1994 Toyota 4Runner Drivetrains
More 1994 Toyota 4Runner Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1994 Toyota 4Runner, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1994 Toyota 4Runner Drivetrains
Spicer – Greasable U-Joint (Part No.K1010991371SPI)
from
$62.02
Spicer Drivetrain Products light-duty U-joints feature journal crosses that are manufactured from high-quality alloy forgings and heat-treated for maximum life. The bearing cups are case-hardened for strength and durability, while the seals are crafted from nitrile rubber for optimum grease retention and contaminant exclusion. Ample grease reservoirs in each trunnion assure effective lubrication; they’re pre-filled with high-quality synthetic lithium grease, providing superior friction-reduction and resistance to higher temperatures. These replacement universal joints are available for dozens of positions, as well as greasable and non-greasable styles. Order the model designed for fitment with your vehicle and engine type.
Product Features:
See More
Product Features:
- Forged cross
- Lubeable
- O.E.M replacement
- Snap rings
Yukon Gear – Master Overhaul Kit For ’86 And Newer Toyota 8" Differential With OEM Ring & Pinion (Part No.14118)
from
$279.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses premium bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.
Product Features:
See More
Product Features:
- Fits Toyota 8″ and 4 cylinder engine, 1986 and up with OEM ring and pinion set
- Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , oil baffles and slingers , thread locker, marking compound with brush, and gasket.
Yukon Gear – The Carrier Bearing Puller (Part No.56034)
from
$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
- Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-984)
from
$50.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
- Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – V6 Side Gear Thrust Washer (Part No.33391)
from
$23.99
V6 side gear Thrust washer.
Product Features:
See More
Product Features:
- Side gear thrust washer
- Fits Toyota V6
Yukon Gear – Toyota Bearing Retainer For ’01-’02 4Runner, ’01-’04 Tacoma & 00-’06 Tundra (Part No.33421)
from
$22.99
Product Features:
See More
- Bearing retainer
- Fits 2001-2002 Toyota 4Runner, 2001-2004 Tacoma and 2000-2006 Tundra
Milemarker – Hub Conversion Kit (Part No.95-29918)
Dorman – C.V. Joint Solvent Welded Split Boot Kit Outer (Part No.614-632)
from
$21.99
Our CV Joint Boots provide various methods of eliminating the removal of the CV joint during installation. Uni-Fit boots can be stretched over the CV Joint and Quick Boots come in halves.
Product Features:
See More
Product Features:
- Save labor with easy installation methods
- Comes with grease and clamps
- Rugged silicone or neoprene materials offer a high resistance to cracking, rotting and leaking
- The Speedi and Quick Boot are installed without special tools
Dorman – Differential 4WD Actuator Fork (Part No.600-995)
from
$78.99
This 4WD actuator fork directly replaces the original equipment part on specific vehicle applications. It is reverse engineered to reliably restore proper functionality to the four-wheel drive system.
Product Features:
See More
Product Features:
- Ideal replacement – this 4WD actuator fork directly replaces the original equipment part on specific vehicle years, makes and models
- Effective fix – installation addresses inoperative four-wheel-drive actuation caused by failed original equipment fork
- Cost-effective solution – offers original equipment fit and function at a competitive price
- Trustworthy quality – backed by a team of designers and engineers in the United States
National – Bearings (Part No.201-CC)
from
$15.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Bearing (Part No.HB-24)
from
$227.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.30306)
from
$51.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Matched cup and cone components ensures consistent quality and outstanding performance
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – 8" IFS Clamshell Carrier, 3.91 And Up, 07 & Up FJ, 05 & Up Tac/T100/Tndra (Part No.20135)
from
$889.99
8″ IFS clamshell carrier, 3.91 and up, 07 & up FJ, 05 & up TAC/T100/TNDRA.
Product Features:
See More
Product Features:
- Standard open carrier case
- Does not include spider gears
- Fits Toyota 8″ clamshell front
- 3.91 and up ratios only
Yukon Gear – Small Hole Yoke For ’82 And Older Toyota 8" And Landcruiser With 27 Spline (Part No.41102)
from
$55.99
Yukon small hole yoke for ’82 and older Toyota 8″ and Landcruiser with 27 spline. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits 1982 and down Toyota Landcruiser
- 27 spline
National – Multi Purpose Seal (Part No.710159)
from
$20.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – 8" Toyota Dropout Case, All New, Includes Adjusters (Part No.32096)
from
$289.99
8″ Toyota dropout case, all new, includes adjusters.
