1995 GMC G3500 Performance and Racing Products

Name: Mr. Gasket Ultra Seal: Valve Cover Gasket Set, 5862
Brand: Mr. Gasket
SKU: 5862
Price: 44.39 USD

Below you will find various in-demand GMC Performance and Racing Products, components and accessories for your 1995 G3500. Advance Auto Parts has popular G3500 parts like Performance Exhaust Products, Performance Distributors, Performance Ignition Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other G3500 model years including 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1996 and more. Select a category of 1995 GMC G3500 Performance and Racing Products below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1995 GMC G3500 Performance and Racing Products Categories

Performance Oil Filters

Performance Starters

Performance Intake Manifolds

Performance Coils

Performance Distributor Cap and Rotor Kits

Performance Shifters

Performance Distributors

Performance Valve Covers

Performance Engine Dress-Up Kits

Performance Engine and Transmission Mounts

Performance Engine Water Pumps

Performance Radiator Caps

Performance Engine Cylinder Head Gaskets

Performance Engine Camshaft and Lifter Kits

Performance Distributor Rotors

Performance Distributor Components

Performance Engine Intake Manifold Gaskets

Performance Engine Timing Sets and Components

Performance Engine Valve Springs

Performance Engine Valve Cover Gasket Sets

Performance Spark Plug Wires

Performance Flywheel and Flexplates

Performance Exhaust Manifold Gaskets

Performance Timing Covers and Tabs

Performance Camshaft and Lifter Kits

Performance Ignition Kits

Performance Valve Cover Hardware

Performance Engine Rocker Arms

Performance Universal Joints

Performance Engine Camshafts

Performance Engine Oil Pan Gaskets

Performance Ring and Pinions

Performance Ignition Parts

Performance Intake Manifold Hardware

Performance Engine Valve Lifters

Performance Engine Main Bearing Gasket Sets

Performance Transmission Shift Kits

Performance Oil Filler Caps

Performance Engine Timing Cover Gasket Sets

Performance Engine Push Rods

Nitrous Oxide Injection System Kit

Performance Torque Converters

Performance Engine Cylinder Heads

Performance Ignition Systems

Performance Nitrous Systems

Specialty and Racing Shifters

Performance Engine Valve Stem Seal Sets

Performance Engine Valve Lock

Essential Performance and Racing Products for 1995 GMC G3500s

Mr. Gasket Ultra Seal: Valve Cover Gasket Set, 5862

from

$44.39

These are high quality gaskets that works well on those hard to seal applications. The low density fiber & rubber blend gasket material seals those minor head imperfections with a low clamp force. At .187 inch, the extra thickness can also offer slightly more clearance for roller rockers. Ideal for all those high performance applications where you take the valve covers off and on a lot, and sticking is a problem.brbrFits all 1965-2000 Chevy Big Blocks: 366,396,402,427,454 including GM (General Motors) Gen VI Crate Engines like the 502 and 572.

MSD Ignition Distributor, Billet, Gm Hei, 8365

from

$675.99

Note: The PN 8365 is designed to replace GM HEI Distributors that use a 4-pin ignition module.

from

$584.99

The Tork Master 3000 fits 1965-91 GM TH400, 425, 375 and 1968-81 GM TH350, 375B (not 350C) transmissions. Don’t let the exceptional value fool you into thinking Tork Master Converters are not packed with lots of quality features, making them the best value-priced street performance converters money can buy. These converters perform best when paired with stock to modified engines up to 350hp/350 ft lbs of torque, and lighter weight applications, like street rods. The Tork Master will provide noticeably quicker launches and harder acceleration while maintaining normal daily driving qualities. Upgrades like a new precision alloy steel pump drive tube, needle thrust bearing when factory equipped, new thrust washer between turbine and cover when required, and pressure tested and fully balanced by expertly trained technicians. Notes: Higher stall converters can generate more heat, so we highly recommend adding a transmission cooler. Not recommended for big block, supercharged, plate-type nitrous oxide or trans-brake applications. The product images shown are for illustration purposes only and may not be an exact representation of the product. 10.75-inch bolt circle

Mr. Gasket Ultra Seal: Exhaust Gasket Set, 5912

from

$46.99

Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

Accel Distributor Cap & Rotor Kit - HEI Style - Tan - 1972-1986 Various GM - Clamp Down Cap, 8122

from

$49.99

“ACCEL cap and rotor kits offer superior protection from “”arc-thru”” and crossfire. Features 60k V-rated alkyd compound, stress-relieved at molding to ensure stability. Brass inserts and steel rotor springs provide for high spark energy flow.”

"MSD Ignition Crank Trigger Kit, Small Block Chevy, 6"" Balancer, 8600"

from

$519.99

For a long time, racers have known that one of the best things to do to an engine to improve performance is to stabilize the ignition timing. The MSD Flying Magnet Crank Trigger system does exactly that by using four magnets embedded in an aluminum wheel. Although similar in appearance to other crank triggers, the MSD Flying Magnet design works on a different principle. Most crank triggers have a wheel, with steel studs sticking out, bolted to the harmonic balancer. As the crankshaft turns, the studs pass by a stationary magnetic pick-up, triggering the ignition. This pick-up can be triggered by other bolts, debris, or even vibrations which will cause a loss of power or engine damage.

NOS/Nitrous Oxide Systems Nitrous Systems-Performance, 02519NOS

from

$1117.99

If you think the torque of that monster diesel is something to brag about then you should feel it with the extra power of NOS. This kit works with stock and modified applications. Vehicles with computer upgrades will benefit even more as nitrous will aid in a clean combustion. Comes complete with 10 lb. bottle, bottle brackets, nitrous feed line, large nitrous solenoid, electrical wiring and complete instructions.

Edelbrock Engine Water Pump Gasket Set, 7251

from

$14.99

Edelbrock No: 7251 Engine Water Pump Gasket Set Chevy Small Block. Is it time to rebuild your Edelbrock mechanical water pump- No problem- these Edelbrock water pump gaskets will keep your water pump leak-free. They are manufactured from quality materials and can be installed easily without any modifications

K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-2002

from

$17.99

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N Limited Warranty.

