1995 Acura Integra Performance and Racing Products
More 1995 Acura Integra Performance and Racing Products Categories
If you’re looking for an original Performance and Racing Products replacement for a 1995 Acura Integra, you can search through our selection below. You’ll also find aftermarket and OEM Performance and Racing Products to meet your needs.
Essential 1995 Acura Integra Performance and Racing Products
Energy Suspension – Tie Rod Dust Boot (Part No.9.13103G)
from
$6.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Edelbrock – Intake Gasket for 1994-01 Acura Integra LS B18B (Part No.15043)
from
$20.99
Product Features:
See More
- Clean Positive Seal
- Embossed Silicone Bead Surrounding The Port
- Matched To Manifolds And Cylinder Heads
MSD Ignition – Rotor, Honda/Aura for 8292, 82921, 82922, 8293, 8296 Cap (Part No.8092)
from
$54.79
All new Rynite injected rotors for MSD’s Honda/Acura caps! These rotors feature an all new injection molded design with brass terminal for improved transfer of the high voltage.
Product Features:
See More
Product Features:
- Resist carbon tracking
- High quality material
- Max voltage transfer
- Molded from insulated material
- Fits MSD cap PN 8292/82921/82922/8293/8298
Energy Suspension – Sway Bar Bushing Set (Part No.16.5112R)
from
$12.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Sway Bar Bushing Set (Part No.16.5112G)
from
$12.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
NOS/Nitrous Oxide Systems – Import Nitrous System Dry Design (Part No.05122NOS)
from
$1130.00
Import Nitrous System Dry Design
K&N – Cold Air Intake: Adds Up To 6 Horsepower, With Million Mile Air Filter (Part No.57-3509)
from
$349.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
Energy Suspension – Ball Joint Dust Boot Set (Part No.16.13101R)
from
$10.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Lasts Longer
- Looks Great
Energy Suspension – Control Arm Bushing Set (Part No.16.3105R)
from
$73.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Motor Mount Insert (Part No.16.1109R)
from
$35.99
Available for many popular sporty and performance front wheel drive vehicles. A real must to use for sport compact competition and performance uses. Helps reduce wheel hop and traction loss. Prevents damage to other vehicle components. Improves and even restores broken motor mounts. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluid oils, coolants and road contaminants.
Product Features:
See More
Product Features:
- Prevents Tearing of Original Soft Mount Material
- A Must-Use for High Performance Conditions
- Eliminates Excess Engine Movement
Energy Suspension – Motor Mount Insert (Part No.16.1106R)
from
$65.99
Available for many popular sporty and performance front wheel drive vehicles. A real must to use for sport compact competition and performance uses. Helps reduce wheel hop and traction loss. Prevents damage to other vehicle components. Improves and even restores broken motor mounts. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluid oils, coolants and road contaminants.
Product Features:
See More
Product Features:
- Prevents Tearing of Original Soft Mount Material
- A Must-Use for High Performance Conditions
- Eliminates Excess Engine Movement
Energy Suspension – Trailing Arm Bushing Set (Part No.16.7106G)
from
$40.99
Product Features:
See More
- Help Maintain Proper Rear Toe and Caster
- During High Performance Driving Conditions
- Important When Using Larger Wheels/Tires
MSD Ignition – Distributor Cap and Rotor; Modified; Civic/Integra LS; 92-00 (Part No.82923)
from
$82.99
MSD’s Honda and Acura modified distributor kits are specially constructed to allow the use of a powerful external coil (blaster) series. Each cap is specially fitted with an MSD power tower to accept the high voltage of an MSD blaster coils.
