1995 Chevrolet C3500HD Performance and Racing Products

Essential Performance and Racing Products for 1995 Chevrolet C3500HDs

Mr. Gasket – Intake Bolt Kit (Part No.5003)

Intake Bolt Kit

from

$75.99
Finish your custom engine job with these show quality grade 5 chromed 12-point bolts, includes AN washers which have no exposed shoulder for a professional appearance. Includes (12) 3/8-16 x 1 inch bolts with (12) 3/8 inch AN washers.

Product Features:
  • Chrome plated
  • Grade 8
  • 12-point head
  • AN washers with no exposed shoulder for a professional appearance
See More

Mr. Gasket – Ultra Seal: Sure-Lock Rocker Arm Nuts (Part No.920G)

Ultra Seal: Sure-Lock Rocker Arm Nuts

from

$64.19
These are high quality nuts with allen set screws to provide you with that positive lock needed for Race or original equipment Rocker Arms.

Product Features:
  • They Are Zinc Dichromate Plated Steel
  • They Have Black Oxide Coated Set Screws
  • Keeps Rocker Arms Positively Locked
  • (16) Rocker Arm Nuts w/ Locks 3/8″-24 Threads
  • Includes Locks and Hex Wrench
  • Shank O.D. .603″
See More

Spectre – Engine Dress Steel Up Kit (Part No.5428)

Engine Dress Steel Up Kit

from

$99.99
This Spectre engine dress-up kit was designed for the 1987 – 1995 Chevy 305 & 350 engines. This kit includes: stock height valve covers, chrome valve cover T-bolts, chrome oil filler cap, chrome PCV breather, grommets, and an air cleaner adapter stud. The air filter adapter stud, is a z-bolt that is designed to allow you to use a center stud style air cleaner assembly instead of the stock dual-stud setup. Manufactured using high quality materials this kit features triple chrome plated parts.

Product Features:
  • For 1987-1995 Chevrolet 305-350 engines
  • Includes stock height valve covers & T-bolts
  • Includes oil filler caps, pcv vent filter
  • Includes air cleaner Z-Stud
  • Chrome engine kit
See More

Competition Cams – Thumpr 243/257 Hydraulic Flat Cam and Lifter Kit for Chevrolet Big Block 396-454 (Part No.CL11-602-4)

Thumpr 243/257 Hydraulic Flat Cam and Lifter Kit for Chevrolet Big Block 396-454

from

$1322.99
BIG BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.

Product Features:
  • Cam and lifter kit for Big Block Chevy engines
  • CL-Kit includes cam, lifters, assembly lube, instructions and decals
  • HYDRAULIC – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.
  • 295/312 Advertised Duration, 243/257 Duration @ .050″, .522″/.507″ Lift, 107 Lobe Separation
  • Valve spring upgrade required
See More

Mr. Gasket – Advance And Retard Cam Bushings (Part No.85)

Advance And Retard Cam Bushings

from

$42.49
With Mr. Gasket cam degree bushings you fine tune the camshaft timing of your engine to as little as 1 degree. Even aftermarket timing sets with multiple keyways can’t give the range of adjustment these bushings allow. Retard your camshaft to lower the powerband for more low end torque and midrange horsepower, or advance for more top end power. This kit does even number adjustment 0-8 degrees.

Product Features:
  • Advance the cam for increased torque and horsepower
  • Tune your powerband for more end torque or increase top end horsepower
  • Includes (4) offset bushings and (1) 0 degree bushing
  • Cam sprocket dowel pin hole must be drilled to .406¿ (13/32¿) dia.
  • Cam sprocket dowel pin hole must be drilled to .406┐ (13/32┐) dia.
  • Increase Top-End Horsepower
See More

Mr. Gasket – Valve Cover (Part No.9847)

Valve Cover

from

$92.99
Chrome plated steel valve cover caps. Fits over original valve covers on 1987-1997 GM (General Motors) small block truck applications only. These caps fit OVER the top of the original equipment valve covers & the original equipment covers use the stock fill cap, breathers, PCV, grommets, and hardware.

Product Features:
  • Chrome plated steel construction
  • These Caps Fit Over Existing Factory Stock Painted Valve Covers
  • Fits Over Truck Center-Bolt Valve Covers
  • Sold as a pair
  • Fits Truck applications only
  • Stock OEM Truck Valve Covers Must Remain in Place & Reuse the Existing Hardware, Breathers, Fill Cap, PVC & Grommets
See More

Mr. Gasket – Intake Manifold Bolts (Part No.955G)

Intake Manifold Bolts

from

$15.49
These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.

Product Features:
  • Grade 5 socket head bolts are zinc plated for protection and appearance
  • Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds
  • Washers Included
See More

Mr. Gasket – Header Bolt Set (Part No.2210G)

Header Bolt Set

from

$41.99
Made of high quality stainless steel. These bolts will brighten up your hot rod, or improve the looks of your race car.

