1994 Ford Explorer Drive Shafts and Axles

Essential 1994 Ford Explorer Drive Shafts and Axles

Yukon Gear – Dana 28 (93^) & Model 35 Outer Axle/Hub Snap Ring (Part No.33269)

Dana 28 (93^) & Model 35 Outer Axle/Hub Snap Ring

from

$4.99
Dana 28 (93^) & Model 35 outer axle/hub snap ring.

Product Features:
  • Outer axle snap ring for AMC Model 35 IFS and 1993 and up Dana Spicer 28
See More

Yukon Gear – R1559Tv Rear Axle Bearing And Seal Kit (Part No.10001)

R1559Tv Rear Axle Bearing And Seal Kit

from

$52.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1559TV axle bearing and seal kit, TorringtonBrand, 2.530″ OD, 1.620″ ID This axle bearing & seal kit services one side only.

Product Features:
  • Includes axle bearing and seal
  • Services one side
  • Torrington Brand
  • 2.530″ O.D.
  • 1.620″ I.D.
See More

Yukon Gear – Replacement Outer Stub Dust Shield For Dana 30, Dana 44 & Model 35 (Part No.33015)

Replacement Outer Stub Dust Shield For Dana 30, Dana 44 & Model 35

from

$6.99
Product Features:
  • Outer stub dust shield for Dana Spicer 30, 44 and AMC Model 35 IFS
See More

Spicer – Axle Shft Univ Joint (Part No.5-3226X)

Axle Shft Univ Joint

from

$47.99
Axle Shft Univ Joint

National – Multi Purpose Seal (Part No.470672)

Multi Purpose Seal

from

$14.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Cardone – Front Drive Shaft: Greasable, Direct Replacement (Part No.65-9661)

Front Drive Shaft: Greasable, Direct Replacement

from

$657.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:
  • Built to match O.E. form, fit and function.
  • 100% NEW universal joints are installed to ensure proper fit and optimal performance.
  • All slip yokes are lubricated to prevent premature wear.
  • Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
See More

Yukon Gear – Ford 7.5", 8", 8.8", & 9" Axle Stud (Part No.33175)

Ford 7.5", 8", 8.8", & 9" Axle Stud

from

$6.99
Ford 7.5″, 8″, 8.8″, & 9″ axle stud.

Product Features:
  • Axle stud for Ford 7.5″, 8.8″ and 9″
  • 1/2″ x 20 thread
  • 1 7/8″ long
  • 29/64″ shoulder length
See More

Yukon Gear – Wheel Lug Stud (Part No.33571)

Wheel Lug Stud

from

$7.99
Wheel Lug Stud

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

EMPI – Axle Shaft Nut (Part No.K403055043EMP)

Axle Shaft Nut

from

$6.38
The EMPI Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Dorman – Spindle Nut (Part No.K1002754967DOR)

Spindle Nut

from

$36.90
Spindle Nut

Yukon Gear – C/Clip (Part No.33083)

C/Clip

from

$8.99
C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.

Product Features:
  • c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
  • .150″ thick
See More

Dorman – Help – Driveshaft Flange Bolts (Part No.80992)

Driveshaft Flange Bolts

from

$20.29
This drive shaft bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine mount bolt matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this drive shaft bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

National – Bearings (Part No.FC-66998)

Bearings

from

$10.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Axle Repair Bearing (Part No.S-RP-6408)

Axle Repair Bearing

from

$24.29
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – Yoke For Ford 8.8" Truck U/Joint Size (5" Od) (Part No.41050)

Yoke For Ford 8.8" Truck U/Joint Size (5" Od)

from

$221.99
Yukon yoke for Ford 8.8″ truck U/joint size (5″ OD). All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 8.8″
  • 30 spline
  • Round companion flange
  • 5.00″ O.D.
See More

Dorman – Differential Pinion Yoke Assembly (Part No.697-555)

Differential Pinion Yoke Assembly

from

$79.99
Drive shaft pinion yoke corroded or damaged? This pinion yoke directly replaces the original equipment on specific vehicle years, makes and models to restore smooth driving.

Product Features:
  • Direct replacement – this drive shaft pinion yoke directly replaces the original equipment on specified vehicles
  • Effective fix – replacement restores proper connection between drive shaft and differential
  • Rigorously tested – designed and evaluated to assure safe, reliable operation
  • Trustworthy quality – backed by team of engineers and inspectors in the United States
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6062)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$40.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to FORD 84-98;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1984-1998
  • Weight approx: 2 Lbs
  • BEARING ID / BORE: 1.1811 INCH / 30 MM
  • CENTERLINE: 2.20 INCH / 56 MM
  • MOUNT WIDTH: 6.00 INCH / 152 MM
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6061)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$14.79
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to FORD 84-98;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1984-1998
  • Weight approx: 2 Lbs
  • BEARING ID / BORE: 1.2570 INCH / 32 MM
  • CENTERLINE: 2.00 INCH / 51 MM
  • MOUNT WIDTH: 5.90 INCH / 150 MM
See More

National – Axle Shaft Seal (Part No.710950)

Axle Shaft Seal

from

$25.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
See More

Yukon Gear – Left Inner Axle Replacement Seal For Dana 44, 50, Model 35 IFS (Part No.30138)

Left Inner Axle Replacement Seal For Dana 44, 50, Model 35 IFS

from

$25.99
Left inner axle replacement seal for Dana 44, 50, Model 35 IFS.Yukon Mighty seal.

