1995 BMW M3 Car Parts & Accessories

Valvoline MaxLife Multi-Vehicle ATF is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life.  Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi. Recommended for use in the following applications: GM DEXRON-II, DEXRON-III, DEXRON-VI, Ford MERCON LV, Toyota/Lexus Type T, T-II, T-IV, WS, Honda/Acura, ATF-Z1, Nissan/Infiniti Matic-D, Matic-J, Matric-K, Matic-S, Hyundai/Kia SP-II, SP-III, SP-IV, SPH-IV, BMW 7045E, ETL 8072B, LA2634, LT71141, Allison C-4, Mercedes Benz NAG-1, Volvo 1161521, 1161540, 97340, 1273.41, and VW/Audi G-052-025-A2, G-052-162-A1. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.

Product Features:

• Formulated with full-synthetic base oils and long life friction modifiers to help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
• High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

• Enhanced maxlife technology prevents engine breakdown in extreme conditions with 50% better wear protection than the industry standard
• Treat and prevent leaks with premium seal conditioners to keep oil out of places it shouldn’t be
• 25% extra defense against deposits, sludge, corrosion and rust via interior-cleansing detergents
• Extreme temperature protection through our high-quality base oils and superior viscosity modifiers
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
• High Mileage Protection: Valvoline Full Synthetic High Mileage Engine Oil is specially designed to protect engines with over 75,000 miles against wear, friction, heat, and deposits, ensuring a longer lifespan for your vehicle.

Valvoline Full Synthetic MaxLife Multi-Vehicle ATF, the No. 1 ATF product, suitable for use in 95% of vehicles. And now, it’s recommended for most belt & chain-driven continuously variable transmissions (CVT). Featuring advanced additives to prevent the major causes of transmission breakdown, it’s designed to help prevent leaks, reduce wear & tear, and maximize performance. Has improved thermal stability for longer fluid life, better viscosity stability for consistent transmission operation, and frictional enhancements for smooth gear engagements. Valv MaxLife Multi-Vehicle ATF is suitable for most Ford, GM, Toyota, Honda, Nissan, Hyundai, Subaru, BMW, Mercedes, Volvo, VW & Audi vehicles. Recommended for use in: GM DEXRON-II, DEXRON-III, DEXRON-VI, and DEX-CVT; Ford MERCON LV; Toyota/Lexus Type T, T-II, T-IV, WS, CVTF FE, and CVTF TC; Honda/Acura ATF-Z1 and Honda CVT; Nissan/Infiniti Matic-D, Matic-J, Matic-K and Matic-S; Hyundai/Kia SP-II, SP-III, SP-IV and SPH-IV; BMW 7045E, ETL 8072B, LA2634 and LT71141; Allison C-4; Mercedes-Benz NAG-1; Volvo 1161521, 1161540, 97340 and 1273.41; Subaru ATF HP, Lineartronic chain CVT and CVT-II, Lineartronic High Torque CVT, and CV-30; and VW/Audi G-052-025-A2 and G-052-162-A1. CURRENTLY UNABLE TO SHIP THIS PRODUCT TO CUSTOMERS LOCATED IN CALIFORNIA

Product Features:

• FOR USE IN 95% OF VEHICLES INCLUDING MOST CVTs in operation with US registered light duty applications
• HIGH PERFORMANCE CONDITIONING AGENTS prolong seal elasticity to prevent leaks
• IMPROVED DURABILITY & TRANSMISSION LIFE with anti-wear technology to avoid costly repairs
• ENHANCED HIGH & LOW TEMP PERFORMANCE supports transmission fluid in all weather situations

Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, MERCON LV and Allison C-4.

Product Features:

• Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

• MAXLIFE TECHNOLOGY PREVENTS engine breakdown with 40% better wear protection than the industry standard
• REFRESH AGING SEALS AND PREVENT LEAKS with seal conditioners
• REDUCE SLUDGE, DEPOSITS, CORROSION, AND RUST with added detergents – keep motors clean inside
• ENHANCED FRICTION PERFORMANCE HELPS MAXIMIZE POWER with advanced friction-fighting agents
• MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
• MaxLife Technology: Valvoline High Mileage with MaxLife Technology is specially formulated to maximize engine life in vehicles with over 75,000 miles, providing superior protection against wear, friction, heat, and deposits.
• Synthetic Blend Composition: This motor oil features a unique combination of synthetic and premium conventional oils, ensuring optimal performance and protection for high-mileage engines.

Today’s advanced engine technology requires advanced protection. Valvoline Advanced Full Synthetic, the motor oil designed to protect today’s sophisticated engines, contains premium anti-wear additives, superior antioxidants and extra detergents. It protects 40% better against wear, resists oil breakdown 10-times better, and defends 25% more against deposits than industry standards for maximum performance and engine longevity. And with an exceptional range of temperature protection your engine will ready for extreme weather. Valvoline invented motor oil 150 years ago, and we’ve been reinventing it ever since. Get Valvoline Advanced Full Synthetic and give your engine the advanced protection proven to maximize engine life.

Product Features:

• ADVANCED PROTECTION AGAINST the four main causes of engine breakdown: wear friction heat and deposits
• 40% BETTER WEAR PROTECTION vs. industry standard as tested in the Sequence IVB engine test
• 25% BETTER DEPOSIT PROTECTION with superior engine cleaning detergents as tested in the GMOD engine test
• EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your motor no matter the weather conditions
• MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN, GM dexos 1 Gen 3
• Enhanced Oil Stability: Resists oil breakdown 10-times better than industry standards, providing consistent performance and reliability.
• Premium Additives: Contains premium anti-wear additives, superior antioxidants, and extra detergents for maximum performance and engine longevity.

High Performance Motor Oil API LICENSED MOTOR OIL Royal Purple High Performance Motor Oil combines premium base oils with proprietary additive technologies to create a high performance synthetic engine oil that optimizes performance and protection. Royal Purple High Performance Motor Oils carry the current API and ILSAC engine oil licenses, as well as the GM dexos1 gasoline engine oil approval. ILSAC GF-6 AND GM DEXOS1 Modern gasoline direct injection (GDI) engines have achieved levels of power and fuel economy never before possible in passenger car engines. As a result, smaller engines operate at much higher loads across all engine speeds. This has caused increased wear in critical areas of the engine, and created a destructive phenomenon called low-speed pre-ignition (LSPI). The unique, state-of-the-art additive technology in Royal Purple High Performance engine oils is designed specifically to address these issues, and help engines maintain performance and reliability.

Product Features:

• Better Wear Protection
• Increased Protection against Low Speed Pre-Ignition
• Increased Fuel Efficiency
• Better Protection for Vehicle Exhaust Emissions Equipment
• Improved Compatibility with Fuels Containing Ethanol
• Superior Corrosion Protection
• Made in USA

Prestone Power Steering Fluid (PSF) delivers increased system life. Designed with Anti-wear System Protection, Prestone PSF protects against pump failure, squeals and clogs. This 50,000 mile fluid life is formulated for use in all manufacturers; cars, SUVs, crossovers, and light and medium duty trucks. This a conventional fluid. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.

Product Features:

• 50,000 Mile Fluid Life
• Anti-Wear Protection = Increased System Life. Protects against pump failure, squeals and clogs. Corrosion protection for metals, rubber and gasket components.
• For use in all manufacturers
• Conventional Formula – For use in all manufacturers

Valvoline Daily Protection Motor Oil is specially formulated to exceed industry standards for wear, deposit and sludge protection to help keep engines running like new. Developed with high quality additives and premium base oils, it’s designed to flow easily at cold temperatures, reducing wear at startup and providing added protection against motor oil breakdown in tough conditions. For enhanced fuel efficiency, choose Daily Protection Synthetic Blend 5W-20 or 5W-30. Developed with low-friction technology to support strong fuel economy.

Product Features:

• Extra wear protection designed to help keep automotive engine parts like new
• Added detergents help protect against sludge and deposits
• High quality additives resist motor oil breakdown in tough conditions
• Low-friction formula supports strong fuel efficiency
• Premium formulation flows easily at low temperatures reducing wear at start-up

Pentofrost NF is an environmentally friendly antifreeze concentrate for multipurpose applications in water-cooled engines. It does not contain any nitrites, amines or phosphorous containing additives. Pentofrost NF protects all material used in cooling systems and is recommended for non ferrous metals and year-round use. Meets ASTM D-3306. Warning: this product contains substances known to the state of California to cause birth defects or other developmental harm.

Product Features:

• Manufactured to the OE applications specific formulation.
• Manufactured to the exact spec of DIN and ASTM D-3306.
• Protects against corrosion and cavitation.
• Does not foam.

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency & longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

• MAXLIFE TECHNOLOGY PREVENTS engine breakdown with 40% better wear protection than the industry standard.
• REFRESH AGING SEALS AND PREVENT LEAKS with seal conditioners
• REDUCE SLUDGE, DEPOSITS, CORROSION, AND RUST with added detergents – keep motors clean inside
• ENHANCED FRICTION PERFORMANCE HELPS MAXIMIZE POWER with advanced friction-fighting agents
• MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
• MaxLife Technology: Valvoline High Mileage with MaxLife Technology is specially formulated to maximize engine life in vehicles with over 75,000 miles, providing superior protection against wear, friction, heat, and deposits.
• Synthetic Blend Composition: This motor oil features a unique combination of synthetic and premium conventional oils, ensuring optimal performance and protection for high-mileage engines.

Valvoline High Performance Synthetic Gear Oil is the thermally stabile extreme pressure lubricant that offers outstanding protection for gearboxes and differentials in passenger cars, light trucks, and sport utility vehicles. Combined with high quality synthetic base oils, our formula’s superior additives help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions. Can be used in conventional and limited slip hypoid differentials where GL-5 is specified as well as non-synchronized manual transmissions that require GL-4. Protect your gears with Valvoline, the #1 gear oil brand.

