1995 GMC C3500HD Performance and Racing Products
Find Your Specific 1995 GMC C3500HD Performance and Racing Products
Below you will find various in-demand GMC Performance and Racing Products, components and accessories for your 1995 C3500HD. Advance Auto Parts has popular C3500HD parts like Performance Timing Covers, Performance Exhaust Products, Performance Ignition Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other C3500HD model years including
1993,
1994,
1996,
1997,
1998,
1999,
2000,
2001,
2002 and more. Select a category of 1995 GMC C3500HD Performance and Racing Products below and start saving instantly.
Popular 1995 GMC C3500HD Performance and Racing Products Categories
Essential Performance and Racing Products for 1995 GMC C3500HDs
Mr. Gasket – Timing Tab (Part No.4593)
from
$8.79
Installs using stock timing cover bolts. Chrome plated steel is a much better compliment to a chromed timing cover. Has markings for 16 degrees before top dead center (BTDC) to 8 degrees after top dead center (ATDC).
Product Features:
See More
Product Features:
- Bolts on with existing timing cover bolts
- Chrome plated steel is a much better compliment for chrome timing covers
- Markings for 16 degrees BTDC to 8 degrees ATDC
Mr. Gasket – Performance Exhaust Gasket Set for Enhanced Sealing and Durability (Part No.150B)
from
$20.99
Mr. Gasket Performance exhaust gasket material is a heavy duty material, .062 inch thick, consisting of an acrylic binder system to resist high temperature. This material is made for sealing exhaust applications. Provides excellent sealing and durability.
Product Features:
See More
Product Features:
- Manufactured from high-temperature acrylic blend exhaust material
- Provides excellent sealing and durability
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- Resists Deteriorating
- Provides Excellent Torque Retention
Accel – GM 1984-95 Remote Supercoil (Part No.140011)
from
$79.99
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Compatible with late model GM computer controlled remote mount HEI systems. Direct bolt-in, plug-in replacement. Brass coil wire contact increases energy transfer and resists corrosion better than aluminum. Complete with new mounting hardware.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Standard Motor Products SMP DR-37
- MSD 8226
- Resist Corrosion
- W/New Mounting Hardware
Competition Cams – Thumpr 227/241 Hydraulic Flat Cam (Part No.11-600-4)
from
$542.99
HYDRAULIC – Thumpr: High performance street, stock converter ok, best with 2000+ converter and gears. Choppy/thumping idle.
Product Features:
See More
Product Features:
- HYDRAULIC – Thumpr: High performance street, stock converter ok, best with 2000+ converter and gears. Choppy/thumping idle.
- 279/296 Advertised Duration, 227/241 Duration @ .050″, .498″/.483″ Lift, 107 Lobe Separation
- Valve spring upgrade required
Mr. Gasket – Ultra Seal: Sure-Lock Rocker Arm Nuts (Part No.920G)
from
$64.19
These are high quality nuts with allen set screws to provide you with that positive lock needed for Race or original equipment Rocker Arms.
Product Features:
See More
Product Features:
- They Are Zinc Dichromate Plated Steel
- They Have Black Oxide Coated Set Screws
- Keeps Rocker Arms Positively Locked
- (16) Rocker Arm Nuts w/ Locks 3/8″-24 Threads
- Includes Locks and Hex Wrench
- Shank O.D. .603″
B & M – Automatic Shifter, Unimatic Shifter (Part No.80775)
from
$269.99
The B&M Unimatic is an ideal replacement for column shift vehicles, includes neutral safety switch, 5 foot cable and a boot and plate.
Product Features:
See More
Product Features:
- Ideal As Column Shift Replacement
- Includes Neutral Safety Switch
- Includes Black T-Handle
- Backup Light Not Available
- Includes 5 ft. Cable and Hardware
- Includes Boot and Plate
Mr. Gasket – Mls Head Gasket (Part No.3130G)
from
$111.99
Our unique Multi-Layered steel head gasket embossment formation process optimizes the embossment radius, reduces stress points, enhances gasket conformability, and provides uniform clamp load distribution. This all results in superior surface contact between block and cylinder head. All head gasket layers/spacers go through an additional process to significantly reduce forming induced stress. Advantages are reduced brittleness in material, increased flexibility and deformation retention. This stabilizes the gasket, resulting in reduced cylinder bore distortion and improved combustion seal fro the extreme cylinder pressures found in high compression, supercharged and turbocharged applications. A proprietary polymer coating ensures the micro-seal of engine coolant and oil fluids.brbrA typical MLS head gasket requires a smoother (30Ra) surface finish than composite head gaskets. Mr. Gasket’s proprietary polymer coating will seal a surface finish twice as rough (60Ra) as a typical MLS head gasket. For high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Gasket bore – 4.060″ Thickness – .040″
- Manufactured from 3-layer premium grade stainless steel and state of the art laser cutting
- Optimized sealing embossments seals extreme cylinder pressure
- Provides excellent stability and reduces cylinder bore distortion.
