1994 Cadillac Fleetwood Performance and Racing Products
Find Your Specific 1994 Cadillac Fleetwood Performance and Racing Products
Below you will find various in-demand Cadillac Performance and Racing Products, components and accessories for your 1994 Fleetwood. Advance Auto Parts has popular Fleetwood parts like Performance Engines, Performance Ignition Products, Performance Distributors and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Fleetwood model years including
1987,
1988,
1989,
1990,
1991,
1992,
1993,
1995,
1996 and more. Select a category of 1994 Cadillac Fleetwood Performance and Racing Products below and start saving instantly.
Popular 1994 Cadillac Fleetwood Performance and Racing Products Categories
Essential Performance and Racing Products for 1994 Cadillac Fleetwoods
Competition Cams – "Competition Cams Magnum 7.200"" Long, .080"" Wall, 5/16"" Diameter Pushrod Set, 7608-16" (Part No.7608-16)
from
$225.99
“Competition Cams Magnum 7.200″” Long, .080″” Wall, 5/16″” Diameter Pushrod Set, 7608-16. ”
See More
Competition Cams – Competition Cams Magnum 244/244 Hydraulic Roller Cam, 12-460-8 (Part No.12-460-8)
from
$577.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.
See More
B & M – B & M Transpak For 65-87 Th400 Transmission, 20228 (Part No.20228)
from
$172.99
The B&M Transpak is the next step up from the B&M Shift Improver kit. It has all the features in the Shift Improver kit, plus it provides additional driver manual control (GM TH-400, 350, Ford C-6 and Chrysler Torqueflite only). B&M Transpak kit for 1965-1987 GM TH400/375 automatic transmissions. Most stock automatic transmissions won’t downshift into low gear above 15 mph, and automatically upshift at a predetermined speed no matter what gear you’re in. With the Transpak, you can downshift at any speed, and you can hold the transmission in first gear to any speed that you want! This is an asset when you’ve got a modified engine, and you want additional RPMs, or you’re towing a trailer or driving heavy loads downhill. Stage 1. Heavy Duty is for street rods, normal passenger vehicles or other heavy duty use. Firmer shift feel but not harsh. Improves transmission performance and life dramatically without loss of comfort and offers normal automatic operation when in Drive. Stage 2 is for Hi-Performance street use. Essentially the same as Heavy Duty mode except shifts are much quicker. Retains full automatic features and standard shift points with selector in Drive.
See More
Competition Cams – Competition Cams OE-Style Hydraulic Roller Lifter Set for ’87+ OE Roller SBC and LT/LS Engines, 850-16 (Part No.850-16)
from
$288.99
COMP Cams Hydraulic Roller Lifters are a performance upgrade for stock hydraulic roller lifters or retro-fit hydraulic roller lifters for non-roller blocks. The roller wheel decreases friction and increases longevity when compared to flat tappet lifters. Hydraulic roller lifters can handle much more aggressive cam profiles than flat tappets unlocking performance potential.
See More
FEL-PRO Performance – FEL-PRO Performance PERFORMANCE INTAKE MANIFOLD GASKET SET, 1200 (Part No.1200)
from
$32.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
See More
K&N – K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-2002 (Part No.HP-2002)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N Limited Warranty.
See More
Edelbrock – Edelbrock Complete Top End Cylinder Head Gasket Set, 5.7L for 1992-97 SBC LT1 Engines, 7380 (Part No.7380)
from
$109.99
The Edelbrock No: 7380 head gaskets provide the best sealing solution and are matched to Edelbrock cylinder heads for optimal performance. Edelbrock relies on industry leading head gasket manufactures to ensure our head gasket sets will provide the best fit and sealing properties when used with Edelbrock aluminum cylinder heads. Edelbrock head gaskets are manufactured from high-density materials and feature a superior design that performs under pressure and provides a long-lasting seal, without re-torqueing.
See More
MSD Ignition – MSD Ignition Wire Set – Street Fire, Multi-Angle Plug, HEI, Universal, 5550 (Part No.5550)
from
$81.99
The Street Fire Spark Plug Wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve.