Product Features:

• HIGH PERFORMANCE EXTREME-PRESSURE ADDITIVES HELP MINIMIZE WEAR in high pressure and high temperature conditions
• EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION can easily handle both winter and summer conditions for dependable coverage and protection year-round
• REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
• FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
• SUPERIOR ADDITIVES help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions

Top Tec 4200 5W-30 Full Synthetic Engine Oil is engineered for exceptional performance and long-lasting engine protection. This low-SAPS oil is ideal for vehicles equipped with turbochargers and catalytic converters, ensuring smooth engine operation while reducing fuel consumption and pollutant emissions. Designed for compatibility with a wide range of Volkswagen, Audi, BMW, Mercedes-Benz diesel vehicles, and select Porsche models, it meets the demands of modern engines, including direct-injection gasoline and diesel systems like FSI, TDI, and common rail. Its advanced formula effectively minimizes deposit build-up, maintaining optimal engine performance and extending the life of diesel particulate filters (DPF). Perfect for vehicles with extended oil change intervals, it offers a cost-effective and convenient solution for long-term use. Made in Germany, this 5W-30 full synthetic oil delivers reliability, durability, and value, making it an excellent choice for drivers seeking to maximize engine efficiency and reduce maintenance costs.

Product Features:

• 
  
  

Product Features:

• ideal with turbochargers and catalytic converters
• reduces pollutant emissions
• Smooth engine running
• reduces fuel consumption
• Made in Germany
• Reduces Deposits: Effectively reduces the build-up of troublesome deposits in direct-injection gasoline and diesel engines (FSI, TDI, common rail, etc.), maintaining optimal engine performance.
• Extended Oil Change Intervals: Specifically designed for vehicles with extremely long oil change intervals (WIV, etc.), making it a cost-effective and convenient choice for long-term use.
• Maximizes DPF Life: Assures reliable operation and maximizes the operating life of the diesel particulate filter (DPF), contributing to lower maintenance costs and enhanced vehicle longevity.

Valvoline Import Multi-Vehicle Automatic Transmission Fluid is specifically formulated for use in most Toyota, Nissan, Honda and other imported vehicles. It is formulated with all synthetic base stocks and a proprietary additive system to ensure optimal transmission performance in a wide variety of vehicles. Valvoline Import Multi-Vehicle ATF can also be used in many domestic vehicles. It meets requirements of General Motors and Ford vehicles. Recommended for use in the following applications: Ford MERCON, GM DEXRON-II and DEXRON-III, BMW LT 71141 and ETL-7045E, Nissan/Infiniti Nissan ATF, Matic-D, Matic-K and Matic-J, Mitsubishi Diamond SP-II and SP-III, Subaru ATF-HP, Hyundai/ KIA SP-II and SP-III, Toyota/Lexus Type T, T-III and T-IV, Honda/Acura ATF-Z1 (except in CVTs), Mercedes Benz NAG1, Volvo passenger car (except AW-1), and Volkswagen/Audi TL52162. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.

Product Features:

• Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Valvoline Import Multi-Vehicle Automatic Transmission Fluid is specifically formulated for use in most Toyota, Nissan, Honda and other imported vehicles. It is formulated with all synthetic base stocks and a proprietary additive system to ensure optimal transmission performance in a wide variety of vehicles. Valvoline Import Multi-Vehicle ATF can also be used in many domestic vehicles. It meets requirements of General Motors and Ford vehicles. Recommended for use in the following applications: Ford MERCON®, GM DEXRON®-II and DEXRON®-III, BMW LT 71141 and ETL-7045E, Nissan/Infiniti Nissan ATF, Matic-D, Matic-K and Matic-J, Mitsubishi Diamond SP-II and SP-III, Subaru ATF-HP, Hyundai/ KIA SP-II and SP-III , Toyota/Lexus Type T, T-III and T-IV , Honda/Acura ATF-Z1 (except in CVTs) , Mercedes Benz NAG1 , Volvo passenger car (except AW-1), and Volkswagen/Audi TL52162. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.

Product Features:

• Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Liqui Moly’s Leichtlauf High Tech 5W-40 is a fully synthetic, premium low-friction engine oil for all-season use in gasoline and diesel engines without diesel particulate filters (DPF). The combination of innovative base oils – based on synthesis technology and the latest additive technology – guarantees an engine oil that reduces oil and fuel consumption and that ensures fast lubrication of the engine. Depending on the manufacturer instructions, oil change intervals of up to 40,000 km are possible. Ideally suited for modern gasoline and diesel engines with multi-valve technology, turbocharger and with or without charge air cooling. Especially suitable where there are long intervals between changes and heavy duty engine requirements.

Product Features:

• All season use reliable at high and low temperatures
• Suited for modern gasoline and diesel engines with multivalve technology, turbocharger and with or without charge air cooling
• An engine oil that reduces oil and fuel consumption
• Ensures fast lubrication of the engine
• Made in germany
• Full Synthetic Oil Composition

Pentosin Super DOT 4 is a brake fluid of superior quality for universal use in modern brake systems and ideal for vehicles with ABS systems. Pentosin Super DOT 4 offers safety against vapor lock; it has excellent resistance to absorbing and retaining water and provides superior corrosion resistance.

Product Features:

• Safety against vapor lock
• Provides superior corrosion resistance
• Long-term resistance to absorbing and retaining water.

High-tech low-friction motor oil based on synthetic technology. Ensures excellent engine cleanliness and exceeds even the strictest test requirements of well-known vehicle manufacturers. Reduces the build-up of troublesome deposits in direct-injection gasoline and diesel engines (FSI, TDI, common rail, etc.) and keeps oil consumption low. Assures reliable operation and maximizes the operating life of the diesel particulate filter (DPF). Specifically for vehicles with extremely long oil change intervals (WIV, etc.). Outstanding protection against wear, reduces oil and fuel consumption and ensures fast oil penetration of the engine.

Product Features:

• Outstanding protection against wear
• Reduces oil and fuel consumption
• Ensure fast oil penetration of the engine
• High tech low friction based on synthetic technology
• Made in germany
• Full Synthetic Oil Composition

Transmax Full Synthetic ATF is a premium, low-viscosity automatic transmission fluid engineered to optimize performance and fuel efficiency in modern vehicles. Its full synthetic formulation ensures enhanced friction durability for smooth and reliable transmission operation, while superior high-temperature protection resists oxidation and copper corrosion for long-lasting performance. OEM-approved and licensed by Ford (MERCON® LV) and GM (DEXRON®-VI), this fluid meets stringent industry specifications, including JASO-1A, making it compatible with all GM vehicles requiring DEXRON®-VI or earlier versions, as well as Ford vehicles specifying Mercon® LV. Designed to deliver unsurpassed protection and efficiency, this 1-quart solution is ideal for drivers seeking maximum reliability and fuel economy in their automatic transmissions.

Product Features:

• Full Synthetic, low viscosity formulation
• OEM approved and licensed by Ford (MERCON® LV) and GM (DEXRON® -VI)
• Low viscosity formula for maximum fuel efficiency in modern automatic transmissions
• Enhanced friction durability for smooth transmission performance
• Superior high temperature protection to effectively resist oxidation
• Unsurpassed protection against copper corrosion
• Industry Specifications and OEM Approvals: JASO-1A
• Licensed and approved for use in: All GM vehicles (DEXRON®-VI, All previous DEXRON®); All Ford vehicles which specify Mercon® LV

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

• MAXLIFE TECHNOLOGY PREVENTS engine breakdown with 40% better wear protection than the industry standard
• REFRESH AGING SEALS AND PREVENT LEAKS with seal conditioners
• REDUCE SLUDGE, DEPOSITS, CORROSION, AND RUST with added detergents – keep motors clean inside
• ENHANCED FRICTION PERFORMANCE HELPS MAXIMIZE POWER with advanced friction-fighting agents
• MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN

Prestone Power Steering Fluid + Stop Leak (PSF+SL) delivers increased system life and prevents and stops system leaks. Stop Leak additives renew, restore and condition seals in the power steering system. These seals harden and shrink over time which are the likely cause of leaks. The stop leak additives also prevent leaks by rejuvenating seals before they leak. Also designed with Anti-wear System Protection, Prestone PSF+SL protects against pump failure, squeals and clogs. This 50,000 mile fluid life is formulated for use in all manufacturers; cars, SUVs, crossovers, and light and medium duty trucks. This a conventional fluid. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.

Product Features:

• 50,000 Mile Fluid Life
• Includes Stop Leak Additives to prevent and stop power steering system leaks.
• Anti-Wear Protection = Increased System Life. Protects against pump failure, squeals and clogs. Corrosion protection for metals, rubber and gasket components.
• Conventional Formula – For use in all manufacturers

Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:

• Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
• Formulated to help prevent gear wear and protect against rust and corrosion
• Formulated to deliver enhanced protection against deposits
• Helps provide better protection during extreme operating conditions

Special Tec LL 5W-30 Full Synthetic Engine Oil is engineered to deliver exceptional performance and long-lasting engine protection for both gasoline and diesel vehicles without particulate filters. This premium, fully synthetic oil is designed to meet and exceed the stringent requirements of major manufacturers, making it ideal for modern engines equipped with turbochargers and catalytic converters. With its high lubrication reliability, outstanding engine cleanliness, and optimum stability to aging, this oil ensures your engine runs smoothly under all conditions. Its advanced formulation helps keep oil consumption low while supporting extended oil change intervals as recommended by your vehicle’s manufacturer. Made in Germany, this SAE 5W-30 oil offers superior all-season performance, ensuring your engine stays protected and efficient year-round.

Product Features:

• 
  
  

Product Features:

• ideal with turbochargers and catalytic converters
• high lubrication reliability
• outstanding engine cleanliness
• optimum stability to aging
• Keep oil consumption low
• Made in germany

Certified A/C Pro R-134a PAG 100 Refrigerant Oil with ICE 32. This product contains approximately 8 fluid ounces of PAG refrigerant oil with ICE32. Medium viscosity PAG oil for R-134a auto A/C systems; ISO 100 viscosity. R-134a PAG 100 AC Oil Lubricant with ICE32 Lubricant Enhancer features advanced chemistry to help extend compressor life and improve cooling capacity. The PAG oil helps quiet noisy compressors. Meets OEM specifications.

