1994 Chevrolet Caprice Ignition Coils and Boots

Essential 1994 Chevrolet Caprice Ignition Coils and Boots

DENSO – Spark Plug Wire Set: Carbon Core, 6 Wire Set (Part No.671-6020)

Spark Plug Wire Set: Carbon Core, 6 Wire Set

from

$60.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

NGK – Coil on Plug Boot (Part No.58984)

Coil on Plug Boot

from

$9.49
NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.

Product Features:
  • PREMIUM GRADE SILICONE: Designed to withstand harsh environments
  • OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
See More

NGK – NGK Wire Set (Part No.51109)

NGK Wire Set

from

$79.99
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-8117)

Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit

from

$42.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

MSD Ignition – Wire Set; Super Conductor; Chevy 454; HEI; 74-76; (Part No.31369)

Wire Set; Super Conductor; Chevy 454; HEI; 74-76;

from

$158.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Custom Fit For Make And Model Listed
  • Wires Are Pre-Cut To Exact Specifications
  • Bolt-on Performance
  • Conductor core features DuPont Kevlar material for increased tensile strength
  • Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
  • Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
See More

ACDelco – Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core (Part No.9508N)

Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core

from

$63.99
ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

DENSO – Spark Plug Wire Set: Carbon Core, 8 Wire Set (Part No.671-8009)

Spark Plug Wire Set: Carbon Core, 8 Wire Set

from

$62.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

MSD Ignition – Wire Set; Street Fire; Chevy 454; HEI; 74-76 (Part No.5560)

Wire Set; Street Fire; Chevy 454; HEI; 74-76

from

$72.99
The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Product Features:
  • Helically wound conductor suppresses electro and radio noise
  • Kevlar core combination for great strength and durability
  • Heavy Duty Terminals For Secure Connection
  • 8mm silicone and synthetic jacket resists heat and abrasion
  • 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
  • Silicone Boots Protect Against High Exhaust Temps
See More

Carquest Premium – Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit (Part No.35-8126)

Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit

from

$39.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Carquest Premium – Ignition Coil (Part No.EBC1346)

Ignition Coil

from

$37.99
Carquest Premium engine management products provide the right ignition coils for a wide range of domestic and import applications. They deliver the highest performance and durability under demanding conditions. Designed to meet OE quality and performance

Product Features:
  • Coils are designed and engineered to be an OE quality replacement for fit and performance
  • High-strength dielectric epoxy and 100% copper windings used to deliver high-temperature performance and vibration resistance
  • High-efficiency laminations produce a high-energy spark and reliable performance
  • Factories use ISO 9001 and IATF 16949 standards to deliver products designed to meet or exceed OE voltage output specifications
  • Top-quality components and materials used to deliver maximum performance and long service life under tough operating conditions
  • Long service life
See More

Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1497)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$38.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
  • Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1023)

Ignition Coil: Meets OE Specifications, 1 Count

from

$33.99
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle¿s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Long service life and durable performance
  • High dielectric strength for reliability
  • Corrosion-resistant connections
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
  • High reliability
  • Long service life
See More

Delphi – Ignition Coil (Part No.F3000204504DEL)

Ignition Coil

from

$60.40
Delphi ignition coils feature precise spark timing response for increased fuel economy and faster crank-to-run. The ignition coils provide accurate electrical energy to create a voltage potential at the spark plug, providing for superior engine performance that adjusts to driving and environment conditions. Plus, like all Delphi ignition system components, they enable engine management systems to maintain tighter control over emissions, economy and performance.

Product Features:
  • Improved dwell accuracy decreases module and coil temperatures for greater reliability
  • Noise abatement material between laminations reduces audible coil noise
  • Cassettes have improved primary connector for greater ease of assembly compared to designs with one connector for each coil
  • Lower primary inductance provides high-speed performance
  • Early and precise electronic spark timing helps improve fuel economy and provides faster crank-to-run
  • Higher energy delivered to combustible mixture provides cleaner combustion to help manufacturers meet on-board diagnostics (OBD II) requirements
  • Direct connection to spark plugs (via small boot) eliminates spark plug wires
  • Composite iron coils provide programmable energy
  • Coil per cylinder dwell overlap electronics deliver better high speed performance and better heat dissipation compared to some conventional technologies
  • Coil per cylinder ramp and fire electronics decrease power dissipation and increase efficiency
  • Radio frequency interference (RFI) suppressor optional
See More

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1053)

Ignition Coil: Meets OE Specifications, 1 Count

from

$55.99
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle¿s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Long service life and durable performance
  • High dielectric strength for reliability
  • Corrosion-resistant connections
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
  • High reliability
  • Long service life
See More

Carquest – Ignition Coil (Part No.E1069)

Ignition Coil

from

$67.05
BWD® is an aftermarket leader, providing a premium line of engine management products. BWD® manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD® is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Integrated A/D converter and digital signal processing with a dynamically adaptive switch point improves accuracy and operation
  • Advanced circuitry protects the system from stray electro-magnetic fields and power spikes
  • Custom magnetic circuit programming calibrates the sensor while performance testing for improved timing accuracy between the target wheel and sensor output
  • Internal core made from grain-oriented electrical steel limits loss factor within magnetic circuit to reduce heat that may reduce coil endurance
  • External core made from oriented silicon steel ensures durability and longevity
  • Neodymium magnet produces max high voltage output at all speeds
  • Stainless steel spring resists corrosion
  • Tin-plated brass terminals improve electrical contact and protect against corrosion
See More

Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1715)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$41.49
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
  • Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

E3 – Ultra-High Output LSx Coil, Chevrolet/GM (2005-current) (Part No.E3.602)

Ultra-High Output LSx Coil, Chevrolet/GM (2005-current)

from

$59.99
E3.602 is a specially designed high performance racing coil for LS based engines. Boasting a more durable housing and upgraded internals this coil offers up to 15% higher voltage and 20% more energy than OEM coils. Ideally suited for a wide range of both naturally aspirated and forced induction racing applications, E3.602 fits GM Gen IV engines including 4.8L, 5.3L, 6.0L, 6.2L and 7.0L. When coupled with an E3 Spark Plug featuring DiamondFIRE Technology, you’ll experience tire shredding power at its finest.

Product Features:
  • Up to 15% higher Voltage
  • Up to 20% More energy than OEM Coils
  • Fits 1999-2007 CM Gen IV 4.3L, 5.3L, 6.0L, 6.2L and 7.0L engines
  • Crosses to MSD 8265
See More

ACDelco – Original Equipment Direct Ignition Coil (Part No.F3005386155ACD)

Original Equipment Direct Ignition Coil

from

$124.45
The ACDelco Direct Ignition Coil is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces. To protect coils from the harsh operating environment, laminations are corrosion protected, and primary and secondary coil windings often feature molded plastic protection. These laminations are similar to the OE part.

Product Features:
  • OES and a direct fit application
  • Meets or exceeds the OES specifications for durability and performance
  • High profile insulation to prevent arching
  • Radio-Frequency Interference (RFI) Suppression
  • Engineered to withstand extremes in temperatures
See More

Carquest Premium – Engine Camshaft Position Sensor Connector (Part No.PTA1125)

Engine Camshaft Position Sensor Connector

from

$33.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

ACDelco – Gray Multi-Purpose Pigtail (Part No.PT2655)

Gray Multi-Purpose Pigtail

from

$72.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Protective outer coverings help provide long-lasting durability
  • Color-coded wires allow for easy installation
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Ignition Coil Connector (Part No.PTA1163)

Ignition Coil Connector

from

$18.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Distributor Connector (Part No.FAA1133)

Distributor Connector

from

$54.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Ignition Coil Connector (Part No.PTA1162)

Ignition Coil Connector

from

$22.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Ignition Coil Connector (Part No.PTA1122)

Ignition Coil Connector

from

$48.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

1994 Chevrolet Caprice Ignition Coils and Boots

Maybe you’re in the middle of a full rebuild of that 1994 Chevrolet Caprice. Maybe you just need a couple of Ignition Coils and Boots. Either way, Advance Auto Parts has 12 different Ignition Coils and Boots in our inventory ranging from $18.79 to $141.99. That means you can find the exact parts or products you need to keep that 1994 Chevrolet Caprice running smoothly.

Ignition Coils and Boots are only as good as their brand. We stock 8 different brands to make sure you have plenty of trusted parts to choose from for your 1994 Chevrolet Caprice. Carquest Premium, Carquest, and Driveworks are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Ignition Coils and Boots for your 1994 Chevrolet Caprice, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 108 reviews in this category, some of the top rated parts include Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation with 4.0 stars.

So if you’re in the market for aftermarket Ignition Coils and Boots to keep your 1994 Chevrolet Caprice rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Ignition Coils and Boots Brands To Make Your 1994 Chevrolet Caprice Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1994 Chevrolet Caprice demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Coils and Boots make up Advance Auto Parts’ inventory, and all are ready to help make your Caprice the best it can be. Be sure to browse some of our top Ignition Coils and Boots brands and parts.

Top 1994 Chevrolet Caprice Ignition Coils and Boots from Driveworks

Driveworks products are another trusted brand when it comes to Ignition Coils and Boots for your 1994 Chevrolet Caprice. Popular Driveworks parts include:
Electronic Ignition Coil
from $28.99
(12)
Electronic Ignition Coil
Ignition Coils

FAQs for 1994 Chevrolet Caprice Ignition Coils and Boots

What are the most purchased Ignition Coils and Boots for the 1994 Chevrolet Caprice?

Out of 12 Ignition Coils and Boots for the 1994 Chevrolet Caprice, the most popular in our inventory are:
Ignition Coil: Meets or Exceeds OE Specifications, 1 Count
from $25.99
This product is not rated
Ignition Coil: Meets or Exceeds OE Specifications, 1 Count
Ignition Coils
Ignition Coil: Meets OE Specifications, 1 Count
from $21.99
This product is not rated
Ignition Coil: Meets OE Specifications, 1 Count
Ignition Coils
Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece
from $35.99
This product is not rated
Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece
Ignition Coils

What are the top-rated 1994 Chevrolet Caprice Ignition Coils and Boots?

Top-rated Ignition Coils and Boots for your 1994 Chevrolet Caprice based on customer reviews/ratings are: