1995 Mazda B3000 Drivetrains

Essential 1995 Mazda B3000 Drivetrains

Yukon Gear – Pinion Install Kit For Ford 7.5" Differential (Part No.13039)

Pinion Install Kit For Ford 7.5" Differential

from

$184.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Ford 7.5″
  • Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – 1541H Alloy 5 Lug Right Hand Rear Axle For (’93-’97 Only) Ford 7.5" And 8.8" Ranger (Part No.21201)

1541H Alloy 5 Lug Right Hand Rear Axle For ('93-'97 Only) Ford 7.5" And 8.8" Ranger

from

$234.99
Yukon 1541H alloy 5 lug right hand rear axle for (’93-’97 only) Ford 7.5″ and 8.8″ Ranger with a length of 27-5/16″ inches and 28 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a C-clip axle.

Product Features:
  • Fits 1993-1997 Ford Ranger
  • Right hand side
  • 28 spline
  • 27 5/16″ long
  • 5 lug
See More

National – Bearings (Part No.S-268)

Bearings

from

$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Bearing Install Kit For Ford 7.5" Differential (Part No.11039)

Bearing Install Kit For Ford 7.5" Differential

from

$228.99
Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:
  • Fits Ford 7.5″
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve, marking compound and brush.
See More

National – Shaft Repair Sleeve (Part No.99166)

Shaft Repair Sleeve

from

$34.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

MOOG Driveline Products – Double Cardan CV Ball Kit (Part No.617)

Double Cardan CV Ball Kit

from

$59.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Designed for ease of installation
  • Includes necessary hardware
  • Designed for superior performance
  • Designed for ultimate strength
  • Increased tolerance for a performance fit
  • Meets deflection parameters
See More

MOOG Driveline Products – Double Cardan CV H Yoke (Part No.647)

Double Cardan CV H Yoke

from

$71.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Machined bodies to meet the tight tolerances
  • Forged and cast material to meet the performance requirement
  • Minimize the flash lines for less interference
  • Cleaning process induces compressive strength for increased performance
  • Machined and threaded holes for mounting ease
  • Rust preventative added for longer shelf life
See More

Yukon Gear – Replacement Outer Stub Dust Shield For Dana 30, Dana 44 & Model 35 (Part No.33015)

Replacement Outer Stub Dust Shield For Dana 30, Dana 44 & Model 35

from

$6.99
Product Features:
  • Outer stub dust shield for Dana Spicer 30, 44 and AMC Model 35 IFS
See More

Yukon Gear – Side Gear And Thrust Washer (0.875" Shaft) For 8.8" Ford (Part No.33300)

Side Gear And Thrust Washer (0.875" Shaft) For 8.8" Ford

from

$11.99
Side gear thrust washer (0.875″ shaft) for 8.8″ Ford.

Product Features:
  • Side gear thrust washer for Ford 8.8″
  • 0.875″ diameter cross pin shaft applications only
See More

National – Multi Purpose Seal (Part No.710453)

Multi Purpose Seal

from

$28.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Yukon Gear – Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette (Part No.55002)

Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette

from

$59.99
Product Features:
  • Super carrier shim kit for Ford 8.8″, GM 12 bolt passenger car and truck, GM 8.0″, 8.6″, 8.6″ IRS and 1963-1979 Corvette
  • Interlocking design makes installation much easier
See More

Yukon Gear – Spring Kit For Dana 28, Model 35IFS, Dana 44IFS & Dana 50IFS With Grizzly, Detroit, Tt Or Pl (Part No.33263)

Spring Kit For Dana 28, Model 35IFS, Dana 44IFS & Dana 50IFS With Grizzly, Detroit, Tt Or Pl

from

$44.99
Product Features:
  • Spring kit for Dana Spicer 28, AMC Model 35 IFS, Dana Spicer 44 IFS and Dana Spicer 50 IFS
  • Allows for installation of positraction or locker
See More

Yukon Gear – Positraction Internals For 8.8" Ford With 28 Spline Axles (Part No.16015)

Positraction Internals For 8.8" Ford With 28 Spline Axles

from

$336.99
Yukon positraction internals for 8.8″ Ford with 28 spline axles. This kit fits Yukon Gura Grip & Eaton positractions. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit does not include clutches. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fits Ford 8.8″ with Yukon Dura Grip positraction with 28 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Dorman – Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (Part No.615-073.1)

Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm

from

$4.99
This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Felpro – Differential Cover Gasket (Part No.RDS 55393)

Differential Cover Gasket

from

$6.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt

from

$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:
  • Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
  • 1/2″ head
See More

Yukon Gear – Replacement Oil Baffle For Model 35 IFS Front, Dana 25, 27, 30, 44 IFS & Disconnect And Dana 50 (Part No.33002)

Replacement Oil Baffle For Model 35 IFS Front, Dana 25, 27, 30, 44 IFS & Disconnect And Dana 50

from

$4.99
Product Features:
  • Oil baffle for Dana Spicer 30, Dana Spicer 44 IFS, Dana Spicer 50, AMC Model 35 IFS
See More

Richmond Gear – RngPnn (Part No.69-0376-1)

RngPnn

from

$359.99
RngPnn

Yukon Gear – 3 Qt – Penzoil 80W90 Conventional Gear Oil (Part No.15002)

3 Qt - Penzoil 80W90 Conventional Gear Oil

from

$44.99
3 Qt. Penzoil 80W90 conventional gear Oil.