Product Features:

• Medium viscosity PAG oil for R-134a auto A/C systems; ISO 100 viscosity
• ICE32 Lubricant Enhancer: advanced chemistry to help extend compressor life and improve cooling capacity
• Meets OEM specifications

Castrol EDGE High Mileage 5W-30 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.

Product Features:

• 
  
  

Product Features:

• Phosphorus Replacement Technology to help extend the life of the emission system
• Reduces leaks, oil burnoff and power robbing deposits
• 15,000 miles between oil changes (1)
• (1) Or one year, whichever comes first
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6
• Meets Ford WSS-M2C947-B1
• Meets engine test requirements of Chrysler MS 6395
• Meets Ford WSS-M2C961-A1

Castrol® GTX® High Mileage 5W-30 Synthetic Blend Engine Oil is the ultimate choice for extending the life of high-mileage engines. Designed with advanced Phosphorus Replacement Technology, it safeguards emission systems by reducing catalytic converter damage while delivering superior dispersancy to combat sludge buildup. This premium synthetic blend offers exceptional protection against oil burn-off, surpassing industry standards, and features seal conditioners to help minimize leaks. Engineered with advanced additives, it reduces engine wear and improves fuel economy in 5W-20, 5W-30, and 10W-30 grades. Meeting or exceeding API SP/SN PLUS/SN/SM and ILSAC GF-6 specifications, as well as Ford WSS-M2C946-B1 and WSS-M2C961-A1 standards, this oil ensures reliable performance and compatibility with a wide range of vehicles. Perfect for drivers seeking durability and efficiency, this 5-quart solution is tailored to keep engines running smoothly while protecting against wear and sludge for long-lasting value.

Product Features:

• 
  
  

Product Features:

• Phosphorus Replacement Technology helps extend emission system life
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (1)
• Seal conditioners to help reduce leaks
• Advanced additives that minimize engine wear
• Improved fuel economy (2)
• (1) Based on API and ACEA volatility specifications
• Meets or exceeds the following specifications:
• (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
• API SP/SN PLUS/SN/SM
• ILSAC GF-6
• Meets Ford WSS-M2C946-B1
• Meets Ford WSS-M2C961-A1

Valvoline High Performance Gear Oil is an extreme pressure gear lubricant formulated with quality base oils and superior additives that helps protect against severe temperatures, shock loads, scuffing, scouring, corrosion and pitting in high speed, high load, high torque and high horsepower conditions.

Product Features:

• Formulated for reliable gear protection
• Protects against severe temperatures to help extend service life
• Formulated with extreme-pressure additives to minimize gear wear from shock loads
• Helps protect against gear wear from scuffing, scouring, corrosion and pitting
• Recommended for conventional hypoid differentials and non-synchronized manual transmissions in passenger cars, light trucks, sport utility vehicles, vans and heavy-duty trucks where an API-GL5 or GL-4 fluid is specified
• PLEASE NOTE: Valvoline recommends SynPower Full Synthetic Gear Oil for limited slip differentials

Castrol® GTX® High Mileage 5W-20 Synthetic Blend Engine Oil is the ultimate choice for extending the life of high-mileage engines. Designed with advanced Phosphorus Replacement Technology, it safeguards emission systems by reducing catalytic converter damage while delivering superior dispersancy to combat sludge buildup. This premium synthetic blend offers exceptional protection against oil burn-off, surpassing industry standards, and features seal conditioners to minimize leaks, ensuring optimal engine performance. Enhanced with advanced additives, it reduces engine wear and improves fuel economy in 5W-20, 5W-30, and 10W-30 grades. Meeting or exceeding specifications like API SP/SN PLUS/SN/SM, ILSAC GF-6, and Ford WSS-M2C945-B1/WSS-M2C960-A1, this oil is engineered for reliability and durability. Perfect for drivers seeking long-lasting engine protection, it delivers unmatched value in a convenient 5-quart size.

Product Features:

• 
  
  

Product Features:

• Phosphorus Replacement Technology to help extend the life of the emission system
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (1)
• Seal conditioners to help reduce leaks
• Advanced additives that minimize engine wear
• Improved fuel economy (2)
• (1) Based on API and ACEA volatility specifications
• (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6
• Meets Ford WSS-M2C945-B1
• Meets Ford WSS-M2C960-A1

Castrol EDGE 5W-30 Full Synthetic Motor Oil is engineered for drivers seeking peak engine performance and unmatched protection. With a formula that is 3X stronger against viscosity breakdown and delivers 10X better high-stress performance, this oil ensures your engine operates smoothly under demanding conditions. Designed for extended use, it offers up to 20,000 miles or one year between oil changes, making it a cost-effective choice for long-term reliability. Its advanced composition exceeds API SQ/SP/SN PLUS/SN standards and meets stringent requirements from Chrysler and Ford, ensuring compatibility with a wide range of vehicles. The 5W-30 weight provides optimal viscosity control and thermal stability, enhancing fuel economy and safeguarding against sludge buildup. Whether you’re navigating high temperatures or heavy loads, this full synthetic oil delivers superior wear protection and performance in critical areas, making it the ultimate solution for maintaining your engine’s health and efficiency.

Product Features:

• 
  
  

Product Features:

• 3X Stronger than the leading full synthetic (1)
• 10X Better high stress performance (2)
• 20,000 miles between oil changes (3)
• (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
• (2) As measured in Seq IX test under high load/torque conditions vs. API SQ test limits
• (3) Or one year, whichever comes first
• Approved and Licensed Specifications:
• Exceeds API SQ/SP/SN PLUS/SN
• ILSAC GF-7
• Meets engine test requirements of Chrysler MS 6395
• Meets Ford WSS-M2C945-B1
• Meets Ford WSS-M2C960-A1
• Meets Ford WSS-M2C961-A1

When the going gets tough, the tough get Valvoline Premium Blue. This premium heavy duty engine oil features proprietary One Solution GEN2 Technology designed to protect hardworking diesel, gasoline and natural gas engines in both on-highway and off-highway applications. Our patented, formula is engineered to outperform: resisting oxidation, deposits, corrosion and wear better than industry standards. No wonder it’s The Only One exclusively endorsed and recommended by Cummins for both on road and off highway applications. It’s specially formulated for faster and safer cold starts and has enhanced thermal properties for hot weather operations to help ensure year-round performance. Plus, extended drain intervals reduce oil changes so your engine can work longer between downtime.

Product Features:

• EXCELLENT WEAR PROTECTION IN HEAVY DUTY APPLICATIONS that can take a toll on critical internal moving parts
• RESISTS OXIDATION AND FIGHTS DEPOSITS with high quality base oils and special inhibitors
• PROTECTS DURING COLD START UPS WHILE CONTROLING SOOT as heavy-duty equipment can sit idle for extended periods of time
• PROPRIETARY ONE SOLUTION GEN2 TECHNOLOGY designed to protect hardworking diesel, gasoline and natural gas engines in both on-highway and off-highway applications
• UNIQUE 5,000 MILES OIL DRAINS EXTENSION in Cummins X15/X12 engines when average is 7mpg or higher

Castrol EDGE 5W-20 Full Synthetic Motor Oil is engineered for drivers seeking top-tier engine performance and protection. This advanced formula delivers 3X stronger viscosity breakdown resistance compared to leading full synthetics, ensuring durability under extreme conditions. With 10X better high-stress performance and the ability to last up to 20,000 miles or one year between oil changes, it offers exceptional value and convenience. Designed to excel in 7 critical areas, including fuel economy, high-temperature performance, sludge control, and wear protection, it meets or exceeds stringent industry standards such as API SQ/SP/SN PLUS/SN and ILSAC GF-7. Additionally, it fulfills the engine test requirements of Chrysler MS 6395 and Ford WSS-M2C945-B1/WSS-M2C960-A1, making it a reliable choice for a wide range of vehicles. With its 5W-20 SAE weight and full synthetic composition, this oil ensures optimal viscosity control and thermal stability, maximizing engine efficiency and longevity.

Product Features:

• 
  
  

Product Features:

• 3X Stronger than the leading full synthetic (1)
• 10X Better high stress performance (2)
• 20,000 miles between oil changes (3)
• (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
• (2) As measured in Seq IX test under high load/torque conditions vs. API SQ test limits
• (3) Or one year, whichever comes first
• Approved and Licensed Specifications:
• Exceeds API SQ/SP/SN PLUS/SN
• ILSAC GF-7
• Meets engine test requirements of Chrysler MS 6395
• Meets Ford WSS-M2C945-B1
• Meets Ford WSS-M2C960-A1

Castrol® GTX® High Mileage 10W-30 Synthetic Blend Motor Oil is the ultimate choice for extending the life of high-mileage engines. Designed with advanced Phosphorus Replacement Technology, it safeguards your vehicle’s emission system while meeting or exceeding API SP and ILSAC GF-6 standards. This premium synthetic blend offers superior dispersancy to combat sludge buildup, exceptional oil burn-off protection that surpasses industry benchmarks, and advanced additives to minimize engine wear. Its seal conditioners help reduce leaks, ensuring optimal engine performance over time. Engineered for improved fuel economy in 10W-30 grades, this motor oil is perfect for drivers seeking reliability and efficiency. With a 5-quart capacity, it delivers outstanding value and peace of mind for your high-mileage vehicle.

Product Features:

• 
  
  

Product Features:

• Phosphorus Replacement Technology helps extend emission system life
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (1)
• Seal conditioners to help reduce leaks
• Advanced additives that minimize engine wear
• Improved fuel economy (2)
• (1) Based on API and ACEA volatility specifications
• (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6

Castrol EDGE 5W-30 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrol’s strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.

Product Features:

• 
  
  

Product Features:

• 3X Stronger than the leading full synthetic (1)
• 10X Better high stress performance (2)
• 20,000 miles between oil changes (3)
• (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
• (2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
• (3) Or one year, whichever comes first
• Approved and Licensed Specifications:
• ILSAC GF-6
• Exceeds API SP/SN PLUS/SN/SM
• GM dexos1 Gen 3
• Meets engine test requirements of Chrysler MS 6395
• Meets Ford WSS-M2C946-B1
• Meets Ford WSS-M2C961-A1

Castrol EDGE High Mileage 5W-30 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.