- Proprietary polymer coating ensures the micro seal of engine coolant and oil fluids.
- Ideal for supercharged, turbocharged, nitrous oxide and extreme compression ratio engines
- For high-performance street, drag race and oval track use
Mr. Gasket – Premium Quality Thermostat Gasket with Solid Aluminum Carrier (Part No.738G)
from
$31.99
Edge molded rubber water outlet gasket is reusable, great for engines that require regular disassembling for maintenance. Incorporates solid aluminum carrier for strength and rigidity. Can be used with OE replacement or aftermarket chrome water outlets. Requires no gasket sealer.
Product Features:
See More
Product Features:
- Edge Molded Rubber Water Outlet Gasket Is Reusable
- Requires No Gasket Sealer
- Solid Aluminum Carrier For Strength/rigidity
- Reusable – Ideal for Engines That Are Frequently Taken Apart & Reassembled
Mr. Gasket – Precision Timing Tape (Part No.1588)
from
$21.79
Precision timing tape can be used on a factory balancer to create HP through accurate timing, and makes setting valve lash simple.
Product Features:
See More
Product Features:
- 6 3¿4″ diameter
- 6 3┐4″ diameter
- 305, 350 cu. in. 1969-93
- Increased Performance
- Set Valve Lash At Proper Time
Competition Cams – Thumpr 243/257 Hydraulic Flat Cam and Lifter Kit for Chevrolet Big Block 396-454 (Part No.CL11-602-4)
from
$1322.99
BIG BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.
Product Features:
See More
Product Features:
- Cam and lifter kit for Big Block Chevy engines
- CL-Kit includes cam, lifters, assembly lube, instructions and decals
- HYDRAULIC – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.
- 295/312 Advertised Duration, 243/257 Duration @ .050″, .522″/.507″ Lift, 107 Lobe Separation
- Valve spring upgrade required
Mr. Gasket – Valve Cover Gasket Set (Part No.168)
from
$42.49
Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.brbrThese gaskets are .187 inch thick. Fits Chevy 5.0, 5.7L Vortec V8 with center bolt valve covers.
Product Features:
See More
Product Features:
- Manufactured from high-density cork/rubber blend gasket material
- Provides excellent sealing and durability
- For OE replacement, high performance street, drag race and oval track
Mr. Gasket – Header Bolt Set (Part No.2210G)
from
$41.99
Made of high quality stainless steel. These bolts will brighten up your hot rod, or improve the looks of your race car.
Product Features:
See More
Product Features:
- Bright Ball Burnish Finish
- Made From 304 Stainless
- Compact Hex Head Is Ideal Where Space Is Limited
- 12 Per Set
- Resist corrosion and provides a clean professional appearance
Mr. Gasket – Timing Cover Seal (Part No.18)
from
$15.99
If you are changing your camshaft or replacing the timing set, make sure to replace this seal at the same time! Metal with Nitrile rubber seal.
Product Features:
See More
Product Features:
- Nitrile Rubber And High Density Cork
- Will Not Shrink Or Stick
Mr. Gasket – Intake Bolt Kit (Part No.5003)
from
$75.99
Finish your custom engine job with these show quality grade 5 chromed 12-point bolts, includes AN washers which have no exposed shoulder for a professional appearance. Includes (12) 3/8-16 x 1 inch bolts with (12) 3/8 inch AN washers.
Product Features:
See More
Product Features:
- Chrome plated
- Grade 8
- 12-point head
- AN washers with no exposed shoulder for a professional appearance
Mr. Gasket – Advance And Retard Cam Bushings (Part No.85)
from
$42.49
With Mr. Gasket cam degree bushings you fine tune the camshaft timing of your engine to as little as 1 degree. Even aftermarket timing sets with multiple keyways can’t give the range of adjustment these bushings allow. Retard your camshaft to lower the powerband for more low end torque and midrange horsepower, or advance for more top end power. This kit does even number adjustment 0-8 degrees.