B & M Automatic Shifter - Pro Ratchet - Universal, 80842

from

$460.99

“Track-favorite simplicity with bulletproof execution: the Pro Ratchet self-centers after each shift, won’t over-shift, and integrates a one-hand reverse lockout meeting NHRA/IHRA rules. It adds a brushed cover, classic white knob, neutral safety and backup-light switches, gear indicator, 5-ft Super-Duty cable, brackets, levers, and hardware for most Chrysler, Ford, and GM 3-/4-speeds (install kits may be required). Overall: 10.75″” L x 2.9″” W x 9.25″” H.”

Mr. Gasket Chrome Valve Covers - Finned, 9415

from

$129.99

Chrome plated steel valve covers with original equipment height and internal baffle. Features one breather/oil fill cap opening per valve cover. Sold as a pair. Hardware and gaskets sold separately.

"Competition Cams Valve Springs, 1.250"" Single 1 St, 981-16"

from

$111.99

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. Selecting the right metal stock and creating the best design is not done by chance. COMP Cams has developed a process that creates the highest quality valve spring available. The result is a product that meets and exceeds the expectations of today’s engine builders and racers.

MSD Ignition Harness, Msd 6 To Gm Dual-Connector Coil, 8876

from

$81.99

The harnesses plug directly into your factory coil and harness then four color coded wires plug into the corresponding wires of the MSD.

Edelbrock Side-Mount Throttle Linkage, 7077

from

$236.99

The Edelbrock No: 7077 Throttle linkage kit No: 7077 is for big block Chevy Tunnel Ram Top No: 7079 with sideways mounted 4500 series carburetors.

Edelbrock Performer-Link Adjustable True-Roller Timing Chain Set, 7810

from

$78.99

Edelbrock part No: 7810 Performer-Link timing chain is for use with Edelbrock or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. Cam sprockets are made from 35,000 psi tensile strength cast iron. Crank sprockets are made from billet SAE-1144 steel and induction heat treated. Four Performer-Link sets are stock replacement parts and 50-state legal (see listings in bold type). All other sets have three keyway setting points to ensure accurate timing selection for early or late-model vehicles. Performer-Link timing sets are not for use above 6500 rpm. Performer roller chain sets are engineered to operate up to 6500 rpm. Never hammer directly on chain or sprockets. You can crack the hardened links and pins and cause early failures. Use a sleeve for installations that require hammering, a brass drift punch may be used if you carefully alternate blows on either side of the sprocket to avoid cocking. Never stretch the chain with a screwdriver. Check for clearance between the timing chain and block and between the chain and front cover before reassembly. Be sure that both cam and crank sprockets are exactly in line with each other. Misalignment can cause chain to break.

MSD Ignition Ignition Coil, Gm, External Single-Connector, 1996-1997, 8231

from

$89.19

The MSD 8231 Blaster OEM Replacement Ignition Coil is a premium, high-voltage upgrade engineered by MSD Performance to deliver superior spark energy, improved throttle response, and smooth power delivery for late-model GM vehicles.

"Competition Cams SUPER VALVE LOCKS, 3/8"" 1 ST, 612-16"

from

$43.99

Inside tang-to-taper relationship held tightly for repeatable valve spring installed heights

Mr. Gasket Chrome Valve Cover Wing Bolts, 9824

from

$19.59

Chrome-plated for beauty and durability, wing bolts make valve cover removal fast & easy. They are precision-engineered and feature extra-long threads to accommodate Mr. Gasket re-usable valve cover gasket & custom valve covers.

from

$29.39

This Mr. Gasket Rear Main Seal is made from silicone to allow the seal to handle extreme engine oil temperature. It also provides for an upgrade for that leaky rope style seal and is a direct replacement for a rubber main seal. It’s also injection molded for a precise fit.

from

$46.99

Mr. Gasket Timing Cover Kit is the finishing touch to dressing up your engine. This kit is for use with original equipment style timing chains only. Double roller type chains or gear drives require checking for adequate clearance. This kit includes everything you need, including the timing cover, bolts, front oil pan seal, front seal and water pump gaskets.

Edelbrock Pushrod Set for Small-Block Chevy V-8 Engine Applications, 9630

from

$209.99

“Edelbrock part No: 9630 Pushrods are designed for small-block Chevy V-8 engine applications. These one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum durability. They have precise formed wedged ends for a high quality fit with the cup seats. A black oxide finish is added for corrosion resistance. Pushrod Specifications: – Outside Diameter: 5/16″” – Length: 7.8″” – Stock length”

Mr. Gasket Chrome Oil Fill Cap - Push-On Style W/Tube For Pvc Hookup - Fitting For Easy Pcv Hose Hook Up, 2063

from

$13.79

This chrome-plated steel push-on breather/oil filler cap fits over your oil filler tube. It has a side fitting for easy PCV hose (positive crankcase ventilation) hook up. Perfect compliment to Mr. Gasket matching chrome oil filler tube, #2066

Energy Suspension Motor And Transmission Mount, 3.1130R

from

$116.99

Energy Suspension continues to be the World leader in performance polyurethane suspension technology. Dedication to manufacturing and developing superior products has established Energy Suspension as the most asked-for name in performance polyurethane components today. The complex and diverse nature of Energy’s proprietary Hyper-Flex material requires constant attention to developing the optimum polyurethane formulas. This devotion has produced the quality components that our customers continue to demand. Providing problem-solving solutions with applications for the most popular vehicles, paired with our Limited warranty and superb customer support, Energy Suspension is your first quality choice in performance polyurethane suspension components.

Top Street Performance Chevy V8 3HP High Torque Chrome Tilton Style Starter, JM7001C

from

$189.99

TSP Starters guarantee reliable starting power. After all, what?s the point of a high performance engine if it doesn?t start? These reliable high torque starters feature a compact design for added clearance to fit most engine configurations. They are available in multiple styles and finishes.

