1995 Mazda B4000 Air Conditioning Parts

Essential 1995 Mazda B4000 Air Conditioning Parts

Motorcraft – A/C Clutch Pulley (Part No.R10183262908MTR)

A/C Clutch Pulley

from

$139.61
A/C Clutch Pulley

Carquest – A/C and Heater Relay (Part No.R3177)

A/C and Heater Relay

from

$23.29
Product Features:
  • Premium components and our own manufactured circuit board ensure precise operation, reliability, and extra durability for a longer service life
  • Our electronic voltage regulator PC boards are encapsulated in epoxy to deliver improved performance and resistance to failure that may be caused by vibration and corrosion of electrical connections
  • All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.
See More

KAI – A/C Evaporator Core (Part No.EVA010206)

A/C Evaporator Core

from

$138.99
New Standard Replacement A/C Evaporator Core

Product Features:
  • Made Of Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

National – Bearings (Part No.5001-KFF)

Bearings

from

$33.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Dorman – Help – Air Conditioning Bypass Pulley (Part No.34184)

Air Conditioning Bypass Pulley

from

$63.99
This A/C compressor bypass pulley is a cost-effective solution to allow the original equipment drive belt to be used while bypassing an inoperable A/C compressor.

Product Features:
  • Cost-effective solution – this bypass pulley retains the use of the standard drive belt after a failed A/C compressor is removed.
  • Durable components – this bypass pulley uses quality components for a long service life
  • Easy to install – uses the same mounting points as the A/C compressor
  • Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life
See More

Carquest Premium – A/C Clutch Cycle Switch Connector (Part No.PTA1128)

A/C Clutch Cycle Switch Connector

from

$20.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – ABS sensor (Part No.ARC1005)

ABS sensor

from

$29.99
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:
  • High grade materials that are equal to or better than OE provide durability and long service life
  • All ABS sensors are tested for proper fit, form, and function
  • Wire diameter and sheathing same or larger than OE to ensure product quality
  • Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
  • Includes all necessary brackets and hardware
See More

Carquest Premium – A/C Blue Orifice Tube (Part No.T38621)

A/C Blue Orifice Tube

from

$4.99
Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
  • Color coded
See More

Factory Air – System Mounted Cycling Pressure Switch (Part No.36486)

System Mounted Cycling Pressure Switch

from

$18.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Contains gaskets, O-rings, or seals to properly replace the product
  • Color coded for easy identification
  • Zinc coated to resist corrosion
  • Vehicle specific applications
See More

Carquest Premium – A/C Condenser (Part No.1064)

A/C Condenser

from

$111.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:
  • This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
  • The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
  • Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
  • Our condensers are manufactured from rigid design standards to fit OEM dimensions.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
See More

Carquest Premium – Multi Purpose Relay (Part No.RAA1234)

Multi Purpose Relay

from

$19.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Metrix – Receiver Drier (Part No.R1040376454MTX)

Receiver Drier

from

$47.61
METRIX receiver driers are manufactured to OE specifications and provide durable, efficient performance. The OE engineered internal components provide enhanced separation of liquid and vapor, along with a desiccant filter that effectively controls moisture and helps protect the entire A/C system against corrosion. METRIX receiver driers features a lightweight aluminum assembly and provides an exact fit, just as an OE-quality part should.

Product Features:
  • OE-Quality – Exact Fit
  • Utilizes factory style fittings and connectors
  • Compatible with both R12 and R134A refrigerant
  • Manufactured using the highest quality components
  • Meets or exceeds the manufacturers specifications for fit quality and durability Installation Note: Receiver driers or accumulators, and expansion devices should be replaced any time an A/C system is opened. Individual A/C component warranties may be void if these items are not replaced.
See More

Factory Air – Green Round O-Ring (Part No.24650)

Green Round O-Ring

from

$1.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More

Carquest Premium – A/C Discharge and Suction Line Hose Assembly (Part No.T55322)

A/C Discharge and Suction Line Hose Assembly

from

$139.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

Motorcraft – A/C Compressor Clutc (Part No.R1202680526MTR)

A/C Compressor Clutc

from

$19.54
A/C Compressor Clutc

Carquest Premium – A/C Compressor Relay Connector (Part No.PTA1465)

A/C Compressor Relay Connector

from

$44.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – A/C Compressor and Component Kit (Part No.1971K)

A/C Compressor and Component Kit

from

$331.99
Save time on installation with everything you need in one box for an air conditioning replacement. The Carquest Premium A/C Compressor and Component Kit includes the necessary compressor, accumulator/receiver drier, and orifice tube/expansion valve, along with the necessary O-rings, gaskets, and oil. The parts are manufactured with strict quality standards from Gilmore, a climate control partner to Advance Auto Parts for over 25 years.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • Accumulators and receiver driers meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators are helium leak tested prior to packaging.
  • Each orifice tube and expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • The specific PAG oil required by your vehicle application is included.
  • O-rings and gaskets for all parts are application specific and packaged with the correct part to save time and eliminate the possibility of a leak from using the wrong O-ring or gasket.
See More

KAI – A/C System Seal Kit (Part No.FTT010023)

A/C System Seal Kit

from

$19.99
New Standard Replacement A/C System Seal Kit, MT2527, L4 Engine

Product Features:
  • MT2527, L4 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Air Conditioning Pressure Sensor (Part No.904-618)

Air Conditioning Pressure Sensor

from

$56.99
Air conditioning stopped working? It could be as simple as the pressure switch. This replacement A/C transducer switch is the fix for corroded terminals or a broken connector on the original switch. A direct replacement to restore air conditioning.

