAE 5W-30 High-Mileage Synthetic Motor Oil, 1 quart is specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles. Formulated with robust zinc/phosphorus anti-wear compounds combined with Royal Purple’s proprietary additive technology Synerlec, HMX is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines. In addition, HMX is fortified with stout detergents to remove engine build-up and deposits, maintain cleanliness and promote engine longevity.

Product Features:
  • Specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles
  • Formulated with robust zinc/phosphorus anti-wear compounds combined with royal purple’s proprietary additive technology
  • Hmx is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines
  • Reduces friction and metal-to-metal contact for peak engine performance
  • Also provides outstanding oxidation resistance to safely extend oil drain intervals, and an ionic attraction to metal surfaces, providing protection and minimizing wear at start-up
  • High-Mileage Formula: Specifically designed for engines with more than 75,000 miles, this full synthetic engine oil helps minimize wear and restore lost performance.
See More

National – Bearings (Part No.30207)

Bearings

from

$48.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Matched cup and cone components ensures consistent quality and outstanding performance
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Felpro – DIFFERENTIAL GASKET (Part No.RDS 55481)

DIFFERENTIAL GASKET

from

$16.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Driveworks – Camshaft Seal (Part No.S-99139)

Camshaft Seal

from

$23.99
Product Features:
  • Brand may vary by location
See More

Corteco – Diff. Side Cover Sea (Part No.J7041150348CFW)

Diff. Side Cover Sea

from

$9.32
Diff. Side Cover Sea

Driveworks – Oil Seal (Part No.S-224460)

Oil Seal

from

$4.49
Product Features:
  • Brand may vary by location
See More

Most Sold 1995 Mitsubishi Galant Drive Shafts and Axles

Explore our best-selling Mitsubishi parts for the 1995 Galant among 9 OEM and aftermarket options starting from $5.19.

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV51571)

CV Axle Shaft Assembly

from

$96.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

National – Multi Purpose Seal (Part No.712007)

Multi Purpose Seal

from

$11.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV51572)

CV Axle Shaft Assembly

from

$97.99
Carquest CV Axle’s are made from the finest materials using premium steel, boot, and grease. Carquest CV Axles are designed to exceed the original equipment specifications for a trouble free ride.

Product Features:
  • High moly CV joint grease with stainless-steel boot bands
See More

Worldpac – AXLE ASSEMBLY (Part No.K4000896392CAR)

AXLE ASSEMBLY

from

$258.33
AXLE ASSEMBLY

Autopart International Inc – Axle Assembly (Part No.K40001925312API)

Axle Assembly

from

$133.73
Axle Assembly

Autopart International Inc – Axle Assembly (Part No.K40002029250API)

Axle Assembly

from

$121.35
Axle Assembly

FEQ – Axle Assembly (100% New) (Part No.K4000188250FEQ)

Axle Assembly (100% New)

from

$102.98
The FEQ Axle Assembly is assembled with 100% new components and features neoprene boots, high temp moly-grease and new clips and retainers.

Product Features:
  • OE-Equivalent and a Direct fit Replacement
  • Utilizes OE style crimp boot clamps
  • Provides exceptional reliability
  • 100% new OE replacement
  • Uses top quality Neoprene boots
See More

FAG US – SHAFT SEAL (Part No.SS2475)

SHAFT SEAL

from

$11.49
SHAFT SEAL

EMPI – Axle Shaft Nut (Part No.K4030533415EMP)

Axle Shaft Nut

from

$5.19
The EMPI Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Top-Rated Drivetrains Brands For Your 1995 Mitsubishi Galant

Shop for the best-rated brands offering Drivetrains and other products for your 1995 Mitsubishi Galants. Below you’ll find some of our best rated Drivetrains from Valvoline, Driveworks, and Dorman, and more. Drivetrains from these brands that fit a 1995 Galant start at just $4.49 and are rated as high as 5 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular Valvoline 1995 Mitsubishi Galant Drivetrains

When it comes to maintaining or upgrading your 1995 Mitsubishi Galant, using quality Drivetrains is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Drivetrains, specifically designed for the 1995 Mitsubishi Galant. With over 3 Valvoline brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.49, with an average price of just $21.82. Plus, with over 55 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

DEXRON - VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
from
$14.49

(2)

DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

“I’ve used this in my 2005 2500HD since I bought the truck with 20k on it now at 280k changed every other year maybe 40k I’d put on in two years,
I pu”

DEX/MERC Automatic Transmission Fluid, 1 Gallon
from
$35.99

(17)

DEX/MERC Automatic Transmission Fluid, 1 Gallon

“Equivalent to oem”

Transfer Case Fluid, 1 Quart
from
$14.99

(36)

Transfer Case Fluid, 1 Quart

“Did not have to use a lot”

Popular Driveworks 1995 Mitsubishi Galant Drivetrains

Driveworks auto parts is one of the highest quality Drivetrain brands in the market. Any 1995 Mitsubishi Galant owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 1995 Galant, Advance Auto Parts carries a full inventory of 5 Driveworks Drivetrains. Plus you will be keeping your Mitsubishi in peak condition while saving money because prices on these Driveworks Drivetrains range from $4.49 to $23.99, plus, with more than 47 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

Oil Seal
from
$4.49
This product is not rated

Oil Seal

“”

Camshaft Seal
from
$23.99
This product is not rated

Camshaft Seal

“”

Manual Transmission Input Shaft Seal
from
$5.49
This product is not rated

Manual Transmission Input Shaft Seal

“”

FAQs for 1995 Mitsubishi Galant Drivetrains

Which Drivetrains are best-sellers for 1995 Mitsubishi Galants?

Out of 31 Drivetrains that fit 1995 Mitsubishi Galants, the following parts are the top sellers:

What’s the price range for 1995 Mitsubishi Galant Drivetrains?

Drivetrain prices for the 1995 Mitsubishi Galant start at $4.49 and go up to $258.33 for the most premium parts.

What’s the average price of a Drivetrain for a 1995 Mitsubishi Galant?

The average price for Drivetrains for the 1995 Mitsubishi Galant is $43.10. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other Mitsubishi Galant model years?

Yes, we currently carry Drivetrains for 27 model years of Mitsubishi Galants between 1985 and 2012. Drivetrains are bought most frequently for the following model years: 2012, 2011, 2010, 2009, 2008, 2007, 2006, 2005, and 2004.

What are the cheapest Drivetrains for my 1995 Mitsubishi Galant?

The cheapest 1995 Mitsubishi Galant Drivetrains we carry in stock are:

What are the top-rated Drivetrains that fit the 1995 Mitsubishi Galant?

Out of 486 reviews by customers, our 1995 Mitsubishi Galant Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 1995 Mitsubishi Galant and their top-rated products:

What types of Drivetrains do you sell for my 1995 Mitsubishi Galant?

As of 2/5/25, these are some of the most in-demand types of Drivetrains for a 1995 Mitsubishi Galant:

Can I get help with 1995 Mitsubishi Galant Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mitsubishi Drivetrains and more.

What is your return policy for Mitsubishi Galant Drivetrains?

Advance Auto Parts keeps returns simple. For new Mitsubishi Galant Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.