1995 Dodge Ram 1500 Drive Shafts and Axles

More 1995 Dodge Ram 1500 Drive Shafts and Axles

Find your specific 1995 Dodge Ram 1500 original or aftermarket Drive Shafts and Axles below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1995 Dodge Ram 1500 Drive Shafts and Axles

Spicer – Axle Shft Univ Joint (Part No.5-3226X)

Axle Shft Univ Joint

from

$47.99
Axle Shft Univ Joint
View Product

Dorman – OE Solutions Axle Shaft Kit (Part No.K4005683753DOR)

OE Solutions Axle Shaft Kit

from

$413.54
Dorman’s Axle Shaft comes as a complete kit. Packaged with all the installation hardware essential for a complete repair, it provides time-saving convenience at an affordable price.

Product Features:
  • Comes assembled with U-Joints installed
  • Direct replacement for a proper fit every time
  • Durable steel construction for long-lasting performance
  • Vehicle try-on testing has been conducted on this part to ensure trouble-free performance
See More
View Product

Yukon Gear – Intermediate Shaft Bushing For Disconnect Dana 30 & 44 (Part No.18060)

Intermediate Shaft Bushing For Disconnect Dana 30 & 44

from

$21.99
Product Features:
  • Intermediate shaft bushing
  • Fits Dana Spicer 30 and 44 with disconnect axles
See More
View Product

Spartan – Drive Axle Assembly; Dodge 1500 RWD 94-99 Axle (Part No.RAX1755C)

Drive Axle Assembly; Dodge 1500 RWD 94-99 Axle

from

$1675.99
Remanufactured Rear Axle assemblies are completely disassembled, thoroughly cleaned and reassembled using new wear parts. Units are assembled, sealed & include backing plates, axle shafts & fluid.

Product Features:
  • Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
  • Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
  • Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio
See More
View Product

Dorman – Axle Spindle Nut (Part No.K4030222225DOR)

Axle Spindle Nut

from

$27.53
Dorman’s Spindle Nut is manufactured for high corrosion resistance and a long service life. Depending on the application, it is also available in a kit that includes the nut, washer, and retainer.

Product Features:
  • Direct replacement for a proper fit every time
  • High quality steel construction
  • Conveniently available in many styles and in packs of different quantities
  • Dorman’s Spindle Nuts are constructed to strict engineering quality standards
See More

(1 reviews)
View Product

Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.946-312)

Rear Drive Shaft: Greaseable, Adjustable

from

$1273.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More
View Product

Crown Auto Jeep Replacmnt – Black (Part No.52070427AB)

Black

from

$11.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Easy Installation
See More
View Product

National – Bearings (Part No.307-FFL5)

Bearings

from

$77.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More
View Product

Yukon Gear – Replacement Yoke For Dana 60 And 70 With A 1410 U/Joint Size (Part No.41030)

Replacement Yoke For Dana 60 And 70 With A 1410 U/Joint Size

from

$278.99
Yukon replacement yoke for Dana 60 and 70 with a 1410 U/joint size. 4.188″ snap ring span, 1.188″ cap diameter. Outside snap ring.This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 60, 70, 70U and 70HD
  • 29 spline
  • 1410 u-joint size
  • 4.188″ snap ring span
  • 1.188″ cap diameter
  • Outside snap ring design
  • Strap style
See More
View Product

Yukon Gear – Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 (Part No.30222)

Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50

from

$182.99
Replacement redi-sleeve yoke saver for Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 .Yukon Mighty seal.

Product Features:
  • Pinion Redi-sleeve
  • Fits Dana Spicer 25, 27, 30, 4 and 50
See More
View Product

Yukon Gear – Outer Stub Axle Nut Washer For Dodge Dana 44 & 60 (Part No.33491)

Outer Stub Axle Nut Washer For Dodge Dana 44 & 60

from

$7.99
Outer stub axle nut washer for Dodge Dana 44 & 60. This replaces Spicer part number 45523.

Product Features:
  • Outer stub axle nut washer for Dodge Dana 44 and 60
See More
View Product

NTN – Wheel Bearing (Part No.K8000345509NTN)

Wheel Bearing

from

$87.01
Wheel Bearing
View Product

Yukon Gear – Outer Stub Dust Shield For Chrysler 9.25" Front (Part No.33544)

Outer Stub Dust Shield For Chrysler 9.25" Front

from

$24.99
Product Features:
  • Outer stud dust shield
  • Fits Chrysler 9.25″ front
See More
View Product

Yukon Gear – R1559Tv Rear Axle Bearing And Seal Kit (Part No.10001)

R1559Tv Rear Axle Bearing And Seal Kit

from

$52.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1559TV axle bearing and seal kit, TorringtonBrand, 2.530″ OD, 1.620″ ID This axle bearing & seal kit services one side only.

