1995 Mazda B2300 Drivetrains

Essential Drivetrains for 1995 Mazda B2300s

National – Multi Purpose Bearing (Part No.HBD-206-FF)

Multi Purpose Bearing

from

$76.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Dorman – Rear Drive Shaft (Part No.936-288)

Rear Drive Shaft

from

$696.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

National – Bearings (Part No.A-5)

Bearings

from

$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Needle Bearing (Part No.S-B-2110)

Needle Bearing

from

$7.49
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Powertrax – Lock Right Locker (Part No.1830-LR)

Lock Right Locker

from

$444.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Felpro – Differential Cover Gasket (Part No.RDS 55393)

    Differential Cover Gasket

    from

    $6.49
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Sealed Power – Engine Auxiliary Shaft Bearing Set (Part No.1460M)

    Engine Auxiliary Shaft Bearing Set

    from

    $22.99
    Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

    Product Features:
    • Steel-backed Babbitt lining material
    • Used in automotive and high-performance
    • Babbitt is designed to perform under extreme loads w/o damaging other engine parts
    • Babbitt is more environmentally friendly than other material
    • ISO & QS certified manufacturing
    See More

    Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6061)

    Center Support Bearing Motor Mount: Center, 1 Piece

    from

    $14.79
    Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to FORD 84-98;. Please verify your application.

    Product Features:
    • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
    • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
    • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
    • For Years: 1984-1998
    • Weight approx: 2 Lbs
    • BEARING ID / BORE: 1.2570 INCH / 32 MM
    • CENTERLINE: 2.00 INCH / 51 MM
    • MOUNT WIDTH: 5.90 INCH / 150 MM
    See More

    Spicer – Universal Joint (Part No.5-1310X)

    Universal Joint

    from

    $35.99
    You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
    See More

    Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4104)

    Differential Pinion Solid Spacer Kit w/Shims

    from

    $10.49


    Product Features:
    • SOLID SPACER FORD 8.8″ & 9″
    See More

    Dorman – U-BOLT KIT (Part No.929-763)

    U-BOLT KIT

    from

    $30.99
    The components in this leaf spring axle U-bolt kit are designed to securely hold the leaf spring or leaf spring bundle to the underside of an axle of a vehicle or trailer. Check the leaf spring dimensions and other relevant application details to select the right type and size U-bolt kit for your needs.

    Product Features:
    • Reliable hardware – the components in this leaf spring axle U-bolt kit are designed to securely hold the leaf spring or leaf spring bundle to the underside of a vehicle or trailer axle
    • Check fit – carefully review the dimensions of the leaf springs that will be used and other relevant application details to select the right type and size U-bolt kit for your needs
    • Durable construction – the components in this kit are engineered from quality materials for reliable performance and long service life
    • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
    See More

    Yukon Gear – 1541H Alloy 5 Lug Right Hand Rear Axle For (’93-’97 Only) Ford 7.5" And 8.8" Ranger (Part No.21201)

    1541H Alloy 5 Lug Right Hand Rear Axle For ('93-'97 Only) Ford 7.5" And 8.8" Ranger

    from

    $234.99
    Yukon 1541H alloy 5 lug right hand rear axle for (’93-’97 only) Ford 7.5″ and 8.8″ Ranger with a length of 27-5/16″ inches and 28 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a C-clip axle.

    Product Features:
    • Fits 1993-1997 Ford Ranger
    • Right hand side
    • 28 spline
    • 27 5/16″ long
    • 5 lug
    See More

    National – Multi Purpose Seal (Part No.710455)

    Multi Purpose Seal

    from

    $6.99
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    Dorman – Spindle Nut 1-5/8 In.-16 Hex Size 2-3/16 In. (Sold by each) (Part No.615-137)

    Spindle Nut 1-5/8 In.-16 Hex Size 2-3/16 In. (Sold by each)

    from

    $22.49
    This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

    Product Features:
    • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
    • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Milemarker – MileMarker Supreme; Manual Hub (Part No.428)

    MileMarker Supreme; Manual Hub

    from

    $353.99
    Ultimate in style and service. Latest patented technology. Smooth operation. Limited lifetime warranty. 10 spline, 6 bolts. Chrome.

    Product Features:
    • Ultimate In Style And Service
    • Latest Patented Technology
    • Smooth Operation
    • Limited Lifetime Warranty
    See More

    National – Bearings (Part No.M802048)

    Bearings

    from

    $23.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Milemarker – Hub Conversion Kit (Part No.95-27997)

    Hub Conversion Kit

    from

    $97.99
    Converts automatic to manual.

    Product Features:
    • Hub Conversion Kit
    See More

    FAG US – BEARING (Part No.6207)

    BEARING

    from

    $15.49
    BEARING

    Motive Gear – Differential Bearing Kit – Koyo (Part No.R7.5FR)

    Differential Bearing Kit - Koyo

    from

    $91.99
    Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

    Product Features:
    • FORD 7.5″ BEARING & SEAL KIT
    See More

    Motive Gear – Differential Pinion Nut (Part No.379570S)

    Differential Pinion Nut

    from

    $6.49
    All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
    See More

    Motive Gear – Differential Ring and Pinion (Part No.F7.5-308)

    Differential Ring and Pinion

    from

    $238.99


    Product Features:
    • FRD 10BL 7.5 R/P 3.08 MG
    See More

    Motive Gear – Differential Carrier Gear Kit (Part No.F7.5BI)

    Differential Carrier Gear Kit

    from

    $159.99


    Product Features:
    • INTERNALS FORD 7.5
    See More

    Neapco – Universal Joint (Part No.1-0025)

    Universal Joint

    from

    $2.59
    Universal Joint Strap Kit
    See More

    Motive Gear – Ring Gear Bolt (Part No.D5AZ4216A)

    Ring Gear Bolt

    from

    $1.99


    Product Features:
    • Ford 7.5″, 8.8″ Ring Gear Bolt
    See More

    Dorman – Differential Cover (Part No.697-710)

    Differential Cover

    from

    $52.99
    This direct replacement differential cover matches the fit and function of the original equipment diff cover for a reliable, leak-free repair. It features a durable design, made to strict specifications, to help ensure reliable service life.

