1995 GMC C3500 Performance and Racing Products

Popular 1995 GMC C3500 Performance and Racing Products Categories

Essential Performance and Racing Products for 1995 GMC C3500s

Accel – 8Mm Super Stock Graphite Cust (Part No.4071)

8Mm Super Stock Graphite Cust

from

$72.99
These ACCEL Super Stock wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with zinc-plated steel terminals.

Product Features:
  • Graphite supression eliminates RFI/EMI
  • 3,000 to 7,000 ohms per foot of resistance
  • Silicone Spark Plug Boots
  • 450 Degree Temperature Rating
See More

Energy Suspension – Leaf Spring Bushing Set (Part No.3.2128R)

Leaf Spring Bushing Set

from

$91.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Adds Dramatic Amount of Performance/Durability
  • Helps Vehicle Be in Control
  • Allows the Suspension to Function Properly
See More

MSD Ignition – Distributor; Chevy V8 with Internal Module (Part No.8360)

Distributor; Chevy V8 with Internal Module

from

$469.99
The Pro-Billet Ready-to-Run distributor is the perfect upgrade for outdated points distributors or bulky HEI. Simply install the distributor in the engine, connect three wires, the coil and fire it up! A maintenance-free magnetic pick-up accurately triggers the module. The increased output of the amplifier easily outperforms stock ignitions and will smooth out the engine’s idle, improve starting and provide a much higher RPM range. The Ready-to-Run features MSD’s adjustable mechanical advance which allows you to custom tailor an ignition curve to match your engine’s needs. There is also a vacuum advance canister to help improve economy. For positive street performance, the Ready-to-Run is the best choice.

Product Features:
  • Simple and clean three wire installation
  • Supplied w/An HEI Style Distributor Cap And Rotor
  • Accepts Cap-A-Dapts
  • Does not require an MSD Ignition Control
  • CARB E.O. Approved
  • Now includes built-in Rev Limiter
  • O-ring seals can be installed for oil press. control (Mods only)
  • Special oil tract improves lubrication to the dist./cam gear
See More

Spectre – Valve Cover (Part No.5280)

Valve Cover

from

$14.99
Spectre’s Valve Cover Hold Downs feature high quality steel construction with a triple chrome-plated finish. Manufactured for an optimum fit, this product’s hex heads include a decorative O-ring cap for a customizable appearance to suit your needs. Sold 4 per package, these studs are intended to fit standard height Chevy Center bolt valve covers.

Product Features:
  • 4 bolts included in each package
  • Allen head includes decorative O-ring cap
  • Triple chrome-plated finish
  • Fits standard height Chevy Center bolt valve covers
See More

Energy Suspension – Ball Joint Dust Boot Set (Part No.9.13126G)

Ball Joint Dust Boot Set

from

$11.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Lasts Longer
  • Looks Great
See More

Edelbrock – Signature Series Valve Covers: Small Block Chevy 262-400 1959-86, Black Steel (Part No.4443)

Signature Series Valve Covers: Small Block Chevy 262-400 1959-86, Black Steel

from

$56.99
The Edelbrock #4443 Signature Series Valve Covers are designed for Chevrolet 262-400 ’59-86 applications. Engineered for function and styled for great looks, Signature Series valve covers have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valve holes. Rubber grommets for the breather and PCV valve holes are included. Matching breathers sold separately.

Product Features:
  • Small Block Chevy 262-400 1959-86
  • Short
  • Black Steel
  • Set Of Two
  • Matching breathers sold separately.
See More

Hypertech – ThermoMaster Computer Power Chip, with Overdrive, California Model Only (Part No.858832)

ThermoMaster Computer Power Chip, with Overdrive, California Model Only

from

$214.49
Hypertech ThermoMaster Power Chips are engineered for stock 1995-1981 GM vehicles (premium octane fuel required). The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. ThermoMaster Power Chips are designed for daily street driving or competition in unmodified vehicles using a 160 Deg. or 180 Deg. thermostat. Hypertech Power Chips(TM) are emissions certified 50-state legal (application specific).

Product Features:
  • Use w/Low-Temp 160-180 Deg. PowerStat Thermostat
  • Controls Engines Air/Fuel Ratio
  • Controls Spark Advance For Max Power
  • Potential Gas Mileage Improvements
  • No Wiring Or Soldering Required
  • Installs In Less Than 30 Minutes
See More

Mr. Gasket – Chrome Plated Pulley Set (Part No.4962)

Chrome Plated Pulley Set

from

$172.99
New chromed steel pulleys are a replacement for originals and are designed as matched sets to assure correct alignment of the drive belts. They are highly polished then chrome plated. Crankshaft Pulley = 7.30 inch diameter Water Pump Pulley = 6.30 inch diameter

Product Features:
  • Chrome plated steel
  • Designed as matched assemblies
See More

Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5911)

Ultra Seal: Exhaust Gasket Set

from

$38.59
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:
  • Has A Steel Core With Graphite Facing
  • Graphite Facing Has Excellent Thermo-conductivity
  • Can Be Trimmed If Necessary For Modified Port App
See More

Edelbrock – Water Pump for 1988 and later C/K pickups in Satin Finish (Part No.8853)

Water Pump for 1988 and later C/K pickups in Satin Finish

from

$323.99
Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in one direction for optimum efficiency. In the early days of the automotive performance industry, you either ran what was available, or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.

Product Features:
  • Maximum Cooling for Street and Racing Engines
  • Internal Passages Are Balanced for Maximum Flow
  • Impeller is Larger than Others For Max Pressure
  • Impeller Vanes Dramatically Increase Flow Rates
  • Equal Distribution to Both Sides of Block
  • Only Flows in One-Direction for Optimum Efficiency
See More

Edelbrock – Front Timing Cover Gasket Set #6998 For Big-Block Chevy, With Front Seal (Part No.6998)

Front Timing Cover Gasket Set #6998 For Big-Block Chevy, With Front Seal

from

$31.99
Edelbrock part #6998 Front Timing Cover Gasket set for Big-Block Chevy. Includes front cover gasket and front seal.

Product Features:
  • Includes replacement timing cover and water pump gaskets and the crank oil seal for big block Chevrolet engines
  • Features a tough, scuff-resistant silicone rubber coating
  • Helps in sealing without the engine warming up
  • Reduces fluid migration through the gasket
  • Resists fatigue
See More

Spectre – Alternator Bracket (Part No.4719)

Alternator Bracket

from

$30.99
This Spectre Alternator Bracket is an upper mount designed to fit 1969 and later Chevrolet Big Block engines with a long water pump. Featuring a triple chrome-plated finish and high quality steel construction, this part is an OEM replacement that mounts on the passenger’s side.

Product Features:
  • Fits Big Block Chevy engines with a long water pump from 1969 and later
  • Manufactured from high quality steel
  • Upper bracket for passenger side mounting
  • Features a triple chrome-plated finish
  • Stock replacement part
See More

Spectre – Throttle Body Injection Spacer (Part No.11252)

Throttle Body Injection Spacer

from

$94.99
Manufactured from high quality machine finished aluminum, Spectre’s Throttle Body Spacers are engineered to improve engine performance. By providing added volume to the intake manifold and directing air through a tapered internal constriction, this spacer utilizes the Venturi effect to increase the speed of air flowing into your intake manifold. Spectre has designed a number of kits to fit a wide range of specific applications. Each kit includes the necessary gaskets and hardware to bolt directly to the factory components, making installation quick and easy.