Product Features:
  • Includes axle bearing and seal
  • Services one side
  • Torrington Brand
  • 2.530″ O.D.
  • 1.620″ I.D.
See More
View Product

Yukon Gear – Dana 60 Semi-Float C-Clip (Part No.33247)

Dana 60 Semi-Float C-Clip

from

$14.99
Dana 60 semi-float C-clip.

Product Features:
  • C-clip
  • Fits Dana Spicer 60
See More
View Product

Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-988)

Drive Shaft Repair Kit - Only Fits Dorman Driveshafts

from

$51.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More
View Product

Crown Auto Jeep Replacmnt – For Use With Dana 30, With Vacuum Diaphragm/ Gasket/ Hardware (Part No.4506116)

For Use With Dana 30, With Vacuum Diaphragm/ Gasket/ Hardware

from

$99.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Manufactured From High Quality Material
  • Engineered To The Specifications
  • Meets The Quality Standards
  • Designed For Performance And Durability
  • Easy To Install
See More
View Product

National – Multi Purpose Bearing (Part No.HB-88530)

Multi Purpose Bearing

from

$144.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More
View Product

Driveworks – Oil Seal (Part No.S-5131)

Oil Seal

from

$9.79
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More
View Product

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More
View Product

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6065)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$96.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to DODGE 94-03;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1994-2003
  • Weight approx: 4 Lbs
  • BEARING ID / BORE: 1.5750 INCH / 40 MM
  • CENTERLINE: 2.28 INCH / 58 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • INVERTED THREADED HOLE MOUNT
  • THREADS: 7/16 – 14
See More
View Product

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6109)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$121.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to DODGE 06-10; RAM 11-11;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 2006-2011
  • Weight approx: 3 Lbs
  • BEARING ID / BORE: 1.5750 INCH / 40 MM
  • CENTERLINE: 2.00 INCH / 51 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • STYLE: ROUND FRAME
  • WITH WINGS
  • WITHOUT STUDS
  • COLLAR FACES TRANSFER CASE
See More
View Product

National – Bearings (Part No.A-5)

Bearings

from

$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

(39 reviews)
View Product

National – Wheel Bearing: Direct Fit, 1 Piece (Part No.R-1561-TV)

Wheel Bearing: Direct Fit, 1 Piece

from

$52.99
Manufactured with premium-grade steel, National cylindrical bearings are designed and engineered to meet OE specifications.

Product Features:
  • STRONG AND DURABLE — Controlled heat treatment process for strength and durability
  • PREMIUM MATERIALS — Precision manufactured using premium-grade steel for durability and performance
  • OE-STYLE DESIGN — Engineered to meet OE specifications
  • COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
  • Professional technicians know they can depend on National
See More

(20 reviews)
View Product

Yukon Gear – Replacement Axle For Dodge Dana 44, 6.77", 33 Spline Outer Stub, With ABS Ring, 94 & Up (Part No.21154)

Replacement Axle For Dodge Dana 44, 6.77", 33 Spline Outer Stub, With ABS Ring, 94 & Up

from

$221.99
Yukon replacement axle for Dodge Dana 44, 6.77″, 33 spline outer stub, W/ABS ring, 94 & up. Yukon front axles come with a one year warranty against manufacturing defects.

Product Features:
  • Fits 1994-1999 Dodge one ton front with vacuum disconnect
  • Outer stub
  • 33 spline
  • 6.77″ from end of splines to center of u-joint bore
  • Includes ABS ring
See More
View Product

Yukon Gear – 4340 Outer Stub For Dana 44, Dodge Disconnect Front With A Length Of 6.77" And 33 Splines (Part No.21685)

4340 Outer Stub For Dana 44, Dodge Disconnect Front With A Length Of 6.77" And 33 Splines

from

$267.99
Yukon 4340 Chrome-Moly replacement outer stub for Dana 44, Dodge disconnect front with a length of 6.77″ and 33 splines. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

Product Features:
  • 33 spline
  • 6.77″ long
  • Fits Dana Spicer 44 in 1994 and up Dodge
  • Outer stub
  • 5-760X U-joint size
  • 4340 Chromoly
See More
View Product

Dorman – Rear Axle Differential Vent (Part No.924-263)

Rear Axle Differential Vent

from

$9.49
This axle vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this axle vent is designed to match the fit and function of the original vent on specified vehicles
  • Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

