1995 Chevrolet K2500 Drivetrains
More 1995 Chevrolet K2500 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1995 Chevrolet K2500, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1995 Chevrolet K2500 Drivetrains
Yukon Gear – Spider Gear Set For GM 9.5" Gura Drip Posi (Part No.16166)
from
$561.99
Yukon spider gear set for GM 9.5″ Gura Drip posi. This kit does not include clutches. This kit fits Yukon Dura Grip ONLY.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits GM 9.5″ with Dura Grip positraction
- Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Pro-King – Differential Internal Nest Kit (Part No.743B717)
from
$221.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
USA Standard Gear – Spartan Spring & Pin Kit, Fits Smaller Designs (Part No.17011)
from
$26.99
Spartan spring & pin kit, fits smaller designs.
Product Features:
See More
Product Features:
- Replacement spring and pin kit for Spartan Locker
- Fits Dana 30, Dana 44, AMC Model 20, AMC Model 35, and Toyota designs
- Includes 4 springs and 4 alignment pins
National – Bearings (Part No.B-2010)
from
$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Differential Cover B (Part No.33569)
from
$5.99
Differential Cover B
National – Bearings (Part No.N-1211-L)
from
$94.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Pro-King – Differential Cover Gasket (Part No.743B303)
from
$3.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
Dorman – Front Drive Shaft: Greaseable, Adjustable (Part No.938-278)
from
$499.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Dorman – 4WD Switch, Transfer Case Mounted, Electric (Part No.600-506)
from
$24.99
This transfer case switch directly replaces the original equipment switch on certain vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this 4WD switch matches the fit and function of the original switch on specific vehicle applications
- Effective fix – restores proper 4WD operation after original switch degrades and fails
- Durable construction – built for reliable longevity, free of defects in materials and craftmanship
- Trustworthy quality – backed by team of designers and engineers in the United States
Dorman – Differential Ring And Pinion Set (Part No.697-812)
from
$216.99
This differential ring and pinion directly replaces the original equipment on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this ring and pinion set matches the fit and function of the original components on certain vehicle applications
- Effective fix – eliminates grinding and whining from failed original bearings
- Thoroughly tested – vehicle try-on testing and rigorous quality control measures ensure longevity
- Trustworthy quality – backed by team of designers and engineers in the United States
Spicer – Universal Joint (Part No.5-160X)
from
$40.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Dorman – 4WD Actuator, Front Axle (Part No.600-101)
from
$104.99
This 4WD actuator directly replaces the original equipment part on specific vehicle applications. It is reverse engineered to reliably restore proper functionality.
Product Features:
See More
Product Features:
- Direct replacement – this 4WD axle actuator directly replaces the original equipment part on specific vehicle years, makes and models
- Effective fix – installation addresses inoperative four-wheel drive caused by failed original actuator
- Smart solution – delivers reliable fit and function for competitive price
- Trustworthy quality – backed by team of designers and engineers in the United States
EVO Driveline – Remanufactured Transfer Case (Part No.UMT109)
from
$1334.99
Evolution Driveline products, are remanufactured to meet or exceed OEM specifications for quality, fit, and performance. Every transfer case we sell passes a comprehensive battery of tests on our computerized test center. We recreate actual driving conditions and analyze performance before the product even leaves the factory, so you can buy with confidence.
Product Features:
See More
Product Features:
- Back Lash, Mesh Load, Leak and Rotational Torque QC testing performed on each unit.
- OEM cores are processed as individual units throughout the tear down and assembly process
- Cores cleaned using our Hydro Blast cleaning and rinse process
- All case halves wet sanded to ensure perfect mating surfaces
- Loctite gasket eliminator and primer used to seal all aluminum mating surfaces
- Remanufactured in our ISO9001:2008 USA facility.
- Without Motor
Yukon Gear – Dura Grip Positraction For GM 9.5" With 33 Spline Axles (Part No.26025)
from
$1025.00
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.
Product Features:
See More
Product Features:
- Fits GM 9.5″
- 4-spring, clutch style positraction
- Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
- Fully rebuildable
- Assembled in the USA
Yukon Gear – Pinion Seal For GM 14T (Part No.30023)
from
$19.99
Pinion seal for GM 14T.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion seal
- Fits 1998 and down GM 10.5″ 14 bolt truck
EMPI – RE CV Joint Boot Kit (Part No.K6010468776EMP)
from
$27.89
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination
Product Features:
See More
Product Features:
- Help restore the vehicle to like-new condition
- Constructed of high strength OE materials
- Resists environmental contamination
- Protects the CV joint from premature failure
Yukon Gear – GM 9.5" Ring Gear Bolt (Part No.33047)
from
$12.99
GM 9.5″ ring gear bolt. 12mm x 1.5.