Product Features:
See More
Product Features:
- Advance the cam for increased torque and horsepower
- Tune your powerband for more end torque or increase top end horsepower
- Includes (4) offset bushings and (1) 0 degree bushing
- Cam sprocket dowel pin hole must be drilled to .406¿ (13/32¿) dia.
- Cam sprocket dowel pin hole must be drilled to .406┐ (13/32┐) dia.
- Increase Top-End Horsepower
Mr. Gasket – Valve Cover (Part No.9847)
from
$92.99
Chrome plated steel valve cover caps. Fits over original valve covers on 1987-1997 GM (General Motors) small block truck applications only. These caps fit OVER the top of the original equipment valve covers & the original equipment covers use the stock fill cap, breathers, PCV, grommets, and hardware.
Product Features:
See More
Product Features:
- Chrome plated steel construction
- These Caps Fit Over Existing Factory Stock Painted Valve Covers
- Fits Over Truck Center-Bolt Valve Covers
- Sold as a pair
- Fits Truck applications only
- Stock OEM Truck Valve Covers Must Remain in Place & Reuse the Existing Hardware, Breathers, Fill Cap, PVC & Grommets
Mr. Gasket – Intake Gasket (Part No.116)
from
$40.19
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. They provide excellent sealing and durability. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.
Product Features:
See More
Product Features:
- Manufactured from cellulose/nitrile composition gasket material.
- Provides excellent sealing and durability.
- Can be trimmed if necessary for modified port applications.
- Complete with manifold end seals and distributor gasket.
- For OE replacement, high performance street, drag race and oval track use.
Mr. Gasket – Intake Gasket (Part No.101B)
from
$28.99
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. They provide excellent sealing and durability. Can be trimmed if necessary for modified port applications. Complete with manifold end seals and distributor gasket (where applicable). For original equipment replacement, high performance street, drag race and oval track.
Product Features:
See More
Product Features:
- Manufactured from cellulose/nitrile composition gasket material
- Provides excellent sealing and durability
- Can be trimmed if necessary for modified port applications
- Complete with manifold end seals and distributor gasket where applicable
- For OE replacement, high performance street, drag race and oval track use
Mr. Gasket – Rear Main Seal Gasket (Part No.29)
from
$42.49
This Mr. Gasket Rear Main Seal is made from Viton®: Rubber. This style of rubber can handle high temperature like silicone rubber, but with superior abrasion resistance. Its durability and it’s double, offset lip seal design make it recommended for applications that have high engine vacuum, like racing engines that utilize external vacuum pumps for crankcase evacuation.
Product Features:
See More
Product Features:
- Repairs That Leaky Rear Main Sail
- Viton« Rubber Offers Both Abrasion Resistance & High Temperature Tolerance
- Viton® Rubber Offers Both Abrasion Resistance & High Temperature Tolerance
- Upgrade for Rope Seal Equipped Cars or Silicone Rubber Main Seals
Mr. Gasket – Ultra Seal: Oil Pan Stud Kit (Part No.6315)
from
$45.99
The black finish grade 5 bolts have a bullet tip to make installation easy. The zinc plated self-locking nuts give uniform clamping for a positive seal.
Product Features:
See More
Product Features:
- Includes:
- (14) 1/4″-20/28 x 1-1/8″ Long
- (4) 5/16″-18/24 x 1-5/16″ Long
- Zinc Plated Self-Locking Nuts
- Assures Positive Gasket Seal
- The Professionals Choice
Mr. Gasket – Chrome Valve Cover Wing Bolts (Part No.9824)
from
$15.99
Chrome-plated for beauty and durability, wing bolts make valve cover removal fast & easy. They are precision-engineered and feature extra-long threads to accommodate Mr. Gasket re-usable valve cover gasket & custom valve covers.
Product Features:
See More
Product Features:
- Fits Chevy V8
- Standard Y Top 1/4 In-20 X 5/8 in L
- Chrome Plated Steel
- Overall Length: 4.64″
- Installed Length: 4.00″
- Pack of 4
Mr. Gasket – Intake Manifold Bolts (Part No.955G)
from
$15.49
These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.