    Product Features:
    • Direct replacement – this differential cover matches the fit and function of the original equipment diff cover on select vehicles.
    • Reliable repair – the smart solution for fixing an existing cover that’s rusted, damaged or leaking differential fluid.
    • Durable construction – this differential cover is made according to strict engineering standards to help ensure dependability
    • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
    See More

    Felpro – Transfer Case Adapter Gasket (Part No.55484)

    Transfer Case Adapter Gasket

    from

    $31.49
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific, providing unsurpassed quality for a seal you can trust
    • Validated for fit, form, and function
    • Engineered for the sealing repair environment
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    National – Bearings (Part No.M88048)

    Bearings

    from

    $15.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    FAG US – CONE (Part No.KM86649)

    CONE

    from

    $18.99
    CONE

    Upgrade your 1995 Mazda B2300 with Top-Quality Drivetrains

    When it comes to maintaining or upgrading your 1995 Mazda B2300, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mazda or enhancing its overall performance, Drivetrains are key to keeping your B2300 functioning at its best. At Advance Auto Parts, we offer a wide selection of 136 Drivetrains for the 1995 Mazda B2300, designed to meet your needs without breaking the bank. From Universal Joint replacements to Drive Shafts and Axles upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

    Affordable Prices and Wide Selection

    Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 1995 Mazda B2300 at great prices. Our Drivetrains inventory for this model ranges from just $1.99 to $1,459.99, with an average price of $95.86. Our 136 Drivetrains in stock come from 24 trusted brands, so you’re sure to find the right part for your 1995 Mazda B2300 without overspending.

    Top Brands and High Customer Satisfaction

    Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1995 Mazda B2300, we stock popular OEM and aftermarket Drivetrains from top names like Spicer, Moog, Driveworks, and more. Spicer Drivetrains start at just $28.99 and boast an impressive 5 stars average rating from customers. Moog and Driveworks also bring quality to the table, with Drivetrains available starting at $4.79, and at an average 4 stars rating. With 857 customer reviews and counting, our 1995 Mazda B2300 Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

    Explore Related Parts and More

    While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1995 Mazda B2300 is always ready to roll. We’re committed to providing you with everything you need to keep your B2300 in top shape, all in one place. Start shopping confidently below for your 1995 Mazda B2300!

    Best-Selling Universal Joints for 1995 Mazda B2300s

    Enhance the driving experience in your Mazda with 26 quality Universal Joint components, starting at $4.49.

    MOOG Driveline Products – Universal Joint Strap Kit (Part No.437-10)

    Universal Joint Strap Kit

    from

    $8.99
    By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

    Product Features:
    • For U-Joints 354, 369 & 437G
    • Contains two 1.59″ bolt center clamps and four 1/4-28 x 5/8″ cap screws
    See More

    Spicer – Universal Joint (Part No.5-153X)

    Universal Joint

    from

    $28.99
    When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
    See More

    Spicer – Universal Joint (Part No.5-213X)

    Universal Joint

    from

    $39.99
    When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
    See More

    Neapco – Universal Joint (Part No.1-0297)

    Universal Joint

    from

    $5.59
    Universal Joint
    See More

    MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.354)

    Greaseable Premium Universal Joint

    from

    $25.99
    Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
    • KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    • Cross forging shape and flash provide easier installation and high strength
    See More

    MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.369)

    Greaseable Premium Universal Joint

    from

    $19.99
    Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for fleets, off-highway and commercial vehicles
    • STRONG AND DURABLE — Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • GREASEABLE DESIGN — Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
    • INHIBITS PREMATURE WEAR — Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
    • RELIABLE PERFORMANCE — Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    See More

    Driveworks – Universal Joint (Part No.DW-354)

    Universal Joint

    from

    $15.99
    DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

    Product Features:
    • The cross is hot forged for the higher torque and horsepower
    • The bearing cups are made by cold forging, having higher strength and better rigidity
    • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
    • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
    • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
    • Snap rings are held to strict tolerances to ensure proper cup position and retention
    • Nitrile rubber seals to optimize grease retention and reduce contamination
    See More

    MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.254)

    Non-Greaseable Super Strength Universal Joint

    from

    $32.99
    Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
    • CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
    • STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    See More

    MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.371)

    Non-Greaseable Super Strength Universal Joint

    from

    $24.99
    Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
    • CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
    • STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    See More

    MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.377)

    Greaseable Super Strength Universal Joint

    from

    $47.99
    Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
    • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    See More

    MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.269)

    Non-Greaseable Super Strength Universal Joint

    from

    $32.99
    Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    See More

    MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.280)

    Greaseable Super Strength Universal Joint

    from

    $32.99
    Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
    • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    See More

    Driveworks – Universal Joint (Part No.DW-377)

