1994 GMC Yukon Engine Cooling Parts

Essential 1994 GMC Yukon Engine Cooling Parts

ACDelco – Engine Coolant Temperature Sensor (Part No.213-4333)

Engine Coolant Temperature Sensor

from

$42.99
ACDelco GM Original Equipment Engine Coolant Temperature Sensors monitor engine temperature, and are GM-recommended replacements for your vehicle’s original components. The engine temperature signal is used by the engine control module to adjust the air/fuel mixture and ignition timing. These original equipment engine coolant temperature sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Helps keep engine running at proper temperature
  • Alerts vehicle operator of high engine temperature conditions
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

KAI – Radiator (Part No.RAD622)

Radiator

from

$199.99
New Platinum Pro Radiator, 4.3/5.0/5.7 Liter Engines, With Engine And Trans Oil Cooler, 28 Inch Core

Product Features:
  • 4.3/5.0/5.7 Liter Engines, With Engine And Trans Oil Cooler, 28 Inch Core, Made Of Plastic and Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Victor Reinz – Engine Water Pump Installation Kit (Part No.18-10020-01)

Engine Water Pump Installation Kit

from

$9.49
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Felpro – Multi-Purpose O-Ring (Part No.35710)

Multi-Purpose O-Ring

from

$3.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

KAI – Coolant Reservoir (Part No.GM3014113)

Coolant Reservoir

from

$36.99
New Platinum Pro Coolant Recovery Tank, With Cap

Product Features:
  • With Cap, Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Felpro – Engine Coolant Outlet Gasket (Part No.35357)

Engine Coolant Outlet Gasket

from

$2.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Dorman – Coolant Housing/Water Outlet: With Housing and Gasket, 180 Degree Neck Angle (Part No.902-2038)

Coolant Housing/Water Outlet: With Housing and Gasket, 180 Degree Neck Angle

from

$15.49
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
See More

GM Genuine Parts – Engine Cooling Fan Blade (Part No.15-80739)

Engine Cooling Fan Blade

from

$66.99
GM Genuine Parts Engine Cooling Fan Blades are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Dorman – Coolant Air Bleeder Screw (Part No.902-112)

Coolant Air Bleeder Screw

from

$16.99
This engine coolant bleeder screw has been manufactured from durable material to prevent cooling system leaks. Matches the original screw for fit and function.

Product Features:
  • Ideal replacement – this engine coolant bleeder screw matches fit and function of the original equipment screw.
  • Durable materials – designed to withstand high cooling system temperatures and pressures.
  • Cost-effective solution – this bleeder screw offers original equipment quality at a competitive price
  • Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
See More

Dorman – Radiator Fan Assembly: Dual, Cost Effective & Reliable (Part No.620-653)

Radiator Fan Assembly: Dual, Cost Effective & Reliable

from

$284.99
This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:
  • Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
  • Complete package – assembly is designed with the same materials and components as the original part.
  • Quality assured – motors are tested in laboratory settings to ensure performance
  • Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
See More

ACDelco – GM Original Equipment Engine Coolant Temperature Sensor (Part No.C6020210271ACD)

GM Original Equipment Engine Coolant Temperature Sensor

from

$66.21
The ACDelco GM Original Equipment Engine Coolant Temperature Sensor monitors the engine temperature, and is a GM-recommended replacement for your vehicle’s original component. The engine temperature signal is used by the engine control module to adjust the air/fuel mixture and ignition timing. This original equipment engine coolant temperature sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Undergo the same stringent testing process as the original part
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Felpro – Engine Water Pump Gasket (Part No.36109)

Engine Water Pump Gasket

from

$19.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (Part No.54218)

Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack

from

$13.99
Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:
  • Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap.
  • Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
  • Seamless fit – reverse-engineered from the original equipment to fit perfectly
  • Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership
See More

Carquest Premium – Air Charge Temperature Sensor Connector (Part No.PTA1092)

Air Charge Temperature Sensor Connector

from

$33.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)

Radiator Cap Tester Adapter

from

$14.29
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

Imperial – Thermostatic Fan Control – Preset (Part No.226206)

Thermostatic Fan Control - Preset

from

$38.49
Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:
  • Preset thermostatic fan control
  • 185°F preset
  • For use with Imperial electric fans
  • Probe installs into radiator fins
See More

Felpro – Engine Water Pump Gasket (Part No.13032)

Engine Water Pump Gasket

from

$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Motorad – Integrated Thermostat Housing: With Seal, 207 Degrees (Part No.815-207)

Integrated Thermostat Housing: With Seal, 207 Degrees

from

$67.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Mr. Gasket – High Performance Thermostat (Part No.4365)

High Performance Thermostat

from

$27.49
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens At 195 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

Carquest Premium – COOLANT HOUSING (Part No.CH5169)

COOLANT HOUSING

from

$13.99
COOLANT HOUSING

Felpro – Engine Coolant Outlet Gasket (Part No.35271)

Engine Coolant Outlet Gasket

from

$2.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Mr. Gasket – Bolt Water Pump (Part No.4996)

Bolt Water Pump

from

$36.49
This Mr. Gasket Water Pump Bolt Set includes chrome plated grade 5 hex head fasteners and AN style washers to install the water pump on your small block Chevrolet with the short style water pump. AN washers have no exposed shoulder which offers a professional appearance. Includes one 3/8 inch-16 x 2-1/2 bolt, three 3/8 inch-16 x 1-3/4 inch bolts, and four 3/8 inch AN washers.

