1994 Ford Mustang Ignition Coils and Boots

Every single Delphi ignition coil is designed and endurance tested using high quality materials. This ensures fast starts, consistent engine performance and optimized fuel efficiency. We makes more than 10 million ignition coils for North America each year, and each one is engineered to OE design specifications for vehicles from Ford, Toyota, Nissan, Lexus, GM, Mazda, Chrysler, Subaru, Acura and more.

Product Features:

• Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
• Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
• Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
• We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues

Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, and crisper throttle response. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.

Product Features:

• Direct Plug In Replacement Direct OE Fit
• Advanced Bobbin Technology
• Standard Motor Products SMP Fd-478
• MSD 5527
• Standard Motor Products SMP Fd-478
• MSD 5527
• Resists Shock And Vibration
• Resists Corrosion

These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.

Product Features:

• Bolt-on Performance
• Factory replacement coil

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Built by IATF 16949 certified manufacturers for consistent durability
• Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
• Segmented secondary bobbins to distribute high voltage and prevent shorting
• Extensive design validation testing to ensure long-lasting reliability
• 100% end-of-line tested to ensure proper performance
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle¿s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Long service life and durable performance
• High dielectric strength for reliability
• Corrosion-resistant connections
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
• High reliability
• Long service life

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Built by IATF 16949 certified manufacturers for consistent durability
• Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
• Segmented secondary bobbins to distribute high voltage and prevent shorting
• Extensive design validation testing to ensure long-lasting reliability
• 100% end-of-line tested to ensure proper performance
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle¿s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Long service life and durable performance
• High dielectric strength for reliability
• Corrosion-resistant connections
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
• High reliability
• Long service life

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles. Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck. Motorcraft and Ford Parts are manufactured from first quality materials chosen specifically for maximum performance and application suitability. As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.

Product Features:

• These coils provide the exact spark timing that helps maximize the engine and emissions performance
• RFI suppression helps minimize electronic noise through a Ford patented spring assembly inside the coil boot
• Engineered to help withstand temperature extremes
• Internal insulation displacement connection is helps make high-reliability internal connections
• Interior insulation helps ensure no internal arcing
• Right fit for each application; helps provide ease of installation and removal
• High grade silicone rubber boot materials do not degrade or stick, aiding in environmental and dielectric sealing
• Housings engineered to help resist cracking in the most extreme conditions
• Ford-patented iron core lamination stack integrates rare earth magnets in the flux circuit to help deliver consistent high energy required for output

These coils feature advanced bobbin technology, highly specialized silicone magnetic steel cores, optimized winding, resistance and turns ratios to deliver 10-15% more energy than OEM coils. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct replacements for OEM coils. Must use factory firing order. Bodies and/or secondary towers molded in ACCEL yellow with brass secondary contacts.

Product Features:

• 10-15% More Energy
• Direct Plug In Replacement Direct OE Fit
• Advanced Bobbin Technology
• Highly Specialized Silicone Magnetic Steel Cores
• OBD II Compatible Safe
• Standard Motor Products SMP Fd-488
• MSD 5528

Every single Delphi ignition coil is designed and endurance tested using high quality materials. This ensures fast starts, consistent engine performance and optimized fuel efficiency. We makes more than 10 million ignition coils for North America each year, and each one is engineered to OE design specifications for vehicles from Ford, Toyota, Nissan, Lexus, GM, Mazda, Chrysler, Subaru, Acura and more.

Product Features:

• Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
• Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
• Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
• We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues

As the innovator and leader in stick coil technology DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.

Product Features:

• First Time Fit
• Built to DENSO Original Equipment Standards

Product Features:

• SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
• Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
• 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
• EPDM inner insulation stops power-robbing voltage leaks.
• With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
• Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
• Excellent interference suppression and consistent performance
• Easy lock terminals for more convenient installation.
• Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
• Broad coverage available for most vehicles on the road today
• Include grease pack to ensure easy installation and removal

Motorcraft Plug Wires are Manufactured of premium-quality materials to strict Ford Engineering standards. High-Dielectric Insulation helps maintain and control voltage delivery while reducing Radio Frequency Interference. EPDM/Silicone wire jacket, spark plug & coil/ distributor insulators help protect against oil and high temperatures. Optimized wire lengths help minimize part numbers while still providing proper fit. Designed and Tested to Stringent Ford Standards.

Product Features:

• Backed by Motorcraft’s Service Parts Warranty
• Designed for long life – key life durability testing (equivalent to 10 years/150,000 miles) is conducted in addition to on-vehicle durability testing.
• Optimized wire lengths help minimize part numbers while still providing proper fit.
• Wires are optimum lengths for easy installation.
• EPDM/Silicone wire jacket, spark plug AND coil / distributor insulators help protect against oil and high temperatures.
• Motorcraft ignition components help prevent false check engine lights.

Routing spark plug wires is an art form. It takes patience and time to route your wires away from the headers, through separators and to the distributor cap. Some wire sets fit perfect, but a lot of people want to build their own so they can route them exactly how they see fit. Our Universal spark plug wire sets come with the spark plug terminal and boot installed with the other end open. Distributor cap boots and terminals are included so you can cut the wire to the desired length, then install the terminal with the supplied Mini-Stripper-Crimper. It’s a little more work, but in the end it will be worth it.

Product Features:

• Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
• Distributor Cap – Boots and Terminals Included
• Incl. Mini-Stripper-Crimper

The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:

• Bolt-on Performance
• Custom Fit For Make And Model Listed
• Wires Are Pre-Cut To Exact Specifications
• Conductor core features DuPont Kevlar material for increased tensile strength
• Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
• Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function