Product Features:
  • Bright Ball Burnish Finish
  • Made From 304 Stainless
  • Compact Hex Head Is Ideal Where Space Is Limited
  • 12 Per Set
  • Resist corrosion and provides a clean professional appearance
See More

Mr. Gasket – Performance Exhaust Gasket Set for Enhanced Sealing and Durability (Part No.150B)

Performance Exhaust Gasket Set for Enhanced Sealing and Durability

from

$20.99
Mr. Gasket Performance exhaust gasket material is a heavy duty material, .062 inch thick, consisting of an acrylic binder system to resist high temperature. This material is made for sealing exhaust applications. Provides excellent sealing and durability.

Product Features:
  • Manufactured from high-temperature acrylic blend exhaust material
  • Provides excellent sealing and durability
  • Can be trimmed if necessary for modified port applications
  • For OE replacement, high performance street, drag race and oval track use
  • Resists Deteriorating
  • Provides Excellent Torque Retention
See More

Mr. Gasket – Intake Gasket (Part No.101B)

Intake Gasket

from

$28.99
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. They provide excellent sealing and durability. Can be trimmed if necessary for modified port applications. Complete with manifold end seals and distributor gasket (where applicable). For original equipment replacement, high performance street, drag race and oval track.

Product Features:
  • Manufactured from cellulose/nitrile composition gasket material
  • Provides excellent sealing and durability
  • Can be trimmed if necessary for modified port applications
  • Complete with manifold end seals and distributor gasket where applicable
  • For OE replacement, high performance street, drag race and oval track use
See More

Accel – GM 1984-95 Remote Supercoil (Part No.140011)

GM 1984-95 Remote Supercoil

from

$79.99
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Compatible with late model GM computer controlled remote mount HEI systems. Direct bolt-in, plug-in replacement. Brass coil wire contact increases energy transfer and resists corrosion better than aluminum. Complete with new mounting hardware.

Product Features:
  • 10-15% More Energy
  • Direct Plug In Replacement Direct OE Fit
  • Advanced Bobbin Technology
  • Highly Specialized Silicone Magnetic Steel Cores
  • Standard Motor Products SMP DR-37
  • MSD 8226
  • Resist Corrosion
  • W/New Mounting Hardware
See More

Spectre – Aluminum Timing Pointer (Part No.4936)

Aluminum Timing Pointer

from

$64.99
Spectre’s timing tabs have an adjustable timing pointer to allow for a more accurate reading and they can work with any size harmonic balancer. Designed for Chevy small block engines, Spectre’s adjustable timing tabs have a polished aluminum finish so it will look great under your hood.

Product Features:
  • Polished aluminum finish
  • Designed for Chevy small block engines
  • Adjustable pointer allows for use with 6, 7, and 8 In. harmonic balancers
  • Installs easily where original tab mounts
See More

Spectre – Chevrolet Small Block V8 Harmonic Balancer Bolt Kit (Part No.4699)

Chevrolet Small Block V8 Harmonic Balancer Bolt Kit

from

$7.99
Spectre’s Harmonic Balancer Bolt Kit is designed to fit Chevrolet Small Block 265-400 V8 engines. This grade 8 bolt is 2-1/2 inches long, and features a plated finish for corrosion resistance. This kit also includes a security lock washer.

Product Features:
  • Fits Chevrolet Small Block 265-400 V8 engines
  • Features a corrosion resistant plated finish
  • Gold iridite finish
  • Grade 8 bolt, 7/16 inch-20 by 2-1/2 inches
  • Includes security lock washer
See More

Mr. Gasket – Timing Cover Seal (Part No.18)

Timing Cover Seal

from

$15.99
If you are changing your camshaft or replacing the timing set, make sure to replace this seal at the same time! Metal with Nitrile rubber seal.

Product Features:
  • Nitrile Rubber And High Density Cork
  • Will Not Shrink Or Stick
See More

Competition Cams – CAMSHAFT, BBC 280 MAGNUM HYD 1 EA (Part No.11-208-3)

CAMSHAFT, BBC 280 MAGNUM HYD 1 EA

from

$247.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts. Ideal for use with higher compression ratio engines that

Product Features:
  • Best with aftermarket torque converters and 9.5:1 compression.
  • Great high RPM power.
  • Easy on valve train parts.
  • Can be used with mild ratio rocker arms and traditional performance valve springs.
See More

Mr. Gasket – Ultra Seal: Oil Pan Stud Kit (Part No.6315)

Ultra Seal: Oil Pan Stud Kit

from

$45.99
The black finish grade 5 bolts have a bullet tip to make installation easy. The zinc plated self-locking nuts give uniform clamping for a positive seal.

Product Features:
  • Includes:
  • (14) 1/4″-20/28 x 1-1/8″ Long
  • (4) 5/16″-18/24 x 1-5/16″ Long
  • Zinc Plated Self-Locking Nuts
  • Assures Positive Gasket Seal
  • The Professionals Choice
See More

Mr. Gasket – Chrome Valve Cover Wing Bolts (Part No.9824)

Chrome Valve Cover Wing Bolts

from

$15.99
Chrome-plated for beauty and durability, wing bolts make valve cover removal fast & easy. They are precision-engineered and feature extra-long threads to accommodate Mr. Gasket re-usable valve cover gasket & custom valve covers.