Product Features:

• 
  
  

Product Features:

• Phosphorus Replacement Technology to help extend the life of the emission system
• Reduces leaks, oil burnoff and power robbing deposits
• 15,000 miles between oil changes (1)
• (1) Or one year, whichever comes first
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6
• Meets engine test requirements of Chrysler MS 6395
• Meets Ford WSS-M2C946-B1
• Meets Ford WSS-M2C961-A1

Castrol® GTX® 5W-30 is a synthetic blend motor oil with a double-action formula proven to clean away the sludge that can block engine oilways (1) and help prevent new sludge formation. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. (1) When tested in engines with a high level of sludge

Product Features:

• Premium-quality base oils and anti-wear additives that help extend engine life
• Superior protection against engine sludge
• Advanced protection against viscosity and thermal breakdown
• Superior protection against high-temperature deposits
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6
• Meets Ford WSS-M2C961-A1
• Meets Ford WSS-M2C946-B1

Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

• 
  
  

Product Features:

• Enhanced maxlife technology prevents engine breakdown in extreme conditions with 50% better wear protection than the industry standard
• Treat and prevent leaks with premium seal conditioners to keep oil out of places it shouldn’t be
• 25% extra defense against deposits, sludge, corrosion and rust via interior-cleansing detergents
• Extreme temperature protection through our high-quality base oils and superior viscosity modifiers
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
• Extends engine life: MaxLife High Mileage Full Synthetic Oil is designed to extend the life of higher mileage vehicles, providing superior protection against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs

Castrol EDGE 5W-20 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrol’s strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.

Product Features:

• 
  
  

Product Features:

• 3X Stronger than the leading full synthetic (1)
• 10X Better high stress performance (2)
• 20,000 miles between oil changes (3)
• (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
• (2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
• (3) Or one year, whichever comes first
• Approved and Licensed Specifications:
• ILSAC GF-6
• Exceeds API SP/SN PLUS/SN/SM
• Meets engine test requirements of Chrysler MS 6395
• Meets Ford WSS-M2C945-B1
• Meets Ford WSS-M2C960-A1

Castrol® GTX® High Mileage 5W-30 Synthetic Blend Motor Oil is the ultimate choice for extending the life of high-mileage engines. Designed with advanced Phosphorus Replacement Technology, it safeguards emission systems by reducing catalytic converter damage while delivering exceptional protection against sludge, wear, and oil burn-off. This synthetic blend exceeds industry standards for volatility and dispersancy, ensuring your engine stays cleaner and performs better over time. With seal conditioners to minimize leaks and advanced additives to reduce engine wear, it’s engineered to keep your vehicle running smoothly. Compatible with API SP/SN PLUS/SN/SM and ILSAC GF-6 specifications, it meets Ford WSS-M2C946-B1 and WSS-M2C961-A1 standards, making it a reliable choice for a wide range of vehicles. Additionally, its improved fuel economy in 5W-30 grade adds value by optimizing performance and efficiency. Perfect for drivers seeking durability and superior engine protection in a convenient 1-quart size.

Product Features:

• 
  
  

Product Features:

• Phosphorus Replacement Technology helps extend emission system life
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (1)
• Seal conditioners to help reduce leaks
• Advanced additives that minimize engine wear
• Improved fuel economy (2)
• (1) Based on API and ACEA volatility specifications
• (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6
• Meets Ford WSS-M2C946-B1
• Meets Ford WSS-M2C961-A1

Castrol® GTX® High Mileage 5W-20 Synthetic Blend Motor Oil is the ultimate choice for extending engine life in high-mileage vehicles. Engineered with advanced Phosphorus Replacement Technology, it safeguards emission systems by reducing catalytic converter damage. This premium synthetic blend offers superior dispersancy to combat sludge buildup, exceptional protection against oil burn-off, and advanced additives to minimize engine wear. Seal conditioners work to reduce leaks, while its formulation improves fuel economy, meeting stringent API SP, ILSAC GF-6, and Ford specifications. Designed to exceed industry standards, this 5W-20 motor oil ensures reliable performance and durability, making it a smart investment for maintaining your vehicle’s efficiency and longevity.

Product Features:

• 
  
  

Product Features:

• Phosphorus Replacement Technology helps extend emission system life
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (1)
• Seal conditioners to help reduce leaks
• Advanced additives that minimize engine wear
• Improved fuel economy (2)
• (2) Based on API and ACEA volatility specifications
• (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6
• Meets Ford WSS-M2C945-B1
• Meets Ford WSS-M2C960-A1

Castrol® GTX® 10W-30 is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life.

Product Features:

• Advanced protection against viscosity and thermal breakdown
• Superior protection against engine sludge
• Premium quality base oils and anti-wear additives to help extend the life of your engine
• Helps minimize oil consumption
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6

Today’s advanced engine technology requires advanced protection. Valvoline Advanced Full Synthetic, the motor oil designed to protect today’s sophisticated engines, contains premium anti-wear additives, superior antioxidants and extra detergents. It protects 40% better against wear, resists oil breakdown 10-times better, and defends 25% more against deposits than industry standards for maximum performance and engine longevity. And with an exceptional range of temperature protection your engine will ready for extreme weather. Valvoline invented motor oil 150 years ago, and we’ve been reinventing it ever since. Get Valvoline Advanced Full Synthetic and give your engine the advanced protection proven to maximize engine life.

Product Features:

• Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
• 40% better wear protection vs. industry standard as tested in the sequence ivb engine test
• 25% better deposit protection with superior engine cleaning detergents as tested in the gmod engine test
• Exceptional high/low temperature protection defends your motor no matter the weather conditions
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn, gm dexos 1 gen 3
• Superior engine protection: Valvoline SynPower Full Synthetic Engine Oil provides superior protection against engine sludge and varnish, ensuring your engine stays clean and running smoothly.

Environmental factors such as poor fuel quality, hot weather and stop-start driving conditions can lead to sludge, varnish and carbon build-up in your engine: three factors that reduce engine life, power and fuel economy. Castrol Ultraclean is a synthetic blend engine oil available in 0W-20, 5W-20 and 5W-30 grades. Its double-action formula has been proven to clean away the sludge that can block engine oilways and helps prevent new sludge formation thanks to its synthetic technology. In fact, it provides up to 1.4X better sludge protection than is demanded by the latest industry standard. If keeping your engine clean is important to you, it’s good to know that no other oil keeps engines cleaner.

Product Features:

• 1.4X superior sludge protection compared to tough industry standards (As measured in the Sequence VH Sludge test vs. API SP test limits)
• Advanced protection against viscosity and thermal breakdown
• Superior protection against high-temperature deposits
• Premium-quality base oils and anti-wear additives that help extend the life of your engine
• Double-Action Formula: The synthetic blend engine oil features a double-action formula that effectively cleans away existing sludge and prevents new sludge formation.
• Versatile Grades: Available in 0W-20, 5W-20, and 5W-30 grades, Castrol Ultraclean caters to various engine requirements and driving conditions.
• Enhanced Engine Performance: By reducing sludge, varnish, and carbon build-up, this oil helps improve engine life, power, and fuel economy.
• Synthetic Blend Composition: The GTX Ultraclean 5W-20 Synthetic Blend Motor Oil combines the benefits of synthetic technology with the reliability of a standard oil class.

Valvoline SAE 75W-90 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our detergent package-based formulation contains Full Synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance. Protect your gears with Valvoline, the No. 1 gear oil brand.

Product Features:

• EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION , ranging from -30F to 300F degrees
• REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
• FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
• MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP HYPOID DIFFERENTIALS where APPI GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
• MEETS OR EXCEEDS THE PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360

Castrol® GTX® 5W-20 is a synthetic blend motor oil with a double-action formula proven to clean away the sludge that can block engine oilways (1) and help prevent new sludge formation. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. (1) When tested in engines with a high level of sludge

Product Features:

• Premium-quality base oils and anti-wear additives that help extend engine life
• Superior protection against engine sludge
• Advanced protection against viscosity and thermal breakdown
• Superior protection against high-temperature deposits
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6
• Meets Ford WSS-M2C945-B1
• Meets Ford WSS-M2C960-A1

Castrol® GTX® 10W-30 is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life.

Product Features:

• Advanced protection against viscosity and thermal breakdown
• Superior protection against engine sludge
• Premium quality base oils and anti-wear additives to help extend the life of your engine
• Helps minimize oil consumption
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6

Castrol® GTX® High Mileage 10W-30 Synthetic Blend Motor Oil is the ultimate choice for extending the life of high-mileage engines. Designed with advanced Phosphorus Replacement Technology, it safeguards your vehicle’s emission system while meeting API SP/SN PLUS/SM and ILSAC GF-6 standards. This premium synthetic blend offers superior dispersancy to combat sludge buildup, exceptional oil burn-off protection that exceeds industry standards, and advanced additives to minimize engine wear. Its seal conditioners help reduce leaks, making it ideal for aging engines, while its formulation supports improved fuel economy in 10W-30 grades. Engineered to deliver reliable performance, this motor oil ensures your engine stays cleaner, runs smoother, and lasts longer, all in a convenient 1-quart size.

Product Features:

• 
  
  

Product Features:

• Phosphorus Replacement Technology to help extend the life of the emission system
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (1)
• Seal conditioners to help reduce leaks
• Advanced additives that minimize engine wear
• Improved fuel economy (2)
• (1) Based on API and ACEA volatility specifications
• (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SM
• ILSAC GF-6

Castrol EDGE 10W-30 Full Synthetic Motor Oil is engineered for drivers seeking peak engine performance and unmatched protection. This advanced oil offers 3X stronger viscosity breakdown resistance compared to leading synthetics, ensuring durability under extreme conditions. With 10X better high-stress performance and the ability to last up to 20,000 miles or one year between changes, it delivers exceptional value and reliability. Formulated to excel in seven critical areas, including fuel economy, high-temperature performance, sludge control, and wear protection, it meets and exceeds API SQ/SP/SN PLUS/SN and ILSAC GF-7 standards. Designed with full synthetic composition and a 10W-30 SAE weight, this oil provides superior thermal stability and viscosity control, making it ideal for modern engines demanding high performance and long-lasting protection.

