from

$12.49

This fuel tank attaching hardware is designed to match the fit and function of the original hardware on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel tank attaching hardware is designed to match the fit and function of the original hardware on specified vehicles
Recommended replacement for the original hardware when servicing or replacing the fuel tank
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$37.99

Make better electrical repairs and accessory installations with this pigtail connector. Designed for a clean appearance when installed, it features weatherproof terminals and a locking tab for a reliable quick disconnect electrical connection.

Product Features:

Professional appearance – this electrical pigtail is designed for a clean, professional look when installed
Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
Durable construction – this pigtail connector features weatherproof seals and a locking tab for a reliable connection
Versatile component – this connector can be used in a variety of repairs and custom installations

from

$77.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$8.49

The A.I.R. Check Valve is an emission control device that allows air into the exhaust system to help burn pollutants. Our A.I.R Check Valve is made to withstand the heat of the exhaust manifold.

Product Features:

Emissions, A.I.R Check Valves – 1994-64 AMC, GM, Chrysler, Fiat, Isuzu, Jaguar, Jeep, MG, Nissan,VW
Air Check Valve
The A.I.R. Check Valve is an emission control device that allows air into the exhaust system to help burn pollutants. Our A.I.R Check Valve is made to withstand the heat of the exhaust manifold.
Include gaskets and mounting hardware for a complete repair
Direct replacement for a proper fit every time

from

$16.16

Recommended for replacement whenever the sending unit is serviced, Dorman’s Fuel Tank Sending Unit Lock Ring securely retains the fuel pump assembly to the lock. Its heavy-duty steel or plastic construction ensures a long life.

Product Features:

Comes with rubber seal or gasket
Direct replacement for a proper fit every time
Corrosion-resistant
Quality-tested for trouble-free performance

from

$2.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$3.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$20.49

Delphi temperature sensors are built with the latest OE technology; Delphi temperature sensors use durable, one-piece design; Delphi temperature sensors are impervious to electrical noise and interference.

Product Features:

Delphi temperature sensors are built with the latest OE technology
Delphi temperature sensors are impervious to electrical noise and interference
Part is validated, tested and matched to the right vehicle application
Delphi temperature sensors feature a one-piece lead-frame design from sensing element tip to connector terminals to help eliminate internal connectors and failure points

from

$104.99

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$188.99

This frame crossmember is designed to match the fit of an original equipment crossmember on specified vehicles, and can help eliminate the need to fabricate a replacement or install a salvage yard part. It is engineered to replace a factory crossmember that has rusted or damaged from impact, and is manufactured from durable steel for a reliable repair.

Product Features:

Ideal replacement – this fuel tank crossmember is a direct replacement for the original crossmember that allows only the damaged part to be replaced
Durable construction – this crossmember is made of steel and painted in a corrosion-resistant finish for a long service life
Cost-effective and reliable – offers original manufacturer quality at lower cost than replacing the frame and saves time and money required to fabricate a replacement
Quality tested – this crossmember has undergone vehicle try-on, material, and corrosion testing to ensure proper fit and long-lasting durability

from

$75.99

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.
The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.

from

$9.99

CARQUEST Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our CARQUEST Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. CARQUEST Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$299.99

This fuel pump driver module is a direct replacement for the original equipment module. Designed to match the original fit and function, it features a plug & play connection for an easy installation.

Product Features:

Advanced replacement – this fuel pump driver module matches the latest original manufacturer technology for certain vehicles
Durable components – features materials with higher temperature ratings to increase reliability
Improved design – circuit board and heat sink both redesigned to solve issues in older OE designs
Made in USA – newly manufactured at an advanced facility in the United States

from

$121.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation

from

$105.99

GM Genuine Parts Oxygen (O2) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are special feedback sensors on your vehicle’s exhaust system and measure the proportion of oxygen in exhaust gases. Using this measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Detects oxygen content in the exhaust gases to help optimize emissions
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$75.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel sending units meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
Precision tested fuel level sensors ensures vehicles fuel gage will provide an accurate reading at any fuel level
Includes strainers for smoother installation process and ensures a clean fuel system upon replacement
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Manufactured with high quality material, ensuring the durability of this part to prevent costly repairs

from

$20.49

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

High-quality products that meet OE appearance and performance to

from

$78.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$82.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Application-specific to ensure the proper fit and form
Precision-engineered pressure regulators for proper fuel delivery and engine performance
As a global manufacturer, we have complete control of the manufacturing process, from components to finished product?

from

$55.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$158.99

GM Genuine Parts Water in Fuel Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors send an electrical signal to the Engine Control Module (ECM) and/or dashboard lamp when water is detected in your vehicle’s fuel supply. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Sends an electrical signal when water is detected in vehicle’s fuel supply
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$38.99

Cardone is proud to offer our line of application specific Diesel Injection Pumps that expand across a variety of platforms. Our diesel injector pumps are precision wound with trimmed solenoid windings ensure accurate and precise delivery of fuel from the ECU. This allows for smooth engine operation, improved fuel consumption, reduced harmful emissions, instant throttle response, and optimal fuel atomization.

Product Features:

All components are renewed or replaced as necessary to ensure high quality and durability
All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E. function

from

$70.99

Product Features:

Original equipment fit, form and function

from

$84.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Robust designs backed by focused research meet today’s technical needs
Decades of industry leading research and development focused on meeting the technician’s needs
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$329.99

New Platinum Pro Fuel Tank 34 Gallon, 97-00 Pu Ch/Gm

Product Features:

97-00 Chevy/GM Pickup
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$44.99

New Platinum Pro Fuel Filler Neck, 13 Inches Long, 1997 Models With 4.3 Liter V6 Engines Only. All 98-00 Models With Fleetside Bed And Gasoline Engines, Excludes Dually

Product Features:

13 Inches Long, 1997 Models With 4.3 Liter V6 Engines Only, All 98-00 Models With Fleetside Bed And Gasoline Engines, Excludes Dually
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$12.49

To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$87.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.