Product Features:
  • Fits Chevy V8
  • Standard Y Top 1/4 In-20 X 5/8 in L
  • Chrome Plated Steel
  • Overall Length: 4.64″
  • Installed Length: 4.00″
  • Pack of 4
See More

Mr. Gasket – Premium Quality Thermostat Gasket with Solid Aluminum Carrier (Part No.738G)

Premium Quality Thermostat Gasket with Solid Aluminum Carrier

from

$31.99
Edge molded rubber water outlet gasket is reusable, great for engines that require regular disassembling for maintenance. Incorporates solid aluminum carrier for strength and rigidity. Can be used with OE replacement or aftermarket chrome water outlets. Requires no gasket sealer.

Product Features:
  • Edge Molded Rubber Water Outlet Gasket Is Reusable
  • Requires No Gasket Sealer
  • Solid Aluminum Carrier For Strength/rigidity
  • Reusable – Ideal for Engines That Are Frequently Taken Apart & Reassembled
See More

Mr. Gasket – Rear Main Seal Gasket (Part No.29)

Rear Main Seal Gasket

from

$42.49
This Mr. Gasket Rear Main Seal is made from Viton&reg: Rubber. This style of rubber can handle high temperature like silicone rubber, but with superior abrasion resistance. Its durability and it’s double, offset lip seal design make it recommended for applications that have high engine vacuum, like racing engines that utilize external vacuum pumps for crankcase evacuation.

Product Features:
  • Repairs That Leaky Rear Main Sail
  • Viton« Rubber Offers Both Abrasion Resistance & High Temperature Tolerance
  • Viton® Rubber Offers Both Abrasion Resistance & High Temperature Tolerance
  • Upgrade for Rope Seal Equipped Cars or Silicone Rubber Main Seals
See More

B & M – Automatic Shifter, Hammer Shifter, Universal (Part No.80885)

Automatic Shifter, Hammer Shifter, Universal

from

$339.99
The Hammer shifter may just be the most comfortable and versatile shifter available. The unique design of the shift handle easily fits all sizes of hands providing the appropriate wrist angle and feel when shifting. The multi-position lockout trigger is s

Product Features:
  • Ratchet Action Shifter
  • Cable Operated
  • Quick Installation
  • Accurate Shifting
  • Reverse Lockout Feature
See More

B & M – Automatic Shifter, Quicksilver 4 Speed (Part No.80683)

Automatic Shifter, Quicksilver 4 Speed

from

$439.99
The B&M Quicksilver features a ratcheting action for positive shifts, Chrome Knob, neutral safety switch, NHRA/IHRA approved Reverse Lockout. Fits Most 3 and 4 speeds.

Product Features:
  • Universal Floor Mount Application
  • Base Trimmed For Custom Fit
  • Cable Operated
  • Quick Installation
  • Accurate Shifting
See More

Hurst – B-1 Shifter Boot and Plate (Part No.1147336)

B-1 Shifter Boot and Plate

from

$42.49
Designed for use with round stick shifters. Complete with chrome ID plate and mounting hardware. Measures: 4-3/8 in. x 5-3/8 in. with 3 pleats.

Product Features:
  • Complete with Mounting Hardware
  • Adapt To Most Shifter Install
  • Hurst Quality
  • Works Well with Round Shift Levers
  • Chrome ID Plate
See More

Mr. Gasket – Valve Cover Gasket Set (Part No.168)

Valve Cover Gasket Set

from

$42.49
Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.brbrThese gaskets are .187 inch thick. Fits Chevy 5.0, 5.7L Vortec V8 with center bolt valve covers.

Product Features:
  • Manufactured from high-density cork/rubber blend gasket material
  • Provides excellent sealing and durability
  • For OE replacement, high performance street, drag race and oval track
See More

Mr. Gasket – Mls Head Gasket (Part No.3130G)

Mls Head Gasket

from

$111.99
Our unique Multi-Layered steel head gasket embossment formation process optimizes the embossment radius, reduces stress points, enhances gasket conformability, and provides uniform clamp load distribution. This all results in superior surface contact between block and cylinder head. All head gasket layers/spacers go through an additional process to significantly reduce forming induced stress. Advantages are reduced brittleness in material, increased flexibility and deformation retention. This stabilizes the gasket, resulting in reduced cylinder bore distortion and improved combustion seal fro the extreme cylinder pressures found in high compression, supercharged and turbocharged applications. A proprietary polymer coating ensures the micro-seal of engine coolant and oil fluids.brbrA typical MLS head gasket requires a smoother (30Ra) surface finish than composite head gaskets. Mr. Gasket’s proprietary polymer coating will seal a surface finish twice as rough (60Ra) as a typical MLS head gasket. For high performance street, drag race and oval track use.