Competition Cams Mutha' Thumpr 235/249 Hydraulic Flat Cam and Lifter Kit, CL12-601-4

from

$397.99

SMALL BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Mutha’ Thumpr: High performance street/strip, needs 9:1 compression, 2500+ stall, intake, gears and headers, rough idle.

from

$10.99

Spectre’s Intake Bolt and Washer Set is engineered to provide premium quality hardware for Chevrolet 265-400 and Chrysler 273-440 small block engines. Measuring 3/8 inch-16 by 1 inch, these grade 5 bolts feature a corrosion resistant zinc-plated finish and hex heads to ensure easy installation. This kit includes 12 bolts and washers.

from

$109.99

The new design of the B&M Shift Plus Electronic Shift Improver allows you to improve the transmission’s shifting performance without removing the transmission pan or valve body. A simple flip of the switch allows the transmission to operate in the performance mode. Flip it back and you are back to stock! Installs in just minutes, the Shift Plus simply recalibrates your transmission’s hydraulic system electronically for optimum performance and extended life! Select the mode that best suits your application. Reduces slippage and heat! 50 state emissions legal. The Shift Plus shift firmness not only makes driving more fun and pleasurable, but slippage and heat are reduced, extending the life of your transmission!

Mr. Gasket Thermocap Radiator Cap, 2470R

from

$58.99

The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Upgrade your 1995 GMC G3500 with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1995 GMC G3500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Performance and Racing Products are key to keeping your G3500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 213 Performance and Racing Products for the 1995 GMC G3500, designed to meet your needs without breaking the bank. From Performance Exhaust Product replacements to Performance Distributors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1995 GMC G3500 at great prices. Our Performance and Racing Products inventory for this model ranges from just $10.69 to $1,623.99, with an average price of $316.52. Our 213 Performance and Racing Products in stock come from 22 trusted brands, so you’re sure to find the right part for your 1995 GMC G3500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1995 GMC G3500, we stock popular OEM and aftermarket Performance and Racing Products from top names like MSD Ignition, B & M, FEL-PRO Performance, and more. MSD Ignition Performance and Racing Products start at just $81.99 and boast an impressive 4.3 stars average rating from customers. B & M and FEL-PRO Performance also bring quality to the table, with Performance and Racing Products available starting at $32.99, and at an average 4.3 stars rating. With 2,591 customer reviews and counting, our 1995 GMC G3500 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1995 GMC G3500 is always ready to roll. We’re committed to providing you with everything you need to keep your G3500 in top shape, all in one place. Start shopping confidently below for your 1995 GMC G3500!

Best-Selling Performance Exhaust Products for 1995 GMC G3500s

Enhance the driving experience in your GMC with 18 quality Performance Exhaust Product components, starting at $21.39.

show more show less

FEL-PRO Performance Perforated steel core w/anti-stick coating Exhaust Manifold Gasket Set, 1444

from

$32.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Mr. Gasket Performance Exhaust Gasket Set For Enhanced Sealing And Durability, 150B

from

$25.49

Mr. Gasket Performance exhaust gasket material is a heavy duty material, .062 inch thick, consisting of an acrylic binder system to resist high temperature. This material is made for sealing exhaust applications. Provides excellent sealing and durability.

from

$44.39

Mr. Gasket Performance Header Gaskets are manufactured from a heavy duty high-temperature material, .062 inch thick, consisting of an acrylic binder system to resist high temperature. Provides excellent sealing and durability with maximum torque retention to eliminate gasket failure. While precision die-cut for an excellent fit, it can be trimmed if necessary for modified port applications. For original equipment replacement, higher performance street, drag race and oval track use. Fits Chevrolet 396,402,427,454 Gen IV Big Blocks with Round Ports up to 1.85 x 1.90 inches.

Mr. Gasket Aluminum Exhaust Gaskets For Intense Heat Resistance, 7402G

from

$51.99

Upgrade to Mr. Gasket Aluminum Layered Header Gaskets and eliminate blown exhaust gaskets forever. They conform to warped and damaged surfaces to create an airtight, leak-proof seal and will not shrink or deteriorate EVER.

Mr. Gasket Exhaust Gasket: High-Temperature Protection, Durability, And Reliable Sealing, 150A

from

$33.59

Hooker Headers Hi-Temperature Material, Square Ports, 10808HKR

from

$27.29

“Hooker’s precision-matched Super Competition header gaskets provide a sure fit and unmatched exhaust sealing. This OEM quality gasket is constructed of a thick (.060″”) high temperature, synthetic hi-temperature gasket material with a perforated steel core, which provides a superior grip and adhesion. This construction also contributes to exact fit compliance between the cylinder head and header flange, offering excellent sealing properties during extreme temperature and operating conditions.”

FEL-PRO Performance Perforated Steel Core with Anti-Stick Coating Exhaust Manifold Gasket Set, 1411

from

$42.99

FEL-PRO Performance Perforated steel core w/anti-stick coating Exhaust Manifold Gasket Set, 1410

from

$37.99

FEL-PRO Performance PERFORMANCE EXHAUST MANIFOLD GASKET SET, 1402

from

$28.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Mr. Gasket Ultra Seal: Exhaust Gasket Set, 5907

from

$37.99

from

$21.39

Flowtech Gaskets, 99161FLT. PERFORMANCE PARTS>PERFORMANCE EXHAUST>EXHAUST SYSTEMS>EXHAUST ACCESSORIES & OTHER from Flowtech

Flowtech Header Gaskets - Aluminum-Layered, 99150FLT

from

$99.99

“gasket will not because the “”Dead Soft”” aluminum conforms to create a leak-proof seal. REAL-SEALS can also be easily trimmed for port-matching and”

"Mr. Gasket Ultra-Seal Exhaust Gaskets - Hi-Temp Graphite - Small Block Chevy Oval Port - 1.50""W X 1.82""H, 5917"

from

$51.99

from

$99.99

you can use them over and over again.

