1994 Ford E-150 Econoline Transfer Case Fluids

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

• MAXLIFE TECHNOLOGY PREVENTS engine breakdown with 40% better wear protection than the industry standard
• REFRESH AGING SEALS AND PREVENT LEAKS with seal conditioners
• REDUCE SLUDGE, DEPOSITS, CORROSION, AND RUST with added detergents – keep motors clean inside
• ENHANCED FRICTION PERFORMANCE HELPS MAXIMIZE POWER with advanced friction-fighting agents
• MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
• MaxLife Technology: Valvoline High Mileage with MaxLife Technology is specially formulated to maximize engine life in vehicles with over 75,000 miles, providing superior protection against wear, friction, heat, and deposits.
• Synthetic Blend Composition: This motor oil features a unique combination of synthetic and premium conventional oils, ensuring optimal performance and protection for high-mileage engines.

Valvoline SAE 75W-90 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our detergent package-based formulation contains Full Synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance. Protect your gears with Valvoline, the #1 gear oil brand.

Product Features:

• EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION , ranging from -30F to 300F degrees
• REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
• FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
• MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP HYPOID DIFFERENTIALS where APPI GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
• MEETS OR EXCEEDS THE PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2361

Pennzoil Platinum Full Synthetic 5W-30 is designed to maximize engine protection and is backed by a 15,000-mile protection guarantee (see Warranty Information below) to protect your pursuit of every mile. Made with natural gas, it is formulated for complete protection for top engine performance. Pennzoil Platinum offers cleaner pistons (based on Sequence IIIH results), helps protect engines from loss of power, delivers better fuel economy (based on the latest industry standard), provides unsurpassed wear protection (based on Sequence IVA wear test using SAE 5W-30), and provides excellent performance in extreme temperatures. (Pennzoil Platinum Lubrication Limited Warranty: Protection for up to 15,000 miles or one year, whichever comes first. Use an oil filter designed for longer oil change intervals and follow OEM manual and vehicles oil life sensor to maintain OEM warranty. Excludes severe driving conditions, including racing and commercial use. Your engine must have fewer than 125,000 miles and have been manufactured in the past 72 months. Enrollment required. Other conditions apply. See pennzoil.com/warranty to enroll and for full details and terms.)

Product Features:

• Full synthetic 5W-30 motor oil that is made with natural gas and designed to maximize engine protection
• Backed by a 15,000-mile protection guarantee to protect your pursuit of every mile
• Provides better fuel economy (based on the latest industry standards)
• Keeps pistons cleaner than required by the toughest industry standard (based on Sequence IIIH results)
• Designed for high-performance engines
• Formulated to provide faster low-temperature oil flow and protection in extreme heat
• Helps protect engines from loss of power
• Meets or exceeds the requirements of the following industry specifications: API SP, API SP-Resource Conserving, and all previous categories; ILSAC GF-6A
• Meets or exceeds the following OEM requirements: Chrysler MS-6395, MS-13340; GM dexos1 Gen. 3; Ford WSS-M2C961-A1
• For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency & longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

• MAXLIFE TECHNOLOGY PREVENTS engine breakdown with 40% better wear protection than the industry standard.
• REFRESH AGING SEALS AND PREVENT LEAKS with seal conditioners
• REDUCE SLUDGE, DEPOSITS, CORROSION, AND RUST with added detergents – keep motors clean inside
• ENHANCED FRICTION PERFORMANCE HELPS MAXIMIZE POWER with advanced friction-fighting agents
• MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
• MaxLife Technology: Valvoline High Mileage with MaxLife Technology is specially formulated to maximize engine life in vehicles with over 75,000 miles, providing superior protection against wear, friction, heat, and deposits.
• Synthetic Blend Composition: This motor oil features a unique combination of synthetic and premium conventional oils, ensuring optimal performance and protection for high-mileage engines.

Max Gear is recommended for truck and automotive differentials, outboard motor lower units or in rear axles or manual transmissions requiring an API fluid. Max Gear is a high performance automotive gear oil designed to provide maximum protection to heavily loaded gears while increasing power throughput through the drive train. Max Gear virtually eliminates both gear and bearing wear-even under severe squeeze film conditions caused by extremely high loads, sudden shock loads or low RPMs. Slippery, synthetic molecules not only reduce wear and friction but significantly increase Max Gear’s cold weather fluidity and lubricity, making it the ideal choice for vehicles operating in cold climates. Gears run smoother, quieter, cooler and longer without overhauls. It is noncorrosive to both ferrous and nonferrous metals.

Product Features:

• Maximizes horsepower
• Extends gear and bearing life
• Reduces operating temperature
• Lower coefficient of friction
• Superior corrosion protection
• Separates rapidly from water
• For use with open, limited-slip and locking differential
• Contains limited-slip friction modifier
• Made in USA

We’ve squeezed innovation into every ounce of Valvoline FlexFill SAE 75W-140 Full Synthetic Gear Oil, the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Our unique new flexible pouch makes getting into the tightest places to lubricate gears easier than ever and with less waste. The superior detergent package-based formulation contains fully synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline FlexFill SAE 75W-140 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance.

Product Features:

• Flexible Pouch For Easier Use With Less Waste In Tight, Hard To Reach Undercarriage Situations.
• Exceptional High And Low Temperature Protection Ranging From -30F To 300F Degrees For Dependable Coverage Year-Round
• Reduces Chattering And Protects Gear Teeth From Oxidation, Rust, And Wear
• Meets The Demands Of Conventional And Limited Slip Rear Differentials Where Api Gl-5 Is Specified, As Well As Non-Synchronized Manual Transmissions That Require Api Gl-4
• Meets Or Exceeds Performance Requirements For Ford M2C-192A, Gm 12346140, Chrysler Ms-8985 And Api Gl-5

Pennzoil Ultra Platinum Full Synthetic 5W-30 motor oil is our most advanced formulation with unbeatable wear and sludge protection, as well as unbeatable cleanliness. When it comes to torturous driving conditions, trust the unbeatable engine protection(1) of Pennzoil Ultra Platinum. It far exceeds the most stringent car manufacturer requirements for cleanliness and protection (based on ILSAC GF-6); it offers outstanding performance in extreme temperatures and better fuel economy (based on the latest industry standard) Pennzoil Ultra Platinum helps extend the life of your engine and protects for up to 20 years or 750,000 miles, whichever comes first(1)(1), to give you peace of mind to drive every mile as hard as you can, from your daily commute to sand dunes and mountain terrain ((1)Based on Sequence IVA wear test; Sequence IIIH oxidation and deposit test; and the Sequence VH sludge test.if you exclusively use Pennzoil Ultra Platinum Full Synthetic motor oil. Your engine must have fewer than 125,000 miles and have been manufactured in the past 72 months.. .)

Product Features:

• Our most advanced full synthetic 5W-30 engine oil, designed for unbeatable engine protection(1)
• Made with natural gas
• Outstanding performance in extreme temperatures
• Designed for high-performance engines, it helps protect engines from loss of power
• Provides unsurpassed wear protection for your engine (based on Sequence IVA wear test using SAE 5W-30)
• Provides better fuel economy (based on the latest industry standard)
• Exceeds the requirements of the following industry specifications: API SP-Resource Conserving and all previous categories; ILSAC GF-6A; ACEA A1/B1 and ACEA A5/B5
• Meets or exceeds the following OEM requirements: Chrysler MS-6395; WSS-M2C961-A1; Honda/Acura HT0-06