    Universal Joint

    from

    $15.99
    DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

    Product Features:
    • The cross is hot forged for the higher torque and horsepower
    • The bearing cups are made by cold forging, having higher strength and better rigidity
    • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
    • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
    • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
    • Snap rings are held to strict tolerances to ensure proper cup position and retention
    • Nitrile rubber seals to optimize grease retention and reduce contamination
    See More

    Driveworks – Universal Joint (Part No.DW-369)

    Universal Joint

    from

    $15.99
    DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

    Product Features:
    • The cross is hot forged for the higher torque and horsepower
    • The bearing cups are made by cold forging, having higher strength and better rigidity
    • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
    • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
    • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
    • Snap rings are held to strict tolerances to ensure proper cup position and retention
    • Nitrile rubber seals to optimize grease retention and reduce contamination
    See More

    MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.270)

    Greaseable Super Strength Universal Joint

    from

    $36.99
    Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
    • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    See More

    Neapco – Universal Joint (Part No.1-0298)

    Universal Joint

    from

    $7.89
    Universal Joint
    See More

    Neapco – Universal Joint (Part No.1-0154)

    Universal Joint

    from

    $6.49
    Universal Joint
    See More

    Driveworks – Universal Joint (Part No.DW-371)

    Universal Joint

    from

    $15.99
    DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

    Product Features:
    • The cross is hot forged for the higher torque and horsepower
    • The bearing cups are made by cold forging, having higher strength and better rigidity
    • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
    • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
    • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
    • Snap rings are held to strict tolerances to ensure proper cup position and retention
    • Nitrile rubber seals to optimize grease retention and reduce contamination
    See More

    Driveworks – Universal Joint (Part No.DW-270)

    Universal Joint

    from

    $15.99
    DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

    Product Features:
    • The cross is hot forged for the higher torque and horsepower
    • The bearing cups are made by cold forging, having higher strength and better rigidity
    • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
    • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
    • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
    • Snap rings are held to strict tolerances to ensure proper cup position and retention
    • Nitrile rubber seals to optimize grease retention and reduce contamination
    See More

    Neapco – Universal Joint (Part No.1-0153)

    Universal Joint

    from

    $4.49
    Universal Joint
    See More

    Spicer – Universal Joint (Part No.5-1330X)

    Universal Joint

    from

    $37.99
    You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
    See More

    Spicer – Universal Joint (Part No.5-1204X)

    Universal Joint

    from

    $36.99
    When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
    See More

    Spicer – Universal Joint (Part No.5-7438X)

    Universal Joint

    from

    $46.99
    You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
    See More

    MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.379)

    Greaseable Premium Universal Joint

    from

    $25.99
    Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
    • KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    • Cross forging shape and flash provide easier installation and high strength
    See More

    Spicer – Greasable U-Joint (Part No.K1010991369SPI)

    Greasable U-Joint

    from

    $39.45
    Spicer Drivetrain Products light-duty U-joints feature journal crosses that are manufactured from high-quality alloy forgings and heat-treated for maximum life. The bearing cups are case-hardened for strength and durability, while the seals are crafted from nitrile rubber for optimum grease retention and contaminant exclusion. Ample grease reservoirs in each trunnion assure effective lubrication; they’re pre-filled with high-quality synthetic lithium grease, providing superior friction-reduction and resistance to higher temperatures. These replacement universal joints are available for dozens of positions, as well as greasable and non-greasable styles. Order the model designed for fitment with your vehicle and engine type.

    Product Features:
    • Forged cross
    • Lubeable
    • O.E.M replacement
    • Snap rings
    See More

    Spicer – Universal Joint (Part No.5-1330-1X)

    Universal Joint

    from

    $36.99
    Universal Joint

    Most Popular 1995 Mazda B2300 Drive Shafts and Axles

    Customize your Mazda with 30 Drive Shafts and Axles products like Axle Shaft Seals, Axle Shaft Universal Joints, and Center Support Bearings, all priced under $1,042.99.

    Driveworks – Oil Seal (Part No.S-8660S)

    Oil Seal

    from

    $5.49
    Value-priced seal meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    Spicer – Universal Joint (Part No.5-760X)

    Universal Joint

    from

    $51.99
    When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
    See More

    Spicer – Universal Joint (Part No.5-1310X)

    Universal Joint

    from

    $35.99
    You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
    See More

    Driveworks – Oil Seal (Part No.S-3543)

    Oil Seal

    from

    $4.99
    Value-priced seal meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    National – Multi Purpose Seal (Part No.1990)

    Multi Purpose Seal

    from

    $11.49
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    National – Shaft Repair Sleeve (Part No.99106)

    Shaft Repair Sleeve

    from

    $33.99
    National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    National – Multi Purpose Seal (Part No.710065)

    Multi Purpose Seal

    from

    $18.99
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    National – Bearings (Part No.A-5)

    Bearings

    from

    $16.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Driveworks – Axle Repair Bearing (Part No.S-RP-5707)

    Axle Repair Bearing

    from

    $16.49
    Value-priced bearing meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)

    Center Support Bearing Motor Mount: Center, 1 Piece

    from

    $22.79
    Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

    Product Features:
    • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
    • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
    • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
    • For Years: 1955-2018
    • Weight approx: 3 Lbs
    • BEARING ID / BORE: 1.3780 INCH / 35 MM
    • CENTERLINE: 2.28 INCH / 58 MM
    • MOUNT WIDTH: 6.62 INCH / 168 MM
    • STYLE: ROUND FRAME
    • COMPLETE MOUNT
    See More

    Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6061)

    Center Support Bearing Motor Mount: Center, 1 Piece

    from

    $14.79
    Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to FORD 84-98;. Please verify your application.