Product Features:
  • Includes the necessary gaskets and hardware to bolt directly to the factory components
  • Each kit is designed for the applications listed
  • Manufactured from high quality machine finished aluminum
  • Can be installed in less than an hour using common hand tools with no drilling or cutting required
  • Simple to install
See More

Mr. Gasket – Ultra Seal: Screw-In Rocker Arm Studs (Part No.1076)

Ultra Seal: Screw-In Rocker Arm Studs

from

$65.99
Mr. Gasket screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street applications. OE style press in rocker studs can actually pull out of the cylinder head when using high lift camshafts. Includes sixteen studs 3/8-24 x 1.47 inch long top x 7/16-14 bottom.

Product Features:
  • Black Oxide Coated Grade 8 Steel
  • Kit Contains 16 Studs
  • Easy To Install
  • Heat Treated Steel
  • Grade 8 Steel
See More

MSD Ignition – Crank Trigger Kit; Small Block Chevy; 6? Balancer (Part No.8600)

Crank Trigger Kit; Small Block Chevy; 6? Balancer

from

$461.99
For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

Product Features:
  • 6.25 in. Diameter
  • Absolutely the most accurate way to trigger the ignition.
  • The non-magnetic pickup cannot be false triggered.
  • Powerful magnets are embedded in a billet aluminum trigger wheel.
See More

Competition Cams – Thumpr 227/241 Hydraulic Flat Cam (Part No.11-600-4)

Thumpr 227/241 Hydraulic Flat Cam

from

$542.99
HYDRAULIC – Thumpr: High performance street, stock converter ok, best with 2000+ converter and gears. Choppy/thumping idle.

Product Features:
  • HYDRAULIC – Thumpr: High performance street, stock converter ok, best with 2000+ converter and gears. Choppy/thumping idle.
  • 279/296 Advertised Duration, 227/241 Duration @ .050″, .498″/.483″ Lift, 107 Lobe Separation
  • Valve spring upgrade required
See More

Flowmaster Inc. – Super 40 Series Muffler, 3in Offset Inlet 3in Center Outlet, Non-Reversible, Aggressive Sound (Part No.953046)

Super 40 Series Muffler, 3in Offset Inlet 3in Center Outlet, Non-Reversible, Aggressive Sound

from

$133.99
The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

MSD Ignition – Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation (Part No.5526)

Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation

from

$65.99
These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.

Product Features:
  • Replacement Coil For GM Dual Connector Coil
  • Improved Turns Ratio
  • Lower Primary Resistance
  • Bolt-In replacement coil
  • Produce More Output Voltage
  • Smooth Idle
See More

Edelbrock – Cylinder Head Gasket Set for Chevrolet (Part No.7310)

Cylinder Head Gasket Set for Chevrolet

from

$58.99
Product Features:
  • 4.125 in. Cylinder Bore Diameter
  • 0.039 in. Thickness
  • 8.7cc Volume
  • Charcoal Color
  • Two Piece Configuration
See More

Competition Cams – Thumpr 243/257 Hydraulic Flat Cam and Lifter Kit for Chevrolet Big Block 396-454 (Part No.CL11-602-4)

Thumpr 243/257 Hydraulic Flat Cam and Lifter Kit for Chevrolet Big Block 396-454

from

$1322.99
BIG BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.

Product Features:
  • Cam and lifter kit for Big Block Chevy engines
  • CL-Kit includes cam, lifters, assembly lube, instructions and decals
  • HYDRAULIC – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.
  • 295/312 Advertised Duration, 243/257 Duration @ .050″, .522″/.507″ Lift, 107 Lobe Separation
  • Valve spring upgrade required
See More

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1804)

PERFORMANCE OIL PAN GASKET SET

from

$27.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
  • With steel core to provide ultimate excellent blowout resistance.
  • Not intended for use in emission controlled vehicles.
See More

Mr. Gasket – Ultra Seal: Oil Pan Gasket (Part No.6561)

Ultra Seal: Oil Pan Gasket

from

$68.99
High performance, race quality gasket with molded rubber coating over a steel core. Steel core provides rigidity and durability, preventing prevent push out while the molded rubber coating helps seal minor oil pan rail irregularities. The one piece design eliminates the need for separate end seals to make installation easier and even further reduce the possibility of oil leakage. Provides excellent sealing and durability. Excellent replacement for stock original equipment, high performance street, drag race and oval track. Includes gasket and new oil pan bolts.

Product Features:
  • Steel core provides rigidity, durability and prevents gasket push out
  • Molded rubber coating seals minor irregularities in pan surface
  • One piece design is easier to install and even less prone to leak
  • Direct replacement suitable for all uses – street, racing, heavy duty
  • Include both gasket and new oil pan bolts
See More

B & M – Flexplate, 168 Tooth 400 CID (Part No.20232)

Flexplate, 168 Tooth 400 CID

from

$187.99
As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1955 to 1985 400ci small block Chevy V8 engines (externally balanced) with two piece rear main seal. Features include high tensile strength steel construction to resist elongation and cracking, dual bolt pattern 10.75 or 11.5 inch converter mounting locations, 168 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with Powerglide, TH350, TH400 and TH700R4 automatic transmissions.

Product Features:
  • NHRA/IHRA Legal For All Classes
  • Includes SFI Certification Sticker
  • Ideal For Street Applications
  • To Extreme Duty Racing
  • To High RPM Use
See More

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

Spectre – Air Cleaner Top (Part No.4938)

Air Cleaner Top

from

$45.99
Spectre Air Cleaner Tops are heavy gauge chrome-plated replacement lids for single and dual stud Chevy/GM air cleaners. This lid is designed to fit the dual stud 15-1/2 inch air cleaner assembly on 1993 and later Chevy/GMC Small block V8 pickups. Featuring a bonded rubber ring to ensure a tight seal, this OEM replacement is manufactured using high quality materials and engineered for optimum fit and function.

Product Features:
  • Heavy gauge steel construction
  • Fits 15-1/2 inch air cleaner assemblies with a dual stud
  • Features a bonded rubber ring
  • Dual stud OEM replacement
  • Triple chrome-plated finish
See More

Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5894)

Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95

from

$147.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • Complete Kit: Includes Retainers And Locks
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Includes Superior Quality Steel Retainers
  • Includes 7 deg. Heat-Treated Valve Stem Locks
  • Retainers and Locks Black Oxide Coated
  • Dyno Tested And Street Proven
  • Great Match to Edelbrock Camshaft Kit
See More

Mr. Gasket – Enhancement Products (Part No.2060)

Enhancement Products

from

$10.49
This chrome plated breather, embossed with a Mr. Gasket logo, is perfect for race car vacuum balance systems and OEM use. It fits any 1 1/4 inch diameter hole. It has metal baffle/foam element with 1 inch outer diameter neck and 5/8 inch outer diameter breather tube.