See More
Energy Suspension – Energy Suspension Ball Joint Boots, 9.13128R (Part No.9.13128R)
from
$10.49
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5-point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
See More
Edelbrock – Edelbrock Performer-Plus Camshaft Kit, 5487 (Part No.5487)
from
$406.99
“Edelbrock part No: 5487 Performer-Plus camshaft is designed for Buick 321-252 Even Fire V-6 applications. The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. This Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters, assembly lube and instructions. Camshaft Specifications: – Duration at .050 Intake: 204 degrees – Duration at .050 Exhaust: 214 degrees – Lift at Valve Intake: .448″” – Lift at Valve Exhaust: .472″” – Lobe Separation: 112 Degrees – Intake Centerline: 107 Degrees – Idle Vacuum at 1000 RPM’s: 15″””
See More
Energy Suspension – Energy Suspension Universal End Link – 4 to 4-1/2 in., 9.8164G (Part No.9.8164G)
from
$30.49
Energy Suspension continues to be the World leader in performance polyurethane suspension technology. Dedication to manufacturing and developing superior products has established Energy Suspension as the most asked-for name in performance polyurethane components today. The complex and diverse nature of Energy’s proprietary Hyper-Flex material requires constant attention to developing the optimum polyurethane formulas. This devotion has produced the quality components that our customers continue to demand. Providing problem-solving solutions with applications for the most popular vehicles, paired with our Limited warranty and superb customer support, Energy Suspension is your first quality choice in performance polyurethane suspension components.
See More
B & M – B & M Torque Converter, Holeshot 2000, 70417 (Part No.70417)
from
$675.99
This Holeshot 2000 fits 1984-93 GM 700R4/4L60 w/30 spline input, 1993-1997 4L60E w/30 spline input, and 1997-04 Corvettes. This converter retains the lock-up feature. Holeshot torque converters are for serious-minded performance enthusiasts and offer additional strength and durability features not found in our Tork Master or Traveler series of converters. The Holeshot 2000 converter is an excellent choice for vehicles with some performance engine modifications, particularly big cams that tend to reduce low-end power and torque. The higher stall speed of this converter will launch the car in a higher rpm range where more torque is readily available, resulting in quicker acceleration. Holeshot converters feature furnace-brazed impeller fins and turbine, a new precision alloy impeller hub, and new heavy-duty needle bearings. Other features include fully balanced and pressure tested by expert technicians. If your vehicle is equipped with a plate-type nitrous system or supercharger, please refer to the Nitrous Holeshot line of converters. Notes: Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, and less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Higher stall converters can generate more heat, so we highly recommend adding a transmission cooler. This converter is Not recommended for supercharged, plate-type nitrous oxide, or trans-brake applications. The product images shown are for illustration purposes only and may not be an exact representation of the product. 10.75-inch bolt circle
See More
Energy Suspension – Energy Suspension Control Arm Bushing Set, 3.3113R (Part No.3.3113R)
from
$116.99
For both front and rear of suspensions on cars, trucks and SUVs. Made of Energy’s Hyper-Flex performance polyurethane for optimum performance and durability. Maintains proper alignment under extreme conditions on the street, track or off-road. Improves vehicle handling, cornering and overall control. Full floating for smoother, efficient operation. Outlasts and outperforms rubber.
See More
Competition Cams – Competition Cams Xtreme Energy 240/246 Hydraulic Flat Cam and Lifter Kit, CL42-225-4 (Part No.CL42-225-4)
from
$397.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.
See More
Energy Suspension – Energy Suspension Tie Rod Dust Boot, 9.13101R (Part No.9.13101R)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5-point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
See More
MSD Ignition – MSD Ignition Distributor, Gm Lt-1 5.7L, 1993-1994, 8381 (Part No.8381)
from
$849.99
The pick-up is an advanced optical encoder, a different style of optical pickup than the OEM. This type of pick-up has proven to be very reliable and stable through extreme rpm and conditions. The rotor is bolted to a drive assembly that is indexed to the shaft and is stabilized through the use of a large ball bearing assembly.
See More
Energy Suspension – Energy Suspension Control Arm Bushing Set, 3.3167R (Part No.3.3167R)
from
$66.99
For both front and rear of suspensions on cars, trucks and SUVs. Made of Energy’s Hyper-Flex performance polyurethane for optimum performance and durability. Maintains proper alignment under extreme conditions on the street, track or off-road. Improves vehicle handling, cornering and overall control. Full floating for smoother, efficient operation. Outlasts and outperforms rubber.