    Product Features:
    • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
    • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
    • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
    • For Years: 1984-1998
    • Weight approx: 2 Lbs
    • BEARING ID / BORE: 1.2570 INCH / 32 MM
    • CENTERLINE: 2.00 INCH / 51 MM
    • MOUNT WIDTH: 5.90 INCH / 150 MM
    See More

    Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6062)

    Center Support Bearing Motor Mount: Center, 1 Piece

    from

    $40.49
    Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to FORD 84-98;. Please verify your application.

    Product Features:
    • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
    • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
    • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
    • For Years: 1984-1998
    • Weight approx: 2 Lbs
    • BEARING ID / BORE: 1.1811 INCH / 30 MM
    • CENTERLINE: 2.20 INCH / 56 MM
    • MOUNT WIDTH: 6.00 INCH / 152 MM
    See More

    National – Multi Purpose Bearing (Part No.HBD-206-FF)

    Multi Purpose Bearing

    from

    $76.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Controlled heat treating process for lasting performance and extended bearing life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    National – Shaft Repair Sleeve (Part No.99166)

    Shaft Repair Sleeve

    from

    $34.99
    National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    Dorman – Spindle Nut (Part No.K1002831650DOR)

    Spindle Nut

    from

    $17.26
    Spindle Nut

    Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.986-178)

    Rear Drive Shaft: Greaseable, Adjustable

    from

    $1042.99
    Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

    Product Features:
    • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
    • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
    • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
    • Serviceable construction – non-staked universal joints are designed for future serviceability
    See More

    Dorman – Rear Drive Shaft: Adjustable (Part No.946-742)

    Rear Drive Shaft: Adjustable

    from

    $718.99
    Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

    Product Features:
    • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
    • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
    • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
    • Serviceable construction – non-staked universal joints are designed for future serviceability
    See More

    Dorman – Rear Drive Shaft: Adjustable (Part No.946-758)

    Rear Drive Shaft: Adjustable

    from

    $671.99
    Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

    Product Features:
    • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
    • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
    • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
    • Serviceable construction – non-staked universal joints are designed for future serviceability
    See More

    Dorman – Rear Drive Shaft: Adjustable (Part No.976-311)

    Rear Drive Shaft: Adjustable

    from

    $651.99
    Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

    Product Features:
    • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
    • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
    • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
    • Serviceable construction – non-staked universal joints are designed for future serviceability
    See More

    Dorman – Rear Drive Shaft: Adjustable (Part No.946-759)

    Rear Drive Shaft: Adjustable

    from

    $621.99
    Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

    Product Features:
    • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
    • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
    • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
    • Serviceable construction – non-staked universal joints are designed for future serviceability
    See More

    Dorman – Front Drive Shaft: Greaseable, Adjustable (Part No.938-191)

    Front Drive Shaft: Greaseable, Adjustable

    from

    $303.99
    Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

    Product Features:
    • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
    • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
    • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
    • Serviceable construction – non-staked universal joints are designed for future serviceability
    See More

    FAG US – AXLE SHAFT REPAIR BE (Part No.DR0148K)

    AXLE SHAFT REPAIR BE

    from

    $64.99
    AXLE SHAFT REPAIR BE

    Spicer – Axle Shft Univ Joint (Part No.5-3226X)

    Axle Shft Univ Joint

    from

    $47.99
    Axle Shft Univ Joint

    Spicer – SPICER U-JOINT (Part No.5-1310-1X)

    SPICER U-JOINT

    from

    $44.99
    SPICER U-JOINT

    Driveworks – Drive Shaft Center Support (Part No.S-HBD-206-FF)

    Drive Shaft Center Support

    from

    $36.49
    Product Features:
    • Brand may vary by location
    See More

    FAG US – AXLE BEARING (Part No.FC67147)

    AXLE BEARING

    from

    $36.49
    AXLE BEARING

    Dorman – U-BOLT KIT (Part No.929-763)

    U-BOLT KIT

    from

    $30.99
    The components in this leaf spring axle U-bolt kit are designed to securely hold the leaf spring or leaf spring bundle to the underside of an axle of a vehicle or trailer. Check the leaf spring dimensions and other relevant application details to select the right type and size U-bolt kit for your needs.

    Product Features:
    • Reliable hardware – the components in this leaf spring axle U-bolt kit are designed to securely hold the leaf spring or leaf spring bundle to the underside of a vehicle or trailer axle
    • Check fit – carefully review the dimensions of the leaf springs that will be used and other relevant application details to select the right type and size U-bolt kit for your needs
    • Durable construction – the components in this kit are engineered from quality materials for reliable performance and long service life
    • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
    See More

    Dorman – U-BOLT KIT (Part No.929-764)

    U-BOLT KIT

    from

    $28.99
    The components in this leaf spring axle U-bolt kit are designed to securely hold the leaf spring or leaf spring bundle to the underside of an axle of a vehicle or trailer. Check the leaf spring dimensions and other relevant application details to select the right type and size U-bolt kit for your needs.

    Product Features:
    • Reliable hardware – the components in this leaf spring axle U-bolt kit are designed to securely hold the leaf spring or leaf spring bundle to the underside of a vehicle or trailer axle
    • Check fit – carefully review the dimensions of the leaf springs that will be used and other relevant application details to select the right type and size U-bolt kit for your needs
    • Durable construction – the components in this kit are engineered from quality materials for reliable performance and long service life
    • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
    See More

    Dorman – U-BOLT KIT (Part No.929-761)

    U-BOLT KIT

    from

    $26.99
    The components in this leaf spring axle U-bolt kit are designed to securely hold the leaf spring or leaf spring bundle to the underside of an axle of a vehicle or trailer. Check the leaf spring dimensions and other relevant application details to select the right type and size U-bolt kit for your needs..