Mr. Gasket Ultra Seal: Exhaust Gasket Set, 5908

from

$56.29

Mr. Gasket Exhaust Manifold Gasket -Performance, 5906

from

$54.99

"Mr. Gasket Exhaust Gaskets - Standard Duty - Small Block Chevy Square Port, 1.45""W X 1.48""H - Reusable, 150C"

from

$44.39

Edelbrock Exhaust Manifold Gasket Set for Chevrolet, Provides high heat resistance, 7205

from

$33.99

Edelbrock part No: 7205 Exhaust Gaskets are designed for 1965-90 Big-Block Chevy Mark IV, 396-402-427-454 V8 engines. These Exhaust Gaskets are made of EnCore HTX-900

Most Popular 1995 GMC G3500 Performance Distributors

Customize your GMC with 15 Performance Distributors products like Performance Distributor Cap and Rotor Kits, Performance Distributor Rotors, and Performance Distributors, all priced under $779.99.

show more show less

MSD Ignition Distributor, Chevy V8, Pro-Billet, With Cap And Rotor, 85551

from

$399.99

Different springs and stop bushings are supplied so you can tune an advance curve to match your application.

Accel Truck Super Tune Up Kit for GM Truck with V8 Throttle Body Engines with, TST4HP

from

$278.99

Everything you need to Super Tune Up your truck, van, or Jeep engine! The kits includes a high performance cap and rotor. A set of 8mm Extreme 9000 Spiral Core wires. This kit also includes the ACCEL classic copper core spark plugs to fire your engine up.

Accel Distributor Cap & Rotor Kit - HEI Style - Tan - 1987-1993 Various GM - Screw Down Cap, 8132

from

$55.19

“High-performance 60kV-rated tan alkyd molding compound (mineral-filled polyester for late model Ford & GM parts) is used for superior protection from “”arc-thru”” and crossfire. Compression-molded caps are stress-relieved immediately after molding in special fixtures to ensure dimensional stability.”

Accel Distributor Rotor - GM - 4.3 / 5.0 / 5.7 / 7.4L - Stainless Steel - 130141, Distributor Rotor, Stock Replacement, Each

from

$34.19

ACCEL Hi-Performance rotors offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability and resist centrifugal forces at high racing RPMs.

Accel Distributor Cap - Chevy / GMC Vortec - V8 - Female - Socket Style - Crab - Black - 120141 distributor cap is a black, socket style heavy duty...

from

$105.99

ACCEL Heavy-Duty Caps offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability.

Accel Truck Super Tune Up Kit for GM Truck with V8 Throttle Body Engines - Tune up kit for 1987-95 GM Truck and Van with 5.0L V8 TBI Engine. Also i...

from

$265.99

"MSD Ignition Distributor Gear, Chevy Distributor, 0.500"" Id, Iron, 8531"

from

$62.99

MSD Ignition has put a great deal of effort into researching and testing a variety of metallurgical compositions, heat treating and coatings to provide you with a durable, accurate and strong distributor gear. MSD engineers have built test fixtures and spent hundreds of hours testing and evaluating the metallurgy of our gears. The result is a special iron alloy gear that is treated to a low-friction coating process. To you this means long life, an easy break-in period and reliable performance.

MSD Ignition Rotor - Extreme Output, Gm Hei, 84101

from

$35.09

The MSD 84101 Extreme Output GM HEI Distributor Rotor is a premium, high-voltage replacement component engineered by MSD Performance to withstand the punishing demands of high-output modules and maximum racing RPMs.

MSD Ignition Distributor, Chevy V8, Billet, With Vacuum Advance, 8361

from

$467.99

The Street Pro-Billet is a popular route for people looking for proven race performance for their street cars. A vacuum advance canister provides economy and the proven MSD mechanical advance gives you the opportunity to dial-in a timing curve to fit your needs. Inside, an oversized steel shaft is QPQ-coated for low friction and rides in a sealed ball bearing at the top of the distributor with an extra-long sintered bushing at the bottom. This combination keeps the shaft steady creating accurate spark delivery at any rpm.

from

$675.99

Note: The PN 8365 is designed to replace GM HEI Distributors that use a 4-pin ignition module.

MSD Ignition Distributor, Digital E-Curve, 8394

from

$779.99

The Digital E-Curve Distributor will drop right in your engine, easily connect to the coil and fire up. There are no external controls or boxes to mount and connect, and you can set a timing curve with the twist of a rotary dial.

MSD Ignition Distributor, Chevy V8, Pro-Billet, Locked, Cap And Rotor, 85501

from

$499.99

This strong, billet aluminum distributor is set up for engines that run locked-out timing or an MSD Timing Computer. With no advance assembly, the rotor plate is welded directly to the oversized shaft. A sealed ball bearing guides the top of the shaft while an extra long sintered bushing stabilizes the lower portion.

MSD Ignition Distributor, Chevy V8, With Slip Collar, Cap And Rotor, 85561

from

$399.99

The distributor shares the same features of the standard Pro-Billet Chevrolet model including a ball bearing guide, long sintered lower bushing and an oil seal. To trigger the MSD Ignition a maintenance-free magnetic pick-up is secured in the billet base of the distributor. Just above this pick-up assembly is an adjustable mechanical advance assembly.

Top Street Performance Chevy Small Block (262-400)/Big Block (396-454) V8 All-Black HEI Distributor, JM6501ABK

from

$111.99

TSP HEI Distributor has everything you need, all under one cap. With a high-quality aluminum housing and hardened steel dual bushing construction, it is built to last. It features fully adjustable mechanical and vacuum advances, meaning precision is a breeze. It has a high-output module, high-spark 65,000 volt coil, solid brass terminals, and an easy one-wire hookup.

"Proform HEI Distributor Steel Gear, Fits Chevy Small & Big Block V8 Engines w/ 0.491"" Shaft, 66961C"

from

$30.99

“Fits Chevy small block and big block engines with 0.491″” shaft. Replacement component.”

Top Picks for 1995 GMC G3500 Performance Ignition Products

Upgrade GMC G3500s with top-quality Performance Ignition Products parts, including 12 OEM and aftermarket selections for your 1995 model.

show more show less

from

$81.99

The harnesses plug directly into your factory coil and harness then four color coded wires plug into the corresponding wires of the MSD.

from

$99.99

Requires a 1.4 ohms Ballast resistor, Loom resistor or internally resisted coil.

