1995 Chevrolet Impala Distributors

Essential 1995 Chevrolet Impala Distributors

MSD Ignition – Vacuum Advance Mechanism (PN 8460/PN 8461) (Part No.8463)

Vacuum Advance Mechanism (PN 8460/PN 8461)

from

$36.49
This is the replacement canister for MSD distributors equipped with vacuum advance (except the PN 8365 and PN 8362 HEI distributors.)

Product Features:
  • Replacement Canister
  • Vacuum Advance Mechanism
  • For Replacement On PN[8460/8461]
  • Size Replacement Canister For Distributor PN[8360/8361]
See More

Carquest Premium – Distributor Vacuum Advance (Part No.VBC1069)

Distributor Vacuum Advance

from

$25.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Distributor Vacuum Advance (Part No.VBC1018)

Distributor Vacuum Advance

from

$33.99
The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:
  • All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest Premium – Distributor Vacuum Advance (Part No.VBC1098)

Distributor Vacuum Advance

from

$14.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

GM Genuine Parts – Ignition Distributor Shaft O-Ring Seal (Part No.D3995A)

Ignition Distributor Shaft O-Ring Seal

from

$14.29
GM Genuine Parts Ignition Distributor Shaft Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D100811)

Flame-Thrower Electronic Distributor Billet

from

$391.99
Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our distributors ship with Ignitor II technology modules. Replace your outdated points, electronic distributor or bulky HEIs with this performance

Product Features:
  • PerTronix D100811 Flame-Thrower Electronic Distributor Billet Chevrolet Small Block/Big Block Plug and Play with Ignitor II Technology Non Vacuum Advance Red Male Cap
  • Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
See More

Mallory – Unilite Dist. Oldsmobile 330-455 (Part No.3763401)

Unilite Dist. Oldsmobile 330-455

from

$538.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.

Product Features:
  • Improved Combustion And Economy
  • Increased Spark Plug Life
  • Improved Cold Weather Starting
  • Maintenance Free Operation
  • Accurate Spark Timing
  • Self-Lubricating Bushings
  • Years Of Trouble-Free Service
See More

MSD Ignition – Distributor; Billet; Chevy V6 Even-Fire (Part No.8597)

Distributor; Billet; Chevy V6 Even-Fire

from

$545.99
Starting on the inside, a 0.500 In. oversized steel shaft spins in a sealed ball bearing and sintered bushing for long endurance and accurate spark delivery throughout the entire RPM range. Mounted on top of the shaft is an easy-to-adjust chromoly mechanical advance assembly. Different advance springs and stop bushings are supplied so you can choose from 24 curves. A maintenance-free magnetic pick-up provides accurate trigger signals to your MSD Ignition control. A precision-manufactured reluctor that is connected to the shaft is responsible for triggering the pick-up. The distributor is topped off with a high quality black cap and race rotor.

Product Features:
  • CNC machined billet aluminum housing and billet aluminum base
  • Will not accept a vacuum advance canister
  • Must Be Used w/An MSD Ignition Control
  • O-ring seals can be installed for oil press. control (Mods only)
  • Supplied w/Socket Style Distributor Cap And Rotor
  • Special oil tract improves lubrication to the dist./cam gear
  • Nylon pads ensure smooth operation of the advance weights
  • Advance weight pins are staked and tig welded to the plate
See More

MSD Ignition – Distributor; Tall Block Chevy V8; Low Profile (Part No.8558)

Distributor; Tall Block Chevy V8; Low Profile

from

$471.99
The unique design of these distributors fit tight intake systems while still transferring the high voltage of the MSD racing ignition to the spark plugs. The high voltage carrying capabilities are the result of several features which have been designed into these low-profile distributors. This includes a large diameter cap with wide spaced terminals and an injection molded Rynite rotor with thick vanes to stir up the air inside the cap. The high dielectric Rynite base also prevents arcing to the billet housing. Since these distributors are used primarily in racing applications, an oversized steel shaft is responsible for delivering the sparks. This shaft is QPQ coated for friction reduction and receives guidance from a sealed ball-bearing assembly and an extra long, precision sintered bushing for smooth operation. Note: must be used with an MSD crank trigger and ignition control.