    Product Features:
    • Reliable hardware – the components in this leaf spring axle U-bolt kit are designed to securely hold the leaf spring or leaf spring bundle to the underside of a vehicle or trailer axle.
    • Check fit – carefully review the dimensions of the leaf springs that will be used and other relevant application details to select the right type and size U-bolt kit for your needs
    • Durable construction – the components in this kit are engineered from quality materials for reliable performance and long service life
    • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
    See More

    FAG US – SHAFT SEAL (Part No.SS2468)

    SHAFT SEAL

    from

    $5.19
    SHAFT SEAL

    Top Picks for 1995 Mazda B2300 Differentials

    Upgrade Mazda B2300s with top-quality Differentials parts, including 49 OEM and aftermarket selections for your 1995 model.

    Dorman – Differential Cover (Part No.697-710)

    Differential Cover

    from

    $52.99
    This direct replacement differential cover matches the fit and function of the original equipment diff cover for a reliable, leak-free repair. It features a durable design, made to strict specifications, to help ensure reliable service life.

    Product Features:
    • Direct replacement – this differential cover matches the fit and function of the original equipment diff cover on select vehicles.
    • Reliable repair – the smart solution for fixing an existing cover that’s rusted, damaged or leaking differential fluid.
    • Durable construction – this differential cover is made according to strict engineering standards to help ensure dependability
    • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
    See More

    Motive Gear – Differential Pinion Shim Kit (Part No.1100)

    Differential Pinion Shim Kit

    from

    $7.49
    High-quality Differential Component Shim

    Product Features:
    • SHIM KIT FITS-8.25-F7.5-AMC20-GM0
    See More

    Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R7.5FRMK)

    Differential Master Bearing Kit - Koyo

    from

    $112.99
    Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

    Product Features:
    • FORD 7.5″ MASTER BEARING KIT
    See More

    Powertrax – Lock Right Locker (Part No.1830-LR)

    Lock Right Locker

    from

    $444.99
    The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.Powertrax® = Extreme Traction Systems!
    See More

    Dorman – Rear Differential Cover (Part No.697-702)

    Rear Differential Cover

    from

    $34.99
    This direct replacement differential cover matches the fit and function of the original equipment diff cover for a reliable, leak-free repair. It features a durable design, made to strict specifications, to help ensure reliable service life.

    Product Features:
    • Direct replacement – this differential cover matches the fit and function of the original equipment diff cover on select vehicles.
    • Reliable repair – the smart solution for fixing an existing cover that’s rusted, damaged or leaking differential fluid.
    • Durable construction – this differential cover is made according to strict engineering standards to help ensure dependability
    • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
    See More

    National – Bearings (Part No.M802048)

    Bearings

    from

    $23.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Felpro – Differential Cover Gasket (Part No.RDS 55393)

    Differential Cover Gasket

    from

    $6.49
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Motive Gear – Differential Pinion Nut (Part No.379570S)

    Differential Pinion Nut

    from

    $6.49
    All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
    See More

    Motive Gear – Differential Carrier Shim Kit (Part No.1101)

    Differential Carrier Shim Kit

    from

    $8.49
    High-quality Differential Carrier Shim Kit

    Product Features:
    • CARRIER SHIMS 12 BOLT GM CAR & TRUCK ALSO GM8.6″ 99-ON
    See More

    Driveworks – Oil Seal (Part No.S-3604)

    Oil Seal

    from

    $4.79
    Value-priced seal meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    ATP – DIFF COVER KIT (Part No.111103)

    DIFF COVER KIT

    from

    $37.99
    DIFF COVER KIT

    Beck/Arnley – Wheel Bearing (Part No.051-3936)

    Wheel Bearing

    from

    $27.99
    Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

    Product Features:
    • Matches OE form, fit and function
    • ABS magnet included if applicable
    • Made with high quality materials
    • Quality construction for durability
    • Application specific for this vehicle
    See More

    National – Bearings (Part No.M86610)

    Bearings

    from

    $9.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Driveworks – Tapered Roller Bearing (Part No.S-M-802048)

    Tapered Roller Bearing

    from

    $16.99
    Product Features:
    • Brand may vary by location
    See More

    Driveworks – Taper Bearing Cup (Part No.S-LM-501314)

    Taper Bearing Cup

    from

    $7.29
    Value-priced bearing meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    Motive Gear – Ring Gear Bolt (Part No.D5AZ4216A)

    Ring Gear Bolt

    from

    $1.99


    Product Features:
    • Ford 7.5″, 8.8″ Ring Gear Bolt
    See More

    National – Shaft Repair Sleeve (Part No.99155)

    Shaft Repair Sleeve

    from

    $38.49
    National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    Motive Gear – Differential Crush Sleeve (Part No.B7A4662A)

    Differential Crush Sleeve

    from

    $3.29
    All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
    See More

    Driveworks – Tapered Roller Bearing (Part No.S-LM-603011)

    Tapered Roller Bearing

    from

    $6.29
    Product Features:
    • Brand may vary by location
    See More

    Motive Gear – Differential Carrier Gear Kit (Part No.F7.5BI)

    Differential Carrier Gear Kit

    from

    $159.99


    Product Features:
    • INTERNALS FORD 7.5
    See More

    Motive Gear – Axle Shaft (Part No.MG3040)

    Axle Shaft

    from

    $158.99
    The Motive Gear replacement axle shaft offers an OE-quality axle shaft at a fraction of the OE cost. Manufactured from 1541H material on high-tolerance CNC equipment, this axle shaft is designed to provide a perfect fit every time.