Product Features:
  • Chrome plated
  • Grade 5
  • AN washers with no exposed shoulder for a professional appearance
See More

Carquest Premium – Radiator Cap: 16 PSI (Part No.10330)

Radiator Cap: 16 PSI

from

$13.49
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Safety lever to vent coolant pressure before removal
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Carquest Premium – Radiator Cap: 16 PSI (Part No.10331)

Radiator Cap: 16 PSI

from

$16.79
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Safety lever to vent coolant pressure before removal
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Dorman – Help – Drain Cock-Brass-Screw In Style-1/8 In. NPT (Part No.61103)

Drain Cock-Brass-Screw In Style-1/8 In. NPT

from

$2.99
This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:
  • Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part.
  • Durable construction – this part is made of quality materials for a long service life
  • Saves money – offers original equipment quality at a competitive price
  • Quality assured – this petcock has undergone virtual testing to assure proper fit and function
See More

Edelbrock – Water Pump Cartridge for Small-Block Chevy (Part No.8828)

Water Pump Cartridge for Small-Block Chevy

from

$219.99
Edelbrock #8828 Water Pump small block Chevy cartridge style race designed for circle track and endurance racing applications, they feature a revised impeller entry, a hard black anodized finish and .100″ thicker rear cover for greater durability. Auxilia

Product Features:
  • Standard Impeller Rotation
  • Stainless Steel Material
  • 0.750 in. Ball/Ball Bearing
  • 5.8125 in. Block To Hub Height
  • Replacement Cartridge For Water Pump #8827
See More

Felpro – Engine Water Pump Gasket (Part No.35635)

Engine Water Pump Gasket

from

$6.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Carquest Premium – Universal Fan Clutch – 6" Thermal (Part No.215157)

Universal Fan Clutch - 6" Thermal

from

$76.99
Product Features:
  • Designed, tested, and built by application
  • OE performance, fit, and appearance
  • Precision machined
  • Out of box installation
See More

1994 GMC Yukon Engine Cooling Parts

Maybe you’re in the middle of a full rebuild of that 1994 GMC Yukon. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 95 different Engine Cooling Parts in our inventory ranging from $2.04 to $684.99. That means you can find the exact parts or products you need to keep that 1994 GMC Yukon running smoothly.

Engine Cooling Parts are only as good as their brand. We stock 19 different brands to make sure you have plenty of trusted parts to choose from for your 1994 GMC Yukon. Carquest Premium, Permatex, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Engine Cooling Parts for your 1994 GMC Yukon, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 2,207 reviews in this category, some of the top rated parts include Radiator Cap: 16 PSI with 4.5 stars and Engine Coolant Outlet Gasket with 4.8 stars.

So if you’re in the market for aftermarket Engine Cooling Parts to keep your 1994 GMC Yukon rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Engine Cooling Parts Brands To Make Your 1994 GMC Yukon Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1994 GMC Yukon demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Yukon the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.

Popular Delphi Engine Cooling Parts

We carry Delphi parts in our stock across Coolant Temperature Sensors categories, plus more. For a 1994 GMC Yukon, our most popular Delphi Engine Cooling Parts include:
Engine Coolant Temperature Sensor
from $29.99
(1)
Engine Coolant Temperature Sensor
Coolant Temperature Sensors

FAQs for 1994 GMC Yukon Engine Cooling Parts

What are the most purchased Engine Cooling Parts for the 1994 GMC Yukon?

Out of 95 Engine Cooling Parts for the 1994 GMC Yukon, the most popular in our inventory are:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Water Pump Housing Gaskets
Standard Thermostat: 195 Degrees
from $9.99
(107)
Standard Thermostat: 195 Degrees
Thermostats
Engine Water Pump Gasket
from $2.99
(68)
Engine Water Pump Gasket
Water Pump Gaskets

What are the top-rated 1994 GMC Yukon Engine Cooling Parts?

Top-rated Engine Cooling Parts for your 1994 GMC Yukon based on customer reviews/ratings are:
Radiator Cap: 16 PSI
from $9.79
(103)
Radiator Cap: 16 PSI
“I installed the cap with no problem. It worked out great.”
Engine Coolant Outlet Gasket
from $3.99
(100)
Engine Coolant Outlet Gasket
“Perfect fit”
Radiator Cap: 16 PSI
from $16.79
(91)
Radiator Cap: 16 PSI
“Better then the factory one”