Product Features:
See More
Product Features:
- Covert Honda Dist. To A Powerful External MSD Coil
- Cap Has A Coil Tower
- Includes A New Rotor
- Designed w/Performance In Mind
- Supplied w/8.5mm Coil Wire
- Low Resistance Terminals
Energy Suspension – Control Arm Bushing Set (Part No.16.3108G)
from
$69.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Control Arm Bushing Set (Part No.16.3105G)
from
$71.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Manual Transmission Shifter Stabilizer Bushing Set (Part No.16.1101R)
Energy Suspension – Hyper-Flex System (Part No.16.18105R)
from
$237.99
Product Features:
See More
- Incredible Improvement in Control
- Maintains Proper Caster and Camber Alignment
- Increase in Handling and Control
- Greatly Reduce Wheel Hop on Quick Acceleration
- Even Braking Control is Improved
- Better Suspension Stability
Energy Suspension – Hyper-Flex System (Part No.16.18104R)
from
$265.99
Product Features:
See More
- Incredible Improvement in Control
- Maintains Proper Caster and Camber Alignment
- Increase in Handling and Control
- Greatly Reduce Wheel Hop on Quick Acceleration
- Even Braking Control is Improved
- Better Suspension Stability
Energy Suspension – Hyper-Flex System (Part No.16.18105G)
from
$234.99
Product Features:
See More
- Incredible Improvement in Control
- Maintains Proper Caster and Camber Alignment
- Increase in Handling and Control
- Greatly Reduce Wheel Hop on Quick Acceleration
- Even Braking Control is Improved
- Better Suspension Stability
Mr. Gasket – Exhaust Gasket, Copper Seal – Fits Acura Integra 1.7L, 1.8L – 1992-2001 (Part No.7230)
from
$42.99
Mr. Gasket Copper Seal Header Gaskets are a high quality copper gasket that performs extremely well and are reusable. We recommend this in all racing and high performance applications. They are for stock heads unless indicated, and work well in high heat and turbocharged applications.
Product Features:
See More
Product Features:
- Manufactured from ¿Dead Soft¿ (solid) .043″ thick copper material
- Manufactured from ┐Dead Soft┐ (solid) .043″ thick copper material
- .051″ embossment around each exhaust port to seal irregular surfaces. Total gasket thickness .094¿
- .051″ embossment around each exhaust port to seal irregular surfaces. Total gasket thickness .094┐
- Provides excellent sealing and durability
- Conforms to and seals minor surface irregularities
- For high performance street, drag race, oval track and turbocharged (extreme heat) applications
- Ideal For Tow Vehicles
- Ideal For Motorhomes
Popular 1995 Acura Integra Performance and Racing Products Categories
1995 Acura Integra Performance and Racing Products
You count on your 1995 Acura Integra to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 23 Performance and Racing Products ranging in price from $5.99 to $1,130.00, you’re sure to find everything you need for your 1995 Acura Integra.
Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 6 different brands like Energy Suspension, MSD Ignition, and Mr. Gasket. 1995 Acura Integra Performance and Racing Products start as low as $5.99!
One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 4 extensive product reviews on 1995 Acura Integra Performance and Racing Products.
Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1995 Acura Integra below to get started!
Top-Rated Performance and Racing Products Brands For Your 1995 Acura Integra
Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1995 Acura Integra running right for years to come. In our inventory you’ll find brands like Energy Suspension, MSD Ignition, Mr. Gasket, and even more.
Popular MSD Ignition Performance and Racing Products
You’ll find popular MSD Ignition brand products across Performance Distributors. All are waiting to get your 1995 Acura Integra back on the road. Some of the top-rated MSD Ignition products in these categories are:
from
$82.99
(2)
Distributor Cap and Rotor; Modified; Civic/Integra LS; 92-00
Performance Distributor Cap and Rotor Kits
FAQs for 1995 Acura Integra Performance and Racing Products
What are the most purchased Performance and Racing Products for the 1995 Acura Integra?
Out of 23 Performance and Racing Products for the 1995 Acura Integra, the most popular in our inventory are:
from
$15.99
This product is not rated
Manual Transmission Shifter Stabilizer Bushing Set
Performance Shifter Components and Kits