    Product Features:
    • AXLE SHAFT – FORD RANGER ’93 -97 8.8″-27 1/4″, 2&4 WD 28 SPL R.H.
    See More

    Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4104)

    Differential Pinion Solid Spacer Kit w/Shims

    from

    $10.49


    Product Features:
    • SOLID SPACER FORD 8.8″ & 9″
    See More

    Driveworks – Tapered Roller Bearing (Part No.S-LM-603012)

    Tapered Roller Bearing

    from

    $6.79
    Product Features:
    • Brand may vary by location
    See More

    Motive Gear – Differential Ring and Pinion (Part No.F7.5-308)

    Differential Ring and Pinion

    from

    $238.99


    Product Features:
    • FRD 10BL 7.5 R/P 3.08 MG
    See More

    Motive Gear – Differential Ring and Pinion (Part No.F7.5-373)

    Differential Ring and Pinion

    from

    $237.99


    Product Features:
    • FRD 10BL 7.5 R/P 3.73 MG
    See More

    Motive Gear – Differential Ring and Pinion (Part No.F7.5-410)

    Differential Ring and Pinion

    from

    $233.99


    Product Features:
    • FRD 10BL 7.5 R/P 4.10 MG
    See More

    National – Multi Purpose Seal (Part No.4244)

    Multi Purpose Seal

    from

    $29.99
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    Sealed Power – Engine Auxiliary Shaft Bearing Set (Part No.1460M)

    Engine Auxiliary Shaft Bearing Set

    from

    $22.99
    Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

    Product Features:
    • Steel-backed Babbitt lining material
    • Used in automotive and high-performance
    • Babbitt is designed to perform under extreme loads w/o damaging other engine parts
    • Babbitt is more environmentally friendly than other material
    • ISO & QS certified manufacturing
    See More

    Yukon Gear – 1541H Alloy 5 Lug Right Hand Rear Axle For (’93-’97 Only) Ford 7.5" And 8.8" Ranger (Part No.21201)

    1541H Alloy 5 Lug Right Hand Rear Axle For ('93-'97 Only) Ford 7.5" And 8.8" Ranger

    from

    $234.99
    Yukon 1541H alloy 5 lug right hand rear axle for (’93-’97 only) Ford 7.5″ and 8.8″ Ranger with a length of 27-5/16″ inches and 28 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a C-clip axle.

    Product Features:
    • Fits 1993-1997 Ford Ranger
    • Right hand side
    • 28 spline
    • 27 5/16″ long
    • 5 lug
    See More

    Motive Gear – Performance Differential Ring and Pinion (Part No.F875456)

    Performance Differential Ring and Pinion

    from

    $209.99


    Product Features:
    • FRD 10BLT 7.5 R/P 4.56 MGP
    See More

    Richmond Gear – RngPnnInstlKt (Part No.83-1045-1)

    RngPnnInstlKt

    from

    $199.99
    RngPnnInstlKt

    Motive Gear – Axle Shaft (Part No.MG3041)

    Axle Shaft

    from

    $141.99
    The Motive Gear replacement axle shaft offers an OE-quality axle shaft at a fraction of the OE cost. Manufactured from 1541H material on high-tolerance CNC equipment, this axle shaft is designed to provide a perfect fit every time.

    Product Features:
    • AXLE SHAFT – FORD RANGER ’93 – 97 8.8″-30 1/8″ 2&4 WD 28 SPL. L.H.
    See More

    Motive Gear – Differential Super Bearing Kit – Koyo (Part No.R7.5FRSK)

    Differential Super Bearing Kit - Koyo

    from

    $113.99
    Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

    Product Features:
    • KIT, SUPER BRG & SEAL-FORD 7.5
    See More

    Motive Gear – Differential Master Bearing Kit – Timken (Part No.R7.5FRMKT)

    Differential Master Bearing Kit - Timken

    from

    $111.99
    Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

    Product Features:
    • FORD 7.5″ MASTER BEARING KIT (TIMKEN)
    See More

    Motive Gear – Differential Bearing Kit – Koyo (Part No.R7.5FR)

    Differential Bearing Kit - Koyo

    from

    $91.99
    Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

    Product Features:
    • FORD 7.5″ BEARING & SEAL KIT
    See More

    Dorman – Differential Cover (Part No.J7019701320DOR)

    Differential Cover

    from

    $74.04
    Differential Cover

    Timken – Pinion Seal (Part No.J7010567944TIM)

    Pinion Seal

    from

    $41.54
    Pinion Seal

    Motive Gear – Differential Gear Install Kit (Part No.F7.5IK)

    Differential Gear Install Kit

    from

    $35.49


    Product Features:
    • MINI INSTALL KIT FORD 7.5
    See More

    Timken – Pinion Seal (Part No.J7010222495TIM)

    Pinion Seal

    from

    $30.59
    Pinion Seal

    SKF – Pinion Seal (Part No.J7010208075SKF)

    Pinion Seal

    from

    $26.01
    Pinion Seal

    Timken – Differential Pinion (Part No.J7020427751TIM)

    Differential Pinion

    from

    $25.53
    Differential Pinion

    Timken – Wheel Bearing (Part No.K80001175562TIM)

    Wheel Bearing

    from

    $24.45
    Timken fuel efficient bearings are used in automotive axles to improve fuel economy, reduce weight, lower operating temperatures, minimize noise and increase reliability. Engineered surfaces help protect bearing components by minimizing skidding and sliding damage while withstanding small-particle contamination.

