1995 Chevrolet K3500 Ignition Coils and Boots
More 1995 Chevrolet K3500 Ignition Coils and Boots
Find your specific 1995 Chevrolet K3500 original or aftermarket Ignition Coils and Boots below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1995 Chevrolet K3500 Ignition Coils and Boots
Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1023)
from
$33.99
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle¿s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Long service life and durable performance
- High dielectric strength for reliability
- Corrosion-resistant connections
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
- High reliability
- Long service life
MSD Ignition – Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation (Part No.5526)
from
$65.99
These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.
Product Features:
See More
Product Features:
- Replacement Coil For GM Dual Connector Coil
- Improved Turns Ratio
- Lower Primary Resistance
- Bolt-In replacement coil
- Produce More Output Voltage
- Smooth Idle
ACDelco – Ignition Coil (Part No.D577)
from
$71.99
An ACDelco GM Original Equipment Ignition Coil is a GM-recommended replacement for your vehicle’s original component, and undergoes more stringent testing than aftermarket products. It increases electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco GM OE Ignition Coil uses pure copper windings to improve durability and provide higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This original equipment ignition coil has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
- Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
- Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48604)
from
$39.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience
Product Features:
See More
Product Features:
- OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
- OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
- EASE OF INSTALLATION: Includes mounting hardware and necessary components required for certain applications to ensure worry-free installation
- THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
- EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
- PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
Driveworks – Electronic Ignition Coil (Part No.26260)
from
$28.99
Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.
Product Features:
See More
Product Features:
- Direct-fit OE replacement ensures ease of installation
- Designed to meet OE performance
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1475)
from
$25.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Built by IATF 16949 certified manufacturers for consistent durability
- Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
- Segmented secondary bobbins to distribute high voltage and prevent shorting
- Extensive design validation testing to ensure long-lasting reliability
- 100% end-of-line tested to ensure proper performance
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Delphi – Ignition Coil (Part No.CE20003)
from
$39.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.
Product Features:
See More
Product Features:
- Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
- Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
- Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
- We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
MSD Ignition – Coil; GM; External Single Connector; 96-97 (Part No.8231)
from
$76.99
When it comes to late model performance parts, nothing beats bolt-on and direct connection components. These new bolt-in coils are designed with improved materials and windings to produce a stronger output. GM single connector coil PN 8231. Used on 1996 to 1999 General Motors vehicles. Installation tip: if you plan to install an MSD Ignition with this coil, use a PN 8877 harness for a direct plug-in installation.
Product Features:
See More
Product Features:
- Direct performance replacement coil for GM 1996-1999
- 80:1 turns ratio
- Lower Primary Resistance Produces High Voltage Output
- Works w/Stock Ignition As Well As MSD Ignitions
Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1037)
from
$21.99
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle¿s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Long service life and durable performance
- High dielectric strength for reliability
- Corrosion-resistant connections
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
- High reliability
- Long service life
MSD Ignition – Wire Set; Super Conductor; Chevy Tahoe; Sub. Vortec V8; 96-97 (Part No.32169)
from
$197.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.
Product Features:
See More
Product Features:
- Bolt-on Performance
- Custom Fit For Make And Model Listed
- Wires Are Pre-Cut To Exact Specifications
- Conductor core features DuPont Kevlar material for increased tensile strength
- Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
- Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-8119)
from
$44.99
Product Features:
See More
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
Accel – GM 5.0/5.7L Tbi Truck 95-87 (Part No.9020C)
from
$206.99
ACCEL now offers the cure for burnt spark plug boots with Extreme 9000 Ceramic wire kits. The 8mm Ferro-Spiral core wire now has ceramic boots on the spark plug end of the wires. Ceramic boots withstand up to 2,000 degrees. Great for running headers with close tolerances, an engine bay with little room, or an RV with boots that melt because of heat. Ultra high temperature double silicone construction wire rated at 600 degrees fahrenheit peak. 500 ohms/ft Ferro-Spiral core developed for performance use. Excellent energy delivery to the spark plugs, while providing the highest level of RFI/EMI suppression. Stainless steel spark plug terminals for maximum spark energy to the plugs. Pre-made to factory lengths for a perfect fit.