Product Features:
  • Internally battled
  • High-porosity filter
  • Ideal for high performance
  • Includes rubber grommet
See More

Energy Suspension – Hyper-Flex System (Part No.3.18107G)

Hyper-Flex System

from

$377.99
Product Features:
  • Incredible Improvement in Control
  • Maintains Proper Caster and Camber Alignment
  • Increase in Handling and Control
  • Greatly Reduce Wheel Hop on Quick Acceleration
  • Even Braking Control is Improved
  • Better Suspension Stability
See More

Upgrade your 1995 GMC C3500 with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1995 GMC C3500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Performance and Racing Products are key to keeping your C3500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 138 Performance and Racing Products for the 1995 GMC C3500, designed to meet your needs without breaking the bank. From Performance Oil Filter replacements to Performance Engines upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1995 GMC C3500 at great prices. Our Performance and Racing Products inventory for this model ranges from just $9.99 to $1,322.99, with an average price of $179.03. Our 138 Performance and Racing Products in stock come from 23 trusted brands, so you’re sure to find the right part for your 1995 GMC C3500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1995 GMC C3500, we stock popular OEM and aftermarket Performance and Racing Products from top names like Mr. Gasket, Energy Suspension, FEL-PRO Performance, and more. Mr. Gasket Performance and Racing Products start at just $10.49 and boast an impressive 4 stars average rating from customers. Energy Suspension and FEL-PRO Performance also bring quality to the table, with Performance and Racing Products available starting at $9.99, and at an average 4 stars rating. With 328 customer reviews and counting, our 1995 GMC C3500 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1995 GMC C3500 is always ready to roll. We’re committed to providing you with everything you need to keep your C3500 in top shape, all in one place. Start shopping confidently below for your 1995 GMC C3500!

Best-Selling Performance Oil Filters for 1995 GMC C3500s

Enhance the driving experience in your GMC with 2 quality Performance Oil Filter components, starting at $10.49.

Mr. Gasket – Enhancement Products (Part No.2060)

Enhancement Products

from

$10.49
This chrome plated breather, embossed with a Mr. Gasket logo, is perfect for race car vacuum balance systems and OEM use. It fits any 1 1/4 inch diameter hole. It has metal baffle/foam element with 1 inch outer diameter neck and 5/8 inch outer diameter breather tube.

Product Features:
  • Internally battled
  • High-porosity filter
  • Ideal for high performance
  • Includes rubber grommet
See More

Mr. Gasket – Chrome Oil Fill Cap – Push-On Style W/Tube For Pvc Hookup – Fitting For Easy Pcv Hose Hook Up (Part No.2063)

Chrome Oil Fill Cap - Push-On Style W/Tube For Pvc Hookup - Fitting For Easy Pcv Hose Hook Up

from

$12.99
This chrome-plated steel push-on breather/oil filler cap fits over your oil filler tube. It has a side fitting for easy PCV hose (positive crankcase ventilation) hook up. Perfect compliment to Mr. Gasket matching chrome oil filler tube, #2066

Product Features:
  • Chrome plated steel
  • Fits stock factory oil filler tubes
  • Features side PCV hook up tube
  • Includes Rubber Grommet
See More

Most Popular 1995 GMC C3500 Performance Engines

Customize your GMC with 60 Performance Engines products like Performance Engine Intake Manifold Gaskets, Performance Engine Cylinder Head Gaskets, and Performance Intake Manifolds, all priced under $1,322.99.

FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1003)

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

from

$39.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
  • NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
  • SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
  • STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1004)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

from

$52.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
  • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
  • Raises combustion sealing force to roughly three times that of standard head gaskets.
  • Steel wire rings for the greatest combustion seal strength.
  • Not intended for use in emission controlled vehicles.
See More

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1037)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

from

$65.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
  • NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
  • SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
  • STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1603)

Engine Valve Cover Gasket Set

from

$23.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
  • Not intended for use in emission controlled vehicles.
See More

Edelbrock – Performer Intake Manifold for 1987-95 Small Block Chevy, Satin Finish (Part No.2104)

Performer Intake Manifold for 1987-95 Small Block Chevy, Satin Finish

from

$329.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 Deg Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
  • Accepts Late-Model Choke; Waterneck; and HEI
  • Accepts A/C And Alternator
  • Accepts Exhaust Heated Chokes
See More

Spectre – Throttle Body Injection Spacer (Part No.11252)

Throttle Body Injection Spacer

from

$94.99
Manufactured from high quality machine finished aluminum, Spectre’s Throttle Body Spacers are engineered to improve engine performance. By providing added volume to the intake manifold and directing air through a tapered internal constriction, this spacer utilizes the Venturi effect to increase the speed of air flowing into your intake manifold. Spectre has designed a number of kits to fit a wide range of specific applications. Each kit includes the necessary gaskets and hardware to bolt directly to the factory components, making installation quick and easy.

Product Features:
  • Includes the necessary gaskets and hardware to bolt directly to the factory components
  • Each kit is designed for the applications listed
  • Manufactured from high quality machine finished aluminum
  • Can be installed in less than an hour using common hand tools with no drilling or cutting required
  • Simple to install
See More

Competition Cams – Engine Valve Spring Kit (Part No.911-16)

Engine Valve Spring Kit

from

$759.99
Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. Selecting the right metal stock and creating the best design is not done by chance. COMP Cams has developed a process that creates the highest quality valve spring available. The result is a product that meets and exceeds the expectations of today’s engine builders and racers.O.D. Dia. 1 I.D. Dia. 2 Damper Seat Load Open Load Coil Bind Rate (Lbs./In.) Titanium Retainer Steel Retainer Cup Seat Shims 1.524 1.110 Y 122 @ 1.900 309 @ 1.400 1.200 373 721, 732 1732, 741 4779* 4757

Product Features:
  • Seat pressure: 122 lbs. @ 1.900″, Open Pressure: 309 lbs. @ 1.400″
  • O.D.: 1.524″, I.D.: 1.110″
  • Single valve springs with damper
See More

Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5794)

Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95

from

$151.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • Complete Kit: Includes Retainers And Locks
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Includes Superior Quality Steel Retainers
  • Includes 7 deg. Heat-Treated Valve Stem Locks
  • Retainers and Locks Black Oxide Coated
  • Non-Rotator Style: Dyno Tested and Street Proven
  • Great Match to Edelbrock Camshaft Kit
See More

FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1602)

PERFORMANCE VALVE COVER GASKET SET

from

$23.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Die cut silicone rubber gaskets conform to out-of-flat covers
  • Great for on-again/off-again situations
  • Not intended for use in emission controlled vehicles.
See More

Edelbrock – Performer-Plus Camshaft Kit for 1976-95 Small Block Chevrolet (Part No.3702)

Performer-Plus Camshaft Kit for 1976-95 Small Block Chevrolet

from

$306.99


Product Features:
  • Designed for Optimum Torque and Acceleration
  • Maximum Performance From Idle through Mid-Range
  • Matched to Edelbrock Performer Intakes
  • Includes Hydraulic Lifters and Assembly Lube
  • Major Improvement in Throttle Response and Torque
  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • Take The Guesswork Out Of Camshaft Selection
See More

Weiand – Action Plus Water Pumps (Part No.9240P)

Action Plus Water Pumps

from

$215.99
Weiand’s light weight, performance aluminum mechanical Action-Plus water pumps give a weight saving of 30 percent to 50 percent over stock cast-iron pumps. These pumps feature a premium quality bearing and seal that have twice the load capacity of stock pumps. Weiand’s exclusive housing counter bore keeps the bearing form walking out. All pumps are designed with the necessary bracket bosses and water connections to fit popular street applications.