See More
Richmond Gear – Richmond Gear RngPnn, 69-0324-1 (Part No.69-0324-1)
from
$350.99
Richmond Gear RngPnn, 69-0324-1. DRIVELINE – TRANSMISSION PARTS>DIFFERENTIAL PARTS>RING AND PINION KITS>RING AND PINION KITS from Richmond Gear
See More
PerTronix – PerTronix D9001 Flame-Thrower Hei Distributor Advance Curve Kit (Part No.D9001)
from
$29.49
Flame Thrower Street/Strip distributors have a speciallFlame-Thrower Street/Strip distributors have a specially designed HEI distributor module and coil combination which operates without misfire beyond 7500 RPM. That’s nearly 3000 RPM higher than most stock HEI Distributors. Race HEI Distributors feature an electronic HEI Distributor module and 50,000 volt coil combination that optimizes spark energy and peak current to the spark plug in the 6000 to 8500 RPM range.y designed module and coil combination which operates without misfire beyond 7500 RPM
See More
Mr. Gasket – Mr. Gasket Copper Seal: Exhaust Gasket Set, 7154 (Part No.7154)
from
$72.49
Mr. Gasket CopperSEAL Header Gaskets are a high quality copper gasket that performs extremely well and are reusable. We recommend this in all racing and high performance applications. They are for stock heads unless indicated, and work well in high heat and turbocharged applications.
See More
Mr. Gasket – Mr. Gasket Intake Manifold Bolt Set, 6091 (Part No.6091)
from
$39.29
These special Grade 8 intake manifold bolts feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They’re ideal for use where space is minimal, typical on larger runner race manifolds. These bolts and washers are bright zinc plated for protection and good looks.
See More
Edelbrock – Edelbrock Performer Intake Manifold for 1968-1976 Cadillac 472-500, Satin Finish, 2115 (Part No.2115)
from
$564.99
“Edelbrock part #2115 Performer Cadillac intake manifold is designed for 1968-76 Cadillac 472 and 500 cubic-inch engines. For either square or spread-bore carbs, this is the first intake designed specifically for high-performance Cadillacs using standard heads. Like all Edelbrock Performers, this manifold increases torque and horsepower from idle to 5500 rpm. The broad power band is ideal for high-performance’s street and engine swap applications. Specs on this non-EGR manifold include a carb pad height that’s 3″” taller than stock. Dropped divider wall evens air/fuel ratio throughout the rpm range. Stock air conditioning compressor will not fit.”
See More
B & M – B & M Automatic Shifter – Magnum Grip Pro Stick – Universal, 81040 (Part No.81040)
from
$529.99
The Magnum Grip Pro Stick shifter delivers rock-solid performance, mixed with clean design cues and compact size. This is why you see so many Pro Stick shifters at the race track. We start off with a heavy duty steel base with a hardened steel gate plate and a reverse lockout feature that only requires one hand to operate, and complies with NHRA/IHRA safety rules. Then add the billet aluminum Magnum Grip shift handle, with replaceable side grip plates, matching aluminum trigger and finish it off with a brushed aluminum cover with quick release pins, and you end up with one good looking bullet-proof race shifter. Optional Forward and Reverse shift pattern gate plates are available for most popular 2, 3 and 4-speed transmissions. This model Pro Stick comes out of the box ready for action for most popular 3-speed transmissions, includes a 5-foot Super Duty shift cable, brackets, levers, hardware and detailed instructions for an easy installation. Be sure to check out all the optional Magnum Grip side grip plates including the one and two button 12-volt momentary switches or any of the other accessories we offer for the Pro Stick in the Shifter Accessories section. Notes: AOD requires installation kit #40496, AODE & 4R70W requires installation kit #40504, E40D & 4R100 requires installation kit #40505, 2004R & 700R4 require gate plate #80712, 4L60E – 4L85E equipped with PRNDL switch requires cable bracket kit #70499 and gate plate #80712. Overall Dimensions – 8.25L x 2.92W x 10.75H
See More
Hurst – Hurst Automatic Shifter, Quarter Stick Powerglide, 3160001 (Part No.3160001)
from
$499.99
The Hurst Quarter Stick shifter provides positive gear change control for both street and race applications. Its compact size fits easily in race cars with limited space and is very lightweight at only 2.5 pounds. Features include black oxide coated steel construction, 1018 hardened steel gate plate, forged aluminum shift stick with 7/16-20 tpi and a classic white Hurst shift knob. Other features include factory installed neutral safety switch, chrome-plated trigger, and a spring-loaded reverse Loc/Out mechanism that complies with NHRA/IHRA safety rules. Includes all necessary hardware, a 5-foot long shifter cable, and complete installation instructions. Note: Optional aluminum mounting bracket, backup light switch and lightweight aluminum or plastic shifter covers available separately. Does not fit early GM cast iron PG transmission.
