1994 Ford Bronco Drive Shafts and Axles

Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.

Product Features:

• c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
• .150″ thick

Anchor 6056 Center support bearings support a driveshaft between transmission and differential. This mount relieves stress on driveline components. Each part is engineered and designed to OE Standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

Dana 28, Dana 30, Dana 44, Dana 50 outer stub snap ring (inside locking hub).

Product Features:

• Outer stub snap ringn for Dana Spicer 28, 30, 44 and 50

Upgrade and simplify your driveshaft replacement with a premium driveshaft that’s delivered fully assembled, dynamically pre-balanced and ready for a fast, hassle-free installation on specified vehicle makes, models and years. Engineered and manufactured in the USA, the driveshaft is manufactured from high-precision, drawn over mandrel (DOM) seamless steel tubing that offers superior concentricity, uniform wall thickness and greater torsional strength and dent resistance than standard welded steel. The assembly includes 100% new-not remanufactured-components, including yokes, CV joints and U-joints. A premium quality driveshaft assembly deserves premium packaging; this product ships in protective foam-in-place packaging to ensure it arrives in the same pristine, install-ready condition in which it left the manufacturing facility.

Product Features:

• Ready to install – this premium driveshaft assembly arrives fully assembled, dynamically pre-balanced and ready for a fast, hassle-free installation on specified vehicle makes, models and years
• Premium shaft – made from drawn over mandrel (DOM) seamless steel tubing for superior concentricity, uniform wall thickness and more torsional strength and dent resistance than standard welded steel
• All-new construction – built in the USA with 100% new-not remanufactured-tubing, yokes, CV joints, and U-joints
• Superior packaging – assembly ships in protective foam-in-place packaging to ensure it is delivered in the same pristine, install-ready condition in which it left the manufacturing facility

When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.

This axle vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this axle vent is designed to match the fit and function of the original vent on specified vehicles
• Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Yukon Gear & Axle manufactures a full line of top-quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers, and other general maintenance items. For all your differential small parts needs, look no further than Yukon.

Product Features:

• Axle bearing
• Fits Ford 9″
• Conversion bearing to install small bearing axle into large bearing housing
• 3.150″ O.D.
• 1.377″ I.D.

Product Features:

• Brand may vary by location

Remanufactured Rear Axle assemblies are completely disassembled and thoroughly cleaned and reassembled using new wear parts: gears, pinions, assembly bolts, bearings, seals, etc. Each unit is micrometer checked for proper gear mesh. Units are assembled, sealed and include backing plates, axle shafts and fluid. Axles are packaged in heavy plastic to protect the unit & aid in returning the core.

Product Features:

• Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
• Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
• Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
• Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio

Remanufactured Rear Axle assemblies are completely disassembled and thoroughly cleaned and reassembled using new wear parts: gears, pinions, assembly bolts, bearings, seals, etc. Each unit is micrometer checked for proper gear mesh. Units are assembled, sealed and include backing plates, axle shafts and fluid. Axles are packaged in heavy plastic to protect the unit & aid in returning the core.

Product Features:

• Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
• Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
• Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
• Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio

Yukon Gear and Axle manufactures a complete line of general replacement and performance series of pinion yokes for many street, racing, and heavy-duty off-road applications.

Product Features:

• Fits Ford 8.8″
• 30 spline
• 1330 u-joint size
• 3.625″ snap ring span
• 1.062″ cap diameter
• Outside snap ring design
• Strap style

Yukon Gear and Axle manufactures a complete line of general replacement and performance series of pinion yokes for many street, racing, and heavy-duty off-road applications.

Product Features:

• Fits Dana Spicer 44
• 26 spline
• 1330 u-joint size
• 3.625″ snap ring span
• 1.125″ cap diameter
• Outside snap ring design
• U-bolt style

Yukon high-performance axles are built with high-tensile strength 4340 chromoly, use superior production methods that include cold roll formed splines, and feature advanced induction coil heat treating to create an axle of unmatched quality and durability.

Product Features:

• Fits Dana 44 differential
• 19 spline
• Front outer axle
• Heavy duty 4340 chromoly construction
• Uses 5-760X Series u-joint

9.72″ 19spline 297X Bronco & F150, Wagoneer w/drum brakes, outer stub.

Product Features:

• Fits Dana Spicer 44 in Ford F150 and Bronco and Jeep Wagoneer with drum brakes
• 4340 Chromoly
• Outer stub
• 19 spline
• 9.72″ from end of splines to center of u-joint bore

Spicer end yokes deliver the same quality and reliability you expect from your original equipment parts. That is because they are OE parts, manufactured to the same standards and specifications as the end yokes that were installed in your vehicle in the first place.

Product Features:

• Genuine OE quality. Tested and proven.
• Built to meet OE standards set by Dana
• Tested and validated to rigorous OE specifications
• Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace

Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.

Product Features:

• BUILT TO LAST: Advanced heat treatment process for strength
• PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
• RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
• COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
• RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
• SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
• OE-STYLE DESIGN — Engineered to meet OE specifications
• COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
• RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design type: spring loaded; multi-lip
• Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
• Good low temperature capability
• Low swell in hydrocarbon fluids
• Delivers quality and reliable performance for every type of repair

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design type: spring loaded; multi-lip
• Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
• Good low temperature capability
• Low swell in hydrocarbon fluids
• Delivers quality and reliable performance for every type of repair

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design type: spring loaded; single-lip
• Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
• Good low temperature capability
• Low swell in hydrocarbon fluids
• Delivers quality and reliable performance for every type of repair

Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.

Product Features:

• BUILT TO LAST – Advanced heat treatment process for strength
• PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
• RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
• COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
• RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.

Product Features:

• BUILT TO LAST – Advanced heat treatment process for strength
• PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
• RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
• COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
• RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Tapered axle bearing and seal kit, 3.150″ OD, for 9″ Ford. This axle bearing & seal kit services one side only.

Product Features:

• Axle bearing and seal kit for Ford 9″ rear
• Includes axle bearing and seal
• Tapered roller design
• 3.150″ O.D.
• 1.562″ I.D.
• Services one side

Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1559TV axle bearing and seal kit, TorringtonBrand, 2.530″ OD, 1.620″ ID This axle bearing & seal kit services one side only.

Product Features:

• Includes axle bearing and seal
• Services one side
• Torrington Brand
• 2.530″ O.D.
• 1.620″ I.D.

Ford 7.5″, 8″, 8.8″, & 9″ axle stud.

Product Features:

• Axle stud for Ford 7.5″, 8.8″ and 9″
• 1/2″ x 20 thread
• 1 7/8″ long
• 29/64″ shoulder length

Wheel Lug Stud

Model 20 & Model 35 axle stud 0.620″ Dia. Shank.

Product Features:

• Axle stud for AMC Model 20 and Model 35
• 1/2″ x 20 thread
• 0.620″ knurl diameter
• 1.625″ long

Product Features:

• Fits 2010-2014 Ford F150 SVT RAPTOR ONLY
• Left hand side
• 31 spline