Product Features:
  • Twisted Snout Water Pump Design For Updated Style
  • Street Performance
  • Heavy Duty Shaft w/5/8 in. Pilot
  • Six-Blade Stamped Steel
  • Anti-Cavitation Impeller
  • 100 Percent Leak Tested
See More

Weiand – Action Plus Water Pumps (Part No.9208P)

Action Plus Water Pumps

from

$215.99
Weiand’s light weight, performance aluminum mechanical Action-Plus water pumps give a weight saving of 30 percent to 50 percent over stock cast-iron pumps. These pumps feature a premium quality bearing and seal that have twice the load capacity of stock pumps. Weiand’s exclusive housing counter bore keeps the bearing form walking out. All pumps are designed with the necessary bracket bosses and water connections to fit popular street applications.

Product Features:
  • Twisted Snout Water Pump Design For Updated Style
  • Street Performance
  • Heavy Duty Shaft w/5/8 in. Pilot
  • Six-Blade Stamped Steel
  • Anti-Cavitation Impeller
  • 100 Percent Leak Tested
See More

Edelbrock – Sure Seat Valve Springs for Ford 429/460 V8 1969-1987 (Part No.5767)

Sure Seat Valve Springs for Ford 429/460 V8 1969-1987

from

$111.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • For Use With Cast Iron Heads
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Use with Original Equipment Heads Only
See More

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 9 Piece Set (Part No.1212)

Lower Intake Manifold Gasket Set: 9 Piece Set

from

$27.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)

Intake Manifold Bolt Set - Chevrolet Small Block - Socket Head 3/8"-16 X 1" Bolts & Washers

from

$17.49
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers

Product Features:
  • Zinc plated to resist corrosion and provide a clean professional appearance
  • Made from Grade 5 steel for strength and durability
  • Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
  • Allen (socket) Head
  • Zinc Plated For Protection
See More

Mr. Gasket – Bolt Water Pump (Part No.4998)

Bolt Water Pump

from

$32.99
This Mr. Gasket Water Pump Bolt Set includes chrome plated grade 5 hex head fasteners to install the water pump on your small or big block Chevrolet with the long style water pump. Includes four 3/8 inch-16 x 2 inch bolts with four 3/8 inch AN washers. AN washers have no exposed shoulder which offers a professional appearance.

Product Features:
  • Chrome Plated
  • Grade 5
  • AN washers with no exposed shoulder for a professional appearance
See More

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1866)

PERFORMANCE OIL PAN GASKET SET

from

$33.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Rigid core, molded silicone rubber gaskets utilize the one-piece molded rubber technology for a perfect fit, ease of installation and include compression limiters to prevent overtightening.
  • Not intended for use in emission controlled vehicles.
See More

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1010)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

from

$39.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
  • NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
  • SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
  • STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Edelbrock – Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads (Part No.5703)

Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads

from

$65.99
Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • For Use With Cast Iron Heads
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Use with Original Equipment Heads Only
See More

Mr. Gasket – Ultra Seal: Valve Cover Gasket Set (Part No.5867)

Ultra Seal: Valve Cover Gasket Set

from

$38.49
Ultra-Seal is Mr. Gasket premium valve cover gasket material. It’s manufactured from a high density cork and rubber blend with a black latex coat applied to the outside to help seal minor flange irregularites and eliminate oil leakage. It creates a positive seal by controlled swelling of the gasket material when exposed to hot oil. For original equipment replacement, high performance street, drag race and oval track use. Sold as a pair, these gaskets are .187 inch thick. They fit both 1987-2002 Gen I Chevrolet Small Blocks as well as 1992-1997 Gen II LT-Based Small Blocks.

Product Features:
  • Manufactured from high-density cork /rubber blend gasket material
  • A black latex rubber coating is applied to outside of gasket to help seal minor flange irregularities and eliminate the possibility of oil leakage
  • Creates a positive seal by controlled swelling of the gasket material when exposed to hot engine oil
  • For OE replacement, high performance street, drag race and oval track
  • .187″ thick
  • Handles Ex Flange Pressure
  • Forms Leak Proof Seal
  • Black Latex Coating
See More

Mr. Gasket – Intake Manifold Bolts (Part No.957G)

Intake Manifold Bolts

from

$25.99
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes sixteen (16) 3/8 inch-16 x 1-1/4 inch bolts & washers

Product Features:
  • Zinc plated Grade 5 steel
  • Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
  • Ideal For Minimal Space
  • 12-Point Head And Flange
  • Zinc Plated For Protection
See More

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1605)

Engine Valve Cover Gasket Set

from

$25.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Die cut silicone rubber gaskets conform to out-of-flat covers
  • Great for on-again/off-again situations
  • Not intended for use in emission controlled vehicles.
See More

Edelbrock – Performer-Link Adjustable True-Roller Timing Chain Set (Part No.7810)

Performer-Link Adjustable True-Roller Timing Chain Set

from

$74.99


Product Features:
  • Solid Bushing Chain Resists Stretching
  • For Use with Stock or Edelbrock Camshafts
  • Stressproof Steel Crank Gears
  • 3 Keyway Setting Points To Ensure Accurate Timing
  • True Bearing Surface Rolls with the Sprockets
See More

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1886)

PERFORMANCE OIL PAN GASKET SET

from

$63.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Rigid core, molded silicone rubber gaskets utilize the one-piece molded rubber technology for a perfect fit, ease of installation and include compression limiters to prevent overtightening.
  • Not intended for use in emission controlled vehicles.
See More

FEL-PRO Performance – Engine Timing Cover Gasket (Part No.2335)

Engine Timing Cover Gasket

from

$20.29
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Steel core gasket construction
  • Exclusive design permits significantly faster gasket installation while eliminating potential sealing leak paths.
  • Not intended for use in emission controlled vehicles.
See More

Edelbrock – Sure Seat Valve Springs for Big-Block Chevy 396-402-427-454 V8 (Part No.5862)

Sure Seat Valve Springs for Big-Block Chevy 396-402-427-454 V8

from

$80.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • For Use With Cast Iron Heads
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Use with Original Equipment Heads Only
See More

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1047)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

from

$72.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
  • NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
  • SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
  • STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Competition Cams – Set of 16 Single Springs w/ 1.254" O.D., 1.254" I.D., 1.700" Installed Height (Part No.981-16)

Set of 16 Single Springs w/ 1.254" O.D., 1.254" I.D., 1.700" Installed Height

from

$126.99
Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. Selecting the right metal stock and creating the best design is not done by chance. COMP Cams has developed a process that creates the highest quality valve spring available. The result is a product that meets and exceeds the expectations of today’s engine builders and racers.