See More
Accel – Accel Distributor Cap & Rotor Kit – HEI Style – Tan – 1972-1986 Various GM – Clamp Down Cap, 8122 (Part No.8122)
from
$49.99
“ACCEL cap and rotor kits offer superior protection from “”arc-thru”” and crossfire. Features 60k V-rated alkyd compound, stress-relieved at molding to ensure stability. Brass inserts and steel rotor springs provide for high spark energy flow.”
See More
MSD Ignition – MSD Ignition Distributor Cap And Rotor, Gm Hei Distributor, Red, 8416 (Part No.8416)
from
$51.99
The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these Cap and Rotor Replacement Kits.
See More
B & M – B & M Automatic Shifter – Pro Ratchet – Universal, 80842 (Part No.80842)
from
$460.99
“Track-favorite simplicity with bulletproof execution: the Pro Ratchet self-centers after each shift, won’t over-shift, and integrates a one-hand reverse lockout meeting NHRA/IHRA rules. It adds a brushed cover, classic white knob, neutral safety and backup-light switches, gear indicator, 5-ft Super-Duty cable, brackets, levers, and hardware for most Chrysler, Ford, and GM 3-/4-speeds (install kits may be required). Overall: 10.75″” L x 2.9″” W x 9.25″” H.”
See More
Upgrade your 1994 Cadillac Fleetwood with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1994 Cadillac Fleetwood, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Cadillac or enhancing its overall performance, Performance and Racing Products are key to keeping your Fleetwood functioning at its best. At Advance Auto Parts, we offer a wide selection of 84 Performance and Racing Products for the 1994 Cadillac Fleetwood, designed to meet your needs without breaking the bank.
From
Performance Engine
replacements to
Performance Ignition Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1994 Cadillac Fleetwood at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $5.99 to $1,210.99, with
an average price of $349.66.
Our 84 Performance and Racing Products in stock come from 13 trusted brands, so you’re sure to find the right part for your 1994 Cadillac Fleetwood without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1994 Cadillac Fleetwood, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Energy Suspension, B & M, Competition Cams, and more.
Energy Suspension Performance and Racing Products
start at just $5.99 and boast an impressive 4.4 stars average rating from customers.
B & M and Competition Cams also bring quality to the table, with Performance and Racing Products available starting at $109.99, and at an average 4.3 stars rating.
With 168 customer reviews and counting, our 1994 Cadillac Fleetwood Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1994 Cadillac Fleetwood is always ready to roll. We’re committed to providing you with everything you need to keep your Fleetwood in top shape, all in one place.
Start shopping confidently below for your 1994 Cadillac Fleetwood!
Best-Selling Performance Engines for 1994 Cadillac Fleetwoods
Enhance the driving experience in your Cadillac with 47 quality Performance Engine components, starting at $18.79.
FEL-PRO Performance – FEL-PRO Performance PERFORMANCE INTAKE MANIFOLD GASKET SET, 1284 (Part No.1284)
from
$31.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
See More
Mr. Gasket – Mr. Gasket Intake Manifold Bolt Set, 6091 (Part No.6091)
from
$39.29
These special Grade 8 intake manifold bolts feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They’re ideal for use where space is minimal, typical on larger runner race manifolds. These bolts and washers are bright zinc plated for protection and good looks.
See More
Mr. Gasket – Mr. Gasket Intake Manifold Bolt Set – Hex Head, 955G (Part No.955G)
from
$18.79
These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.
See More
Competition Cams – Competition Cams High Energy/Marine 218/218 Hydraulic Flat Cam/Lifter Kit, CL12-210-2 (Part No.CL12-210-2)
from
$898.99
SMALL BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – High Energy: Good street performance with stock converter, choppy idle. OR High Energy Marine: Biggest cam for inboard/outboard. Good for ski, economy and light performance.
See More
Competition Cams – Competition Cams Big Mutha’ Thumpr 243/257 Hydraulic Flat Cam/Lifter Kit, CL12-602-4 (Part No.CL12-602-4)
from
$397.99
SMALL BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.