MSD Ignition Ignition Coil, Gm External Hei, High Performance, 8226

from

$82.99

Top off your GM Ignition system with these great new replacement coils. The GM Coils have MSD performance in factory-style housings. MSD designed these Coils by combining our Blaster Coil experience with E-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The Coils will work with stock ignition systems as well as MSD equipped cars and trucks.

MSD Ignition Ignition Coil, Direct-Fit Replacement, High Energy Output, Easy Installation, 5526

from

$74.99

GM Dual connector coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.

PerTronix 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red

from

$91.99

Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.

MSD Ignition Wire Set - Super Conductor, Chevy Truck 305-350, 1985-On, 31419

from

$173.99

“Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire, incredibly low resistance without electronic interference. In a single 12 inch length of Super Conductor Wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) “”choke””. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD’s 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps, one for the sleeve of the wire and another separate crimp to grasp the conductor. The MSD’s 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps, one for the sleeve of the wire and another separate crimp to grasp the conductor.”

MSD Ignition Wire Set - Super Conductor, Big-Block Chevy Pickup, Efi, Sc, 1990-1997, 32119

from

$190.99

“Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of Super Conductor Wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) “”choke””. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD’s 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor. The MSD’s 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor.”

Mallory Distributor Wiring Harness, 29349

from

$35.49

3-wire for ignition box. PERFORMANCE PARTS>PERFORMANCE IGNITION/STARTING/CHARGING>IGNITION>IGNITION ACCESSORIES & OTHER from Mallory

MSD Ignition Hei Kit With Digital Ignition, Coil, Hei Adapter, And 8.5 Mm Coil Wire, 85001

from

$584.99

The kit allows you to remove or bypass the low-powered HEI module and coil and replace them with the MSD Digital 6AL Ignition Control and the Blaster SS high output coil. The result is more power, increased rpm range, easier starting, plus better mileage and performance. The Kit includes the new MSD Digital 6AL Ignition, Blaster SS Coil, coil wire and HEI dust cover . The 6AL has a Soft Touch Rev Control to protect your engine from overrev damage.

from

$519.99

MSD Ignition Wire Set - Super Conductor, Big-Block Chevy With Pn 8541 Crab Cap, 30829

from

$218.99

This combination is encased in a heavy duty sleeve that will withstand abrasion and high temperatures. Cap off each end with our Dual Crimp Terminals and you have the best wire available.

Mallory Promaster Classic Series Ignition Coil, 29440

from

$204.99

The Mallory Promaster Classic series ignition coil is designed to meet today’s specialized ignition requirements. This coil features a faster rise time and increased spark duration (compared to stock) to increase performance. It has a glass-filled polyester case and oil-filled construction to ensure a long life and no energy loss from arcing. This coil also offers excellent wire retention with a spark plug type secondary post, and brass contact terminals.

In-Demand Performance Oil Filters for 1995 GMC G3500s

Select from 3 premium Performance Oil Filters parts for your 1995 GMC G3500, with prices ranging from $13.79 to $18.99.

show more show less

K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-2001

from

$17.99

K&N Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine, HP-3002

from

$18.99

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

from

$13.79

Most Sold 1995 GMC G3500 Performance Engines

Explore our best-selling GMC parts for the 1995 G3500 among 134 OEM and aftermarket options starting from $10.99.

show more show less

FEL-PRO Performance Steel core laminate Engine Cylinder Head Gasket, 1003

from

$42.49

FEL-PRO Performance Steel core laminate Engine Cylinder Head Gasket, 1004

from

$44.99

FEL-PRO Performance Stainless steel core laminate Engine Cylinder Head Gasket, 1037

from

$64.99

FEL-PRO Performance Engine Valve Cover Gasket Set, 1603

from

$31.99

Edelbrock Performer Intake Manifold for 1987-95 Small Block Chevy, Satin Finish, 2104

from

$346.99

Edelbrock part #2104 Performer intake manifold is designed for street 262-400 c.i.d. Chevy V8’s that have heads with canted center bolt holes, 1987-1995. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response. The Performer intake manifolds are ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs. For 1987-95 stock aluminum heads use #2101.

FEL-PRO Performance PERFORMANCE VALVE COVER GASKET SET, 1602

from

$23.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Mr. Gasket Intake Manifold Bolt Set, 6091

from

$39.29

These special Grade 8 intake manifold bolts feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They’re ideal for use where space is minimal, typical on larger runner race manifolds. These bolts and washers are bright zinc plated for protection and good looks.

Mr. Gasket Intake Manifold Bolt Set - Hex Head, 955G

from

$18.79

These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.

Edelbrock Performer-Plus Camshaft Kit for 1976-95 Small Block Chevrolet, 3702

from

$322.99

“Edelbrock part No: 3702 Performer-Plus camshaft is designed for small-block Chevy 305-350 T.B.I & LG-4 V-8 applications. This Edelbrock cam kit produced 245 ft-lbs. of torque when used with No: 3701 intake and stock iron cylinder heads on a 350 engine. The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. This Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters, assembly lube and instructions. Camshaft Specifications: – Duration at .050 Intake: 194 degrees – Duration at .050 Exhaust: 214 degrees – Lift at Valve Intake: .398″” – Lift at Valve Exhaust: .442″” – Lobe Separation: 112 Degrees – Intake Centerline: 107 Degrees – Idle Vacuum at 1000 RPM’s: 16″””

Competition Cams High Energy/Marine 218/218 Hydraulic Flat Cam/Lifter Kit, CL12-210-2

from

$898.99

SMALL BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – High Energy: Good street performance with stock converter, choppy idle. OR High Energy Marine: Biggest cam for inboard/outboard. Good for ski, economy and light performance.

Competition Cams Big Mutha' Thumpr 243/257 Hydraulic Flat Cam/Lifter Kit, CL12-602-4

from

$397.99

SMALL BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.

Competition Cams Xtreme Energy 212/218 Hydraulic Flat Cam, 11-234-3

from

$297.99

Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

from

$259.99

Weiand’s light weight, performance aluminum mechanical Action-Plus water pumps give a weight saving of 30 percent to 50 percent over stock cast-iron pumps. These pumps feature a premium quality bearing and seal that have twice the load capacity of stock pumps. Weiand’s exclusive housing counter bore keeps the bearing form walking out. All pumps are designed with the necessary bracket bosses and water connections to fit popular street applications.