Product Features:
  • Inner axle seal
  • Left hand side
  • Fits Dana Spicer 44 IFS, AMC Model 35 IFS and Dana Spicer 50 IFS
See More

Pro-King – Differential Axle Seal (Part No.742G074)

Differential Axle Seal

from

$4.49
Pro-King High Quality Differential Products are designed for trouble free installation and setup.
See More

Dorman – U-BOLT KIT (Part No.929-761)

U-BOLT KIT

from

$26.99
The components in this leaf spring axle U-bolt kit are designed to securely hold the leaf spring or leaf spring bundle to the underside of an axle of a vehicle or trailer. Check the leaf spring dimensions and other relevant application details to select the right type and size U-bolt kit for your needs..

Product Features:
  • Reliable hardware – the components in this leaf spring axle U-bolt kit are designed to securely hold the leaf spring or leaf spring bundle to the underside of a vehicle or trailer axle.
  • Check fit – carefully review the dimensions of the leaf springs that will be used and other relevant application details to select the right type and size U-bolt kit for your needs
  • Durable construction – the components in this kit are engineered from quality materials for reliable performance and long service life
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

National – Bearings (Part No.HM88610)

Bearings

from

$15.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.M802011)

Bearings

from

$14.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

1994 Ford Explorer Drive Shafts and Axles

Maybe you’re in the middle of a full rebuild of that 1994 Ford Explorer. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 40 different Drive Shafts and Axles in our inventory ranging from $4.99 to $883.99. That means you can find the exact parts or products you need to keep that 1994 Ford Explorer running smoothly.

Drive Shafts and Axles are only as good as their brand. We stock 11 different brands to make sure you have plenty of trusted parts to choose from for your 1994 Ford Explorer. Spicer, National, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Drive Shafts and Axles for your 1994 Ford Explorer, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 58 reviews in this category, some of the top rated parts include Multi Purpose Seal with 5.0 stars and Wheel Lug Stud with 3.0 stars.

So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 1994 Ford Explorer rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Drive Shafts and Axles Brands To Make Your 1994 Ford Explorer Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1994 Ford Explorer demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your Explorer the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.

Popular Dorman – Help Drive Shafts and Axles

We carry Dorman – Help parts in our stock across Drive Shaft Support Bolts categories, plus more. For a 1994 Ford Explorer, our most popular Dorman – Help Drive Shafts and Axles include:
Driveshaft Flange Bolts
from $20.29
(1)
Driveshaft Flange Bolts
Drive Shaft Support Bolts

Top 1994 Ford Explorer Drive Shafts and Axles from National

National products are another trusted brand when it comes to Drive Shafts and Axles for your 1994 Ford Explorer. Popular National parts include:
Multi Purpose Seal
from $10.99
(19)
Multi Purpose Seal
Axle Shaft Seals
Bearings
from $14.79
(3)
Bearings
Drive Shaft Bearings
Shaft Repair Sleeve
from $33.99
(1)
Shaft Repair Sleeve
Drive Shaft Seals

FAQs for 1994 Ford Explorer Drive Shafts and Axles

What are the most purchased Drive Shafts and Axles for the 1994 Ford Explorer?

Out of 40 Drive Shafts and Axles for the 1994 Ford Explorer, the most popular in our inventory are:
Universal Joint
from $51.99
(7)
Universal Joint
Axle Shaft Universal Joints
Universal Joint
from $28.99
(12)
Universal Joint
Axle Shaft Universal Joints
Axle Repair Bearing
from $24.29
(11)
Axle Repair Bearing
Rear Axle Shaft Bearings

What are the top-rated 1994 Ford Explorer Drive Shafts and Axles?

Top-rated Drive Shafts and Axles for your 1994 Ford Explorer based on customer reviews/ratings are:
Multi Purpose Seal
from $11.49
(1)
Multi Purpose Seal
“good fit”
Wheel Lug Stud
from $7.99
(1)
Wheel Lug Stud
“These are SCREW in design (even though the image shows press) not entirely sure how they “fit” my 2016 JKU Rubicon since my factory and Yukon after ma”
Multi Purpose Seal
from $14.99
(1)
Multi Purpose Seal
“when i opened the box the seal was bent. I needed it right away, so I used my press to flatten it back out. Once it was installed, i can see that the ”