See More
Competition Cams – Competition Cams OE-Style Hydraulic Roller Lifter Set for ’87+ OE Roller SBC and LT/LS Engines, 850-16 (Part No.850-16)
from
$288.99
COMP Cams Hydraulic Roller Lifters are a performance upgrade for stock hydraulic roller lifters or retro-fit hydraulic roller lifters for non-roller blocks. The roller wheel decreases friction and increases longevity when compared to flat tappet lifters. Hydraulic roller lifters can handle much more aggressive cam profiles than flat tappets unlocking performance potential.
See More
Competition Cams – Competition Cams Magnum 224/224 Hydraulic Flat Cam, 12-211-2 (Part No.12-211-2)
from
$293.99
HYDRAULIC – Magnum: High performance. Biggest cam with stock converter but better with 2000+ stall. Use lower gears. Mild rough idle.
See More
Edelbrock – Edelbrock Intake Manifold Gasket, 7243 (Part No.7243)
from
$31.99
Edelbrock part No: 7243 Intake Gaskets for 1992-1997 LT1 Small-Block Chevys allow for optimum flow and performance. Any gasket can create a seal, but a good gasket can do it with less clamping force, and for a longer period of time. The new MP-2N Micropore technology does not use solvents making our gaskets environmentally friendly. Impervious to most chemicals, this synthetic fiber composite provides a high recovery under load. This means that when compressed, the gasket will conform to any imperfections on the sealing surface even using lower flange pressures. A nitrile bead around each port opening makes the seal even better.
See More
FEL-PRO Performance – FEL-PRO Performance Performance Cylinder Head Gasket, 1074 (Part No.1074)
from
$66.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.
See More
Competition Cams – Competition Cams Magnum 252/252 Hydraulic Roller Cam and Lifter Kit, CL12-470-8 (Part No.CL12-470-8)
from
$1210.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.
See More
B & M – B & M Holeshot 2400, 70441 (Part No.70441)
from
$849.99
This Holeshot 2400 fits all 1998-02 GM Camaro/Firebirds w/LS1 engine, 1999-up GM1500 trucks and SUV’s with 4.8L, 5.3L, or 6.0L engine and 4L60E or 4L65E transmission. This converter retains the lock-up feature. Holeshot torque converters are for serious-minded performance enthusiasts and offer additional strength and durability features not found in our Tork Master or Traveler series of converters. The Holeshot 2400 converter is an excellent choice for vehicles with some performance engine modifications, particularly big cams that tend to reduce low-end power and torque. The higher stall speed of this converter will launch the car in a higher rpm range where more torque is readily available, resulting in quicker acceleration. Holeshot converters feature furnace brazed impeller fins and turbine, new precision alloy impeller hub and new heavy duty needle bearings. Other features include fully balanced and pressure tested by expert technicians. Notes: Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Higher stall converters can generate more heat, so we highly recommend adding a transmission cooler. This converter is Not recommended for supercharged, plate-type nitrous oxide or trans-brake applications. The product images shown are for illustration purposes only and may not be an exact representation of the product. Will Not fit 1997-05 Corvette. Has both 10.75 and 11.08-inch bolt circles.
See More
Competition Cams – Competition Cams Big Mutha’ Thumpr 243/257 Hydraulic Flat Cam K-Kit, K12-602-4 (Part No.K12-602-4)
from
$737.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
See More
B & M – B & M Torque Converter, Holeshot 2000, 70417 (Part No.70417)
from
$675.99
This Holeshot 2000 fits 1984-93 GM 700R4/4L60 w/30 spline input, 1993-1997 4L60E w/30 spline input, and 1997-04 Corvettes. This converter retains the lock-up feature. Holeshot torque converters are for serious-minded performance enthusiasts and offer additional strength and durability features not found in our Tork Master or Traveler series of converters. The Holeshot 2000 converter is an excellent choice for vehicles with some performance engine modifications, particularly big cams that tend to reduce low-end power and torque. The higher stall speed of this converter will launch the car in a higher rpm range where more torque is readily available, resulting in quicker acceleration. Holeshot converters feature furnace-brazed impeller fins and turbine, a new precision alloy impeller hub, and new heavy-duty needle bearings. Other features include fully balanced and pressure tested by expert technicians. If your vehicle is equipped with a plate-type nitrous system or supercharger, please refer to the Nitrous Holeshot line of converters. Notes: Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, and less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Higher stall converters can generate more heat, so we highly recommend adding a transmission cooler. This converter is Not recommended for supercharged, plate-type nitrous oxide, or trans-brake applications. The product images shown are for illustration purposes only and may not be an exact representation of the product. 10.75-inch bolt circle
See More
Competition Cams – Competition Cams Thumpr 227/241 Hydraulic Flat Cam K-Kit, K12-600-4 (Part No.K12-600-4)
from
$655.99
SMALL BLOCK CHEVY HYDRAULIC COMPLETE KIT – Thumpr : High performance street, stock converter ok, best with 2000+ converter and gears. Choppy/thumping idle.