(6 reviews)
View Product

Popular 1995 Dodge Ram 1500 Drive Shafts and Axles Categories

Axle Shaft Universal Joints
Axle Shaft Universal Joints
Drive Shaft and Axles
Drive Shaft and Axles
Drive Shaft Center Supports
Drive Shaft Center Supports
Center Support Bearings
Center Support Bearings
Axle Shaft Bearing Assemblies
Axle Shaft Bearing Assemblies
Drive and Prop Shaft Assemblies
Drive and Prop Shaft Assemblies
Bearing Pullers
Bearing Pullers
Drive Shaft Bearings
Drive Shaft Bearings
Axle Shaft Seals
Axle Shaft Seals
Drive Shaft Slip Yoke Sleeves
Drive Shaft Slip Yoke Sleeves
Axle Shaft Bearings
Axle Shaft Bearings
Axle Vents
Axle Vents
Rear Axle Shaft Bearings
Rear Axle Shaft Bearings
Stub Axles
Stub Axles
Drive Shaft Repair Kits
Drive Shaft Repair Kits
Axle Nuts
Axle Nuts
Stub Axle Seals
Stub Axle Seals
Axle Support Bushings
Axle Support Bushings
Axle Shaft Seal Retainers
Axle Shaft Seal Retainers
Axle Dust Shields
Axle Dust Shields
Drive Axle Assemblies
Drive Axle Assemblies
Axle Nut Thrust Washers
Axle Nut Thrust Washers
Axle Pinion Repair Sleeves
Axle Pinion Repair Sleeves
Axle Hub Vacuum Disconnects
Axle Hub Vacuum Disconnects

1995 Dodge Ram 1500 Drive Shafts and Axles

Maybe you’re in the middle of a full rebuild of that 1995 Dodge Ram 1500. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 75 different Drive Shafts and Axles in our inventory ranging from $4.49 to $1,781.99. That means you can find the exact parts or products you need to keep that 1995 Dodge Ram 1500 running smoothly.

Drive Shafts and Axles are only as good as their brand. We stock 16 different brands to make sure you have plenty of trusted parts to choose from for your 1995 Dodge Ram 1500. National, Spicer, and Anchor are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Drive Shafts and Axles for your 1995 Dodge Ram 1500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 880 reviews in this category, some of the top rated parts include Drive Axle Assembly; Dodge 1500 4WD 94-99 Axle with 4.5 stars and Wheel Bearing: Direct Fit, 1 Piece with 4.4 stars.

So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 1995 Dodge Ram 1500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Drive Shafts and Axles Brands To Make Your 1995 Dodge Ram 1500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1995 Dodge Ram 1500 demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your Ram 1500 the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.

Popular Dorman Drive Shafts and Axles

We carry Dorman parts in our stock across Axle Vents categories, plus more. For a 1995 Dodge Ram 1500, our most popular Dorman Drive Shafts and Axles include:
Rear Axle Differential Vent
from $9.49
(6)
Rear Axle Differential Vent
Axle Vents

Top 1995 Dodge Ram 1500 Drive Shafts and Axles from National

National products are another trusted brand when it comes to Drive Shafts and Axles for your 1995 Dodge Ram 1500. Popular National parts include:
Bearings
from $16.99
(39)
Bearings
Axle Shaft Bearings
Multi Purpose Bearing
from $44.99
(25)
Multi Purpose Bearing
Drive Shaft Center Supports
Multi Purpose Seal
from $14.99
(20)
Multi Purpose Seal
Axle Shaft Seals

FAQs for 1995 Dodge Ram 1500 Drive Shafts and Axles

What are the most purchased Drive Shafts and Axles for the 1995 Dodge Ram 1500?

Out of 75 Drive Shafts and Axles for the 1995 Dodge Ram 1500, the most popular in our inventory are:
Multi Purpose Seal
from $10.99
(19)
Multi Purpose Seal
Axle Shaft Seals
Universal Joint
from $51.99
(7)
Universal Joint
Axle Shaft Universal Joints
Universal Joint
from $40.99
(10)
Universal Joint
Axle Shaft Universal Joints

What are the top-rated 1995 Dodge Ram 1500 Drive Shafts and Axles?

Top-rated Drive Shafts and Axles for your 1995 Dodge Ram 1500 based on customer reviews/ratings are:
Drive Axle Assembly; Dodge 1500 4WD 94-99 Axle
from $1712.99
(39)
Drive Axle Assembly; Dodge 1500 4WD 94-99 Axle
“Very easy to install. Better grabbing points for a wrench to use while installing or removing. then the factory part. After doing one, the next side t”
Wheel Bearing: Direct Fit, 1 Piece
from $52.99
(20)
Wheel Bearing: Direct Fit, 1 Piece
“USA made”
Center Support Bearing Motor Mount: Center, 1 Piece
from $22.79
(13)
Center Support Bearing Motor Mount: Center, 1 Piece
“to high”

More Popular Parts for All Makes