Product Features:
  • Direct replacement – this A/C transducer switch is an exact replacement for the original switch
  • Simple repair – this A/C switch replaces an existing switch with corroded terminals or a broken connector
  • Easy installation – no special tools required
  • Quality tested – switch has been tested to ensure proper fit and function
See More

Factory Air – New Ford FS10 Clutch Assembly w/ Coil (Part No.47867)

New Ford FS10 Clutch Assembly w/ Coil

from

$129.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All mounting hardware included
  • Every coil tested for proper ohms
  • Vehicle specific applications
  • Coated to prevent corrosion
See More

Factory Air – Green Round O-Ring (Part No.24608)

Green Round O-Ring

from

$1.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More

Factory Air – Green Round O-Ring (Part No.24610)

Green Round O-Ring

from

$0.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More

Santech – A/C Valve Core (Part No.R1128358635SII)

A/C Valve Core

from

$9.74
A/C Valve Core

KAI – Valve Core/Cap Kit (Part No.FTT010108)

Valve Core/Cap Kit

from

$16.99
New Standard Replacement A/C System Valve Core And Cap Kit

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – A/C New, with Clutch, with FS10 Compressor (Part No.T58169)

A/C New, with Clutch, with FS10 Compressor

from

$226.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
See More

Carquest Premium – A/C New, with Clutch, with FS10 Compressor (Part No.T58132)

A/C New, with Clutch, with FS10 Compressor

from

$241.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
  • Matched high-quality needle-roller bearing ensures low friction and high load capability.
  • Light weight aluminum energy-saving casting used for construction.
See More

Carquest Standard – Reman Ford FS10 Compressor w/ Clutch (Part No.DW57169)

Reman Ford FS10 Compressor w/ Clutch

from

$204.99
Remanufactured Compressors are built in a ISO9001:2015 Certified facility to ensure consistent quality stAndards in the Re-manufacturing process
See More

DENSO – New Compressor With Clutch (Part No.471-8109)

New Compressor With Clutch

from

$311.99
As one of the world’s largest OE suppliers of A/C compressors, DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO, we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors, you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO’s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.

Product Features:
  • DENSO is the world’s largest OE supplier of A/C compressors
  • Each compressor is precision manufactured for exact replacement
  • Designed for high output and extended durability
  • Highest quality in the Aftermarket
See More

1995 Mazda B4000 Air Conditioning Parts

Maybe you’re in the middle of a full rebuild of that 1995 Mazda B4000. Maybe you just need a couple of Air Conditioning Parts. Either way, Advance Auto Parts has 50 different Air Conditioning Parts in our inventory ranging from $0.99 to $372.17. That means you can find the exact parts or products you need to keep that 1995 Mazda B4000 running smoothly.

Air Conditioning Parts are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 1995 Mazda B4000. Carquest Premium, Factory Air, and Carquest are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Air Conditioning Parts for your 1995 Mazda B4000, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 440 reviews in this category, some of the top rated parts include Speed Sensor, Rear Differential with 4.6 stars and New Ford FS10 Clutch Assembly w/ Coil with 4.7 stars.

So if you’re in the market for aftermarket Air Conditioning Parts to keep your 1995 Mazda B4000 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Air Conditioning Parts Brands To Make Your 1995 Mazda B4000 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1995 Mazda B4000 demands trusted brand parts and products to keep it running. Many trusted brands of Air Conditioning Parts make up Advance Auto Parts’ inventory, and all are ready to help make your B4000 the best it can be. Be sure to browse some of our top Air Conditioning Parts brands and parts.

Popular Carquest Premium Air Conditioning Parts

We carry Carquest Premium parts in our stock across AC Compressor With Clutch and AC Evaporators categories, plus more. For a 1995 Mazda B4000, our most popular Carquest Premium Air Conditioning Parts include:
A/C New, with Clutch, with FS10 Compressor
from $241.99
(16)
A/C New, with Clutch, with FS10 Compressor
AC Compressor With Clutch
A/C Plate and Fin Evaporator
from $99.99
(2)
A/C Plate and Fin Evaporator
AC Evaporators
A/C Accumulator
from $44.99
(3)
A/C Accumulator
Accumulator and Receiver Driers

FAQs for 1995 Mazda B4000 Air Conditioning Parts

What are the most purchased Air Conditioning Parts for the 1995 Mazda B4000?

Out of 50 Air Conditioning Parts for the 1995 Mazda B4000, the most popular in our inventory are:
Cap & Valve A/C System Seal Kit
from $17.99
(29)
Cap & Valve A/C System Seal Kit
AC Line O-Rings
A/C and Heater Relay
from $23.29
(24)
A/C and Heater Relay
AC Compressor Cut-Out Relays
A/C Red Orifice Tube
from $2.99
(19)
A/C Red Orifice Tube
Expansion Valve and Orifice Tubes

What are the top-rated 1995 Mazda B4000 Air Conditioning Parts?

Top-rated Air Conditioning Parts for your 1995 Mazda B4000 based on customer reviews/ratings are:
Speed Sensor, Rear Differential
from $23.99
(48)
Speed Sensor, Rear Differential
“Worked great.”
New Ford FS10 Clutch Assembly w/ Coil
from $129.99
(25)
New Ford FS10 Clutch Assembly w/ Coil
“Parts were well made and fit well”
Air Conditioning Bypass Pulley
from $63.99
(15)
Air Conditioning Bypass Pulley
“Worked out great to bypass the seized AC compressor.”