Product Features:
  • Seat pressure: 105 lbs. @ 1.700″, Open Pressure: 273 lbs. @ 1.250″
  • O.D.: 1.254″, I.D.: .880″
  • Single valve springs with damper
  • Approximately .490″ max lift at recommended installed height
See More

Mr. Gasket – Ultra Seal: Head Gasket (Part No.5799G)

Ultra Seal: Head Gasket

from

$68.99
Mr. Gasket Ultra-Seal Head Gaskets are a five layer (graphite core/perforated steel outer layers) composite construction. The graphite core has excellent thermoconductivity (transfers heat) away from hot spots in head preventing gasket burn-out. They provide excellent stability, compressibility and high temperature endurance. A high temperature silicone coating ensures sealing of engine fluids. Compatible with cast iron or aluminum heads, they will not brinell (indent) aluminum cylinder heads. Suitable for high performance street, drag race and oval track use. Sold individually.brbrGasket Bore 4.130 inch, Compressed thickness 0.055 inch

Product Features:
  • Five layer (graphite core/perforated steel outer layers) composite construction
  • Graphite core is excellent transfering heat away from hot spots in head preventing gasket burn-out.
  • Provides excellent stability, compressibility and high temperature endurance
  • Coated with high temperature silicone to ensure sealing of engine fluids
  • Will not brinell (indent) aluminum cylinder heads
  • For high performance street, drag race and oval track use
  • Compatible w/High Octane Fuel
  • Compatible With Exotic Fuel
See More

Mr. Gasket – Ultra Seal: Oil Pan Gasket (Part No.5885)

Ultra Seal: Oil Pan Gasket

from

$42.49
Manufactured from cellulose/nitrile composition gasket material. A black latex rubber coating is applied to outside of gasket to help seal minor oil pan rail irregularities and eliminate the possibility of oil leakage. Provides excellent sealing and durability. Complete with molded rubber front/rear oil pan seals. For original equipment replacement, high performance street, drag race and oval track.

Product Features:
  • Manufactured from cellulose/nitrile rubber composition gasket material
  • Provides excellent sealing and durability
  • Complete with molded rubber front/rear oil pan end seals where applicable
  • For OE replacement, high performance street, drag race and oval track use
  • Graphite Non-Wicking Rubber
  • No Cork Particles
  • Easy Removal For Disassembly
See More

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2919)

Engine Crankshaft Seal Kit

from

$37.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
  • Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
  • Not intended for use in emission controlled vehicles.
See More

Edelbrock – Pushrod Set for S/B Chevy (Part No.9629)

Pushrod Set for S/B Chevy

from

$187.99


Product Features:
  • Case-Hardened Tubing
  • Surface Hardening
  • Welded Ends
  • 0.3125 in. Diameter
  • Use with or without Hardened Steel Guideplates
See More

Mr. Gasket – Ultra Seal: Competition Screw-In Rocker Arm Studs (Part No.1075)

Ultra Seal: Competition Screw-In Rocker Arm Studs

from

$94.99
Mr. Gasket competition screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street and race applications.

Product Features:
  • Black Oxide Coated Grade 8 Steel
  • Kit Contains 16 Studs
  • Easy To Install
  • Heat Treated Steel
  • Prevents Stud Flexing
  • Black Plated Finish
See More

Mr. Gasket – Ultra Seal: Screw-In Rocker Arm Studs (Part No.1076)

Ultra Seal: Screw-In Rocker Arm Studs

from

$65.99
Mr. Gasket screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street applications. OE style press in rocker studs can actually pull out of the cylinder head when using high lift camshafts. Includes sixteen studs 3/8-24 x 1.47 inch long top x 7/16-14 bottom.

Product Features:
  • Black Oxide Coated Grade 8 Steel
  • Kit Contains 16 Studs
  • Easy To Install
  • Heat Treated Steel
  • Grade 8 Steel
See More

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2920)

Engine Crankshaft Seal Kit

from

$34.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Application specific design to ensure a perfect fit
  • Meets or exceeds all original equipment specifications
  • Engineered and manufactured specifically for repair applications
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Mr. Gasket – Timing Cover Seal (Part No.17)

Timing Cover Seal

from

$30.19
If you are changing your camshaft or replacing the timing set, make sure to replace this seal at the same time! Made from Nitrile rubber.

Product Features:
  • Nitrile Rubber And High Density Cork
  • Will Not Shrink Or Stick
See More

Competition Cams – Thumpr 243/257 Hydraulic Flat Cam and Lifter Kit for Chevrolet Big Block 396-454 (Part No.CL11-602-4)

Thumpr 243/257 Hydraulic Flat Cam and Lifter Kit for Chevrolet Big Block 396-454

from

$1322.99
BIG BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.

Product Features:
  • Cam and lifter kit for Big Block Chevy engines
  • CL-Kit includes cam, lifters, assembly lube, instructions and decals
  • HYDRAULIC – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.
  • 295/312 Advertised Duration, 243/257 Duration @ .050″, .522″/.507″ Lift, 107 Lobe Separation
  • Valve spring upgrade required
See More

Edelbrock – XX Performer Big-Block Chevy Oval Port Hydraulic Flat Tappet Cam Polished (Part No.604919)

XX Performer Big-Block Chevy Oval Port Hydraulic Flat Tappet Cam Polished

from

$1084.99
The Edelbrock #604919 Performer Bare High Compression Cylinder Heads are designed for Big-Block Chevy Oval Port V8 applications. These Edelbrock Performer Series Cylinder heads are 50-state street legal and provide outstanding performance from Idle-5,500

Product Features:
  • High Compression
  • 100cc Combustion Chamber Volume
  • 290cc Intake/110cc Exhaust Runner Volume
  • 2.19 in. Intake/1.88 in. Exhaust Valve Diameter
  • 0.562 in. Deck Thickness
See More

Edelbrock – Performer Small-Block Chevy Cylinder Head Hydraulic Flat Tappet Cam (Part No.60859)

Performer Small-Block Chevy Cylinder Head Hydraulic Flat Tappet Cam

from

$1028.99
Product Features:
  • Designed for 1987-95 Throttle Body Injection or Tuned Port Injection 5.7L Small-Block Chevy engines originally equipped with center bolt valve covers
  • Flat Tappet Camshaft Type
  • 60cc chambers with 165cc intake ports
  • Size of intake valve is 2.02 in. and exhaust valve is 1.60 in.
  • Sold as one complete head
See More

Edelbrock – Performer Big-Block Chevy Oval Port Hydraulic Flat Tappet Springs (Part No.60489)

Performer Big-Block Chevy Oval Port Hydraulic Flat Tappet Springs

from

$830.99
Product Features:
  • Made of aluminum with a natural finish
  • 100cc chambers with 290cc intake ports
  • 2.19 in. intake and 1.88 in. exhaust valves
  • Bare Cylinder Head
  • Standard intake and exhaust port location
See More

Weiand – Stealth Ram; Intake Manifold (Part No.7540)

Stealth Ram; Intake Manifold

from

$704.99


Product Features:
  • Great For Street Machines/Street Rods/Muscle Cars
  • Two Piece Design
  • Individual D-Shaped Runners
  • Optimized For Broad Power Range/Large Plenum Area
  • Can Be Used For Blow-Through Superchargers
  • Fully CNC Machined For A Perfect Fit
  • No Exhaust Crossover
See More

Edelbrock – Engine Cylinder Head (Part No.60849)

Engine Cylinder Head

from

$605.99


Product Features:
  • 50-State Street Legal Aluminum Cylinder Head
  • Out-of-the-Box Bolt-On Performance
  • Hand-Blended Intake and Exhaust Bowls
  • CNC-Matched Intake/Exhaust Ports in Std Location
  • Thicker Deck Surfaces than Other Brands
  • Hardened Tip Stainless Swirl-Polished Valves
  • Heli-Coils Rocker Studs And Exhaust Bolt Holes
See More

Competition Cams – Thumpr 227/241 Hydraulic Flat Cam (Part No.11-600-4)

Thumpr 227/241 Hydraulic Flat Cam

from

$542.99
HYDRAULIC – Thumpr: High performance street, stock converter ok, best with 2000+ converter and gears. Choppy/thumping idle.