    Product Features:
    • OE Quality
    • Made from quality Timken certified steel
    • Design features original equipment technology that optimizes bearing performance and lengthens maintenance intervals
    • Design allows bearings to carry evenly distributed loads
    • Power dense design reduces bearing weight
    See More

    FAG US – CONE (Part No.KLM603049)

    CONE

    from

    $23.79
    CONE

    FAG US – TAPERED ROLLER BEARI (Part No.KT5)

    TAPERED ROLLER BEARI

    from

    $16.49
    TAPERED ROLLER BEARI

    FAG US – CUP (Part No.M802011)

    CUP

    from

    $15.29
    CUP

    Timken – Differential Pinion (Part No.J7021374649TIM)

    Differential Pinion

    from

    $12.34
    Differential Pinion

    Autopart International Inc – Differential Pinion (Part No.J70211949937API)

    Differential Pinion

    from

    $8.74
    Differential Pinion

    Driveworks – Tapered Cup Wheel Bearing Assembly (Part No.S-LM-29710)

    Tapered Cup Wheel Bearing Assembly

    from

    $7.49
    Value-priced bearing meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    In-Demand Transfer Cases for 1995 Mazda B2300s

    Select from 16 premium Transfer Cases parts for your 1995 Mazda B2300, with prices ranging from $7.49 to $1,459.99.

    National – Bearings (Part No.M88048)

    Bearings

    from

    $15.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    National – Bearings (Part No.B-2110)

    Bearings

    from

    $17.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Available in both caged design and full complement
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    National – Bearings (Part No.M88010)

    Bearings

    from

    $10.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Dorman – Transfer Case Shift Motor (Part No.600-807)

    Transfer Case Shift Motor

    from

    $118.99
    Transfer case stopped shifting between high and low ranges? Swap out a seized transfer case motor with this direct replacement. Designed to install and perform like the original motor, it uses a factory-style connector and is sealed for protection.

    Product Features:
    • Direct replacement – this transfer case motor fits and performs like the original motor on certain vehicle applications.
    • Durable construction – made with factory-style electrical connector and weathertight seal to prevent corrosion.
    • 100% new – this transfer case motor is entirely new, not remanufactured like competitors
    • Quality assured – vehicle-specific application has been validation tested to ensure quality
    See More

    Driveworks – Needle Bearing (Part No.S-B-2110)

    Needle Bearing

    from

    $7.49
    Value-priced bearing meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    Cardone – Remanufactured Transfer Case Motor (Part No.48-202)

    Remanufactured Transfer Case Motor

    from

    $99.99
    CARDONE Remanufactured Transfer Case Motors are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. Each unit is 100% computer tested at three points during the remanufacturi ng process to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance with our direct-replacement transfer case motors.

    Product Features:
    • All motors are 100% torque tested to ensure strength for proper gear engagement.
    • Each unit is 100% computer tested at 3 points during the remanufacturing process for guaranteed performance.
    • Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
    • Motor magnets are 100% recharged for superior performance and reliability.
    • Transfer case motor sensors are 100% replaced with new, O.E.-quality sensors for superior performance and long product life.
    • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
    See More

    National – Multi Purpose Seal (Part No.710403)

    Multi Purpose Seal

    from

    $10.99
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    Felpro – Transfer Case Adapter Gasket (Part No.55484)

    Transfer Case Adapter Gasket

    from

    $31.49
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific, providing unsurpassed quality for a seal you can trust
    • Validated for fit, form, and function
    • Engineered for the sealing repair environment
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Driveworks – Transfer Case Input Shaft Seal (Part No.S-710403)

    Transfer Case Input Shaft Seal

    from

    $7.49
    Product Features:
    • Brand may vary by location
    See More

    EVO Driveline – Remanufactured Transfer Case (Part No.UMT418)

    Remanufactured Transfer Case

    from

    $1459.99
    Evolution Driveline products, are remanufactured to meet or exceed OEM specifications for quality, fit, and performance. Every transfer case we sell passes a comprehensive battery of tests on our computerized test center. We recreate actual driving conditions and analyze performance before the product even leaves the factory, so you can buy with confidence.

    Product Features:
    • Back Lash, Mesh Load, Leak and Rotational Torque QC testing performed on each unit.
    • OEM cores are processed as individual units throughout the tear down and assembly process
    • Cores cleaned using our Hydro Blast cleaning and rinse process
    • All case halves wet sanded to ensure perfect mating surfaces
    • Loctite gasket eliminator and primer used to seal all aluminum mating surfaces
    • Remanufactured in our ISO9001:2008 USA facility.
    • Without Motor
    See More

    EVO Driveline – Remanufactured Transfer Case (Part No.UMT418M)

    Remanufactured Transfer Case

    from

    $1414.99
    Evolution Driveline products, are remanufactured to meet or exceed OEM specifications for quality, fit, and performance. Every transfer case we sell passes a comprehensive battery of tests on our computerized test center. We recreate actual driving conditions and analyze performance before the product even leaves the factory, so you can buy with confidence.