Product Features:
See More
Product Features:
- Grade 5 socket head bolts are zinc plated for protection and appearance
- Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds
- Washers Included
Upgrade your 1995 GMC C3500HD with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1995 GMC C3500HD, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Performance and Racing Products are key to keeping your C3500HD functioning at its best. At Advance Auto Parts, we offer a wide selection of 31 Performance and Racing Products for the 1995 GMC C3500HD, designed to meet your needs without breaking the bank.
From
Performance Timing Cover
replacements to
Performance Exhaust Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1995 GMC C3500HD at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $8.79 to $1,322.99, with
an average price of $140.11.
Our 31 Performance and Racing Products in stock come from 5 trusted brands, so you’re sure to find the right part for your 1995 GMC C3500HD without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1995 GMC C3500HD, we stock popular OEM and aftermarket Performance and Racing Products from top names
like MSD Ignition Accel, and more.
MSD Ignition Performance and Racing Products
start at just $65.99 and boast an impressive 4.2 stars average rating from customers.
With 98 customer reviews and counting, our 1995 GMC C3500HD Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1995 GMC C3500HD is always ready to roll. We’re committed to providing you with everything you need to keep your C3500HD in top shape, all in one place.
Start shopping confidently below for your 1995 GMC C3500HD!
Best-Selling Performance Timing Covers for 1995 GMC C3500HDs
Enhance the driving experience in your GMC with 3 quality Performance Timing Cover components, starting at $8.79.
Mr. Gasket – Timing Tab (Part No.4598)
from
$15.99
Bolts on with existing timing cover bolts. It is chrome plated steel, which makes is a better compliment to a chrome timing cover. It also has an adjustable red timing pointer. This allows for better visibility and helps you set your timing more easily. Just loosen the screw, set the pointer to the desired initial timing level, and screw it back down. Then you’ll be able to more clearly see if your timing is where you want it when checking your timing.
Product Features:
See More
Product Features:
- Bolts on using existing timing cover bolts
- Chrome finish compliments chrome timing covers
- Red adjustable pointer makes it easier to check timing
Mr. Gasket – Timing Tab (Part No.4593)
from
$8.79
Installs using stock timing cover bolts. Chrome plated steel is a much better compliment to a chromed timing cover. Has markings for 16 degrees before top dead center (BTDC) to 8 degrees after top dead center (ATDC).
Product Features:
See More
Product Features:
- Bolts on with existing timing cover bolts
- Chrome plated steel is a much better compliment for chrome timing covers
- Markings for 16 degrees BTDC to 8 degrees ATDC
Mr. Gasket – Timing Tab W/Adjustable Pointer – Chrome Plated – For 7" Harmonic Balancers (Part No.4597)
from
$21.79
Bolts on with existing timing cover bolts. It is chrome plated steel, which makes is a better compliment to a chrome timing cover. It also has an adjustable red timing pointer. This allows for better visibility and helps you set your timing more easily. Just loosen the screw, set the pointer to the desired initial timing level, and screw it back down. Then you’ll be able to more clearly see if your timing is where you want it when checking your timing. Has markings from 12 degrees before top dead center (BTDC) to 8 degrees after top dead center (ATDC).
Product Features:
See More
Product Features:
- Bolts on using existing timing cover bolts
- Chrome finish compliments chrome timing covers
- Red adjustable pointer makes it easier to check timing
- Timing marks from 12 degrees BTDC to 8 degrees ATDC
Most Popular 1995 GMC C3500HD Performance Exhaust Products
Customize your GMC with 4 Performance Exhaust Products products
like Performance Exhaust Manifold Gaskets and
Performance Exhaust Header Hardware, all
priced under $72.39.
Mr. Gasket – Performance Exhaust Gasket Set for Enhanced Sealing and Durability (Part No.150B)
from
$20.99
Mr. Gasket Performance exhaust gasket material is a heavy duty material, .062 inch thick, consisting of an acrylic binder system to resist high temperature. This material is made for sealing exhaust applications. Provides excellent sealing and durability.
Product Features:
See More
Product Features:
- Manufactured from high-temperature acrylic blend exhaust material
- Provides excellent sealing and durability
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- Resists Deteriorating
- Provides Excellent Torque Retention
Mr. Gasket – Header Bolt Set (Part No.2210G)
from
$41.99
Made of high quality stainless steel. These bolts will brighten up your hot rod, or improve the looks of your race car.