Product Features:
  • HYDRAULIC – Thumpr: High performance street, stock converter ok, best with 2000+ converter and gears. Choppy/thumping idle.
  • 279/296 Advertised Duration, 227/241 Duration @ .050″, .498″/.483″ Lift, 107 Lobe Separation
  • Valve spring upgrade required
See More

Holley – Manifold; SBC Late DP TBI EGR (Part No.300-66)

Manifold; SBC Late DP TBI EGR

from

$463.99
Utilizes late model alternator and A/C bracket mounting provisions. Has vacuum taps off Manifold runners. Uses cable bracket P/N 20-101 for GM 700R4 transmission. Extra installation hardware included.

Product Features:
  • High Rise Dual Plane Design
  • Holley Pro-Jection Tbi Mounting Flange
  • Erg Provisions
See More

Weiand – Stealth; Intake Manifold (Part No.8018)

Stealth; Intake Manifold

from

$394.99


Product Features:
  • High Rise/Dual Plane Design For Maximum Torque
  • Fully CNC Machined For A Perfect Fit
  • Square Bore Carburetor Flange
  • Exhaust Crossover For Improved Street Drivability
  • Permanent Mold Casting Process
  • Lighter/Smoother/Better Looking
  • More Consistent Castings
See More

Weiand – Stealth; Intake Manifold (Part No.8150P)

Stealth; Intake Manifold

from

$371.99


Product Features:
  • High Rise/Dual Plane Design For Maximum Torque
  • Fully CNC Machined For A Perfect Fit
  • Square Bore Carburetor Flange
  • Exhaust Crossover For Improved Street Drivability
  • Permanent Mold Casting Process
  • Lighter/Smoother/Better Looking
  • More Consistent Castings
See More

Edelbrock – Water Pump for 1988 and later C/K pickups in Satin Finish (Part No.8853)

Water Pump for 1988 and later C/K pickups in Satin Finish

from

$323.99
Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in one direction for optimum efficiency. In the early days of the automotive performance industry, you either ran what was available, or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.

Product Features:
  • Maximum Cooling for Street and Racing Engines
  • Internal Passages Are Balanced for Maximum Flow
  • Impeller is Larger than Others For Max Pressure
  • Impeller Vanes Dramatically Increase Flow Rates
  • Equal Distribution to Both Sides of Block
  • Only Flows in One-Direction for Optimum Efficiency
See More

Edelbrock – Water Pump for Street Rods in Satin Finish (Part No.8854)

Water Pump for Street Rods in Satin Finish

from

$309.99
Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in one direction for optimum efficiency. In the early days of the automotive performance industry, you either ran what was available, or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.

Product Features:
  • Maximum Cooling for Street and Racing Engines
  • Internal Passages Are Balanced for Maximum Flow
  • Impeller is Larger than Others For Max Pressure
  • Impeller Vanes Dramatically Increase Flow Rates
  • Equal Distribution to Both Sides of Block
  • Only Flows in One-Direction for Optimum Efficiency
See More

Top Picks for 1995 GMC C3500 Performance Ignition Products

Upgrade GMC C3500s with top-quality Performance Ignition Products parts, including 9 OEM and aftermarket selections for your 1995 model.

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

MSD Ignition – Coil; GM External HEI Coil; High Performance (Part No.8226)

Coil; GM External HEI Coil; High Performance

from

$71.99
Top off your GM ignition system with these great new replacement coils. The GM coils have MSD performance in factory style housings. MSD designed these coils by combining our blaster coil experience with e-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The coils will work with stock ignition systems as well as MSD equipped cars and trucks. Installation tip: If you plan to install an MSD ignition with your GM dual connector coil, use PN 8876 harness for a direct plug-in installation.

Product Features:
  • Direct performance replacement for GM dual connector coil
  • 100:1 Turns Ratio
  • Lower Primary Resistance Produces High Voltage Output
  • Works w/Stock Ignition As Well As MSD Ignitions
See More

MSD Ignition – Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation (Part No.5526)

Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation

from

$65.99
These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.

Product Features:
  • Replacement Coil For GM Dual Connector Coil
  • Improved Turns Ratio
  • Lower Primary Resistance
  • Bolt-In replacement coil
  • Produce More Output Voltage
  • Smooth Idle
See More

Accel – 8Mm Super Stock Spiral Cust Bk (Part No.5114K)

8Mm Super Stock Spiral Cust Bk

from

$91.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:
  • 500 Ohms/ft Of Resistance
  • 550 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • High RFI Suppression For Street And Strip Use
  • Custom-fit Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
  • 7mm And 8mm High Gloss Silicone Jacket
See More

Accel – GM Ext. Coil 90-95 Ign Module (Part No.35370)

GM Ext. Coil 90-95 Ign Module

from

$158.99
This high performance ignition module provides your plugs with more spark over the stock module. The solid state electronics provide high coil out put and superior reliability. The Dwell control circuit ensures, long consistent coil charging. The current control circuit protects against coil over heating. This module fits most GM ignition systems with the externally mounted module. 1990 thru 1995.

Product Features:
  • Fits Most Stock And Modified Distributors
  • Dwell Control Circuit
  • Resists False Triggering
See More

Auto Ventshade (AVS) – Eclipse; Large Hood Scoops (Part No.80001)

Eclipse; Large Hood Scoops

from

$123.99
LUND is the first automotive accessory manufacturer to develop and offer comprehensive packages to customize and personalize trucks, SUVs, and vans. An American-based company and the creator of the wrap hood shield category through the invention of the Interceptor hood shield, LUND designs and manufactures the most stylish, high performance, and premium automotive accessories for trucks and SUVs. Product categories include: Interceptor hood protection, nerf bars, running boards, tonneau covers, exterior accessories, storage boxes, cargo management, and bed accessories.

Product Features:
  • Unique, stylized hood scoops for trucks and cars
  • Transform stock hood into a simulated performance hood
  • Can easily be painted to match any factory color
See More

Mallory – Distributor Wiring Harness (Part No.29349)

Distributor Wiring Harness

from

$30.49


Product Features:
  • Service Part
  • Makes Connections Quick And Easy
See More

MSD Ignition – Crank Trigger Kit; Small Block Chevy; 6? Balancer (Part No.8600)

Crank Trigger Kit; Small Block Chevy; 6? Balancer

from

$461.99
For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

Product Features:
  • 6.25 in. Diameter
  • Absolutely the most accurate way to trigger the ignition.
  • The non-magnetic pickup cannot be false triggered.
  • Powerful magnets are embedded in a billet aluminum trigger wheel.
See More

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Promaster Classic Series; Ignition Coil

from

$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:
  • Glass Filled Polyester Case
  • Longer Spark Duration
  • Increased Performance
  • No Energy Loss Due To Arcing
  • Includes Brass Contact Terminal
See More

In-Demand Performance Exhaust Products for 1995 GMC C3500s

Select from 15 premium Performance Exhaust Products parts for your 1995 GMC C3500, with prices ranging from $20.99 to $185.99.