Edelbrock Performer-Plus Camshaft Kit, 7162

from

$431.99

“Edelbrock part No: 7162 Performer RPM Camshaft is designed for big-block Chevy 396-427-454 V-8 applications. This Edelbrock cam kit produced 540 HP & 530 ft-lbs. of torque when used with No: 7163 intake and No: 60559 cylinder heads on a 454 engine. The camshaft works well with high-performance’s street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft. Camshaft Specifications: – Duration at .050 Intake: 240 degrees – Duration at .050 Exhaust: 246 degrees – Lift at Valve Intake: .560″” – Lift at Valve Exhaust: .573″” – Lobe Separation: 112 Degrees – Intake Centerline: 110 Degrees – Idle Vacuum at 1000 RPM’s: 10″””

Competition Cams Magnum 253/253 Hydraulic Flat Cam, 11-214-4

from

$309.99

An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.

from

$10.99

FEL-PRO Performance Engine Intake Manifold Gasket Set, 1212

from

$27.99

Mr. Gasket Intake Manifold Bolt Set - Socket Head, 956G

from

$21.49

These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers.

FEL-PRO Performance PERFORMANCE OIL PAN GASKET SET, 1866

from

$35.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

from

$44.39

Competition Cams OE-Style Hydraulic Roller Lifter Set for '87+ OE Roller SBC and LT/LS Engines, 850-16

from

$288.99

COMP Cams Hydraulic Roller Lifters are a performance upgrade for stock hydraulic roller lifters or retro-fit hydraulic roller lifters for non-roller blocks. The roller wheel decreases friction and increases longevity when compared to flat tappet lifters. Hydraulic roller lifters can handle much more aggressive cam profiles than flat tappets unlocking performance potential.

FEL-PRO Performance Steel core laminate Engine Cylinder Head Gasket, 1010

from

$51.99

from

$223.99

COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.

from

$43.99

Inside tang-to-taper relationship held tightly for repeatable valve spring installed heights

Top-Rated Performance and Racing Products Brands For Your 1995 GMC G3500

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1995 GMC G3500s. Below you’ll find some of our best rated Performance and Racing Products from MSD Ignition, B & M, and FEL-PRO Performance, and more. Performance and Racing Products from these brands that fit a 1995 G3500 start at just $32.99 and are rated as high as 4.3 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular MSD Ignition 1995 GMC G3500 Performance and Racing Products

When it comes to maintaining or upgrading your 1995 GMC G3500, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. MSD Ignition ticks all of those boxes. We offer a wide selection of MSD Ignition Performance and Racing Products, specifically designed for the 1995 GMC G3500. With over 3 MSD Ignition brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $81.99, with an average price of just $188.32. Plus, with over 7 customer reviews and an average rating of 4.3 stars, you can trust that our MSD Ignition Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $82.99

(3)

MSD Ignition Ignition Coil, Gm External Hei, High Performance, 8226

“This product is great, I also installed the msd cap and rotor and an msd ingnition 6a These products togeather create performace and a little more pow”

from $81.99

(3)

MSD Ignition Harness, Msd 6 To Gm Dual-Connector Coil, 8876

“Great”

from $399.99

(1)

MSD Ignition Distributor, Chevy V8, Pro-Billet, With Cap And Rotor, 85551

“Have used this distributor in several engine builds without any issues. Works great when timing is locked also. Won’t use anything else.”

Popular B & M 1995 GMC G3500 Performance and Racing Products

B & M auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1995 GMC G3500 owner should feel confident when installing genuine B & M parts in their vehicle. To ensure the best fit and performance for your 1995 G3500, Advance Auto Parts carries a full inventory of 3 B & M Performance and Racing Products. Plus you will be keeping your GMC in peak condition while saving money because prices on these B & M Performance and Racing Products range from $109.99 to $549.99, plus, with more than 5 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

B & M Automatic Shifter - Megashifter - Universal, 80690

from $549.99

(1)

B & M Automatic Shifter – Megashifter – Universal, 80690

“its was pretty easy to install if u have any type of knowlegde of cars it should not be difficult at all and the shifting is awesome just be careful w”

B & M Automatic Shifter - Unimatic - Universal, 80775

from $299.99

(3)

B & M Automatic Shifter – Unimatic – Universal, 80775

“Super easy to install, works nice.”

from $109.99

(1)

B & M Shiftplus, 4L60E And 4L80E, 70380

“the kit is amazing its a cheap and simple way to increase the shifting ability and performance of a stock transmission, a simple 2 wire install and u ”

FAQs for 1995 GMC G3500 Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1995 GMC G3500s?

Out of 213 Performance and Racing Products that fit 1995 GMC G3500s, the following parts are the top sellers:

K&N Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine, HP-3002 (6120022) – $18.99
K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-2001 (6120007) – $17.99
Mr. Gasket Intake Manifold Bolt Set – Hex Head, 955G (6120970) – $18.79

What’s the price range for 1995 GMC G3500 Performance and Racing Products?

Performance and Racing Product prices for the 1995 GMC G3500 start at $10.69 and go up to $1,623.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1995 GMC G3500?

The average price for Performance and Racing Products for the 1995 GMC G3500 is $316.52. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other GMC G3500 model years?

Yes, we currently carry Performance and Racing Products for 16 model years of GMC G3500s between 1979 and 1996. Performance and Racing Products are bought most frequently for the following model years: 1996, 1994, 1993, 1992, 1991, 1990, 1989, 1988, and 1987.

What are the cheapest Performance and Racing Products for my 1995 GMC G3500?

The cheapest 1995 GMC G3500 Performance and Racing Products we carry in stock are:

Mr. Gasket Chrome Timing Tab, 4593 (5027756) – $10.69
Spectre Bolt Kit Intake Hex Head, 4652 (22905656) – $10.99
Mr. Gasket Timing Tab, 4600 (17360154) – $13.29
Mr. Gasket Chrome Oil Fill Cap – Push-On Style W/Tube For Pvc Hookup – Fitting For Easy Pcv Hose Hook Up, 2063 (12030896) – $13.79
Edelbrock Engine Water Pump Gasket Set, 7252 (10441594) – $15.99

What are the top-rated Performance and Racing Products that fit the 1995 GMC G3500?