Product Features:
  • Includes three quarts of conventional oil
See More

National – Multi Purpose Bearing (Part No.HBD-206-FF)

Multi Purpose Bearing

from

$76.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.B-2110)

Bearings

from

$17.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Shaft Repair Sleeve (Part No.99106)

Shaft Repair Sleeve

from

$33.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Yukon Gear – Mini Spool For Ford 8.8" With 28 Spline Axles (Part No.32225)

Mini Spool For Ford 8.8" With 28 Spline Axles

from

$218.99
Mini spools are a low-cost traction option for vehicles looking for full-time lockup. The mini spool installs into a standard open carrier and give 100% power to both tires at all times. These units are not recommended for street-driven vehicles. We recommend full spools for vehicles with large tires or high horsepower. These units come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 8.8″ with 28 spline axles
  • Provides 100% traction to both wheels at all times
  • Installs into standard open carrier case
See More

Yukon Gear – Dana 28 & Dana 30 Pinion Gear Thrust Washer (Part No.33285)

Dana 28 & Dana 30 Pinion Gear Thrust Washer

from

$7.99
Dana 28 & Dana 30 pinion gear Thrust washer. Also fits AMC Model 35 with 1.560″ side gear bore only.

Product Features:
  • Pinion gear thrust washer for Dana Spicer 25, 27 and 30
See More

Dorman – Spindle Nut 1-5/8 In.-16 Hex Size 2-3/16 In. (sold by each) (Part No.615-137)

Spindle Nut 1-5/8 In.-16 Hex Size 2-3/16 In. (sold by each)

from

$22.49
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (sold by each) (Part No.615-072)

Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (sold by each)

from

$3.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Forged Yoke For Ford 8.8" With A 1350 U/Joint Size (Part No.41051)

Forged Yoke For Ford 8.8" With A 1350 U/Joint Size

from

$246.99
Yukon forged yoke for Ford 8.8″ with a 1350 U/joint size (stronger than billet). 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 8.8″
  • 30 spline
  • 1350 u-joint size
  • Outside snap ring design
  • 3.625″ snap ring span
  • 1.188″ cap diameter
  • U-bolt style
See More

Yukon Gear – Yoke For Ford 8.8" Truck Or Passenger With A 1330 U/Joint Size (Part No.41049)

Yoke For Ford 8.8" Truck Or Passenger With A 1330 U/Joint Size

from

$209.99
Yukon yoke for Ford 8.8″ truck or passenger with a 1330 U/joint size. 3.625″ snap ring span, 1.125″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 8.8″
  • 30 spline
  • 1330 u-joint size
  • 3.625″ snap ring span
  • 1.062″ cap diameter
  • Outside snap ring design
  • Strap style
See More

Popular 1995 Mazda B3000 Drivetrains Categories

1995 Mazda B3000 Drivetrains

You count on your 1995 Mazda B3000 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 345 Drivetrains ranging in price from $0.99 to $2,064.99, you’re sure to find everything you need for your 1995 Mazda B3000.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 22 different brands like Valvoline, Moog, and National. 1995 Mazda B3000 Drivetrains start as low as $0.99!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 2,036 extensive product reviews on 1995 Mazda B3000 Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 4.4 stars and Bearings with 4.2 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1995 Mazda B3000 below to get started!

Top-Rated Drivetrains Brands For Your 1995 Mazda B3000

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1995 Mazda B3000 running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, National, and even more.

Popular Milemarker Drivetrains

You’ll find popular Milemarker brand products across 4WD Components. All are waiting to get your 1995 Mazda B3000 back on the road. Some of the top-rated Milemarker products in these categories are:
MileMarker Supreme; Manual Hub
from $353.99
(2)
MileMarker Supreme; Manual Hub
4WD Hubs

FAQs for 1995 Mazda B3000 Drivetrains

What are the most purchased Drivetrains for the 1995 Mazda B3000?

Out of 345 Drivetrains for the 1995 Mazda B3000, the most popular in our inventory are:
Greaseable Premium Universal Joint
from $19.99
(82)
Greaseable Premium Universal Joint
U-Joints
Universal Joint
from $15.99
(33)
Universal Joint
U-Joints

What are the top-rated 1995 Mazda B3000 Drivetrains?

Top-rated Drivetrains for your 1995 Mazda B3000 based on customer reviews/ratings are:
Greaseable Super Strength Universal Joint
from $47.99
(39)
Greaseable Super Strength Universal Joint
“Great”
Bearings
from $16.99
(39)
Bearings
“Perfect fit. Make sure you get your bearings completely filled with grease when reassembling your hubs.”
Oil Seal
from $5.49
(38)
Oil Seal
“Exact fit , price was good”