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1444)

Exhaust Manifold Gasket Set

from

$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More

Flowtech – Real-Seal; Header Gasket (Part No.99150AFLT)

Real-Seal; Header Gasket

from

$85.39


Product Features:
  • Water/Weather Resistant
  • Re-Useable
  • Will Not Burn Or Blow Out
  • Suitable For Port-Matching
  • Made In USA
See More

Mr. Gasket – Performance Exhaust Gasket Set for Enhanced Sealing and Durability (Part No.150B)

Performance Exhaust Gasket Set for Enhanced Sealing and Durability

from

$20.99
Mr. Gasket Performance exhaust gasket material is a heavy duty material, .062 inch thick, consisting of an acrylic binder system to resist high temperature. This material is made for sealing exhaust applications. Provides excellent sealing and durability.

Product Features:
  • Manufactured from high-temperature acrylic blend exhaust material
  • Provides excellent sealing and durability
  • Can be trimmed if necessary for modified port applications
  • For OE replacement, high performance street, drag race and oval track use
  • Resists Deteriorating
  • Provides Excellent Torque Retention
See More

Mr. Gasket – Aluminum Exhaust Gaskets for Intense Heat Resistance (Part No.7402G)

Aluminum Exhaust Gaskets for Intense Heat Resistance

from

$42.99
Upgrade to Mr. Gasket Aluminum Layered Header Gaskets and eliminate blown exhaust gaskets forever. They conform to warped and damaged surfaces to create an airtight, leak-proof seal and will not shrink or deteriorate EVER.

Product Features:
  • Withstands Intense Exhaust Heat
  • Reusable header, exhaust manifold and collector flange gaskets
  • Manufactured from “dead soft” aluminum layers – .125″ thick
  • Easy Removal For Disassembly
  • Conforms easily to surface irregularities (warped flanges)
  • Compresses down to 0.060″ to create a tight leak-proof seal
  • Will not shrink, deteriorate, or blow out- eliminating gasket leaks
  • For high performance street, drag race and oval track use
See More

Mr. Gasket – Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal (Part No.7401G)

Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal

from

$42.99
Upgrade to Mr. Gasket Aluminum Layered Header Gaskets and eliminate blown exhaust gaskets forever. They conform to warped and damaged surfaces to create an airtight, leak-proof seal and will not shrink or deteriorate EVER.

Product Features:
  • Withstands Intense Exhaust Heat
  • Reusable header, exhaust manifold and collector flange gaskets
  • Resists Deteriorating
  • Manufactured from “dead soft” aluminum layers – .125″ thick
  • Easy Removal For Disassembly
  • Conforms easily to surface irregularities (warped flanges)
  • Compresses down to 0.060″ to create a tight leak-proof seal
  • Will not shrink, deteriorate, or blow out- eliminating gasket leaks
  • For high performance street, drag race and oval track use
See More

Mr. Gasket – Exhaust Gasket Set (Part No.150)

Exhaust Gasket Set

from

$30.19
Manufactured from high-temperature composite exhaust material. Provides maximum torque retention to eliminate gasket failure. Can be trimmed if necessary for modified port applications. Precision die cut for an excellent fit. For OE replacement, high-performance street, drag race and oval track.

Product Features:
  • High-Temperature Exhaust Material
  • Withstands Extreme Exhaust Heat
  • Provides Excellent Sealing And Durability
  • Superior Tensile Strength
  • Resists Deteriorating
  • Provides Excellent Torque Retention
See More

Hooker Headers – Super Competition Header Gasket (Part No.10809HKR)

Super Competition Header Gasket

from

$23.29
Hooker’s precision-matched Super Competition header gaskets provide a sure fit and unmatched exhaust sealing. This OEM quality gasket is constructed of a thick ,.060 inch, high temperature, non-asbestos fiber laminate with a perforated steel core, which provides a superior grip and adhesion. This construction also contributes to exact fit compliance between the cylinder head and header flange, offering excellent sealing properties during extreme temperature and operating conditions.

Product Features:
  • Tear Resistant
  • Precisely Cut To Match Header
See More

Flowmaster Inc. – Super 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.953048)

Super 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound

from

$133.99
The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1411)

Exhaust Manifold Gasket Set

from

$42.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1410)

Exhaust Manifold Gasket Set

from

$37.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More

Flowmaster Inc. – 50 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 17in long, Non-Reversible, Moderate Sound (Part No.53058)

50 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 17in long, Non-Reversible, Moderate Sound

from

$185.99
The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Spectre – Alternator Bracket (Part No.4719)

Alternator Bracket

from

$30.99
This Spectre Alternator Bracket is an upper mount designed to fit 1969 and later Chevrolet Big Block engines with a long water pump. Featuring a triple chrome-plated finish and high quality steel construction, this part is an OEM replacement that mounts on the passenger’s side.

Product Features:
  • Fits Big Block Chevy engines with a long water pump from 1969 and later
  • Manufactured from high quality steel
  • Upper bracket for passenger side mounting
  • Features a triple chrome-plated finish
  • Stock replacement part
See More

Flowtech – Real-Seal; Header Gasket (Part No.99153FLT)

Real-Seal; Header Gasket

from

$85.39


Product Features:
  • Water/Weather Resistant
  • Re-Useable
  • Will Not Burn Or Blow Out
  • Suitable For Port-Matching
  • Made In USA
See More

Mr. Gasket – Copper Seal; Exhaust Gasket Set (Part No.7151)

Copper Seal; Exhaust Gasket Set

from

$60.29
Copperseal exhaust gaskets are unique gaskets made from .043 inch solid copper. They feature an embossed O-ring design for a leak proof seal. They won’t shrink, deteriorate or blowout. Header bolts stay tight. Ideal for motor homes and towing.

Product Features:
  • Will Not Shrink/Deteriorate
  • Creates A Tight Leak Proof Seal
  • Helps Lower Under hood Temps
  • Seals Irregular Surfaces
  • Seals Slightly Damaged Surface
  • Ideal For Tow Vehicles
  • Ideal For Motor Homes
See More

Mr. Gasket – Copper Seal; Exhaust Gasket Set (Part No.7150)

Copper Seal; Exhaust Gasket Set

from

$59.99
Copperseal exhaust gaskets are unique gaskets made from .043 inch solid copper. They feature an embossed O-ring design for a leak proof seal. They won’t shrink, deteriorate or blowout. Header bolts stay tight. Ideal for motor homes and towing.

Product Features:
  • Will Not Shrink/Deteriorate
  • Creates A Tight Leak Proof Seal
  • Helps Lower Under hood Temps
  • Seals Irregular Surfaces
  • Seals Slightly Damaged Surface
  • Ideal For Tow Vehicles
  • Ideal For Motor Homes
See More

Most Sold 1995 GMC C3500 Performance Distributors

Explore our best-selling GMC parts for the 1995 C3500 among 5 OEM and aftermarket options starting from $49.49.