Out of 2,591 reviews by customers, our 1995 GMC G3500 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1995 GMC G3500 and their top-rated products:

Performance Shifters
- B & M Automatic Shifter – Megashifter – Universal, 80690 (6900895) – $549.99
- B & M Automatic Shifter – Unimatic – Universal, 80775 (6121233) – $299.99
Performance Oil Filters
- B & M Automatic Shifter – Megashifter – Universal, 80690 (6900895) – $549.99
- B & M Automatic Shifter – Unimatic – Universal, 80775 (6121233) – $299.99
Performance Radiators
- B & M Automatic Shifter – Megashifter – Universal, 80690 (6900895) – $549.99
- B & M Automatic Shifter – Unimatic – Universal, 80775 (6121233) – $299.99

What types of Performance and Racing Products do you sell for my 1995 GMC G3500?

As of 8/2/26, these are some of the most in-demand types of Performance and Racing Products for a 1995 GMC G3500:

Can I get help with 1995 GMC G3500 Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Performance and Racing Products and more.

What is your return policy for GMC G3500 Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new GMC G3500 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1995 GMC G3500 Performance and Racing Products

Mr. Gasket – Mr. Gasket Ultra Seal: Valve Cover Gasket Set, 5862 (Part No.5862)

MSD Ignition – MSD Ignition Distributor, Billet, Gm Hei, 8365 (Part No.8365)

B & M – B & M Tork Master 3000, 20402 (Part No.20402)

Mr. Gasket – Mr. Gasket Ultra Seal: Exhaust Gasket Set, 5912 (Part No.5912)

Accel – Accel Distributor Cap & Rotor Kit – HEI Style – Tan – 1972-1986 Various GM – Clamp Down Cap, 8122 (Part No.8122)

MSD Ignition – "MSD Ignition Crank Trigger Kit, Small Block Chevy, 6"" Balancer, 8600" (Part No.8600)

NOS/Nitrous Oxide Systems – NOS/Nitrous Oxide Systems Nitrous Systems-Performance, 02519NOS (Part No.02519NOS)

Edelbrock – Edelbrock Engine Water Pump Gasket Set, 7251 (Part No.7251)

K&N – K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-2002 (Part No.HP-2002)

B & M – B & M Automatic Shifter – Pro Ratchet – Universal, 80842 (Part No.80842)

Mr. Gasket – Mr. Gasket Chrome Valve Covers – Finned, 9415 (Part No.9415)

Competition Cams – "Competition Cams Valve Springs, 1.250"" Single 1 St, 981-16" (Part No.981-16)

MSD Ignition – MSD Ignition Harness, Msd 6 To Gm Dual-Connector Coil, 8876 (Part No.8876)

Edelbrock – Edelbrock Side-Mount Throttle Linkage, 7077 (Part No.7077)

Edelbrock – Edelbrock Performer-Link Adjustable True-Roller Timing Chain Set, 7810 (Part No.7810)

MSD Ignition – MSD Ignition Ignition Coil, Gm, External Single-Connector, 1996-1997, 8231 (Part No.8231)

Competition Cams – "Competition Cams SUPER VALVE LOCKS, 3/8"" 1 ST, 612-16" (Part No.612-16)

Mr. Gasket – Mr. Gasket Chrome Valve Cover Wing Bolts, 9824 (Part No.9824)

Mr. Gasket – Mr. Gasket Rear Main Seal Gasket, 1960 (Part No.1960)

Mr. Gasket – Mr. Gasket Timing Cover – Chrome, 4590 (Part No.4590)

Edelbrock – Edelbrock Pushrod Set for Small-Block Chevy V-8 Engine Applications, 9630 (Part No.9630)

Mr. Gasket – Mr. Gasket Chrome Oil Fill Cap – Push-On Style W/Tube For Pvc Hookup – Fitting For Easy Pcv Hose Hook Up, 2063 (Part No.2063)

Energy Suspension – Energy Suspension Motor And Transmission Mount, 3.1130R (Part No.3.1130R)

Top Street Performance – Top Street Performance Chevy V8 3HP High Torque Chrome Tilton Style Starter, JM7001C (Part No.JM7001C)

Competition Cams – Competition Cams Mutha’ Thumpr 235/249 Hydraulic Flat Cam and Lifter Kit, CL12-601-4 (Part No.CL12-601-4)

Spectre – Spectre Bolt Kit Intake Hex Head, 4652 (Part No.4652)

B & M – B & M Shiftplus, 4L60E And 4L80E, 70380 (Part No.70380)

Mr. Gasket – Mr. Gasket Thermocap Radiator Cap, 2470R (Part No.2470R)

FEL-PRO Performance – FEL-PRO Performance Perforated steel core w/anti-stick coating Exhaust Manifold Gasket Set, 1444 (Part No.1444)

Mr. Gasket – Mr. Gasket Performance Exhaust Gasket Set For Enhanced Sealing And Durability, 150B (Part No.150B)

Mr. Gasket – Mr. Gasket Exhaust Gasket Set, 153 (Part No.153)

Mr. Gasket – Mr. Gasket Aluminum Exhaust Gaskets For Intense Heat Resistance, 7402G (Part No.7402G)

Mr. Gasket – Mr. Gasket Exhaust Gasket: High-Temperature Protection, Durability, And Reliable Sealing, 150A (Part No.150A)

Hooker Headers – Hooker Headers Hi-Temperature Material, Square Ports, 10808HKR (Part No.10808HKR)

FEL-PRO Performance – FEL-PRO Performance Perforated Steel Core with Anti-Stick Coating Exhaust Manifold Gasket Set, 1411 (Part No.1411)

FEL-PRO Performance – FEL-PRO Performance Perforated steel core w/anti-stick coating Exhaust Manifold Gasket Set, 1410 (Part No.1410)

FEL-PRO Performance – FEL-PRO Performance PERFORMANCE EXHAUST MANIFOLD GASKET SET, 1402 (Part No.1402)

Mr. Gasket – Mr. Gasket Ultra Seal: Exhaust Gasket Set, 5907 (Part No.5907)

Flowtech – Flowtech Gaskets, 99161FLT (Part No.99161FLT)

Flowtech – Flowtech Header Gaskets – Aluminum-Layered, 99150FLT (Part No.99150FLT)

Mr. Gasket – "Mr. Gasket Ultra-Seal Exhaust Gaskets – Hi-Temp Graphite – Small Block Chevy Oval Port – 1.50""W X 1.82""H, 5917" (Part No.5917)

Flowtech – Flowtech Header Gaskets, 99153FLT (Part No.99153FLT)

Mr. Gasket – Mr. Gasket Ultra Seal: Exhaust Gasket Set, 5908 (Part No.5908)

Mr. Gasket – Mr. Gasket Exhaust Manifold Gasket -Performance, 5906 (Part No.5906)

Mr. Gasket – "Mr. Gasket Exhaust Gaskets – Standard Duty – Small Block Chevy Square Port, 1.45""W X 1.48""H – Reusable, 150C" (Part No.150C)

Edelbrock – Edelbrock Exhaust Manifold Gasket Set for Chevrolet, Provides high heat resistance, 7205 (Part No.7205)

MSD Ignition – MSD Ignition Distributor, Chevy V8, Pro-Billet, With Cap And Rotor, 85551 (Part No.85551)

Accel – Accel Truck Super Tune Up Kit for GM Truck with V8 Throttle Body Engines with, TST4HP (Part No.TST4HP)

Accel – Accel Distributor Cap & Rotor Kit – HEI Style – Tan – 1987-1993 Various GM – Screw Down Cap, 8132 (Part No.8132)

Accel – Accel Distributor Rotor – GM – 4.3 / 5.0 / 5.7 / 7.4L – Stainless Steel – 130141, Distributor Rotor, Stock Replacement, Each (Part No.130141)

Accel – Accel Distributor Cap – Chevy / GMC Vortec – V8 – Female – Socket Style – Crab – Black – 120141 distributor cap is a black, socket style heavy duty… (Part No.120141)

Accel – Accel Truck Super Tune Up Kit for GM Truck with V8 Throttle Body Engines – Tune up kit for 1987-95 GM Truck and Van with 5.0L V8 TBI Engine. Also i… (Part No.TST4)

MSD Ignition – "MSD Ignition Distributor Gear, Chevy Distributor, 0.500"" Id, Iron, 8531" (Part No.8531)

MSD Ignition – MSD Ignition Rotor – Extreme Output, Gm Hei, 84101 (Part No.84101)

MSD Ignition – MSD Ignition Distributor, Chevy V8, Billet, With Vacuum Advance, 8361 (Part No.8361)

MSD Ignition – MSD Ignition Distributor, Billet, Gm Hei, 8365 (Part No.8365)

MSD Ignition – MSD Ignition Distributor, Digital E-Curve, 8394 (Part No.8394)

MSD Ignition – MSD Ignition Distributor, Chevy V8, Pro-Billet, Locked, Cap And Rotor, 85501 (Part No.85501)

MSD Ignition – MSD Ignition Distributor, Chevy V8, With Slip Collar, Cap And Rotor, 85561 (Part No.85561)

Top Street Performance – Top Street Performance Chevy Small Block (262-400)/Big Block (396-454) V8 All-Black HEI Distributor, JM6501ABK (Part No.JM6501ABK)

Proform – "Proform HEI Distributor Steel Gear, Fits Chevy Small & Big Block V8 Engines w/ 0.491"" Shaft, 66961C" (Part No.66961C)

MSD Ignition – MSD Ignition Harness, Msd 6 To Gm Dual-Connector Coil, 8876 (Part No.8876)

Mallory – Mallory Unilite Ignition Module, 605 (Part No.605)

MSD Ignition – MSD Ignition Ignition Coil, Gm External Hei, High Performance, 8226 (Part No.8226)

MSD Ignition – MSD Ignition Ignition Coil, Direct-Fit Replacement, High Energy Output, Easy Installation, 5526 (Part No.5526)

PerTronix – PerTronix 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red (Part No.808415)

MSD Ignition – MSD Ignition Wire Set – Super Conductor, Chevy Truck 305-350, 1985-On, 31419 (Part No.31419)

MSD Ignition – MSD Ignition Wire Set – Super Conductor, Big-Block Chevy Pickup, Efi, Sc, 1990-1997, 32119 (Part No.32119)

Mallory – Mallory Distributor Wiring Harness, 29349 (Part No.29349)

MSD Ignition – MSD Ignition Hei Kit With Digital Ignition, Coil, Hei Adapter, And 8.5 Mm Coil Wire, 85001 (Part No.85001)

MSD Ignition – "MSD Ignition Crank Trigger Kit, Small Block Chevy, 6"" Balancer, 8600" (Part No.8600)

MSD Ignition – MSD Ignition Wire Set – Super Conductor, Big-Block Chevy With Pn 8541 Crab Cap, 30829 (Part No.30829)

Mallory – Mallory Promaster Classic Series Ignition Coil, 29440 (Part No.29440)

K&N – K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-2001 (Part No.HP-2001)

K&N – K&N Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine, HP-3002 (Part No.HP-3002)

Mr. Gasket – Mr. Gasket Chrome Oil Fill Cap – Push-On Style W/Tube For Pvc Hookup – Fitting For Easy Pcv Hose Hook Up, 2063 (Part No.2063)

FEL-PRO Performance – FEL-PRO Performance Steel core laminate Engine Cylinder Head Gasket, 1003 (Part No.1003)

FEL-PRO Performance – FEL-PRO Performance Steel core laminate Engine Cylinder Head Gasket, 1004 (Part No.1004)

FEL-PRO Performance – FEL-PRO Performance Stainless steel core laminate Engine Cylinder Head Gasket, 1037 (Part No.1037)