See More
Competition Cams – Competition Cams High Energy/Marine 218/218 Hydraulic Flat Cam K-Kit, K12-210-2 (Part No.K12-210-2)
from
$635.99
SMALL BLOCK CHEVY HYDRAULIC COMPLETE KIT – High Energy: Good street performance with stock converter, choppy idle. OR High Energy Marine: Biggest cam for inboard/outboard. Good for ski, economy and light performance.
See More
Competition Cams – Competition Cams Magnum 244/244 Hydraulic Roller Cam, 12-460-8 (Part No.12-460-8)
from
$577.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.
See More
Competition Cams – Competition Cams Magnum 252/252 Hydraulic Roller Cam, 12-470-8 (Part No.12-470-8)
from
$577.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.
See More
Competition Cams – Competition Cams Xtreme Energy 224/230 Hydraulic Roller Cam For Gm Lt1/Lt4, 07-503-8 (Part No.07-503-8)
from
$577.99
The newest cam technology is used in COMP Cams Xtreme Energy camshafts to deliver optimal performance. There is an Xtreme Energy cam for every use, including off-roading, towing, and street performance. These cams outperform comparable cams from other manufacturers in terms of throttle responsiveness and top-end horsepower because to their aggressive lobe profile, which also increases engine vacuum. There are hundreds of versions that can be installed on cars made between 1955 and the present. Choose the cam made specifically for your use case.
See More
Competition Cams – Competition Cams Xtreme 4X4 210/214 Hydraulic Roller Cam For Oe Roller Sbc, 08-411-8 (Part No.08-411-8)
from
$577.99
The COMP Cams 08-411-8 Xtreme Energy Hydraulic Roller Camshaft is marketed as a street/strip performance camshaft for small block Chevy engines, delivering aggressive mid-range horsepower, crisp throttle response, and reliable drivability.
See More
Competition Cams – Competition Cams Nitrous Hp 224/236 Hydraulic Roller Cam For Oe Roller Sbc, 08-301-8 (Part No.08-301-8)
from
$577.99
The COMP Cams 08-301-8 Nitrous HP Hydraulic Roller Camshaft is engineered for Chevy Small Block enthusiasts who demand street/strip performance with nitrous or mild supercharger setups. It delivers aggressive power gains, crisp throttle response, and reliable durability.
See More
Competition Cams – Competition Cams Thumpr 227/241 Hydraulic Roller Cam For Oe Roller Sbc, 08-600-8 (Part No.08-600-8)
from
$577.99
High performance street, stock converter ok, best with 2000+ converter and gears, choppy/thumping idle.
See More
Competition Cams – Competition Cams Xtreme Energy 248/254 Hydraulic Roller Cam, 12-444-8 (Part No.12-444-8)
from
$577.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.
See More
Competition Cams – Competition Cams Magnum 230/230 Hydraulic Roller Cam, 12-450-8 (Part No.12-450-8)
from
$577.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.
See More
Competition Cams – Competition Cams Xtreme Marine 218/224 Hydraulic Roller Cam For Oe Roller Sbc, 08-417-8 (Part No.08-417-8)
from
$577.99
The most recent advancements in camshaft engineering are utilized by COMP Cams Xtreme Marine camshafts. Compared to cams of the same duration at.050 in., their aggressive lobe shape increases engine suction and yields superior throttle response and top-end horsepower. You can always experience Xtreme performance on the water with these cams, which are suitable for both race and leisure boat applications. COMP Cams provides camshafts for your watercraft that date back to the 1950s, ranging from hydraulic and mechanical to flat and roller tappet.
See More
Most Popular 1994 Cadillac Fleetwood Performance Ignition Products
Customize your Cadillac with 3 Performance Ignition Products products
like Performance Spark Plug Wires, all
priced under $187.99.