Product Features:
See More
Product Features:
- Fits Toyota 8″ with 4 cylinder engine
Yukon Gear – Inner Axle Seal For 7.5", 8" And V6 Toyota Rear (Part No.30014)
from
$23.99
Inner axle seal for 7.5″, 8″ and V6 Toyota rear.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Rear inner axle seal
- Fits Toyota 7.5″, 8″ with 4 cylinder engine, and V6
Yukon Gear – T8 30Spline Axle (24.64" – 29.08" Cut2Lth) 4340 – 106Mm Brake Pilot (Part No.21724)
from
$274.99
T8 30spline axle ’86-00 (24.64″ – 29.08″ CUT2LTH) 4340.
Product Features:
See More
Product Features:
- Fits 1979-2000 Toyota 8″ and V6 rear
- 4340 Chromoly
- 30 spline
- 29 1/8″ long
- Cut to length design fits 26.62″-29.26″ applications
- 106mm brake pilot
Yukon Gear – Toyota V6 Cross Pin Shaft (Part No.33416)
Yukon Gear – Standard Open Spider Gear Kit For Toyota 8" 4 Cylinder With 30 Spline Axles (Part No.16062)
from
$258.99
Yukon standard open spider gear kit for Toyota 8″ 4-cylinder with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits Toytoa 8″ 4 cylinder open differential
- Includes two side gears, two pinion gears, cross pin shaft, roll pin spider gear thrust washers.
Felpro – Differential Carrier Gasket (Part No.RDS 55431)
from
$8.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
National – Multi Purpose Seal (Part No.223253)
from
$17.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Bearings (Part No.KC-11445-Y)
from
$62.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Toyota 8" & V6 Pinion Nut Washer (Part No.33168)
from
$16.99
Toyota 8″ & V6 pinion nut washer.
Product Features:
See More
Product Features:
- Pinion nut for Toyota 8″ and V6
Yukon Gear – 8" Roll Pin, Solid (Part No.33412)
Yukon Gear – Toyota 7.5", 8", & V6 Ring Gear Bolt Retainer Plate (Part No.33061)
from
$6.99
Toyota 7.5″, 8″, & V6 ring gear bolt retainer plate (5 needed).
Product Features:
See More
Product Features:
- Ring gear bolt retainer plate for Toyota 7.5″ 8″ and 8″ V6
- 5 needed
National – Multi Purpose Seal (Part No.710114)
from
$22.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – V6 Side Bearing Adjuster Lock (Without Bolt) (Part No.33364)
Popular 1994 Toyota 4Runner Drivetrains Categories
1994 Toyota 4Runner Drivetrains
You count on your 1994 Toyota 4Runner to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 264 Drivetrains ranging in price from $2.99 to $1,356.99, you’re sure to find everything you need for your 1994 Toyota 4Runner.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 20 different brands like Valvoline, National, and Moog. 1994 Toyota 4Runner Drivetrains start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 1,140 extensive product reviews on 1994 Toyota 4Runner Drivetrains. Some of the top-rated Drivetrains products we carry are CV Axle Shaft Assembly with 4.6 stars and Uni-Fit C.V. Joint Boot Kit Inner Greater Than 3.35 In. Diameter with 3.5 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1994 Toyota 4Runner below to get started!
Top-Rated Drivetrains Brands For Your 1994 Toyota 4Runner
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1994 Toyota 4Runner running right for years to come. In our inventory you’ll find brands like Valvoline, National, Moog, and even more.
Popular Felpro Drivetrains
You’ll find popular Felpro brand products across Differentials. All are waiting to get your 1994 Toyota 4Runner back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated Drivetrains
If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 1994 Toyota 4Runner, and some of our most reviewed parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1994 Toyota 4Runner Drivetrains
What are the most purchased Drivetrains for the 1994 Toyota 4Runner?
Out of 264 Drivetrains for the 1994 Toyota 4Runner, the most popular in our inventory are:
from
$32.99
(18)
Uni-Fit C.V. Joint Boot Kit Outer greater than 3.58 In. Diameter
CV Quick Boot Kits
What are the top-rated 1994 Toyota 4Runner Drivetrains?
Top-rated Drivetrains for your 1994 Toyota 4Runner based on customer reviews/ratings are:
from
$132.99
(14)
CV Axle Shaft Assembly
“Axle appears to be identical to OEM. Joints are nice and tight. Boots and bands appear to be quality material. Only time will tell how they hold up.”
from
$29.99
(8)
Uni-Fit C.V. Joint Boot Kit Inner Greater Than 3.35 In. Diameter
“Worked great. Direct fit.”
