1994 Chevrolet K1500 Steering and Chassis Parts

Essential 1994 Chevrolet K1500 Steering and Chassis Parts

Lares – Remanufactured Power Steering Gear Box (Part No.1417)

Remanufactured Power Steering Gear Box

from

$195.99
Power Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More

Rare Parts – Tie Rod Sleeve (Part No.RP25522)

Tie Rod Sleeve

from

$21.79
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Complete with clamps
  • Used to set Toe in or out
  • replaces rusted or corroded sleeves
  • Used to connect inner and outer tie rod ends
See More

Dorman – Help – Power Steering Caps (Part No.82581)

Power Steering Caps

from

$5.99
This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.

Product Features:
  • Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap
  • Durable construction – made of quality materials for leak-free performance and a long service life
  • Cost-effective solution – offers original equipment quality at competitive price
  • Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance
See More

Powercraft – Steering Gear Complete Rebuild Kit (Part No.8781)

Steering Gear Complete Rebuild Kit

from

$78.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Powercraft – Pump Drive Shaft Seal Kit (Part No.8709)

Pump Drive Shaft Seal Kit

from

$13.29
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Rare Parts – Sway Bar Link (Part No.RP23041)

Sway Bar Link

from

$52.99
Sway Bar Link

ACDelco – Professional Ball Joint (Part No.L2020577187ACD)

Professional Ball Joint

from

$93.45
ACDelco ball joints are designed for easier steering. ACDelco chooses the best design for the application, often incorporating advanced technology some competitors don’t match.

Product Features:
  • Superb strength and durability thanks to precision manufactured housing and components
  • Advanced corrosion protection against the harshest conditions
  • Permanently attached boot reduces contamination, makes installation easier
  • Full ball stud and patented two-piece cylindrical wedge bearing for tighter overall fit and fatigue resistance
  • No spring means no end play, easier installation
  • One-piece forged housing for easier steering
See More

Factory Air – Transmission Oil Cooler Replacement Hose (Part No.53015)

Transmission Oil Cooler Replacement Hose

from

$14.49
Covered in black Hypalon
See More

National – Multi Purpose Seal (Part No.7013S)

Multi Purpose Seal

from

$20.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Carquest Premium – TIE ROD END (Part No.300-65142)

TIE ROD END

from

$95.99
Product Features:
  • OE matched design for Form, Fit, and Function
  • Advanced corrosion-resistant electro-coating to reduce rust
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs &/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
  • Thread locking compound included.
See More

Driveworks – Idler Arm (Part No.DW-K6390)

Idler Arm

from

$57.99
Driveworks Brand idler arms help to restore vibration-free driving and prevent tire wear. Driveworks Brand chassis parts promote improved steering response and durability.

Product Features:
  • Meets or exceeds OE performance specifications
  • Precision engineered for improved ride and superior performance
  • Performance tested to ensure durability
See More

MOOG – Pitman Arm (Part No.K6335)

Pitman Arm

from

$53.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Heavy duty design
  • Engineered steel composition results in a stronger component
  • Loose or worn chassis parts can lead to premature tire wear
  • Exclusive cover plate protects against contaminants leaking into the bearing surface
  • Patented cover plate design allows for tighter tolerances vs traditional designs for a more durable part
  • Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
See More

Dorman – Suspension Stabilizer Bar (Part No.927-101)

Suspension Stabilizer Bar

from

$199.99
This suspension stabilizer bar, also called a sway bar, matches the fit and function of the original sway bar on specified vehicles to restore reliable vehicle handling. With a corrosion-resistant finish, it includes installation hardware.

Product Features:
  • Ideal replacement – this sway bar matches the fit and function of the original part on specified vehicle years, makes and models
  • Durable construction – this sway bar is made of quality materials with a corrosion-resistant finish
  • Cost-effective solution – offers original equipment quality at competitive price
  • Quality tested – this part has undergone testing to ensure a quality fit and long service life
See More

Carquest Premium – Pressure Hose Assembly (Part No.36547)

Pressure Hose Assembly

from

$88.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

MOOG – Torsion Bar Key (Part No.K100011)

Torsion Bar Key

from

$316.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Allows adjustment range from 1/2 to 1 1/2
  • Restores ride height to be within OE specifications for vehicles with a fatigued torsion bar
See More

Driveworks – Steering Tie Rod End (Part No.DW-ES2836RL)

Steering Tie Rod End

from

$36.49
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:
  • Meets or exceeds OE performance specifications
  • Performance tested to ensure durability
  • Forged micro-alloy steel construction for strength and durability
  • A slotted nut and cotter pin for a more secure installation
See More

Cardone – Power Steering Pump (Part No.20-1027)

Power Steering Pump

from

$101.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Powercraft – Steering Gear Complete Pitman Shaft Seal Kit (Part No.8763)