Product Features:
See More
Product Features:
- Bright Ball Burnish Finish
- Made From 304 Stainless
- Compact Hex Head Is Ideal Where Space Is Limited
- 12 Per Set
- Resist corrosion and provides a clean professional appearance
Mr. Gasket – Chrome Low Mount Alternator Bracket – Small Block Chevy – Dress Up Your Engine! (Part No.5179)
from
$72.39
Mr. Gasket small block Chevy lower alternator mounting kit designed to work with a short water pump. Made of heavy gauge chrome plated steel. Complete with all necessary mounting hardware. Designed to relocate the alternator to the lower left side of the motor. This mounting bracket will make your engine compartment look neat and sanitary. Possible cross member interference on some applications.
Product Features:
See More
Product Features:
- Alternator Relocating Kit
- Heavy Gauge Chrome Plated Steel
- All Necessary Hardware Included
- Helps To Give Engine Compartment A Clean Look
- Designed To Work With Short Style Water Pump
- Possible Cross Member Interference On Some App
Mr. Gasket – Exhaust Gaskets – Standard Duty – Small Block Chevy Square Port, 1.45"W X 1.48"H – Reusable (Part No.150C)
from
$36.49
Mr. Gasket Performance exhaust gasket material is a heavy duty material, .062 inch thick, consisting of an acrylic binder system to resist high temperature. This material is made for sealing exhaust applications. Provides excellent sealing and durability.
Product Features:
See More
Product Features:
- Manufactured from high-temperature acrylic blend exhaust material
- Provides excellent sealing and durability
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
Top Picks for 1995 GMC C3500HD Performance Ignition Products
Upgrade GMC C3500HDs with top-quality Performance Ignition Products parts, including 2 OEM and aftermarket selections for your 1995 model.
MSD Ignition – Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation (Part No.5526)
from
$65.99
These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.
Product Features:
See More
Product Features:
- Replacement Coil For GM Dual Connector Coil
- Improved Turns Ratio
- Lower Primary Resistance
- Bolt-In replacement coil
- Produce More Output Voltage
- Smooth Idle
Accel – GM 1984-95 Remote Supercoil (Part No.140011)
from
$79.99
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Compatible with late model GM computer controlled remote mount HEI systems. Direct bolt-in, plug-in replacement. Brass coil wire contact increases energy transfer and resists corrosion better than aluminum. Complete with new mounting hardware.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Standard Motor Products SMP DR-37
- MSD 8226
- Resist Corrosion
- W/New Mounting Hardware
In-Demand Performance Engines for 1995 GMC C3500HDs
Select from 18 premium Performance Engines parts for your 1995 GMC C3500HD, with prices ranging from $15.49 to $1,322.99.
Mr. Gasket – Premium Quality Thermostat Gasket with Solid Aluminum Carrier (Part No.738G)
from
$31.99
Edge molded rubber water outlet gasket is reusable, great for engines that require regular disassembling for maintenance. Incorporates solid aluminum carrier for strength and rigidity. Can be used with OE replacement or aftermarket chrome water outlets. Requires no gasket sealer.
Product Features:
See More
Product Features:
- Edge Molded Rubber Water Outlet Gasket Is Reusable
- Requires No Gasket Sealer
- Solid Aluminum Carrier For Strength/rigidity
- Reusable – Ideal for Engines That Are Frequently Taken Apart & Reassembled
Mr. Gasket – Intake Manifold Bolts (Part No.955G)
from
$15.49
These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.
Product Features:
See More
Product Features:
- Grade 5 socket head bolts are zinc plated for protection and appearance
- Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds
- Washers Included
Mr. Gasket – Valve Cover Gasket Set (Part No.168)
from
$42.49
Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.brbrThese gaskets are .187 inch thick. Fits Chevy 5.0, 5.7L Vortec V8 with center bolt valve covers.
Product Features:
See More
Product Features:
- Manufactured from high-density cork/rubber blend gasket material
- Provides excellent sealing and durability
- For OE replacement, high performance street, drag race and oval track
Mr. Gasket – Precision Timing Tape (Part No.1588)
from
$21.79
Precision timing tape can be used on a factory balancer to create HP through accurate timing, and makes setting valve lash simple.