Product Features:
See More
Product Features:
- Ring gear bolt for GM 9.2″
- 12mm x 1.5
Dorman – 4 Wheel Drive Actuator Pigtail (Part No.645-902)
from
$113.99
This 4WD actuator wiring harness directly replaces the original harness on certain vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this four-wheel drive actuator pigtail matches the fit and function of the original equipment
- Effective fix – properly restores 4WD functionality after original harness fails
- Durable construction – built for reliable longevity, free of defects in materials and workmanship
- Trustworthy quality – backed by team of designers and engineers in the United States
Dorman – Distorted Thread Spindle Nut M24-2.0 Hex Size 36mm (sold by each) (Part No.615-095)
from
$10.79
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Driveshaft Slip Yoke (Part No.697-560)
from
$185.99
Drive shaft slip yoke vibrating, clunking or failed completely? This slip yoke directly replaces the original equipment on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft slip yoke directly replaces the original equipment yoke on specified vehicles
- Effective fix – replacement restores safe, smooth driveline operation
- Rigorously tested – designed and evaluated to assure safe, reliable operation
- Trustworthy quality – backed by team of engineers and inspectors in the United States
Yukon Gear – Standard Open And Gov-Loc Cross Pin Bolt With M10X1.5 Thread For 9.5" And 9.25" GM IFS (Part No.33342)
Driveworks – Taper Bearing Cone (Part No.S-HM-88649)
from
$19.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – Differential Carrier (Part No.57015)
from
$251.99
Differential Carrier
National – Bearings (Part No.J-2416)
from
$26.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Pinion Depth Shims For Chrysler 8.75", 9.25", GM 9.5" & Ford 10.25" (Part No.55059)
from
$21.99
8.75-42, 8.75-89, 9.25″ Chrysler & GM, 9.5″, 10.25″ pinion shim kit.
Product Features:
See More
Product Features:
- Pinion depth shim kit for Chrysler 8.75″ with ’42’ or ’89’ case housing, Chrysler 9.25″, GM 9.5″ and Ford 10.25″
Motive Gear – Differential Pinion Shim Kit (Part No.1102)
Pro-King – Differential Pinion Shim Kit (Part No.743B200)
from
$13.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Popular 1995 Chevrolet K2500 Drivetrains Categories
1995 Chevrolet K2500 Drivetrains
You count on your 1995 Chevrolet K2500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 458 Drivetrains ranging in price from $2.59 to $1,374.99, you’re sure to find everything you need for your 1995 Chevrolet K2500.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 30 different brands like Moog, Valvoline, and Driveworks. 1995 Chevrolet K2500 Drivetrains start as low as $2.59!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 10,613 extensive product reviews on 1995 Chevrolet K2500 Drivetrains. Some of the top-rated Drivetrains products we carry are Universal Joint with 4.4 stars and 4WD Actuator, Front Axle with 4.5 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1995 Chevrolet K2500 below to get started!
Top-Rated Drivetrains Brands For Your 1995 Chevrolet K2500
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1995 Chevrolet K2500 running right for years to come. In our inventory you’ll find brands like Moog, Valvoline, Driveworks, and even more.
Popular Pennzoil Drivetrains
You’ll find popular Pennzoil brand products across Differentials. All are waiting to get your 1995 Chevrolet K2500 back on the road. Some of the top-rated Pennzoil products in these categories are:
Top-Rated MOOG Driveline Products Drivetrains
If MOOG Driveline Products are what you’re looking for, our inventory holds plenty. We stock MOOG Driveline Products brand Drivetrains for your 1995 Chevrolet K2500, and some of our most reviewed MOOG Driveline Products parts include:
FAQs for 1995 Chevrolet K2500 Drivetrains
What are the most purchased Drivetrains for the 1995 Chevrolet K2500?
Out of 458 Drivetrains for the 1995 Chevrolet K2500, the most popular in our inventory are:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
What are the top-rated 1995 Chevrolet K2500 Drivetrains?
Top-rated Drivetrains for your 1995 Chevrolet K2500 based on customer reviews/ratings are:
from
$36.99
(41)
Greaseable Super Strength Universal Joint
“Easy install and great way to have sting durability with access to grease points”