PerTronix – PerTronix 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red (Part No.808415)
from
$91.99
Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.
See More
Accel – Accel Spark Plug Wire Set – 8.8mm-300+ Ferro-Spiral Race – Universal- Vari-Angle Boots – 7040 300+ race wire universal spark plug wire sets have a … (Part No.7040)
from
$187.99
The oversized 8.8mm wire features a double silicone construction rated at over 600 F and 60kV. High gloss black silicone wire jacket not only looks great, but resists heat extremes, petrochemicals, ozone and moisture better than so-called blended materials for greater durability and longer life. High-density, high-temperature silicone insulation provides greater dielectric strength and eliminates arcing and the effects of corona better than typical OE style rubber materials. All-Kevlar stranded inner core and fiberglass braiding add greater pull strength and terminal retention. Stainless steel and brass terminals provide unsurpassed electrical conductivity and excellent corrosion resistance compared to terminals made of common or plated metals.
See More
MSD Ignition – MSD Ignition Wire Set – Street Fire, Chevy Lt1 Camaro, 1993-1996, 5575 (Part No.5575)
from
$91.99
The Street Fire Spark Plug Wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.
See More
Top Picks for 1994 Cadillac Fleetwood Performance Distributors
Upgrade Cadillac Fleetwoods with top-quality Performance Distributors parts, including 4 OEM and aftermarket selections for your 1994 model.
PerTronix – PerTronix D9001 Flame-Thrower Hei Distributor Advance Curve Kit (Part No.D9001)
from
$29.49
Flame Thrower Street/Strip distributors have a speciallFlame-Thrower Street/Strip distributors have a specially designed HEI distributor module and coil combination which operates without misfire beyond 7500 RPM. That’s nearly 3000 RPM higher than most stock HEI Distributors. Race HEI Distributors feature an electronic HEI Distributor module and 50,000 volt coil combination that optimizes spark energy and peak current to the spark plug in the 6000 to 8500 RPM range.y designed module and coil combination which operates without misfire beyond 7500 RPM
See More
MSD Ignition – MSD Ignition Distributor Cap and Rotor Kit, GM LT-1 350 / 5.7L SFI, 1993-1994, 8481 (Part No.8481)
from
$311.99
Remember, changing the cap and rotor on this engine is no walk in the park. So when you do it, you want to make sure to install the best parts possible and the MSD Cap and Rotor deliver.
See More
MSD Ignition – MSD Ignition Distributor, Gm Lt-1 5.7L, 1993-1994, 8381 (Part No.8381)
from
$849.99
The pick-up is an advanced optical encoder, a different style of optical pickup than the OEM. This type of pick-up has proven to be very reliable and stable through extreme rpm and conditions. The rotor is bolted to a drive assembly that is indexed to the shaft and is stabilized through the use of a large ball bearing assembly.
See More
Top Street Performance – Top Street Performance Chevrolet 1992-1994 LT1 Gen. 1 Opti-Spark I Distributor, JM6505 (Part No.JM6505)
from
$142.99
TSP’s EFI Distributors offer a great alternative to the OEM price. They are designed and constructed to meet or exceed all OEM standards. With cast aluminum bodies and solid brass terminals, these are a no-brainer when replacing an EFI distributor.
See More
In-Demand Performance Exhaust Products for 1994 Cadillac Fleetwoods
Select from 2 premium Performance Exhaust Products parts for your 1994 Cadillac Fleetwood, with prices ranging from $49.99 to $72.49.
Mr. Gasket – Mr. Gasket Copper Seal: Exhaust Gasket Set, 7154 (Part No.7154)
from
$72.49
Mr. Gasket CopperSEAL Header Gaskets are a high quality copper gasket that performs extremely well and are reusable. We recommend this in all racing and high performance applications. They are for stock heads unless indicated, and work well in high heat and turbocharged applications.
See More
FEL-PRO Performance – FEL-PRO Performance Perforated steel core w/anti-stick coating Exhaust Manifold Gasket Set, 1470 (Part No.1470)
from
$49.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More
Most Sold 1994 Cadillac Fleetwood Performance Oil Filters
Explore our best-selling Cadillac parts for the 1994 Fleetwood among 1 OEM and aftermarket options starting from $17.99.