Product Features:

• 
  
  

Product Features:

• 3X Stronger than the leading full synthetic (1)
• 10X Better high stress performance (2)
• 20,000 miles between oil changes (3)
• (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
• (2) As measured in Seq IX test under high load/torque conditions vs. API SQ test limits
• (3) Or one year, whichever comes first
• Approved and Licensed Specifications:
• Exceeds API SQ/SP/SN PLUS/SN
• ILSAC GF-7

Max Gear is recommended for truck and automotive differentials, outboard motor lower units or in rear axles or manual transmissions requiring an API fluid. Max Gear is a high performance automotive gear oil designed to provide maximum protection to heavily loaded gears while increasing power throughput through the drive train. Max Gear virtually eliminates both gear and bearing wear-even under severe squeeze film conditions caused by extremely high loads, sudden shock loads or low RPMs. Slippery, synthetic molecules not only reduce wear and friction but significantly increase Max Gear’s cold weather fluidity and lubricity, making it the ideal choice for vehicles operating in cold climates. Gears run smoother, quieter, cooler and longer without overhauls. It is noncorrosive to both ferrous and nonferrous metals.

Product Features:

• Maximizes horsepower
• Extends gear and bearing life
• Reduces operating temperature
• Lower coefficient of friction
• Superior corrosion protection
• Separates rapidly from water
• For use with open, limited-slip and locking differential
• Contains limited-slip friction modifier
• Made in USA

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Easy and fast replacement
• Prevents noise and premature wear
• Provides longer brake life and performance

Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Increases the life span of the brake pads
• Restores brakes to like-new performance
• Prevents noise and premature wear
• Direct replacement for a proper fit

The Wearever brand offers a complete line of quality products that are appealing alternatives to higher priced brands without sacrificing quality, durability or performance. Wearever Brake Pad Wear Sensors offer an OE safety feature designed to warn the driver when a brake pad is worn or at the end of its life cycle.

Product Features:

• Triggers a warning light on the dashboard
• Should be replaced each time the brake pad is replaced
• Not available for all makes and models, refer to your vehicle’s owner Manual to validate the number of brake pad wear sensors are required, when applicable

Carquest Premium rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Premium rotors are designed for long-lasting and quiet braking with superior performance

Product Features:

• Meets or exceeds OE design for superior stopping power
• Exceeds ISO manufacturing guidelines (International Organization for Standardization)
• Matches OE vane size for proper cooling
• Optimal metallurgy and casting thickness to preventing warping
• Air gap eliminates brake fade and increases pad life
• Non-directional finish decreases break-in time

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Easy and fast replacement
• Helps deliver a quieter, more efficient braking system
• Corrosion resistant coating for long-lasting durability against harsh roads
• Manufactured with quality materials to suppress high stress levels

This disc brake caliper bolt kit is designed to precisely tighten into stripped holes to easily repair the brake caliper or knuckle on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this disc brake caliper bolt kit is designed to precisely tighten into stripped holes to easily repair the brake caliper or knuckle on specified vehicles
• Ideal solution – this kit provides is a reliable replacement for original hardware that has stripped
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Carquest Premium Gold brake pads are original equipment (O.E.) replacement brake pads designed for consistent, quiet and clean braking. Our brake pads are engineered by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium Gold brake pads utilize application-specific friction formulations that provide extended pad life and cleaner wheels. These brake pads also feature OE-designed slots and chamfers for consistent performance. To prevent noise, our Carquest Premium Gold brake pads also utilize a multi-layer shim and are supplied with new brake hardware (most applications-see fitment notes). Carquest Premium Gold brake pads are the best choice when looking for brake pads that meet or exceed the OE stopping performance.

Product Features:

• Application-specific friction formulations provide shorter stopping distances and extended pad life
• Hardware included for most applications
• OE-designed slots and chamfers to reduce noise and vibration
• Multi-layer shim provides near silent braking
• Powder-coated backing plate prevents corrosion

Carquest Premium Gold brake pads are original equipment (O.E.) replacement brake pads designed for consistent, quiet and clean braking. Our brake pads are engineered by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium Gold brake pads utilize application-specific friction formulations that provide extended pad life and cleaner wheels. These brake pads also feature OE-designed slots and chamfers for consistent performance. To prevent noise, our Carquest Premium Gold brake pads also utilize a multi-layer shim and are supplied with new brake hardware (most applications-see fitment notes). Carquest Premium Gold brake pads are the best choice when looking for brake pads that meet or exceed the OE stopping performance.

Product Features:

• Application-specific friction formulations provide shorter stopping distances and extended pad life
• Hardware included for most applications
• OE-designed slots and chamfers to reduce noise and vibration
• Multi-layer shim provides near silent braking
• Powder-coated backing plate prevents corrosion

Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:

• Dependable stopping power
• Single layer shim for quiet braking
• OE-designed slots and chamfers to reduce noise and vibration
• Powder-coated backing plate prevents corrosion

Carquest Premium rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Premium rotors are designed for long-lasting and quiet braking with superior performance

Product Features:

• Meets or exceeds OE design for superior stopping power
• Exceeds ISO manufacturing guidelines (International Organization for Standardization)
• Matches OE vane size for proper cooling
• Optimal metallurgy and casting thickness to preventing warping
• Air gap eliminates brake fade and increases pad life
• Non-directional finish decreases break-in time

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

• 100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
• Electronic ignition module profile and feedback signal ensures proper OE fit, form, and function
• Thermoplastic housing withstands heat stress for enhanced durability
• Internal core made from grain oriented electrical steel limits loss factor within magnetic circuit to reduce heat and ensure coil endurance
• External core made from oriented silicon steel ensures durability and longevity

Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:

• Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
• Tensile minimum load holds up to 1800 N
• All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
• Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
• Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
• Brand may vary by location

Carquest Professional Platinum Euro brake pads are the optimal braking solution that provide an unmatched level of performance and reliability. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We use an industry-leading number of friction formulations for maximum performance and extended pad life on each application. Carquest Professional Platinum brake pads also utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. We include the wear sensors for most European applications that require replacement. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Professional Platinum brake pads are the ideal choice when looking for shorter stopping distances, quiet braking and longer-lasting brakes.

Product Features:

• Industry-leading number of application specific formulations for maximum performance and extended pad life
• On-vehicle testing similar to original equipment tests
• Patented 4-Layer HEX Shim Technology provides quiet braking
• HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
• Burnishing compound allows for a faster break-in of pads and rotors
• PTFE coated hardware and caliper pin grease included for nearly every application
• Wear sensors included on most European applications that require replacement

Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Exact fitment and original replacement
• New Brake Hardware prevents premature wear and maximizes performance
• Helps deliver a quieter, more efficient braking system
• Manufactured with quality materials to suppress high stress levels

Carquest Professional Platinum Euro brake pads are the optimal braking solution that provide an unmatched level of performance and reliability. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We use an industry-leading number of friction formulations for maximum performance and extended pad life on each application. Carquest Professional Platinum brake pads also utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. We include the wear sensors for most European applications that require replacement. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Professional Platinum brake pads are the ideal choice when looking for shorter stopping distances, quiet braking and longer-lasting brakes. Carquest Brakes also offers technical support at 1-833-BRAKE HQ (833-272-5347) for help with product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

• Industry-leading number of application specific formulations for maximum performance and extended pad life
• On-vehicle testing similar to original equipment tests
• Patented 4-Layer HEX Shim Technology provides quiet braking
• HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
• Burnishing compound allows for a faster break-in of pads and rotors
• PTFE coated hardware and caliper pin grease included for nearly every application
• Wear sensors included on most European applications that require replacement
• Powder-coated backing plate prevents corrosion

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.

Product Features:

• This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
• PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
• Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
• Multi-Layer rubberized shims provide virtually noise-free braking
• Drilled & Slotted performance rotors provide maximum cooling
• Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
• Bolt-on upgrade for stock brakes, no modifications necessary
• Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
• Rotors are zinc plated for maximum protection against rust.
• Includes 1 Front Sensor Wire
• Buy with confidence from the originator & industry leader of brake kits

Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Exact fitment and original replacement
• Helps deliver a quieter, more efficient braking system
• Low-friction PTFE coating to reduce drag
• Manufactured with quality materials to suppress high stress levels

Carquest Premium Brake Calipers are remanufactured to meet or exceed OE specifications for performance and durability. Each cast iron caliper is finished with OE-style zinc-dichromate for superior rust protection. Application-specific brackets and abutment hardware (where required) to ensure an easier installation. New EPDM rubber seals and dust boots to resist heat and prevent leaks. Every unit is 100 percentage tested for pressure and fit, ensuring out-of-the-box reliability.

Product Features:

• Meets or exceeds original equipment specifications for performance and durability
• Brackets included where required for complete system restoration
• OE-style zinc dichromate anti-corrosion coating provides superior rust resistance on all iron caliper bodies and brackets
• New, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
• New bleeder screws, banjo bolts, and crush washers included for a complete repair
• Stainless steel pad abutment hardware included when applicable

Carquest Premium Brake Calipers are remanufactured to meet or exceed OE specifications for performance and durability. Each cast iron caliper is finished with OE-style zinc-dichromate for superior rust protection. Application-specific brackets and abutment hardware (where required) to ensure an easier installation. New EPDM rubber seals and dust boots to resist heat and prevent leaks. Every unit is 100 percentage tested for pressure and fit, ensuring out-of-the-box reliability.

Product Features:

• Meets or exceeds original equipment specifications for performance and durability
• Brackets included where required for complete system restoration
• OE-style zinc dichromate anti-corrosion coating provides superior rust resistance on all iron caliper bodies and brackets
• New, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
• New bleeder screws, banjo bolts, and crush washers included for a complete repair
• Stainless steel pad abutment hardware included when applicable

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.