Product Features:
See More
Product Features:
- Ceramic boots withstand up to 2,000░ Fahrenheit
- Ceramic boots withstand up to 2,000° Fahrenheit
- 8mm double silicone construction black wire rated at 600░ F rated
- 8mm double silicone construction black wire rated at 600° F rated
- 500 Ohms/foot ferro sprial core offers the highest level of RFI/EMI suppression
- Universal and custom fit applications
ACDelco – Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core (Part No.9748G)
from
$158.99
ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Accel – 8Mm Super Stock Spiral Uni Bk (Part No.5040K)
from
$91.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.
Product Features:
See More
Product Features:
- 500 Ohms/ft Of Resistance
- 550 F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- High RFI Suppression For Street And Strip Use
- Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
- 8mm High Gloss Silicone Jacket
ACDelco – Spark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core, 9 Wire Set (Part No.9618V)
from
$82.99
ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
ACDelco – Spark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core (Part No.9718D)
from
$71.99
ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Carquest Premium – Spark Plug Wire Set (Part No.35-8120)
from
$36.99
CARQUEST Premium Spark Plug Wire Sets are engineered to restore ignition wire reliability and performance. They are designed to meet or exceed OE design requirements, performance, fit, form and function of the OE wire. Stainless steel magnetic winding del
Product Features:
See More
Product Features:
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
DENSO – Spark Plug Wire Set: Carbon Core, 9 Wire Set (Part No.671-8012)
from
$54.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to “click” into place for easy installation and a secure fit
- Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
Carquest Premium – Ignition Coil Connector (Part No.PTA1163)
from
$18.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Ignition Coil Connector (Part No.PTA1122)
from
$48.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Distributor Connector (Part No.FAA1133)
from
$54.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Ignition Coil Connector (Part No.PTA1162)
from
$22.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Popular 1995 Chevrolet K3500 Ignition Coils and Boots Categories
1995 Chevrolet K3500 Ignition Coils and Boots
Maybe you’re in the middle of a full rebuild of that 1995 Chevrolet K3500. Maybe you just need a couple of Ignition Coils and Boots. Either way, Advance Auto Parts has 18 different Ignition Coils and Boots in our inventory ranging from $18.79 to $206.99. That means you can find the exact parts or products you need to keep that 1995 Chevrolet K3500 running smoothly.
Ignition Coils and Boots are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 1995 Chevrolet K3500. Carquest Premium, Carquest, and Driveworks are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Ignition Coils and Boots for your 1995 Chevrolet K3500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 79 reviews in this category, some of the top rated parts include Spark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core with 3.8 stars and Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation with 4.0 stars.
So if you’re in the market for aftermarket Ignition Coils and Boots to keep your 1995 Chevrolet K3500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Ignition Coils and Boots Brands To Make Your 1995 Chevrolet K3500 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1995 Chevrolet K3500 demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Coils and Boots make up Advance Auto Parts’ inventory, and all are ready to help make your K3500 the best it can be. Be sure to browse some of our top Ignition Coils and Boots brands and parts.
Popular Carquest Premium Ignition Coils and Boots
We carry Carquest Premium parts in our stock across Ignition Coil Boots categories, plus more. For a 1995 Chevrolet K3500, our most popular Carquest Premium Ignition Coils and Boots include:
FAQs for 1995 Chevrolet K3500 Ignition Coils and Boots
What are the most purchased Ignition Coils and Boots for the 1995 Chevrolet K3500?
Out of 18 Ignition Coils and Boots for the 1995 Chevrolet K3500, the most popular in our inventory are:
from
$25.99
This product is not rated
Ignition Coil: Meets or Exceeds OE Specifications, 1 Count
Ignition Coils
from
$21.99
This product is not rated
Ignition Coil: Meets OE Specifications, 1 Count
Ignition Coils
What are the top-rated 1995 Chevrolet K3500 Ignition Coils and Boots?
Top-rated Ignition Coils and Boots for your 1995 Chevrolet K3500 based on customer reviews/ratings are:
from
$71.99
(12)
Spark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core
“Always great products and service at this store.”
from
$65.99
(7)
Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation
“Worked great”
from
$206.99
(1)
GM 5.0/5.7L Tbi Truck 95-87
“By the time I got around to install and realize defective warranty was up. Very disappointed. I spent alot of money for rubber”