Product Features:
  • Gasket bore – 4.060″ Thickness – .040″
  • Manufactured from 3-layer premium grade stainless steel and state of the art laser cutting
  • Optimized sealing embossments seals extreme cylinder pressure
  • Provides excellent stability and reduces cylinder bore distortion.
  • Proprietary polymer coating ensures the micro seal of engine coolant and oil fluids.
  • Ideal for supercharged, turbocharged, nitrous oxide and extreme compression ratio engines
  • For high-performance street, drag race and oval track use
See More

Upgrade your 1995 Chevrolet C3500HD with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1995 Chevrolet C3500HD, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Performance and Racing Products are key to keeping your C3500HD functioning at its best. At Advance Auto Parts, we offer a wide selection of 35 Performance and Racing Products for the 1995 Chevrolet C3500HD, designed to meet your needs without breaking the bank. From Performance Valve Cover replacements to Performance Ignition Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1995 Chevrolet C3500HD at great prices. Our Performance and Racing Products inventory for this model ranges from just $8.79 to $1,322.99, with an average price of $145.22. Our 35 Performance and Racing Products in stock come from 6 trusted brands, so you’re sure to find the right part for your 1995 Chevrolet C3500HD without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1995 Chevrolet C3500HD, we stock popular OEM and aftermarket Performance and Racing Products from top names like MSD Ignition Accel, and more. MSD Ignition Performance and Racing Products start at just $65.99 and boast an impressive 4.2 stars average rating from customers. With 98 customer reviews and counting, our 1995 Chevrolet C3500HD Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1995 Chevrolet C3500HD is always ready to roll. We’re committed to providing you with everything you need to keep your C3500HD in top shape, all in one place. Start shopping confidently below for your 1995 Chevrolet C3500HD!

Best-Selling Performance Valve Covers for 1995 Chevrolet C3500HDs

Enhance the driving experience in your Chevrolet with 3 quality Performance Valve Cover components, starting at $15.99.

Mr. Gasket – Chrome Valve Cover Wing Bolts (Part No.9824)

Chrome Valve Cover Wing Bolts

from

$15.99
Chrome-plated for beauty and durability, wing bolts make valve cover removal fast & easy. They are precision-engineered and feature extra-long threads to accommodate Mr. Gasket re-usable valve cover gasket & custom valve covers.

Product Features:
  • Fits Chevy V8
  • Standard Y Top 1/4 In-20 X 5/8 in L
  • Chrome Plated Steel
  • Overall Length: 4.64″
  • Installed Length: 4.00″
  • Pack of 4
See More

Mr. Gasket – Valve Cover (Part No.9847)

Valve Cover

from

$92.99
Chrome plated steel valve cover caps. Fits over original valve covers on 1987-1997 GM (General Motors) small block truck applications only. These caps fit OVER the top of the original equipment valve covers & the original equipment covers use the stock fill cap, breathers, PCV, grommets, and hardware.

Product Features:
  • Chrome plated steel construction
  • These Caps Fit Over Existing Factory Stock Painted Valve Covers
  • Fits Over Truck Center-Bolt Valve Covers
  • Sold as a pair
  • Fits Truck applications only
  • Stock OEM Truck Valve Covers Must Remain in Place & Reuse the Existing Hardware, Breathers, Fill Cap, PVC & Grommets
See More

Spectre – Valve Cover (Part No.5017)

Valve Cover

from

$299.99
Available in various sizes, heights, and finishes, Spectre offers a wide variety of high performance valve covers designed to easily replace your stock covers. Designed for 1987-1999 Chevrolet 305 and 1987-2000 Chevrolet 350 Center bolt engines, this valve cover features polished aluminum construction and a smooth design. Sold in pairs, this tall profile cover includes baffles and bolts to provide optimum function. With show quality construction and a sealing edge designed for an ideal fit, our valve covers are engineered to look great for applications ranging from custom builds to replacing stock equipment.

Product Features:
  • Designed for 1987-1999 Chevrolet 305 and 1987-2000 Chevrolet 350 Center bolt engines
  • Baffled for breather system compatibility
  • Sold in pairs
  • Polished aluminum construction
  • Tall profile
  • Features OEM style sealing edge
  • Includes bolts for installation
See More

Most Popular 1995 Chevrolet C3500HD Performance Ignition Products

Customize your Chevrolet with 2 Performance Ignition Products products like Performance Coils, all priced under $79.99.

MSD Ignition – Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation (Part No.5526)

Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation

from

$65.99
These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.

Product Features:
  • Replacement Coil For GM Dual Connector Coil
  • Improved Turns Ratio
  • Lower Primary Resistance
  • Bolt-In replacement coil
  • Produce More Output Voltage
  • Smooth Idle
See More

Accel – GM 1984-95 Remote Supercoil (Part No.140011)

GM 1984-95 Remote Supercoil

from

$79.99
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Compatible with late model GM computer controlled remote mount HEI systems. Direct bolt-in, plug-in replacement. Brass coil wire contact increases energy transfer and resists corrosion better than aluminum. Complete with new mounting hardware.

Product Features:
  • 10-15% More Energy
  • Direct Plug In Replacement Direct OE Fit
  • Advanced Bobbin Technology
  • Highly Specialized Silicone Magnetic Steel Cores
  • Standard Motor Products SMP DR-37
  • MSD 8226
  • Resist Corrosion
  • W/New Mounting Hardware
See More

Top Picks for 1995 Chevrolet C3500HD Performance Timing Covers

Upgrade Chevrolet C3500HDs with top-quality Performance Timing Covers parts, including 4 OEM and aftermarket selections for your 1995 model.