Product Features:

• This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
• PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
• Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
• Multi-Layer rubberized shims provide virtually noise-free braking
• Drilled & Slotted performance rotors provide maximum cooling
• Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
• Bolt-on upgrade for stock brakes, no modifications necessary
• Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
• Rotors are zinc plated for maximum protection against rust.
• Includes 1 Rear Sensor Wire
• Buy with confidence from the originator & industry leader of brake kits

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Our Z26 Street Warrior Brake Upgrade Kit with Powder Coated Calipers is recommended for high performance, high horsepower muscle and modified cars. This kit comes with everything you need for easy installation, including pads, rotors, calipers and stainless-steel hardware. The Drilled & Slotted rotors and Carbon-Fiber Ceramic pads combine to provide shorter stops under the most demanding conditions. The Powder Coated Calipers not only protect against corrosion, but also really stand out behind your wheels! This PowerStop Z26 Street Warrior Brake Upgrade Kit with Powder Coated Calipers is the affordable bolt-on upgrade that delivers more than just the braking power you need to rein in all those ponies. With our low-dust and low-noise formula, you’ll spend less time cleaning those wheels and more time enjoying what matters most – the drive.

Product Features:

• This complete brake kit has been engineered to handle the increased demand of street-driven muscle cars and performance vehicles
• Proprietary Carbon-Fiber Ceramic Z26 brake pads enhance heat dissipation versus a typical ceramic brake pad for better stopping power at high speed
• All calipers are powder coated, assembled, and tested in our Chicago, IL facility
• Stainless-steel pad shims resist the increased temperatures common on high performance applications
• Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
• Drilled & Slotted performance rotors provide maximum cooling
• Bolt-on upgrade for stock brakes, no modifications necessary
• Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
• Rotors are zinc plated for maximum protection against rust.
• Includes 1 Front Sensor Wire
• Buy with confidence from the originator & industry leader of brake kits

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Our Z26 Street Warrior Brake Upgrade Kit is recommended for high performance, high horsepower muscle and modified cars. This kit comes with everything you need for easy installation, including pads, rotors and stainless-steel hardware. The Drilled & Slotted rotors and Carbon-Fiber Ceramic pads combine to provide shorter stops under the most demanding conditions. This PowerStop Z26 Street Warrior Brake Upgrade Kit is the affordable bolt-on upgrade that delivers more than just the braking power you need to rein in all those ponies. With our low-dust and low-noise formula, you’ll spend less time cleaning those wheels and more time enjoying what matters most – the drive.

Product Features:

• This complete brake kit has been engineered to handle the increased demand of street-driven muscle cars and performance vehicles
• Proprietary Carbon-Fiber Ceramic Z26 brake pads enhance heat dissipation versus a typical ceramic brake pad for better stopping power at high speed
• Stainless-steel pad shims resist the increased temperatures common on high performance applications
• Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
• Drilled & Slotted performance rotors provide maximum cooling
• Bolt-on upgrade for stock brakes, no modifications necessary
• Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
• Brake rotor, pad & hardware engineered to work together to increase stopping power & enhance heat dissipation for your performance car
• Rotors are zinc plated for maximum protection against rust.
• Includes 1 Front & 1 Rear Sensor Wire
• Buy with confidence from the originator & industry leader of brake kits

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit with Powder Coated Calipers comes with everything you need, from pads, rotors, calipers and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. The Powder Coated Calipers not only protect against corrosion, but also really stand out behind your wheels! Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit with Calipers.

Product Features:

• This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
• PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
• All calipers are powder coated, assembled, and tested in our Chicago, IL facility
• Low dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
• Multi-Layer rubberized shims provide virtually noise-free braking
• Drilled & Slotted performance rotors provide maximum cooling
• Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
• Bolt-on upgrade for stock brakes, no modifications necessary
• Rotors are zinc plated for maximum protection against rust.
• Includes 1 Front Sensor Wire
• Buy with confidence from the originator & industry leader of brake kits

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.

Product Features:

• This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
• PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
• Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
• Multi-Layer rubberized shims provide virtually noise-free braking
• Drilled & Slotted performance rotors provide maximum cooling
• Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
• Bolt-on upgrade for stock brakes, no modifications necessary
• Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
• Rotors are zinc plated for maximum protection against rust.
• Includes 1 Front & 1 Rear Sensor Wire
• Buy with confidence from the originator & industry leader of brake kits

NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency

Product Features:

• SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
• PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
• TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
• SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
• COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
• RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs

The Autolite Platinum spark plug is a high-performance solution designed to enhance your engine’s efficiency and longevity. Featuring a platinum center electrode firing tip, it ensures quicker firing, smoother starts, and improved fuel efficiency while resisting gap erosion for an extended service life. Its high alumina ceramic insulator provides excellent thermal conductivity and superior insulation, boosting overall strength and reliability. The multi-rib insulator design prevents flash-over, while the nickel-plated shell offers exceptional corrosion resistance, ensuring durability even in demanding conditions. With a mid-projection standard center electrode and a flat seat type, this spark plug is tailored for optimal performance in older engine designs. The combination of a platinum tip and nickel ground electrode makes it a dependable choice for those seeking enhanced acceleration and long-lasting performance. Whether you’re maintaining or upgrading, this performance-grade spark plug delivers exceptional value and reliability.

Product Features:

• Engineered with a platinum firing tip that prevents gap erosion for longer service life.
• Its high alumina ceramic insulator provides thermal conductivity and superior insulation for increased strength.
• The multi-rib insulator prevents flash-over.
• Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended life.
• Incorporates a mid-projection center electrode and flat seat type, optimizing compatibility and performance in older engine designs.

NGK V-Power spark plugs offer reliable performance and improved ignitability over standard nickel plugs. Engineered specifically for OE applications, the special V-cut nickel alloy center electrode and concave ground electrode of NGK’s V-Power spark plug

Product Features:

• ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode with V-groove provides consistent performance
• RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
• NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
• SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
• COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
• TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal

Double Platinum Spark Plug offers enhanced durability and performance with its platinum-to-platinum design, effectively reducing gap erosion and minimizing misfires for a longer service life. Engineered for distributor-less ignition system (DIS) engines, it outperforms copper and standard platinum plugs. The yttrium-enhanced ground electrode ensures superior heat transfer, maintaining durability under high temperatures and pressure. Its high alumina ceramic insulator optimizes thermal conductivity and dielectric strength, while the multi-rib insulator prevents flash-over for reliable operation. Featuring a mid-projection center electrode and flat seat type, this performance-grade spark plug is built with platinum-tipped electrodes for consistent ignition and lasting reliability. Designed to deliver exceptional value, it is a dependable choice for those seeking improved engine efficiency and longevity.

Product Features:

• Engineered with a platinum-to-platinum design that prevents gap erosion, extending the life of the spark plug.
• The yttrium-Enhanced Ground Electrode delivers superior heat transfer that delivers more durability under high temps and pressure for greater life.
• Its high alumina ceramic insulator provides optimum thermal conductivity and dielectric strength.
• The multi-rib insulator prevents flash-over.
• Designed with a mid-projection center electrode and flat seat type to ensure consistent ignition and reliable performance in demanding conditions.

NGK Iridium IX spark plugs are specifically designed for the performance enthusiast. Iridium IX provides outstanding acceleration, high fuel efficiency and durability. NGK Iridium IX plugs offer extreme ignitability and exceptional anti-fouling. Tapered cut ground electrode provides improved starting, idling and throttle response. The Iridium fine wire center electrode’s durability is six times harder than platinum. Iridium alloy’s extremely high melting point is perfect for today’s engines. For even greater performance consider upgrading to an NGK Ruthenium HX plug.

Product Features:

• SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
• IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
• TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
• SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
• TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
• RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs

The Iridium Power Spark Plug features the world’s smallest Iridium Center Electrode at just 0.4mm, delivering unmatched spark precision for maximum combustion efficiency. Engineered with a patented 360-degree laser welding assembly process, this spark plug ensures exceptional durability and reliability under extreme conditions, withstanding temperatures exceeding 4000 Deg F. Its U-groove and taper-cut ground electrode design optimizes flame propagation, enhancing overall engine performance. The burnished nickel plating provides superior resistance to high temperatures and corrosion, ensuring long-lasting performance. Designed with a flat seat type and crafted from premium iridium material, this spark plug is built to deliver consistent energy and durability. With a wide range of part numbers available, it is compatible with thousands of applications, including classic and collector cars. Choose this spark plug for a perfect blend of cutting-edge technology, durability, and performance.

Product Features:

• World’s smallest Iridium Center Electrode (0.4mm) for improved spark for maximum combustion
• Patented 360-degree laser welding assembly process
• U-groove and taper cut ground electrode to maximize flame propagation.
• Withstands temperatures greater than 4000 degree Fahrenheit
• Burnished nickel plating for high temperature endurance and superior corrosion resistance
• Wide range of part numbers for thousands of applications, including classic and collector cars
• Iridium Power

The Double Platinum Power Spark Plug (RC10PLPB4) is engineered for enhanced ignitability and long-lasting durability, making it a premium choice for reliable engine performance. Featuring a fine-wire platinum center electrode and a platinum pad ground electrode, this spark plug ensures greater wear resistance and a sharper, more focused spark. The innovative Heat-Active alloy allows the electrodes to maintain an optimal operating temperature under all engine loads, ensuring consistent performance and efficiency. Its V-trimmed ground electrode design further enhances spark focus, while the resistor type construction minimizes electrical interference. Designed as a standard replacement with a flat seat type, this spark plug is built to deliver powerful performance and maintain stable operation, making it an excellent choice for drivers seeking durability and precision in their ignition system.

Product Features:

• Double Platinum Power – Premium Spark Plug. More Powerful Performance.
• Platinum center and ground electrode for greater wear resistance
• Maintains stable operating temperature under all engine loads
• Fine-wire center electrode for greater ignitability
• V-trimmed ground electrode promotes sharper spark focus
• Heat-Active alloy allows electrodes to reach optimal temperature

NGK Standard spark plugs (in the iconic NGK ‘yellow box’ packaging) are a proven OE cornerstone and technology customers have relied on for decades. Engineered specifically for OE applications, NGK Standard spark plugs provide OE quality nickel alloy reliable performance and design. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance, while triple gasket sealing prevents combustion gas leakage. Solid 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.