Accel – Tst GM 87-95 5.0/5.7L Tbi (Part No.TST4HP)

Tst GM 87-95 5.0/5.7L Tbi

from

$241.99
Everything you need to Super Tune Up your truck, van, or Jeep engine! The kits includes a high performance cap and rotor. A set of 8mm Extreme 9000 Spiral Core wires. This kit also includes the ACCEL classic copper core spark plugs to fire your engine up.

Product Features:
  • Includes Everything Needed
  • Resistance High Dielectric Strength Compounds
  • Race Proven
  • Improved Performance
  • Reduced Emissions
See More

MSD Ignition – High-Performance Distributor Cap & Rotor Replacement Kit (Part No.8406)

High-Performance Distributor Cap & Rotor Replacement Kit

from

$49.49
The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.

Product Features:
  • Fits stock distributor
  • High quality material
  • Brass terminals
  • High dielectric properties
See More

Accel – Dist:Chev V8 Hei Vac W/Coil (Part No.59107C)

Dist:Chev V8 Hei Vac W/Coil

from

$210.99
Performance Replacement HEI Distributor, direct plug-in with OE type connectors, GM HEI equipped Cars, Trucks (Pre-Computer). High dielectric strength cap, brass male towers. ACCEL Performance Replacement Distributors are the perfect choice for your daily driver or street machine. Using all new components, these distributors feature High-performance ACCEL Electronics. All new components-housings are either new castings or turned from billet stock, centerless ground shaft with oil lite bushings. High dielectric strength cap, balanced rotor. Male tower distributor cap with brass cap and rotor contacts (Ford and AMC Models feature screw-mounted wire retainer for the ultimate plug wire retention). Iron or steel distributor gear. Direct plug-in replacement with factory-type connectors for plug and play installation.

Product Features:
  • Direct Plug In Factory Replacement Plug And Play
  • CNC Machined 6061 T6 Billet Aluminum Housing
  • High Dielectric Strenght Thermoplastic Cap With Br
  • 4 Topin Module With Dwell Control Triggers At 75 R
  • Easy Access Fully Adjustable Mechanical Advance
  • Adjustable Vacuum Advance
  • Includes Performance Coil
  • Fit non computerized vehicles
See More

Accel – Tst GM 87-95 5.0/5.7L Tbi (Part No.TST4)

Tst GM 87-95 5.0/5.7L Tbi

from

$224.99
Everything you need to Super Tune Up your truck, van, or Jeep engine! The kits includes a high performance cap and rotor. A set of 8mm Extreme 9000 Spiral Core wires. This kit also includes the ACCEL classic copper core spark plugs to fire your engine up.

Product Features:
  • Complete Super Tune Kit
  • 8mm Spiral Core Wires
  • Accel Classic Core Plugs
  • High Performance Cap And Rotor
  • Reduced Emissions
See More

MSD Ignition – Distributor; Chevy V8 with Internal Module (Part No.8360)

Distributor; Chevy V8 with Internal Module

from

$469.99
The Pro-Billet Ready-to-Run distributor is the perfect upgrade for outdated points distributors or bulky HEI. Simply install the distributor in the engine, connect three wires, the coil and fire it up! A maintenance-free magnetic pick-up accurately triggers the module. The increased output of the amplifier easily outperforms stock ignitions and will smooth out the engine’s idle, improve starting and provide a much higher RPM range. The Ready-to-Run features MSD’s adjustable mechanical advance which allows you to custom tailor an ignition curve to match your engine’s needs. There is also a vacuum advance canister to help improve economy. For positive street performance, the Ready-to-Run is the best choice.

Product Features:
  • Simple and clean three wire installation
  • Supplied w/An HEI Style Distributor Cap And Rotor
  • Accepts Cap-A-Dapts
  • Does not require an MSD Ignition Control
  • CARB E.O. Approved
  • Now includes built-in Rev Limiter
  • O-ring seals can be installed for oil press. control (Mods only)
  • Special oil tract improves lubrication to the dist./cam gear
See More

Top-Rated Performance and Racing Products Brands For Your 1995 GMC C3500

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1995 GMC C3500s. Below you’ll find some of our best rated Performance and Racing Products from Mr. Gasket, Energy Suspension, and FEL-PRO Performance, and more. Performance and Racing Products from these brands that fit a 1995 C3500 start at just $9.99 and are rated as high as 4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular Mr. Gasket 1995 GMC C3500 Performance and Racing Products

When it comes to maintaining or upgrading your 1995 GMC C3500, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Mr. Gasket ticks all of those boxes. We offer a wide selection of Mr. Gasket Performance and Racing Products, specifically designed for the 1995 GMC C3500. With over 27 Mr. Gasket brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $10.49, with an average price of just $42.64. Plus, with over 21 customer reviews and an average rating of 4 stars, you can trust that our Mr. Gasket Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Oil Pan Bolt Kit
from
$17.49
This product is not rated

Oil Pan Bolt Kit

“”

Thermocap Radiator Cap
from
$48.09
This product is not rated

Thermocap Radiator Cap

“”

Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal
from
$42.99
This product is not rated

Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal

“”

Popular Energy Suspension 1995 GMC C3500 Performance and Racing Products

Energy Suspension auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1995 GMC C3500 owner should feel confident when installing genuine Energy Suspension parts in their vehicle. To ensure the best fit and performance for your 1995 C3500, Advance Auto Parts carries a full inventory of 11 Energy Suspension Performance and Racing Products. Plus you will be keeping your GMC in peak condition while saving money because prices on these Energy Suspension Performance and Racing Products range from $9.99 to $395.99, plus, with more than 20 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

Motor Mount
from
$46.99
This product is not rated

Motor Mount

“”

Shock Bushing Set
from
$10.99
This product is not rated

Shock Bushing Set

“”

Leaf Spring Bushing Set
from
$91.99
This product is not rated

Leaf Spring Bushing Set

“”

FAQs for 1995 GMC C3500 Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1995 GMC C3500s?

Out of 138 Performance and Racing Products that fit 1995 GMC C3500s, the following parts are the top sellers:

What’s the price range for 1995 GMC C3500 Performance and Racing Products?

Performance and Racing Product prices for the 1995 GMC C3500 start at $9.99 and go up to $1,322.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1995 GMC C3500?

The average price for Performance and Racing Products for the 1995 GMC C3500 is $179.03. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other GMC C3500 model years?

Yes, we currently carry Performance and Racing Products for 19 model years of GMC C3500s between 1979 and 1999. Performance and Racing Products are bought most frequently for the following model years: 1999, 1998, 1997, 1996, 1994, 1993, 1992, 1991, and 1990.

What are the cheapest Performance and Racing Products for my 1995 GMC C3500?

The cheapest 1995 GMC C3500 Performance and Racing Products we carry in stock are:

What are the top-rated Performance and Racing Products that fit the 1995 GMC C3500?

Out of 328 reviews by customers, our 1995 GMC C3500 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1995 GMC C3500 and their top-rated products:

What types of Performance and Racing Products do you sell for my 1995 GMC C3500?

As of 2/5/25, these are some of the most in-demand types of Performance and Racing Products for a 1995 GMC C3500:

Can I get help with 1995 GMC C3500 Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Performance and Racing Products and more.

What is your return policy for GMC C3500 Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new GMC C3500 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.