Product Features:
  • Designed to fit low in the block to clear firewall/intake combos
  • Supplied w/Bronze Gear
  • Supplied w/Large Diameter HEI Style Distributor Cap And Rotor
  • Must Be Used w/An MSD Crank Trigger And MSD Ignition Control
  • O-ring seals can be installed for oil press. control (Mods only)
  • Special oil tract improves lubrication to the dist./cam gear
  • QPQ coated polished steel shaft; guided by sealed ball bearings
  • Oversized Polished Steel Shaft w/QPQ Coating
See More

Carquest Premium – Distributor Ignition Pickup Connector (Part No.PTA1205)

Distributor Ignition Pickup Connector

from

$35.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

MSD Ignition – Distributor Gear; MSD Chevy Distributor; .500 ID; Iron (Part No.8531)

Distributor Gear; MSD Chevy Distributor; .500 ID; Iron

from

$54.39
This gear test fixture features variable rpm and oil pressure control allowing MSD engineers the ability to maintain the exact conditions that they want for gear tests. Severe loads can be placed on the gear and the fixture can spin up to 10,000 rpm. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:
  • Increased outer hardened layer thickness (RC 55-60)
  • Micro Polished Surface For Smooth Contact
  • Proprietary formulated ductile iron.
  • Melonite QPQ coated reduces friction and initial wear
  • Interstitial carbide improves wear resistance/running properties
See More

National – Multi Purpose Seal (Part No.100058)

Multi Purpose Seal

from

$10.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design type: springless; single-lip
  • Temperature range: -100°F to 450°F; -73°C to 232°C
  • Resistant to hydrocarbon/oxygenate blends and provides superior performance
  • Provides excellent dry running capabilities, low coefficient of friction and excellent resistance to chemicals
  • Delivers quality and reliable performance for every type of repair
See More

Delphi – Distributor Ignition Pickup (Part No.CE10005)

Distributor Ignition Pickup

from

$19.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.

Product Features:
  • OE quality replacement parts for the right fit, form and function
  • Delphi OE technology ignition products are validated to match the vehicles system
  • Delphi’s coil products are designed and endurance tested to resist the common stresses that cause failure
  • OE quality replacement parts for the right fit, form and function
See More

Carquest Premium – Distributor Ignition Pickup Connector (Part No.PTA1044)

Distributor Ignition Pickup Connector

from

$17.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest – Distributor Cap and Rotor Kit (Part No.C400)

Distributor Cap and Rotor Kit

from

$151.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Solid brass terminals make better connections and greater resistance to electrical pitting and corrosion
  • As a global manufacturer, we have complete control of the manufacturing process, from components to finished product?
  • As a premier manufacturer serving the automotive aftermarket since 1919, we deliver the highest quality and best coverage to meet your repair needs
See More

Carquest Premium – Distributor Cap (Part No.CAC1065)

Distributor Cap

from

$9.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

PerTronix – D600710 Cap Male Black and Rotor 8 cylinder Flame-Thrower Billet Distributor (Part No.D600710)

D600710 Cap Male Black and Rotor 8 cylinder Flame-Thrower Billet Distributor

from

$51.99
Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors. High dielectric strength cap with male or female brass terminals with premium rotor with brass contact.

Product Features:
  • PerTronix D600710 Cap Male Black and Rotor 8 cylinder Flame-Thrower Billet Distributor
  • Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors
See More

PerTronix – D4001 Flame-Thrower HEI Distributor Cap and Rotor Kit Red (Part No.D4001)

D4001 Flame-Thrower HEI Distributor Cap and Rotor Kit Red

from

$42.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:
  • Made from hi-performance 60 KV rated alkyd molding compound.
  • Cap and rotor kits include nylon rotor hold-down screws.
  • Flame-Thrower dust covers provide a larger air gap around the coil.
See More

Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAE1792)

Distributor Cap and Rotor Kit

from

$13.99
Distributor Cap and Rotor Kit

ACDelco – GM Original Equipment Ignition Distributor Cap (Part No.F2010175613ACD)

GM Original Equipment Ignition Distributor Cap

from

$27.50
The ACDelco GM Original Equipment Distributor Cap is a GM-recommended replacement for your vehicle’s original component. This original equipment distributor cap has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors. Get the GM quality you know and trust with ACDelco GM Original Equipment Ignition System and Switch products. Stay with the brand of parts your General Motors vehicle came with and get peace of mind that the fit, form, and function is up to the high standards and specifications of General Motors. ACDelco GM Original Equipment Ignition System and Switch products are engineered for all models of GM vehicles on the road today.

Product Features:
  • Have metal inserts designed to provide the best possible fit to ensure maximum conductivity between the distributor towers and spark plug wires
  • Easy-to-read locator keys on caps make proper installation simple
  • Equipped with a full anti-arc barrier to reduce the possibility of secondary voltage arcs that can cause an engine to misfire
  • Undergo stringent testing, often under extreme or unusual conditions, to deliver the quality parts you expect from ACDelco
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

MSD Ignition – Cap and Rotor Kit; HEI; Extreme; includes PN 84111; 84101; 84022 (Part No.84023)

Cap and Rotor Kit; HEI; Extreme; includes PN 84111; 84101; 84022

from

$116.99
The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.

Product Features:
  • Includes PN[84111/84101/84022]
See More

Carquest – Distributor Cap (Part No.24E1023)

Distributor Cap

from

$9.79
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • High-quality products that meet OE appearance and performance to
See More

MSD Ignition – Distributor Cap; Crab Cap; HEI Terminal; fits PN8486/PN 8489 (Part No.8541)

Distributor Cap; Crab Cap; HEI Terminal; fits PN8486/PN 8489

from

$96.99
MSD molds our most popular V8 distributor caps in-house. These caps are injection molded from DuPont(R) rynite material and feature spark plug-style terminals. These terminals offer improved locking connections and the rynite material is extremely strong.