Product Features:

• ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode provides consistent performance
• RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
• NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
• SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
• COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
• TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal

Double Platinum Spark Plug by Motorcraft is engineered to deliver exceptional durability and reliability, making it the ideal choice for Ford, Lincoln, and Mercury vehicles. Designed with platinum center and ground electrode tips, these spark plugs resist oxidation and arc erosion, ensuring long-lasting performance. The multi-rib insulator minimizes misfires, while the gasket seat type guarantees a precise fit. With service intervals of up to 100,000 miles, these spark plugs optimize emissions, reduce fuel consumption, and eliminate misfires, providing a smoother driving experience. Backed by Motorcraft’s Service Parts Warranty, they are crafted from high-quality materials to meet strict Ford engineering standards, offering original equipment performance for a wide range of domestic and import cars and trucks. Motorcraft ignition components also help prevent false check engine lights, giving you confidence in your vehicle’s reliability. These spark plugs are what your vehicle was equipped with at the factory, ensuring compatibility and peace of mind.

Product Features:

• Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
• Backed by Motorcraft’s Service Parts Warranty
• Exact fit for Ford, Lincoln and Mercury vehicles
• Resistant to oxidation and arc erosion.
• Multi-rib insulator protects against misfire.
• Service intervals of up to 100,000 miles.
• Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
• Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
• Motorcraft ignition components help prevent false check engine lights.

The Spark Plug, designed for Ford, Lincoln, and Mercury vehicles, is the trusted choice recommended by Ford Motor Company. Engineered for exceptional durability, it features a high-strength steel high thread construction and advanced materials like platinum-iridium and fine-wire double platinum, ensuring reliable performance over extended service intervals of up to 100,000 miles. For standard applications, options include nickel and standard copper core, offering up to 60,000 miles of dependable use. Its gasket seat type ensures a secure fit, optimizing combustion efficiency and engine performance. This spark plug delivers long-lasting value and compatibility, making it an essential component for maintaining your vehicle’s peak performance.

Product Features:

• Optimized Combustion Efficiency: The gasket seat type ensures a secure fit, enhancing combustion efficiency for improved engine performance.
• Trusted Compatibility: Specifically designed for Ford, Lincoln, and Mercury vehicles, ensuring seamless integration and reliable operation.
• Long Service Intervals: 100,000 mile service interval, High-Strength Steel High Thread, Platinum-Iridium, Fine-Wire Double Platinum, 60,000-100,000 mile service interval, Up to 60,000 mile service interval: Nickel, Standard Copper Core.

Experience the perfect blend of durability and high performance with this spark plug, designed to deliver exceptional power and torque. Featuring a 0.4mm Iridium Center Electrode – the world’s smallest diameter – it maximizes firing potential, while the 0.7mm Needle Tip Ground Electrode enhances spark energy and minimizes heat quenching. Built with DENSO’s patented Iridium-Rhodium alloy formula, it boasts the highest concentration of Iridium for unmatched durability, enduring temperatures over 4000 Deg F. The advanced 360-degree laser welding process ensures a robust bond and structural integrity, while the Twin-Tip Technology combines a fine wire Iridium Center Electrode with a Needle Tip Platinum Ground Electrode for superior ignition. With over 100,000 miles of reliable performance, this plug enhances fuel economy, reduces emissions, and is crafted from premium materials for long-lasting endurance. Its flat seat type design further optimizes performance, making it a top-tier choice for drivers seeking ultimate efficiency and power.

Product Features:

• 0.4mm Iridium Center Electrode: World’s Smallest Diameter that maximizes firing potential
• 0.7mm Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
• DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest concentration of Iridium vs. competitors for greater durability
• DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
• Durability of an OE style plug combined with Power and Torque of high performance.
• Withstands temperatures greater than 4000 degree Fahrenheit
• Iridium TT
• Ultimate Endurance and Power: The DENSO Iridium TT Spark Plug features a 0.7mm Iridium Tip, ensuring over 100,000 miles of uncompromised performance.
• Advanced Twin-Tip Technology: Developed from Original Equipment Specification Super Ignition Plug (SIP) design, combining a Fine Wire Iridium Center Electrode with a Needle Tip Platinum Ground Electrode.
• Enhanced Fuel Economy and Lower Emissions: Drive around the Earth over 4 times with improved fuel efficiency and reduced emissions.
• Premium Materials: Features an Iridium Center Electrode Tip and a Flat Seat Type for optimal performance and durability.

The Premium DiamondFire Automotive Spark Plug is engineered to deliver peak performance and efficiency for your vehicle. Featuring E3’s patented Diamond Fire edge-to-edge ground electrode, it ensures a faster, more complete burn for smoother acceleration and idle. The innovative “diamond-shaped” side wire electrode enhances combustion by igniting the air/fuel mixture more quickly, resulting in a larger flame kernel and improved power output – up to 6% on average. Designed with nickel center and ground electrode tips, this spark plug offers durability and consistent performance. Its cleaner-burning combustion reduces engine carbon deposits and promotes fuel savings, making it an eco-friendly choice. Pre-gapped at the factory for hassle-free installation, this spark plug is a perfect blend of advanced technology and convenience, ensuring your engine runs at its best.

Product Features:

• E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn
• Smoother Acceleration & Idle – The faster flame initiated by the spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
• Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
• Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
• E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
• The Spark Plugs are pre-gapped at the factory and cannot be adjusted.

Autolite Copper spark plugs are crafted to ensure reliable performance and durability for your vehicle or application. Featuring a copper core center electrode, these spark plugs excel in thermal control and resist fouling, ensuring consistent operation. The high nickel alloy center and ground electrodes are designed for extended life, while the mid-projection center electrode enhances ignition efficiency. Built with a high alumina multi-rib ceramic insulator, these plugs offer superior thermal conductivity and insulation, boosting strength and reliability. The nickel-plated shell provides exceptional corrosion resistance, making them ideal for long-term use. With a flat seat type and integrated resistor, these spark plugs deliver quick starts and meet performance expectations, offering great value for regular-grade applications.

Product Features:

• The copper core center electrode aids in thermal control and improves resistance to fouling.
• Its specially engineered high nickel alloy center and ground electrode provides extended life.
• The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
• Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
• The integrated resistor ensures quick starts and optimized performance, making it a reliable choice for regular-grade applications.

The Platinum TT Spark Plug with its advanced twin-tip design ensures faster flame propagation for more complete combustion, enhancing ignition performance and efficiency. Featuring a platinum center electrode, it delivers excellent conductivity and durability, while the titanium-enhanced ground strap ensures superior performance and extended lifespan. The flat seat type provides a secure fit, making it compatible with a variety of vehicles. Designed for reliability and longevity, this spark plug is a dependable choice for maintaining consistent engine performance. Its high-quality materials and innovative design make it a valuable addition to your vehicle’s ignition system.

Product Features:

• Platinum Twin-Tip Design: Features a platinum twin-tip design for enhanced ignition performance and efficiency.
• Titanium-Enhanced Ground Strap: Equipped with a titanium-enhanced ground strap, ensuring superior performance and longevity.
• High-Quality Platinum Center Electrode: The center electrode tip is made from high-quality platinum, providing excellent conductivity and durability.
• Superior Performance and Longevity: Designed to deliver superior performance and extended lifespan, making it a reliable choice for your vehicle’s ignition needs.
• Flat Seat Compatibility: The flat seat type ensures a secure and precise fit, making it suitable for a wide range of vehicle applications.

The U-Groove Spark Plug is engineered with an OEM-specified special ground electrode configuration, ensuring optimal performance and reliability for a wide range of applications, including classic and collector cars. Its precision machine-rolled threads minimize the risk of seizing or cross-threading in delicate aluminum heads, making installation smooth and hassle-free. Built to last, this spark plug outperforms conventional plugs by offering twice the lifespan, delivering over 30,000 miles of dependable operation. Crafted with a nickel center electrode tip and featuring a flat seat type, it guarantees consistent ignition and efficient combustion. Each plug is 100 percent pre-fired to ensure reliable functionality right out of the box. With its U-Groove design, this spark plug provides enhanced durability and compatibility, making it a valuable upgrade for maintaining peak engine performance.

Product Features:

• OEM specified special ground electrode configuration
• Precision machine-rolled threads reduce seizing and cross-threading in delicate aluminum heads
• Wide range of part numbers for thousands of applications, including classic and collector cars
• Lasts twice as long as most conventional plugs
• 100 percent pre-fired to assure reliable operation
• U-Groove Conventional

This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
• Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
• Durable construction – made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, the Autolite Iridium XP spark plugs feature an iridium-enhanced 0.6mm finewire design and patented platinum sidewire technology to provide better overall durability and a more focused ignition for enhanced ignitability and performance. Features double Iridium-enhanced alloy technology center electrode for improved durability and wear resistance.

Product Features:

• 0.6 mm finewire design improves ignitability
• Patented V-trimmed platinum sidewire technology resists wear
• OE equivalent design is engineered for every engine
• Designed for better overall durability with virtually no gap erosion
• Double Iridium-enhanced alloy center electrode ensures superior wear resistance for extended performance life.

ACDelco Professional Conventional Spark Plugs are designed for reliability and efficient performance, and are a high quality replacement for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function.

Product Features:

• Black Onyx coating helps reduce corrosion
• Copper core provides great heat transfer and helps maximize plug durability
• Ribbed suppressor seal extends resistance and helps prevent spark ‘flash over’ and misfires
• Nickel-chrome alloy sheathing helps prevent corrosion on center electrode
• Available for use in Marine applications
• Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
• ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Built by IATF 16949 certified manufacturers for consistent durability
• Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
• Segmented secondary bobbins to distribute high voltage and prevent shorting
• 100% end-of-line tested to ensure proper performance
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Ignition Switch allows for reliable control of the vehicle’s electrical systems and engine start-up, enhancing convenience and ensuring consistent performance during operation. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

• Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
• Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
• Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
• Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

Benefits of Bosch original equipment quality ignitions coils include the right ignition voltage, long lasting spark, better engine running conditions, lower fuel consumption, and reduced exhaust emissions.

