1995 International 2554 Fuel and Emissions Systems
More 1995 International 2554 Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 1995 International 2554, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 1995 International 2554 Fuel and Emissions Systems
Carquest Premium – Fuel/Water Separator Spin-on with Drain (Part No.86406)
from
$41.99
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Application engineered media which aids in stripping water in diesel fuels
- Patent pending drain, metal end caps, which hold media in place
- Rust resistant can, ensuring no leakage from inside
- Made in USA
- Includes Standpipe
- CAUTION: Furnished D-Ring must be installed on post for seal.
Carquest Premium – Fuel/Water Separator Spin-on with Open Port for Bowl (Part No.86232)
from
$77.99
Carquest spin-on fuel filters with open ends for bowls keep fuel clean and engines running at maximum efficiency. These filters feature a port designed to be used with the OE bowl.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Includes Port Thread: 3-12
Cardone – Injection Pressure Regulating Valve (Part No.2V-230)
from
$438.99
CARDONE Remanufactured Fuel Injection Regulating Valves control the pressure in the high pressure oil system which operates your injectors. Vehicle conditions such as poor idle, stalling, and no-start are some of the correctible symptoms. Each individual unit is completely disassembled and undergoes quality testing to ensure proper operating parameters to meet or exceed OEM performance.
Product Features:
See More
Product Features:
- Built and 100% tested to perform like the original, with all standard wear items replaced
- Air decay tested to ensure on-car performance
- Designed for easy installation and setup
- Guaranteed fit and function
- Meets or exceeds O.E.M. performance
Carquest – Fuel Injection Pressure Regulator (Part No.23076)
from
$244.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Application-specific to ensure the proper fit and form
- Precision-engineered pressure regulators for proper fuel delivery and engine performance
- As a global manufacturer, we have complete control of the manufacturing process, from components to finished product?
Cardone – Injection Pressure Regulating Valve (Part No.2V-231)
from
$427.99
CARDONE Remanufactured Fuel Injection Regulating Valves control the pressure in the high pressure oil system which operates your injectors. Vehicle conditions such as poor idle, stalling, and no-start are some of the correctible symptoms. Each individual unit is completely disassembled and undergoes quality testing to ensure proper operating parameters to meet or exceed OEM performance.
Product Features:
See More
Product Features:
- Built and 100% tested to perform like the original, with all standard wear items replaced
- Air decay tested to ensure on-car performance
- Designed for easy installation and setup
- Guaranteed fit and function
- Meets or exceeds O.E.M. performance
Carquest Premium – Injection Pressure Regulator (IPR) Valve (Part No.AC20082)
from
$232.99
Injection control pressure determines fuel injection quantity under varying engine operating conditions. Improper injection quantity can result in poor engine performance or a no-start condition. New IPR valve is manufactured to meet or exceed original equipment performance specifications to ensure precise control of injection oil pressure.
Product Features:
See More
Product Features:
- Original equipment fit, form and function
- Manufactured to precise OE performance specifications
Delphi – Fuel Injector (Part No.EX631763)
from
$439.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Cardone – Fuel Injector (Part No.2J-404)
from
$421.99
CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.
Product Features:
See More
Product Features:
- All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
- Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
- All components are renewed or replaced as necessary to ensure high quality and durability
- When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
- Guaranteed fit and function
- Meets or exceeds O.E.M. performance
Cardone – Fuel Injector (Part No.2J-405)
from
$442.99
CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.
Product Features:
See More
Product Features:
- All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
- Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
- All components are renewed or replaced as necessary to ensure high quality and durability
- When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
- Guaranteed fit and function
- Meets or exceeds O.E.M. performance
Carquest Premium – Remanufactured Diesel Fuel Injector (Part No.AD85011)
from
$292.99
CARQUEST premium remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes 100% new nozzle to ensure precise fuel delivery under all operating parameters
- Includes 100% replacement of solenoid to ensure precise fuel injection timing
- Includes 100% replacement of plunger and barrel to improve longevity over competitive units
- Includes all new premium quality O-rings and seals
- Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation
Cardone – Fuel Injector (Part No.2J-403)
from
$442.99
CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.
Product Features:
See More
Product Features:
- All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
- Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
- All components are renewed or replaced as necessary to ensure high quality and durability
- When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
- Guaranteed fit and function
- Meets or exceeds O.E.M. performance
Delphi – Fuel Injector (Part No.EX63808BB)
from
$353.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Cardone – Fuel Injector (Part No.2J-402)
from
$379.99
CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.
Product Features:
See More
Product Features:
- All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
- Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
- All components are renewed or replaced as necessary to ensure high quality and durability
- When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
- Guaranteed fit and function
- Meets or exceeds O.E.M. performance
Delphi – Fuel Injector (Part No.EX63812BF)
from
$353.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Cardone – Fuel Injector (Part No.2J-407)
from
$355.99
CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.
Product Features:
See More
Product Features:
- All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
- Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
- All components are renewed or replaced as necessary to ensure high quality and durability
- When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
- Guaranteed fit and function
- Meets or exceeds O.E.M. performance
Cardone – Fuel Injector (Part No.2J-406)
from
$314.99
CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.
Product Features:
See More
Product Features:
- All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
- Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
- All components are renewed or replaced as necessary to ensure high quality and durability
- When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
- Guaranteed fit and function
- Meets or exceeds O.E.M. performance
Cardone – Fuel Injector (Part No.2J-410)
from
$355.99
CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.
Product Features:
See More
Product Features:
- All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
- Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
- All components are renewed or replaced as necessary to ensure high quality and durability
- When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
- Guaranteed fit and function
- Meets or exceeds O.E.M. performance
Dorman – HD Solutions – Fuel Pump Repair Kit (Part No.285-5102)
from
$93.99
This diesel high pressure oil pump fitting kit is designed to match the original components required to repair the HPOP on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this diesel high pressure oil pump fitting kit is designed to match the original components required to repair the HPOP on specified vehicles
- Ideal solution – this HPOP kit is a reliable replacement for original components that are leaking or have failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Popular 1995 International 2554 Fuel and Emissions Systems Categories
1995 International 2554 Fuel and Emissions Systems
You count on your 1995 International 2554 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 8 Fuel and Emissions Systems ranging in price from $77.99 to $438.99, you’re sure to find everything you need for your 1995 International 2554.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 4 different brands like Carquest Premium, Dorman, and Cardone. 1995 International 2554 Fuel and Emissions Systems start as low as $77.99!
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1995 International 2554 below to get started!
FAQs for 1995 International 2554 Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 1995 International 2554?
Out of 8 Fuel and Emissions Systems for the 1995 International 2554, the most popular in our inventory are:
from
$77.99
This product is not rated
Fuel/Water Separator Spin-on with Open Port for Bowl
Fuel and Water Separators