Product Features:
  • Rynite molded cap
  • HEI style spark terminals
  • Designed w/Performance In Mind
  • High quality; voltage insulating material
  • Used For MSD PN[8567/84673]
  • Fits In Extremely Tight Areas
  • Red
See More

Delphi – Distributor Cap (Part No.DC1015)

Distributor Cap

from

$16.29
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.

Product Features:
  • OE Quality Replacement Parts For The Right Fit , Form And Function
  • Delphi OE technology ignition products are validated to match the vehicles system
  • Delphi’s coil products are designed and endurance tested to resist the common stresses that cause failure
  • Delphi parts are built to meet or exceed OE requirements
See More

MSD Ignition – Distributor Cap; Alkyd; MSD Chevy V8 Distributor (Part No.8437)

Distributor Cap; Alkyd; MSD Chevy V8 Distributor

from

$48.49
All MSD extra duty distributor caps are designed with performance in mind and are molded from high quality, voltage insulating material and use low resistance terminals.

Product Features:
  • Update The GM Points Cap w/MSD Performance
  • High Quality; Voltage Insulating Material
  • Low Resistance
  • Performance replacement part
See More

ACDelco – Ignition Distributor Cap (Part No.D336X)

Ignition Distributor Cap

from

$26.49
ACDelco Professional Distributor Cap is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket cap is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest – Distributor Cap (Part No.24C1009)

Distributor Cap

from

$10.79
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • High-quality products that meet OE appearance and performance to
See More

Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAE1787)

Distributor Cap and Rotor Kit

from

$15.99
Distributor Cap and Rotor Kit

1995 Chevrolet Impala Distributors

Maybe you’re in the middle of a full rebuild of that 1995 Chevrolet Impala. Maybe you just need a couple of Distributors. Either way, Advance Auto Parts has 37 different Distributors in our inventory ranging from $10.29 to $433.99. That means you can find the exact parts or products you need to keep that 1995 Chevrolet Impala running smoothly.

Distributors are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 1995 Chevrolet Impala. PerTronix, Carquest Premium, and Carquest are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Distributors for your 1995 Chevrolet Impala, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 11 reviews in this category, some of the top rated parts include Dist GM Opti-Spark Ii 94.5-97 with 3.0 stars and D4000 Flame-Thrower HEI Distributor Cap and Rotor Kit Black with 1.0 stars.

So if you’re in the market for aftermarket Distributors to keep your 1995 Chevrolet Impala rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Distributors Brands To Make Your 1995 Chevrolet Impala Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1995 Chevrolet Impala demands trusted brand parts and products to keep it running. Many trusted brands of Distributors make up Advance Auto Parts’ inventory, and all are ready to help make your Impala the best it can be. Be sure to browse some of our top Distributors brands and parts.

Popular Carquest Distributors

We carry Carquest parts in our stock across Distributor Cap Kits categories, plus more. For a 1995 Chevrolet Impala, our most popular Carquest Distributors include:
Distributor Cap and Rotor Kit
from $151.05
(4)
Distributor Cap and Rotor Kit
Distributor Cap Kits

FAQs for 1995 Chevrolet Impala Distributors

What are the most purchased Distributors for the 1995 Chevrolet Impala?

Out of 37 Distributors for the 1995 Chevrolet Impala, the most popular in our inventory are:
Distributor T1803: 100% New, With Cap and Rotor
from $195.99
(3)
Distributor T1803: 100% New, With Cap and Rotor
Distributors
D4002 Flame-Thrower HEI Distributor Cap and Rotor Kit Blue
from $42.99
(1)
D4002 Flame-Thrower HEI Distributor Cap and Rotor Kit Blue
Distributor Cap Kits
Distributor Ignition Pickup Connector
from $17.79
This product is not rated
Distributor Ignition Pickup Connector
Distributor Ignition Pickup Connectors

What are the top-rated 1995 Chevrolet Impala Distributors?

Top-rated Distributors for your 1995 Chevrolet Impala based on customer reviews/ratings are:
Dist GM Opti-Spark Ii 94.5-97
from $433.99
(2)
Dist GM Opti-Spark Ii 94.5-97
“After trying two store brand optisparks and them only lasting approximately 1000 miles each, I went with the Accel. 6 months in now and no problems (”
D4000 Flame-Thrower HEI Distributor Cap and Rotor Kit Black
from $41.99
(1)
D4000 Flame-Thrower HEI Distributor Cap and Rotor Kit Black
“The slots made in the distributor cap for the wiring terminal blades do not have the correct clearance for the blades to be installed properly. The s”