Mr. Gasket – Timing Tab (Part No.4598)

Timing Tab

from

$15.99
Bolts on with existing timing cover bolts. It is chrome plated steel, which makes is a better compliment to a chrome timing cover. It also has an adjustable red timing pointer. This allows for better visibility and helps you set your timing more easily. Just loosen the screw, set the pointer to the desired initial timing level, and screw it back down. Then you’ll be able to more clearly see if your timing is where you want it when checking your timing.

Product Features:
  • Bolts on using existing timing cover bolts
  • Chrome finish compliments chrome timing covers
  • Red adjustable pointer makes it easier to check timing
See More

Mr. Gasket – Timing Tab (Part No.4593)

Timing Tab

from

$8.79
Installs using stock timing cover bolts. Chrome plated steel is a much better compliment to a chromed timing cover. Has markings for 16 degrees before top dead center (BTDC) to 8 degrees after top dead center (ATDC).

Product Features:
  • Bolts on with existing timing cover bolts
  • Chrome plated steel is a much better compliment for chrome timing covers
  • Markings for 16 degrees BTDC to 8 degrees ATDC
See More

Mr. Gasket – Timing Tab W/Adjustable Pointer – Chrome Plated – For 7" Harmonic Balancers (Part No.4597)

Timing Tab W/Adjustable Pointer - Chrome Plated - For 7" Harmonic Balancers

from

$21.79
Bolts on with existing timing cover bolts. It is chrome plated steel, which makes is a better compliment to a chrome timing cover. It also has an adjustable red timing pointer. This allows for better visibility and helps you set your timing more easily. Just loosen the screw, set the pointer to the desired initial timing level, and screw it back down. Then you’ll be able to more clearly see if your timing is where you want it when checking your timing. Has markings from 12 degrees before top dead center (BTDC) to 8 degrees after top dead center (ATDC).

Product Features:
  • Bolts on using existing timing cover bolts
  • Chrome finish compliments chrome timing covers
  • Red adjustable pointer makes it easier to check timing
  • Timing marks from 12 degrees BTDC to 8 degrees ATDC
See More

Spectre – Aluminum Timing Pointer (Part No.4936)

Aluminum Timing Pointer

from

$64.99
Spectre’s timing tabs have an adjustable timing pointer to allow for a more accurate reading and they can work with any size harmonic balancer. Designed for Chevy small block engines, Spectre’s adjustable timing tabs have a polished aluminum finish so it will look great under your hood.

Product Features:
  • Polished aluminum finish
  • Designed for Chevy small block engines
  • Adjustable pointer allows for use with 6, 7, and 8 In. harmonic balancers
  • Installs easily where original tab mounts
See More

In-Demand Performance Engines for 1995 Chevrolet C3500HDs

Select from 19 premium Performance Engines parts for your 1995 Chevrolet C3500HD, with prices ranging from $15.49 to $1,322.99.

Mr. Gasket – Premium Quality Thermostat Gasket with Solid Aluminum Carrier (Part No.738G)

Premium Quality Thermostat Gasket with Solid Aluminum Carrier

from

$31.99
Edge molded rubber water outlet gasket is reusable, great for engines that require regular disassembling for maintenance. Incorporates solid aluminum carrier for strength and rigidity. Can be used with OE replacement or aftermarket chrome water outlets. Requires no gasket sealer.

Product Features:
  • Edge Molded Rubber Water Outlet Gasket Is Reusable
  • Requires No Gasket Sealer
  • Solid Aluminum Carrier For Strength/rigidity
  • Reusable – Ideal for Engines That Are Frequently Taken Apart & Reassembled
See More

Mr. Gasket – Intake Manifold Bolts (Part No.955G)

Intake Manifold Bolts

from

$15.49
These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.

Product Features:
  • Grade 5 socket head bolts are zinc plated for protection and appearance
  • Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds
  • Washers Included
See More

Mr. Gasket – Valve Cover Gasket Set (Part No.168)

Valve Cover Gasket Set

from

$42.49
Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.brbrThese gaskets are .187 inch thick. Fits Chevy 5.0, 5.7L Vortec V8 with center bolt valve covers.

Product Features:
  • Manufactured from high-density cork/rubber blend gasket material
  • Provides excellent sealing and durability
  • For OE replacement, high performance street, drag race and oval track
See More

Mr. Gasket – Precision Timing Tape (Part No.1588)

Precision Timing Tape

from

$21.79
Precision timing tape can be used on a factory balancer to create HP through accurate timing, and makes setting valve lash simple.

Product Features:
  • 6 3¿4″ diameter
  • 6 3┐4″ diameter
  • 305, 350 cu. in. 1969-93
  • Increased Performance
  • Set Valve Lash At Proper Time
See More

Mr. Gasket – Rear Main Seal Gasket (Part No.29)

Rear Main Seal Gasket

from

$42.49
This Mr. Gasket Rear Main Seal is made from Viton&reg: Rubber. This style of rubber can handle high temperature like silicone rubber, but with superior abrasion resistance. Its durability and it’s double, offset lip seal design make it recommended for applications that have high engine vacuum, like racing engines that utilize external vacuum pumps for crankcase evacuation.