    Product Features:
    • Back Lash, Mesh Load, Leak and Rotational Torque QC testing performed on each unit.
    • OEM cores are processed as individual units throughout the tear down and assembly process
    • Cores cleaned using our Hydro Blast cleaning and rinse process
    • All case halves wet sanded to ensure perfect mating surfaces
    • Loctite gasket eliminator and primer used to seal all aluminum mating surfaces
    • Remanufactured in our ISO9001:2008 USA facility.
    • Without Motor
    See More

    EVO Driveline – Transfer Case Motor (Part No.UMM4405)

    Transfer Case Motor

    from

    $167.99
    Transfer Case Motor

    USA Standard Gear – TCaseBrg-SealKit (Part No.76891)

    TCaseBrg-SealKit

    from

    $114.99
    TCaseBrg-SealKit

    USA Standard Gear – TCaseBrg-SealKit (Part No.78350)

    TCaseBrg-SealKit

    from

    $104.99
    TCaseBrg-SealKit

    FAG US – BEARING (Part No.6207)

    BEARING

    from

    $15.49
    BEARING

    Autopart International Inc – Trans Case Output Sh (Part No.J71212078340API)

    Trans Case Output Sh

    from

    $11.49
    Trans Case Output Sh

    Most Sold 1995 Mazda B2300 4WD Components

    Explore our best-selling Mazda parts for the 1995 B2300 among 1 OEM and aftermarket options starting from $353.99.

    Milemarker – MileMarker Supreme; Manual Hub (Part No.428)

    MileMarker Supreme; Manual Hub

    from

    $353.99
    Ultimate in style and service. Latest patented technology. Smooth operation. Limited lifetime warranty. 10 spline, 6 bolts. Chrome.

    Product Features:
    • Ultimate In Style And Service
    • Latest Patented Technology
    • Smooth Operation
    • Limited Lifetime Warranty
    See More

    Top-Rated Drivetrains Brands For Your 1995 Mazda B2300

    Shop for the best-rated brands offering Drivetrains and other products for your 1995 Mazda B2300s. Below you’ll find some of our best rated Drivetrains from Spicer, Moog, and Driveworks, and more. Drivetrains from these brands that fit a 1995 B2300 start at just $4.79 and are rated as high as 5 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

    Popular Spicer 1995 Mazda B2300 Drivetrains

    When it comes to maintaining or upgrading your 1995 Mazda B2300, using quality Drivetrains is essential to ensure durability and a perfect fit. Spicer ticks all of those boxes. We offer a wide selection of Spicer Drivetrains, specifically designed for the 1995 Mazda B2300. With over 11 Spicer brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $28.99, with an average price of just $40.76. Plus, with over 26 customer reviews and an average rating of 5 stars, you can trust that our Spicer Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

    Universal Joint
    from
    $37.99
    This product is not rated

    Universal Joint

    “”

    Universal Joint
    from
    $36.99
    This product is not rated

    Universal Joint

    “”

    Universal Joint
    from
    $46.99
    This product is not rated

    Universal Joint

    “”

    Popular Moog 1995 Mazda B2300 Drivetrains

    Moog auto parts is one of the highest quality Drivetrain brands in the market. Any 1995 Mazda B2300 owner should feel confident when installing genuine Moog parts in their vehicle. To ensure the best fit and performance for your 1995 B2300, Advance Auto Parts carries a full inventory of 11 Moog Drivetrains. Plus you will be keeping your Mazda in peak condition while saving money because prices on these Moog Drivetrains range from $8.99 to $59.99, plus, with more than 467 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

    Greaseable Premium Universal Joint
    from
    $25.99
    This product is not rated

    Greaseable Premium Universal Joint

    “”

    Double Cardan CV Ball Kit
    from
    $59.99

    (9)

    Double Cardan CV Ball Kit

    “Fit my truck like a glove just sent her home and it was mint”

    Universal Joint Strap Kit
    from
    $8.99

    (34)

    Universal Joint Strap Kit

    “In stock
    better design”

    FAQs for 1995 Mazda B2300 Drivetrains

    Which Drivetrains are best-sellers for 1995 Mazda B2300s?

    Out of 136 Drivetrains that fit 1995 Mazda B2300s, the following parts are the top sellers:

    What’s the price range for 1995 Mazda B2300 Drivetrains?

    Drivetrain prices for the 1995 Mazda B2300 start at $1.99 and go up to $1,459.99 for the most premium parts.

    What’s the average price of a Drivetrain for a 1995 Mazda B2300?

    The average price for Drivetrains for the 1995 Mazda B2300 is $95.86. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

    Does Advance Auto Parts sell Drivetrains for other Mazda B2300 model years?

    Yes, we currently carry Drivetrains for 11 model years of Mazda B2300s between 1994 and 2009. Drivetrains are bought most frequently for the following model years: 2009, 2008, 2007, 2006, 2005, 2004, 2003, 2002, and 1997.

    What are the cheapest Drivetrains for my 1995 Mazda B2300?

    The cheapest 1995 Mazda B2300 Drivetrains we carry in stock are:

    What are the top-rated Drivetrains that fit the 1995 Mazda B2300?

    Out of 857 reviews by customers, our 1995 Mazda B2300 Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 1995 Mazda B2300 and their top-rated products:

    What types of Drivetrains do you sell for my 1995 Mazda B2300?

    As of 2/5/25, these are some of the most in-demand types of Drivetrains for a 1995 Mazda B2300:

    Can I get help with 1995 Mazda B2300 Drivetrain orders?

    Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mazda Drivetrains and more.

    What is your return policy for Mazda B2300 Drivetrains?

    Advance Auto Parts keeps returns simple. For new Mazda B2300 Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.