Product Features:
See More
Product Features:
- 6 3¿4″ diameter
- 6 3┐4″ diameter
- 305, 350 cu. in. 1969-93
- Increased Performance
- Set Valve Lash At Proper Time
Mr. Gasket – Rear Main Seal Gasket (Part No.29)
from
$42.49
This Mr. Gasket Rear Main Seal is made from Viton®: Rubber. This style of rubber can handle high temperature like silicone rubber, but with superior abrasion resistance. Its durability and it’s double, offset lip seal design make it recommended for applications that have high engine vacuum, like racing engines that utilize external vacuum pumps for crankcase evacuation.
Product Features:
See More
Product Features:
- Repairs That Leaky Rear Main Sail
- Viton« Rubber Offers Both Abrasion Resistance & High Temperature Tolerance
- Viton® Rubber Offers Both Abrasion Resistance & High Temperature Tolerance
- Upgrade for Rope Seal Equipped Cars or Silicone Rubber Main Seals
Mr. Gasket – Mls Head Gasket (Part No.3130G)
from
$111.99
Our unique Multi-Layered steel head gasket embossment formation process optimizes the embossment radius, reduces stress points, enhances gasket conformability, and provides uniform clamp load distribution. This all results in superior surface contact between block and cylinder head. All head gasket layers/spacers go through an additional process to significantly reduce forming induced stress. Advantages are reduced brittleness in material, increased flexibility and deformation retention. This stabilizes the gasket, resulting in reduced cylinder bore distortion and improved combustion seal fro the extreme cylinder pressures found in high compression, supercharged and turbocharged applications. A proprietary polymer coating ensures the micro-seal of engine coolant and oil fluids.brbrA typical MLS head gasket requires a smoother (30Ra) surface finish than composite head gaskets. Mr. Gasket’s proprietary polymer coating will seal a surface finish twice as rough (60Ra) as a typical MLS head gasket. For high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Gasket bore – 4.060″ Thickness – .040″
- Manufactured from 3-layer premium grade stainless steel and state of the art laser cutting
- Optimized sealing embossments seals extreme cylinder pressure
- Provides excellent stability and reduces cylinder bore distortion.
- Proprietary polymer coating ensures the micro seal of engine coolant and oil fluids.
- Ideal for supercharged, turbocharged, nitrous oxide and extreme compression ratio engines
- For high-performance street, drag race and oval track use
Mr. Gasket – Intake Gasket (Part No.116)
from
$40.19
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. They provide excellent sealing and durability. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.
Product Features:
See More
Product Features:
- Manufactured from cellulose/nitrile composition gasket material.
- Provides excellent sealing and durability.
- Can be trimmed if necessary for modified port applications.
- Complete with manifold end seals and distributor gasket.
- For OE replacement, high performance street, drag race and oval track use.
Mr. Gasket – Intake Gasket (Part No.101B)
from
$28.99
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. They provide excellent sealing and durability. Can be trimmed if necessary for modified port applications. Complete with manifold end seals and distributor gasket (where applicable). For original equipment replacement, high performance street, drag race and oval track.
Product Features:
See More
Product Features:
- Manufactured from cellulose/nitrile composition gasket material
- Provides excellent sealing and durability
- Can be trimmed if necessary for modified port applications
- Complete with manifold end seals and distributor gasket where applicable
- For OE replacement, high performance street, drag race and oval track use
Mr. Gasket – Ultra Seal: Screw-In Rocker Arm Studs (Part No.1076)
from
$65.99
Mr. Gasket screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street applications. OE style press in rocker studs can actually pull out of the cylinder head when using high lift camshafts. Includes sixteen studs 3/8-24 x 1.47 inch long top x 7/16-14 bottom.
Product Features:
See More
Product Features:
- Black Oxide Coated Grade 8 Steel
- Kit Contains 16 Studs
- Easy To Install
- Heat Treated Steel
- Grade 8 Steel
Mr. Gasket – Intake Gasket (Part No.143)
from
$42.49
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.
Product Features:
See More
Product Features:
- Manufactured from cellulose/nitrile composition gasket material
- Provides excellent sealing and durability
- Die-cut for an excellent fit
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
Mr. Gasket – Timing Cover Seal (Part No.18)
from
$15.99
If you are changing your camshaft or replacing the timing set, make sure to replace this seal at the same time! Metal with Nitrile rubber seal.