Product Features:
  • Repairs That Leaky Rear Main Sail
  • Viton« Rubber Offers Both Abrasion Resistance & High Temperature Tolerance
  • Viton® Rubber Offers Both Abrasion Resistance & High Temperature Tolerance
  • Upgrade for Rope Seal Equipped Cars or Silicone Rubber Main Seals
See More

Spectre – Engine Dress Steel Up Kit (Part No.5428)

Engine Dress Steel Up Kit

from

$99.99
This Spectre engine dress-up kit was designed for the 1987 – 1995 Chevy 305 & 350 engines. This kit includes: stock height valve covers, chrome valve cover T-bolts, chrome oil filler cap, chrome PCV breather, grommets, and an air cleaner adapter stud. The air filter adapter stud, is a z-bolt that is designed to allow you to use a center stud style air cleaner assembly instead of the stock dual-stud setup. Manufactured using high quality materials this kit features triple chrome plated parts.

Product Features:
  • For 1987-1995 Chevrolet 305-350 engines
  • Includes stock height valve covers & T-bolts
  • Includes oil filler caps, pcv vent filter
  • Includes air cleaner Z-Stud
  • Chrome engine kit
See More

Mr. Gasket – Mls Head Gasket (Part No.3130G)

Mls Head Gasket

from

$111.99
Our unique Multi-Layered steel head gasket embossment formation process optimizes the embossment radius, reduces stress points, enhances gasket conformability, and provides uniform clamp load distribution. This all results in superior surface contact between block and cylinder head. All head gasket layers/spacers go through an additional process to significantly reduce forming induced stress. Advantages are reduced brittleness in material, increased flexibility and deformation retention. This stabilizes the gasket, resulting in reduced cylinder bore distortion and improved combustion seal fro the extreme cylinder pressures found in high compression, supercharged and turbocharged applications. A proprietary polymer coating ensures the micro-seal of engine coolant and oil fluids.brbrA typical MLS head gasket requires a smoother (30Ra) surface finish than composite head gaskets. Mr. Gasket’s proprietary polymer coating will seal a surface finish twice as rough (60Ra) as a typical MLS head gasket. For high performance street, drag race and oval track use.

Product Features:
  • Gasket bore – 4.060″ Thickness – .040″
  • Manufactured from 3-layer premium grade stainless steel and state of the art laser cutting
  • Optimized sealing embossments seals extreme cylinder pressure
  • Provides excellent stability and reduces cylinder bore distortion.
  • Proprietary polymer coating ensures the micro seal of engine coolant and oil fluids.
  • Ideal for supercharged, turbocharged, nitrous oxide and extreme compression ratio engines
  • For high-performance street, drag race and oval track use
See More

Mr. Gasket – Intake Gasket (Part No.116)

Intake Gasket

from

$40.19
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. They provide excellent sealing and durability. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.

Product Features:
  • Manufactured from cellulose/nitrile composition gasket material.
  • Provides excellent sealing and durability.
  • Can be trimmed if necessary for modified port applications.
  • Complete with manifold end seals and distributor gasket.
  • For OE replacement, high performance street, drag race and oval track use.
See More

Mr. Gasket – Intake Gasket (Part No.101B)

Intake Gasket

from

$28.99
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. They provide excellent sealing and durability. Can be trimmed if necessary for modified port applications. Complete with manifold end seals and distributor gasket (where applicable). For original equipment replacement, high performance street, drag race and oval track.

Product Features:
  • Manufactured from cellulose/nitrile composition gasket material
  • Provides excellent sealing and durability
  • Can be trimmed if necessary for modified port applications
  • Complete with manifold end seals and distributor gasket where applicable
  • For OE replacement, high performance street, drag race and oval track use
See More

Mr. Gasket – Ultra Seal: Screw-In Rocker Arm Studs (Part No.1076)

Ultra Seal: Screw-In Rocker Arm Studs

from

$65.99
Mr. Gasket screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street applications. OE style press in rocker studs can actually pull out of the cylinder head when using high lift camshafts. Includes sixteen studs 3/8-24 x 1.47 inch long top x 7/16-14 bottom.

Product Features:
  • Black Oxide Coated Grade 8 Steel
  • Kit Contains 16 Studs
  • Easy To Install
  • Heat Treated Steel
  • Grade 8 Steel
See More

Mr. Gasket – Intake Gasket (Part No.143)

Intake Gasket

from

$42.49
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.

Product Features:
  • Manufactured from cellulose/nitrile composition gasket material
  • Provides excellent sealing and durability
  • Die-cut for an excellent fit
  • Can be trimmed if necessary for modified port applications
  • For OE replacement, high performance street, drag race and oval track use
See More

Mr. Gasket – Timing Cover Seal (Part No.18)

Timing Cover Seal

from

$15.99
If you are changing your camshaft or replacing the timing set, make sure to replace this seal at the same time! Metal with Nitrile rubber seal.