K&N – K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-2001 (Part No.HP-2001)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
See More
Top-Rated Performance and Racing Products Brands For Your 1994 Cadillac Fleetwood
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1994 Cadillac Fleetwoods. Below you’ll find some of our best rated Performance and Racing Products from Energy Suspension, B & M, and Competition Cams, and more. Performance and Racing Products from these brands that fit a 1994 Fleetwood start at just $5.99 and are rated as high as 4.4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Energy Suspension 1994 Cadillac Fleetwood Performance and Racing Products
When it comes to maintaining or upgrading your 1994 Cadillac Fleetwood, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Energy Suspension ticks all of those boxes. We offer a wide selection of Energy Suspension Performance and Racing Products, specifically designed for the 1994 Cadillac Fleetwood. With over 2 Energy Suspension brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $5.99, with an average price of just $17.99. Plus, with over 5 customer reviews and an average rating of 4.4 stars, you can trust that our Energy Suspension Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$29.99
(2)
Energy Suspension Sway Bar End Link Kit, 9.8117G
“Great part. Have used many times.”
from
$5.99
(3)
Energy Suspension Tie Rod Dust Boot, 9.13101R
“Replaced the old torn boot and added a bit of color for a low cost.”
Popular B & M 1994 Cadillac Fleetwood Performance and Racing Products
B & M auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1994 Cadillac Fleetwood owner should feel confident when installing genuine B & M parts in their vehicle. To ensure the best fit and performance for your 1994 Fleetwood, Advance Auto Parts carries a full inventory of 3 B & M Performance and Racing Products. Plus you will be keeping your Cadillac in peak condition while saving money because prices on these B & M Performance and Racing Products range from $109.99 to $549.99, plus, with more than 13 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$549.99
(1)
B & M Automatic Shifter – Megashifter – Universal, 80690
“its was pretty easy to install if u have any type of knowlegde of cars it should not be difficult at all and the shifting is awesome just be careful w”
from
$299.99
(11)
B & M Automatic Shifter – Z-Gate – Universal, 80681
“Husband has been redoing his ford truck and I over heard him say he needed a shifter I went and bought him this shifter and he loves it very easy to p”
from
$109.99
(1)
B & M Shiftplus, 4L60E And 4L80E, 70380
“the kit is amazing its a cheap and simple way to increase the shifting ability and performance of a stock transmission, a simple 2 wire install and u ”
FAQs for 1994 Cadillac Fleetwood Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1994 Cadillac Fleetwoods?
Out of 84 Performance and Racing Products that fit 1994 Cadillac Fleetwoods, the following parts are the top sellers:
- Mr. Gasket Intake Manifold Bolt Set – Hex Head, 955G (6120970) – $18.79
- B & M Automatic Shifter – Z-Gate – Universal, 80681 (6900216) – $299.99
- PerTronix 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red (10110715) – $91.99
What’s the price range for 1994 Cadillac Fleetwood Performance and Racing Products?
Performance and Racing Product prices for the 1994 Cadillac Fleetwood start at $5.99 and go up to $1,210.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1994 Cadillac Fleetwood?
The average price for Performance and Racing Products for the 1994 Cadillac Fleetwood is $349.66. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Cadillac Fleetwood model years?
What are the cheapest Performance and Racing Products for my 1994 Cadillac Fleetwood?
The cheapest 1994 Cadillac Fleetwood Performance and Racing Products we carry in stock are:
- Energy Suspension Tie Rod Dust Boot, 9.13101R (17360821) – $5.99
- Energy Suspension Tie Rod End Boot (Octagon) – 2-Pack, 9.13102G (22906874) – $6.29
- Energy Suspension Ball Joint Boots, 9.13128R (22906820) – $10.49
- K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-2001 (6120007) – $17.99
- Mr. Gasket Intake Manifold Bolt Set – Hex Head, 955G (6120970) – $18.79
What are the top-rated Performance and Racing Products that fit the 1994 Cadillac Fleetwood?
Out of 168 reviews by customers, our 1994 Cadillac Fleetwood Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1994 Cadillac Fleetwood and their top-rated products:
- Performance Oil Filters
- Performance Steering Products
- Performance Shifters
What types of Performance and Racing Products do you sell for my 1994 Cadillac Fleetwood?
As of 8/2/26, these are some of the most in-demand types of Performance and Racing Products for a 1994 Cadillac Fleetwood:
Can I get help with 1994 Cadillac Fleetwood Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Cadillac Performance and Racing Products and more.
What is your return policy for Cadillac Fleetwood Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Cadillac Fleetwood Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