Product Features:
See More
Product Features:
- Nitrile Rubber And High Density Cork
- Will Not Shrink Or Stick
Competition Cams – Thumpr 243/257 Hydraulic Flat Cam and Lifter Kit for Chevrolet Big Block 396-454 (Part No.CL11-602-4)
from
$1322.99
BIG BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.
Product Features:
See More
Product Features:
- Cam and lifter kit for Big Block Chevy engines
- CL-Kit includes cam, lifters, assembly lube, instructions and decals
- HYDRAULIC – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.
- 295/312 Advertised Duration, 243/257 Duration @ .050″, .522″/.507″ Lift, 107 Lobe Separation
- Valve spring upgrade required
Competition Cams – Thumpr 227/241 Hydraulic Flat Cam (Part No.11-600-4)
from
$542.99
HYDRAULIC – Thumpr: High performance street, stock converter ok, best with 2000+ converter and gears. Choppy/thumping idle.
Product Features:
See More
Product Features:
- HYDRAULIC – Thumpr: High performance street, stock converter ok, best with 2000+ converter and gears. Choppy/thumping idle.
- 279/296 Advertised Duration, 227/241 Duration @ .050″, .498″/.483″ Lift, 107 Lobe Separation
- Valve spring upgrade required
Competition Cams – CAMSHAFT, BBC 280 MAGNUM HYD 1 EA (Part No.11-208-3)
from
$247.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts. Ideal for use with higher compression ratio engines that
Product Features:
See More
Product Features:
- Best with aftermarket torque converters and 9.5:1 compression.
- Great high RPM power.
- Easy on valve train parts.
- Can be used with mild ratio rocker arms and traditional performance valve springs.
Competition Cams – CAMSHAFT, BBC 280 MAGNUM HYDRAULIC 1 EA (Part No.11-202-3)
from
$235.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications. Offering
Product Features:
See More
Product Features:
- Good blend of efficiency and performance.
- Perfect choice for performance street rebuilds.
- Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
Mr. Gasket – Intake Bolt Kit (Part No.5003)
from
$75.99
Finish your custom engine job with these show quality grade 5 chromed 12-point bolts, includes AN washers which have no exposed shoulder for a professional appearance. Includes (12) 3/8-16 x 1 inch bolts with (12) 3/8 inch AN washers.
Product Features:
See More
Product Features:
- Chrome plated
- Grade 8
- 12-point head
- AN washers with no exposed shoulder for a professional appearance
Mr. Gasket – Ultra Seal: Sure-Lock Rocker Arm Nuts (Part No.920G)
from
$64.19
These are high quality nuts with allen set screws to provide you with that positive lock needed for Race or original equipment Rocker Arms.
Product Features:
See More
Product Features:
- They Are Zinc Dichromate Plated Steel
- They Have Black Oxide Coated Set Screws
- Keeps Rocker Arms Positively Locked
- (16) Rocker Arm Nuts w/ Locks 3/8″-24 Threads
- Includes Locks and Hex Wrench
- Shank O.D. .603″
Mr. Gasket – Advance And Retard Cam Bushings (Part No.85)
from
$42.49
With Mr. Gasket cam degree bushings you fine tune the camshaft timing of your engine to as little as 1 degree. Even aftermarket timing sets with multiple keyways can’t give the range of adjustment these bushings allow. Retard your camshaft to lower the powerband for more low end torque and midrange horsepower, or advance for more top end power. This kit does even number adjustment 0-8 degrees.
Product Features:
See More
Product Features:
- Advance the cam for increased torque and horsepower
- Tune your powerband for more end torque or increase top end horsepower
- Includes (4) offset bushings and (1) 0 degree bushing
- Cam sprocket dowel pin hole must be drilled to .406¿ (13/32¿) dia.
- Cam sprocket dowel pin hole must be drilled to .406┐ (13/32┐) dia.
- Increase Top-End Horsepower
Most Sold 1995 GMC C3500HD Performance Valve Covers
Explore our best-selling GMC parts for the 1995 C3500HD among 2 OEM and aftermarket options starting from $15.99.
Mr. Gasket – Chrome Valve Cover Wing Bolts (Part No.9824)
from
$15.99
Chrome-plated for beauty and durability, wing bolts make valve cover removal fast & easy. They are precision-engineered and feature extra-long threads to accommodate Mr. Gasket re-usable valve cover gasket & custom valve covers.