Product Features:

• Meets or exceeds OEM specification
• Ensures reliable voltage for smooth engine performance

Every single Delphi ignition coil is designed and endurance tested using high quality materials. This ensures fast starts, consistent engine performance and optimized fuel efficiency. We makes more than 10 million ignition coils for North America each year, and each one is engineered to OE design specifications for vehicles from Ford, Toyota, Nissan, Lexus, GM, Mazda, Chrysler, Subaru, Acura and more.

Product Features:

• Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
• Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
• Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
• We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues

Motorcraft Spark Plugs are original equipment on Ford Motor Company vehicles, engineered to meet strict Ford engineering standards for performance and reliability. These spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption, and optimize emissions. They are resistant to oxidation and arc erosion, feature a multi-rib insulator to protect against misfire, and offer service intervals of up to 100,000 miles. Backed by Motorcraft’s Service Parts Warranty, these spark plugs are an exact fit for Ford, Lincoln, and Mercury vehicles and are designed with high-quality materials to provide reliable performance for almost any application. Motorcraft ignition components also help prevent false check engine lights, ensuring your vehicle runs smoothly.

Product Features:

• Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
• Backed by Motorcraft’s Service Parts Warranty
• Exact fit for Ford, Lincoln and Mercury vehicles
• Resistant to oxidation and arc erosion.
• Multi-rib insulator protects against misfire.
• Service intervals of up to 100,000 miles.
• Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
• Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
• Motorcraft ignition components help prevent false check engine lights.
• Engineered for Ford Vehicles: Original equipment on Ford, Lincoln, and Mercury vehicles, ensuring a perfect fit and optimal performance.

Champion Platinum Power spark plugs are engineered to deliver exceptional performance and durability, making them a reliable choice for maintaining your vehicle’s efficiency. Featuring a platinum center electrode, these spark plugs ensure long-lasting operation while resisting wear and maintaining the proper gap specification throughout their lifespan. The fine-wire center electrode enhances ignitability, while the V-trimmed ground electrode sharpens spark focus for optimal combustion. Constructed with the exclusive Heat-Active alloy, these plugs quickly reach and maintain the ideal operating temperature, ensuring consistent performance under various driving conditions. Designed as a standard replacement, they feature a flat seat type and a nickel-tipped ground electrode for added durability. With a built-in resistor, these spark plugs help reduce electromagnetic interference, making them a dependable choice for smooth engine operation. Upgrade to Champion Platinum Power spark plugs for a perfect balance of power, efficiency, and longevity.

Product Features:

• Platinum Power- Premium Spark Plug. Powerful Performance.
• Platinum center electrode for long life
• Fine-wire center electrode for greater ignitability
• V-trimmed ground electrode promotes sharper spark focus
• Heat-Active alloy allows electrodes to reach optimal temperature
• Platinum tipped center wire resists wear and helps to maintain proper gap spec over life of the plug

To achieve optimum performance, combustion engines require clean intake air. If pollutants in the air, such as soot or dust, get into the combustion chamber, pitting may occur on the cylinder heads, causing premature wear of the engine. The function of electronic parts located between the suction and the combustion chamber may also be significantly impaired. MANN-FILTER air filters are the end of the road for all dirt particles. No matter whether it’s dust, pollen, sand, soot or even water droplets – thanks to the highest degree of dirt separation and high mechanical stability, MANN-FILTER air filters filter even the smallest particles out of the intake air. This enables an optimum composition of the fuel-air ratio and ensures that the engine performance is consistent. In order to guarantee performance, air filters must be checked regularly, as a blocked filter will impede the air supply to the engine. The possible consequence of this is: the fuel may not be completely burned and may in part be discarded without being used.

Product Features:

• Highest degree of dirt separation and high mechanical stability
• Perfectly adapted in form and function to the widest possible range of installation situations
• Filter even the smallest particles out of the intake air
• Enables an optimum composition of the fuel-air ratio and ensures that the engine performance is consistent
• High dust holding capacity ensures reliability throughout the entire service interval

Carquest Premium oil filters are built for durability, utilizing enhanced components to protect engines for the extended drain intervals of modern vehicles using conventional or synthetic lubricants. Our oil filters are built with synthetic blend media that provides 2X the capacity and up to 10,000 miles of protection. Carquest Premium filters feature silicone sealing gaskets for better performance in extreme temperatures. Carquest Premium oil filters meet or exceed original equipment (O.E.) specifications and meet the requirements for maintaining a new vehicle warranty.

Product Features:

• Engineered for protection for up to 10,000 miles when used with the appropriate motor oil
• Synthetic blend media provides 99.5% efficiency at 20 microns and 2X capacity vs. Standard filters
• Silicone sealing gasket performs better in extreme temperature conditions and longer drain intervals (silicone gasket is new feature introduced as a running change)

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:

• Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
• Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
• Durable construction – designed and manufactured to strict specifications for reliable performance
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Carquest Premium engine air filters are designed to meet OE fit, form and function for optimal filtration and engine protection. High-quality paper, enhanced bonding, and reinforced metal screen backing give Carquest Premium air filters the added strength and durability that modern engines demand. Built to meet or exceed original equipment standards, Carquest Premium air filters provide exceptional engine protection and optimal performance in all driving conditions.

Product Features:

• Precision engineered to match OE fit, form and function
• Media provides 99% filtration efficiency and larger capacity
• Sealing materials are designed for each application to ensure a positive seal
• Reinforced metal screen backing with anti-rust coating on applicable applications
• Built to withstand high CFM conditions of forced induction engines

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:

• Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
• Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
• Durable construction – designed and manufactured to strict specifications for reliable performance
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

CARQUEST offers high quality, high efficiency fuel filters for automotive, medium and heavy trucks as well as farm, construction, mining and other equipment applications.

Product Features:

• Keeps dirt, debris and contaminants from clogging fuel lines and causing erratic, unstable fuel performance
• Manufactured to a strict quality standards with 98% efficiency at a 10 micron rating.
• Provides maximum fuel system protection.
• Designed to meet or exceed Original Equipment specifications
• Protects the injectors from debris that cause damage and clogging.
• Provides less restriction preventing the fuel pump from working too hard.
• Superior materials, design and construction ensure CARQUEST fuel filters provide excellent performance under all types of operating conditions.

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:

• Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
• Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
• Durable construction – designed and manufactured to strict specifications for reliable performance
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered and manufactured specifically for the repair environment
• Unsurpassed quality you can trust
• Includes all parts needed to complete the repair

Carquest Premium cabin air filters are manufactured to the highest quality standards and field tested to ensure easy installation. Our cabin air filters are engineered to stop airborne contaminants from getting into the cabin while also protecting the delicate components of modern vehicle climate control systems. Carquest Premium cabin air filters utilize electrostatic particulate, non-woven media for longer filter life. Each Carquest Premium cabin air filter also includes application-specific installation instructions in the box to save you installation time.

Product Features:

• Electrostatic particulate, non-woven filter media allows longer filter life
• Select applications available with activated carbon infused media to neutralize odors
• Effectively traps airborne contaminants for cleaner air in the cabin
• 95% efficiency at 3 microns per ISO 11155-1 test standard
• Flow arrow on side of filter indicates installation position
• All filters include application specific installation instructions

Carquest Standard engine air filters are designed to remove airborne contaminants and optimize engine performance in all driving conditions. Each air filter features cured filter media that increases tensile strength, allowing the filter to maintain high-pressure requirements without collapse. Carquest Standard air filters use a polyurethane construction that provides higher tear strength and more structural support. Our Carquest Standard air filters meet original equipment (O.E.) standards and fulfill the requirements for maintaining a new vehicle warranty.

Product Features:

• Precision engineered for OE fit, form and function
• Durable polyurethane construction maintains structural support
• Cured filter media increases tensile strength, allowing filter to maintain high-pressure requirements without collapse

CARQUEST Standard Oil Filters give you the level of quality and application you have come to expect from the CARQUEST name.

Product Features:

• 94.1% efficiency rating at 20 microns
• Meets new car warranty requirements
• Precision coil spring relief valve
• Nitrile anti-drainback valve for engine start-up protection
• Metal end caps
• Cellulose/synthetic blended media
• Internally lubricated gasket

Constructed with 100-percent polyurethane boxed frame, this non-oiled OE replacement filter provides years of hassle free service. Three Layers of Progressive Synthetic (Dry) Media for Maximum Convenience. Washable and reusable for multiple cleaning cycles, the tall open evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Integrated urethane bump seal insures tight, no leak seal over the life of the filter.

Product Features:

• Outflows Stock Paper Filters For Improved Horsepower and Torque
• 100% Polyurethane Frame On All Sides For Extra Long Filter Life
• Washable And Reusable For Multiple Cleaning Cycles
• Progressive Bump Seal Design For A Perfect Fit

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:

• Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
• Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
• Durable construction – designed and manufactured to strict specifications for reliable performance
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

AGS ACCUFIT Oil Drain Plug is a high-coverage/low-part number program that covers up to 93% of all vehicles on the road, including domestic, European, Japanese, British, and Korean models, while reducing inventory and associated costs by 80%. Reducing stocked part numbers to just 13 and the superior quality built-in features make ACCUFIT your number one choice for oil drain plugs. Easy Install – Finger-grip wing for ease of installation. All plugs have 14mm hex – just one wrench works for all! Hi-Temp Gasket – Red hi-temp gasket for max sealing protection. Easy ID – Thread size etched on each plug. Rust Protection – Black oxide coating for rust and corrosion protection. Avoid Cross-Threading – Pilot-point tip to avoid cross-threading during installation.

Product Features:

• Easy Install – Finger-grip wing for ease of installation
• All plugs have 14mm hex – just one wrench works for all
• Hi-Temp Gasket – Red hi-temp gasket for max sealing protection