Steering Gear Complete Pitman Shaft Seal Kit

from

$67.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Carquest Premium – Chassis Wiring Harness Connector (Part No.PTA2913)

Chassis Wiring Harness Connector

from

$90.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Power Steering Pump Pulley (Part No.300-200)

Power Steering Pump Pulley

from

$29.99
This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
  • Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Driveworks – Taper Bearing Cone (Part No.S-M-88048)

Taper Bearing Cone

from

$11.29
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

MOOG – Stabilizer Bar Bushing Kit (Part No.K6453)

Stabilizer Bar Bushing Kit

from

$27.49
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PREMIUM MATERIALS┐–┐Made from high-quality thermoplastic material for durability and ride performance
  • EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Inner sleeve is phosphate coated for corrosion protection
See More

Driveworks – Camber Bolt Kit (Part No.DW-K6302)

Camber Bolt Kit

from

$33.49
Driveworks Brand Camber Cam Bolt Kit is mainly used for car chassis suspension system

Product Features:
  • Meets or exceeds OE performance specifications
  • Precision engineered for improved ride and superior performance
  • Performance tested to ensure durability
See More

Dorman – Suspension Control Arm (Part No.521-913)

Suspension Control Arm

from

$124.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Cardone – Power Steering Filter (Part No.20-0058F)

Power Steering Filter

from

$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

MOOG – Center Link (Part No.DS1407)

Center Link

from

$91.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Loose or worn chassis parts can lead to premature tire wear
  • Engineered steel composition results in a stronger component
  • Engineered to meet or exceed OE standards
See More

Driveworks – Ball Joint (Part No.DW-K6292)

Ball Joint

from

$53.99
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:
  • Forged housing provides exceptional strength and durability
  • Oxidation film on the surface of the metal protects against corrosion
  • Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
  • Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
See More

Powercraft – Steering Gear Input Shaft Seal Kit (Part No.8777)

Steering Gear Input Shaft Seal Kit

from

$15.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

1994 Chevrolet K1500 Steering and Chassis Parts

You count on your 1994 Chevrolet K1500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 140 Steering and Chassis Parts ranging in price from $2.99 to $1,131.99, you’re sure to find everything you need for your 1994 Chevrolet K1500.

Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 22 different brands like Driveworks, Moog, and Imperial. 1994 Chevrolet K1500 Steering and Chassis Parts start as low as $2.99!

One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 5,396 extensive product reviews on 1994 Chevrolet K1500 Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Ball Joint with 3.9 stars and Power Steering Oil Cooler with 3.7 stars.

Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1994 Chevrolet K1500 below to get started!

Top-Rated Steering and Chassis Parts Brands For Your 1994 Chevrolet K1500

Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1994 Chevrolet K1500 running right for years to come. In our inventory you’ll find brands like Driveworks, Moog, Imperial, and even more.

Popular KYB Steering and Chassis Parts

You’ll find popular KYB brand products across Steering Dampers. All are waiting to get your 1994 Chevrolet K1500 back on the road. Some of the top-rated KYB products in these categories are:
Steering Stabilizer
from $76.99
(1)
Steering Stabilizer
Steering Dampers

Top-Rated Driveworks Steering and Chassis Parts


If Driveworks are what you’re looking for, our inventory holds plenty. We stock Driveworks brand Steering and Chassis Parts for your 1994 Chevrolet K1500, and some of our most reviewed Driveworks parts include:
Suspension Sway Bar Link Kit
from $17.29
(120)
Suspension Sway Bar Link Kit
Sway Bar Link Kits
Pitman Arm
from $44.99
(46)
Pitman Arm
Pitman Arms
Steering Tie Rod End Adjusting Sleeve
from $21.49
(38)
Steering Tie Rod End Adjusting Sleeve
Tie Rod End Sleeves

FAQs for 1994 Chevrolet K1500 Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the 1994 Chevrolet K1500?

Out of 140 Steering and Chassis Parts for the 1994 Chevrolet K1500, the most popular in our inventory are:
Transmission Oil Cooler Hose
from $32.49
(94)
Transmission Oil Cooler Hose
Power Steering Pressure Hoses
Mounting Kit System
from $11.49
(27)
Mounting Kit System
Power Steering Coolers
Stabilizer Bar Link Kit
from $31.99
(56)
Stabilizer Bar Link Kit
Sway Bar Link Bushing Kits

What are the top-rated 1994 Chevrolet K1500 Steering and Chassis Parts?

Top-rated Steering and Chassis Parts for your 1994 Chevrolet K1500 based on customer reviews/ratings are:
Ball Joint
from $69.94
(114)
Ball Joint
“Great headlights”
Power Steering Oil Cooler
from $28.49
(83)
Power Steering Oil Cooler
“Installed and properly working”
Power Steering Filter
from $31.99
(59)
Power Steering Filter
“Looks good and fits well, plus LTW”