Product Features:
See More
Product Features:
- Fits Chevy V8
- Standard Y Top 1/4 In-20 X 5/8 in L
- Chrome Plated Steel
- Overall Length: 4.64″
- Installed Length: 4.00″
- Pack of 4
Mr. Gasket – Valve Cover (Part No.9847)
from
$92.99
Chrome plated steel valve cover caps. Fits over original valve covers on 1987-1997 GM (General Motors) small block truck applications only. These caps fit OVER the top of the original equipment valve covers & the original equipment covers use the stock fill cap, breathers, PCV, grommets, and hardware.
Product Features:
See More
Product Features:
- Chrome plated steel construction
- These Caps Fit Over Existing Factory Stock Painted Valve Covers
- Fits Over Truck Center-Bolt Valve Covers
- Sold as a pair
- Fits Truck applications only
- Stock OEM Truck Valve Covers Must Remain in Place & Reuse the Existing Hardware, Breathers, Fill Cap, PVC & Grommets
Top-Rated Performance and Racing Products Brands For Your 1995 GMC C3500HD
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1995 GMC C3500HDs. Below you’ll find some of our best rated Performance and Racing Products from MSD Ignition and Accel, and more. Performance and Racing Products from these brands that fit a 1995 C3500HD start at just $65.99 and are rated as high as 4.2 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular MSD Ignition 1995 GMC C3500HD Performance and Racing Products
When it comes to maintaining or upgrading your 1995 GMC C3500HD, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. MSD Ignition ticks all of those boxes. We offer a wide selection of MSD Ignition Performance and Racing Products, specifically designed for the 1995 GMC C3500HD. With over 1 MSD Ignition brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $65.99. Plus, with over 7 customer reviews and an average rating of 4.2 stars, you can trust that our MSD Ignition Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$65.99
(7)
Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation
“Worked great”
Popular Accel 1995 GMC C3500HD Performance and Racing Products
Accel auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1995 GMC C3500HD owner should feel confident when installing genuine Accel parts in their vehicle. To ensure the best fit and performance for your 1995 C3500HD, Advance Auto Parts carries a full inventory of 1 Accel Performance and Racing Products. Plus you will be keeping your GMC in peak condition while saving money because prices on these Accel Performance and Racing Products range up to $79.99, plus, with more than 15 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
FAQs for 1995 GMC C3500HD Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1995 GMC C3500HDs?
Out of 31 Performance and Racing Products that fit 1995 GMC C3500HDs, the following parts are the top sellers:
- Premium Quality Thermostat Gasket with Solid Aluminum Carrier (6900023) – $31.99
- Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation (6900027) – $65.99
- Timing Tab (17360175) – $15.99
What’s the price range for 1995 GMC C3500HD Performance and Racing Products?
Performance and Racing Product prices for the 1995 GMC C3500HD start at $8.79 and go up to $1,322.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1995 GMC C3500HD?
The average price for Performance and Racing Products for the 1995 GMC C3500HD is $140.11. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other GMC C3500HD model years?
What are the cheapest Performance and Racing Products for my 1995 GMC C3500HD?
The cheapest 1995 GMC C3500HD Performance and Racing Products we carry in stock are:
- Timing Tab (5027756) – $8.79
- Intake Manifold Bolts (6120970) – $15.49
- Chrome Valve Cover Wing Bolts (6121519) – $15.99
- Timing Tab (17360175) – $15.99
- Timing Cover Seal (17360181) – $15.99
What are the top-rated Performance and Racing Products that fit the 1995 GMC C3500HD?
Out of 98 reviews by customers, our 1995 GMC C3500HD Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1995 GMC C3500HD and their top-rated products:
- Performance Ignition Products
- Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation (6900027) – $65.99
- GM 1984-95 Remote Supercoil (17370040) – $79.99
- Performance Exhaust Products
- Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation (6900027) – $65.99
- GM 1984-95 Remote Supercoil (17370040) – $79.99
What types of Performance and Racing Products do you sell for my 1995 GMC C3500HD?
As of 4/10/25, these are some of the most in-demand types of Performance and Racing Products for a 1995 GMC C3500HD:
Can I get help with 1995 GMC C3500HD Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Performance and Racing Products and more.
What is your return policy for GMC C3500HD Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new GMC C3500HD Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