Product Features:
  • Nitrile Rubber And High Density Cork
  • Will Not Shrink Or Stick
See More

Competition Cams – Thumpr 243/257 Hydraulic Flat Cam and Lifter Kit for Chevrolet Big Block 396-454 (Part No.CL11-602-4)

Thumpr 243/257 Hydraulic Flat Cam and Lifter Kit for Chevrolet Big Block 396-454

from

$1322.99
BIG BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.

Product Features:
  • Cam and lifter kit for Big Block Chevy engines
  • CL-Kit includes cam, lifters, assembly lube, instructions and decals
  • HYDRAULIC – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.
  • 295/312 Advertised Duration, 243/257 Duration @ .050″, .522″/.507″ Lift, 107 Lobe Separation
  • Valve spring upgrade required
See More

Competition Cams – Thumpr 227/241 Hydraulic Flat Cam (Part No.11-600-4)

Thumpr 227/241 Hydraulic Flat Cam

from

$542.99
HYDRAULIC – Thumpr: High performance street, stock converter ok, best with 2000+ converter and gears. Choppy/thumping idle.

Product Features:
  • HYDRAULIC – Thumpr: High performance street, stock converter ok, best with 2000+ converter and gears. Choppy/thumping idle.
  • 279/296 Advertised Duration, 227/241 Duration @ .050″, .498″/.483″ Lift, 107 Lobe Separation
  • Valve spring upgrade required
See More

Competition Cams – CAMSHAFT, BBC 280 MAGNUM HYD 1 EA (Part No.11-208-3)

CAMSHAFT, BBC 280 MAGNUM HYD 1 EA

from

$247.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts. Ideal for use with higher compression ratio engines that

Product Features:
  • Best with aftermarket torque converters and 9.5:1 compression.
  • Great high RPM power.
  • Easy on valve train parts.
  • Can be used with mild ratio rocker arms and traditional performance valve springs.
See More

Competition Cams – CAMSHAFT, BBC 280 MAGNUM HYDRAULIC 1 EA (Part No.11-202-3)

CAMSHAFT, BBC 280 MAGNUM HYDRAULIC 1 EA

from

$235.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications. Offering

Product Features:
  • Good blend of efficiency and performance.
  • Perfect choice for performance street rebuilds.
  • Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
See More

Mr. Gasket – Intake Bolt Kit (Part No.5003)

Intake Bolt Kit

from

$75.99
Finish your custom engine job with these show quality grade 5 chromed 12-point bolts, includes AN washers which have no exposed shoulder for a professional appearance. Includes (12) 3/8-16 x 1 inch bolts with (12) 3/8 inch AN washers.

Product Features:
  • Chrome plated
  • Grade 8
  • 12-point head
  • AN washers with no exposed shoulder for a professional appearance
See More

Mr. Gasket – Ultra Seal: Sure-Lock Rocker Arm Nuts (Part No.920G)

Ultra Seal: Sure-Lock Rocker Arm Nuts

from

$64.19
These are high quality nuts with allen set screws to provide you with that positive lock needed for Race or original equipment Rocker Arms.

Product Features:
  • They Are Zinc Dichromate Plated Steel
  • They Have Black Oxide Coated Set Screws
  • Keeps Rocker Arms Positively Locked
  • (16) Rocker Arm Nuts w/ Locks 3/8″-24 Threads
  • Includes Locks and Hex Wrench
  • Shank O.D. .603″
See More

Mr. Gasket – Advance And Retard Cam Bushings (Part No.85)

Advance And Retard Cam Bushings

from

$42.49
With Mr. Gasket cam degree bushings you fine tune the camshaft timing of your engine to as little as 1 degree. Even aftermarket timing sets with multiple keyways can’t give the range of adjustment these bushings allow. Retard your camshaft to lower the powerband for more low end torque and midrange horsepower, or advance for more top end power. This kit does even number adjustment 0-8 degrees.

Product Features:
  • Advance the cam for increased torque and horsepower
  • Tune your powerband for more end torque or increase top end horsepower
  • Includes (4) offset bushings and (1) 0 degree bushing
  • Cam sprocket dowel pin hole must be drilled to .406¿ (13/32¿) dia.
  • Cam sprocket dowel pin hole must be drilled to .406┐ (13/32┐) dia.
  • Increase Top-End Horsepower
See More

Most Sold 1995 Chevrolet C3500HD Performance Exhaust Products

Explore our best-selling Chevrolet parts for the 1995 C3500HD among 4 OEM and aftermarket options starting from $20.99.

Mr. Gasket – Performance Exhaust Gasket Set for Enhanced Sealing and Durability (Part No.150B)

Performance Exhaust Gasket Set for Enhanced Sealing and Durability

from

$20.99
Mr. Gasket Performance exhaust gasket material is a heavy duty material, .062 inch thick, consisting of an acrylic binder system to resist high temperature. This material is made for sealing exhaust applications. Provides excellent sealing and durability.

Product Features:
  • Manufactured from high-temperature acrylic blend exhaust material
  • Provides excellent sealing and durability
  • Can be trimmed if necessary for modified port applications
  • For OE replacement, high performance street, drag race and oval track use
  • Resists Deteriorating
  • Provides Excellent Torque Retention
See More

Mr. Gasket – Header Bolt Set (Part No.2210G)

Header Bolt Set

from

$41.99
Made of high quality stainless steel. These bolts will brighten up your hot rod, or improve the looks of your race car.

Product Features:
  • Bright Ball Burnish Finish
  • Made From 304 Stainless
  • Compact Hex Head Is Ideal Where Space Is Limited
  • 12 Per Set
  • Resist corrosion and provides a clean professional appearance
See More

Mr. Gasket – Chrome Low Mount Alternator Bracket – Small Block Chevy – Dress Up Your Engine! (Part No.5179)

Chrome Low Mount Alternator Bracket - Small Block Chevy - Dress Up Your Engine!

from

$72.39
Mr. Gasket small block Chevy lower alternator mounting kit designed to work with a short water pump. Made of heavy gauge chrome plated steel. Complete with all necessary mounting hardware. Designed to relocate the alternator to the lower left side of the motor. This mounting bracket will make your engine compartment look neat and sanitary. Possible cross member interference on some applications.

Product Features:
  • Alternator Relocating Kit
  • Heavy Gauge Chrome Plated Steel
  • All Necessary Hardware Included
  • Helps To Give Engine Compartment A Clean Look
  • Designed To Work With Short Style Water Pump
  • Possible Cross Member Interference On Some App
See More

Mr. Gasket – Exhaust Gaskets – Standard Duty – Small Block Chevy Square Port, 1.45"W X 1.48"H – Reusable (Part No.150C)

Exhaust Gaskets - Standard Duty - Small Block Chevy Square Port, 1.45"W X 1.48"H - Reusable

from

$36.49
Mr. Gasket Performance exhaust gasket material is a heavy duty material, .062 inch thick, consisting of an acrylic binder system to resist high temperature. This material is made for sealing exhaust applications. Provides excellent sealing and durability.

Product Features:
  • Manufactured from high-temperature acrylic blend exhaust material
  • Provides excellent sealing and durability
  • Can be trimmed if necessary for modified port applications
  • For OE replacement, high performance street, drag race and oval track use
See More

Top-Rated Performance and Racing Products Brands For Your 1995 Chevrolet C3500HD

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1995 Chevrolet C3500HDs. Below you’ll find some of our best rated Performance and Racing Products from MSD Ignition and Accel, and more. Performance and Racing Products from these brands that fit a 1995 C3500HD start at just $65.99 and are rated as high as 4.2 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular MSD Ignition 1995 Chevrolet C3500HD Performance and Racing Products

When it comes to maintaining or upgrading your 1995 Chevrolet C3500HD, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. MSD Ignition ticks all of those boxes. We offer a wide selection of MSD Ignition Performance and Racing Products, specifically designed for the 1995 Chevrolet C3500HD. With over 1 MSD Ignition brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $65.99. Plus, with over 7 customer reviews and an average rating of 4.2 stars, you can trust that our MSD Ignition Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Popular Accel 1995 Chevrolet C3500HD Performance and Racing Products

Accel auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1995 Chevrolet C3500HD owner should feel confident when installing genuine Accel parts in their vehicle. To ensure the best fit and performance for your 1995 C3500HD, Advance Auto Parts carries a full inventory of 1 Accel Performance and Racing Products. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Accel Performance and Racing Products range up to $79.99, plus, with more than 15 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
GM 1984-95 Remote Supercoil
from $79.99
(15)
GM 1984-95 Remote Supercoil
“Works great!”

FAQs for 1995 Chevrolet C3500HD Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1995 Chevrolet C3500HDs?

Out of 35 Performance and Racing Products that fit 1995 Chevrolet C3500HDs, the following parts are the top sellers:

What’s the price range for 1995 Chevrolet C3500HD Performance and Racing Products?

Performance and Racing Product prices for the 1995 Chevrolet C3500HD start at $8.79 and go up to $1,322.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1995 Chevrolet C3500HD?

The average price for Performance and Racing Products for the 1995 Chevrolet C3500HD is $145.22. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Chevrolet C3500HD model years?

Yes, we currently carry Performance and Racing Products for 10 model years of Chevrolet C3500HDs between 1991 and 2002. Performance and Racing Products are bought most frequently for the following model years: 2002, 2001, 2000, 1999, 1998, 1997, 1996, 1994, and 1993.

What are the cheapest Performance and Racing Products for my 1995 Chevrolet C3500HD?

The cheapest 1995 Chevrolet C3500HD Performance and Racing Products we carry in stock are:

What are the top-rated Performance and Racing Products that fit the 1995 Chevrolet C3500HD?

Out of 98 reviews by customers, our 1995 Chevrolet C3500HD Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1995 Chevrolet C3500HD and their top-rated products:

What types of Performance and Racing Products do you sell for my 1995 Chevrolet C3500HD?

Can I get help with 1995 Chevrolet C3500HD Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Performance and Racing Products and more.

What is your return policy for Chevrolet C3500HD Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Chevrolet C3500HD Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.