1994 Chevrolet K2500 Spark Plug Boots

The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:

• Less than 50 ohms per foot for superior spark
• Ferro-magnetic impregnated core creates an effective EMI choke
• 40 ft. Of Conductor Wound Into A Single Foot Of Wire
• For high EMI suppression
• Conductor core features Dupont Kevlar material
• Proprietary compound sleeves for resistance to high heat/abrasion

Pre-Greased Spark Plug Boots for Quicker Installation; Delphi Packard-marked Cable for OE Component Confirmation; OE Boots, Terminals, and Lead Lengths for No Hassle Installation; Application Correct Seven and Eight Millimeter Cable Sizes for Correct Fit

Product Features:

• Pre-greased spark plug boots for quicker installation
• OE boots, terminals and lead lengths for no hassle installation

ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.

Product Features:

• Professional, premium aftermarket replacement
• Provides the performance and dependability you expect from ACDelco
• Manufactured to meet expectations for fit, form, and function

These ACCEL 8.8mm wires feature a carbon/graphite core that virtually eliminate RFI noise while providing maximum conductivity for ultimate performance in any race or street application. Double silicon insulation eliminates leakage and misfire.

Product Features:

• 500 Ohms Per Foot Of Resistance
• 550░ F Rated Silicone Jacket
• 550° F Rated Silicone Jacket
• Stainless Steel Plug Terminals
• Custom-fit Universal And Import Coverage
• Pre And Post HEI Vehicles
• Silicone Spark Plug Boots

NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:

• PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
• BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
• STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
• CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier

JBA PowerCables ignition wires are less than half the resistance of most factory wires, which frees sparkenergy and increases performance! Get as much as 5+ hp gain with JBA PowerCables as tested by CarCraft Magazine.

Product Features:

• JBA Performance Exhaust W0821 Ignition Wires 88-95 GM 454 Truck Red
• Extra thick diameters for improved under hood appearance

ACCEL now offers the cure for burnt spark plug boots with Extreme 9000 Ceramic wire kits. The 8mm Ferro-Spiral core wire now has ceramic boots on the spark plug end of the wires. Ceramic boots withstand up to 2,000 degrees. Great for running headers with close tolerances, an engine bay with little room, or an RV with boots that melt because of heat. Ultra high temperature double silicone construction wire rated at 600 degrees fahrenheit peak. 500 ohms/ft Ferro-Spiral core developed for performance use. Excellent energy delivery to the spark plugs, while providing the highest level of RFI/EMI suppression. Stainless steel spark plug terminals for maximum spark energy to the plugs. Pre-made to factory lengths for a perfect fit.

Product Features:

• Ceramic boots withstand up to 2,000░ Fahrenheit
• Ceramic boots withstand up to 2,000° Fahrenheit
• 8mm double silicone construction black wire rated at 600░ F rated
• 8mm double silicone construction black wire rated at 600° F rated
• 500 Ohms/foot ferro sprial core offers the highest level of RFI/EMI suppression
• Universal and custom fit applications
• Universal And Custom Fit Applications

The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:

• Custom Fit For Make And Model Listed
• Wires Are Pre-Cut To Exact Specifications
• Bolt-on Performance
• Conductor core features DuPont Kevlar material for increased tensile strength
• Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
• Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately