from

$74.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Rubber or Thermoplastic material
No Squeak
Complete with bolt ,washers, and nut
Improves body roll

from

$37.99

Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

Hardened ball stud made of OE equivalent or better materials to withstand higher loads
Easy to install.
Construction and design validated by MOOG engineers
Premium forged housing with increased cross section of up to 52% more material in key areas
Broad coverage for foreign and domestic applications
Designed to meet or exceed original equipment performance

from

$46.99

Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

Product Features:

Double lock beading with barbed tube end provides superior hose/coupling integrity
Zinc coated tubes protect against rust and corrosion
Heat/abrasion tubing protects vital areas

from

$34.22

Steering King Pin Bearing

from

$16.89

Burgaflex is a market leader in the field of industrial hydraulics, air conditioning, and aerospace hose and fitting.

Product Features:

Manufactured as a direct OE replacement
Pressure tested to maintain a consistent flow

from

$178.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$35.49

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Restores vehicle handling
Forged steel
Heat treated components
Improves steering response

from

$108.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$57.44

The Original Equipment Idler Arm meets OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. The Original Equipment idler arm is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:

Original Equipment quality
Coated surface to prevent corrosion and rust
Fatigue tested for structural integrity
Precision made components for an ideal fit and function

from

$1.68

Steering Damper Bushing

from

$38.05

Power Steering Reservoir

from

$25.85

Delphi ball joints adhere to global OE technical requirements and undergo testing focused on strength and durability performance, safety critical tests for a safer driving experience. The ball joint push out test measures the force required to push out / remove the ball-pin from the housing. It is an important safety check to help ensure the part can withstand forces applied to the vehicle suspension system in real road conditions. The ball joint pull out test measures the force required to pull the ball-pin out from the housing. If the force required to remove the ball-pin is below the OE spec, there is a risk the joint could fail during normal driving conditions causing the vehicle to lose directional control. Additionally, Delphi’s new dust cover design features an improved Chloroprene Rubber (CR) formula that helps maintain its durability even in extreme temperatures, helping to protect the internal components and support the continued free movement of the ball joint.

Product Features:

One of the industry leading ranges with global application coverage.
Designed, engineered and manufactured to OE quality standards based on more than 100 years of experience in the design and manufacture of OE steering systems.
First To Market parts (for vehicles still covered by manufacturers warranty)

from

$132.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$4.00

Fuel Filter O-Ring

from

$46.99

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$5.22

The Eurospares Panhard Rod Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce vibration and absorb noise.
Resistant to oil and other contaminants.

from

$38.24

Steering Cross Tube

from

$1.78

Swivel Pin Gasket

from

$26.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$10.79

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$2.40

The Eurospare Sway Bar Link Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$5.37

The Eurospare Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$9.00

The Eurospare Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$40.49

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$278.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Restores vehicle handling
Forged steel
Heat treated components
Improves steering response

from

$186.53

Original Equipment tie rod assemblies meet OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. The Original Equipment tie rod assembly is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features: