from

$11.70

The FEQ subframe bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$25.99

Designed to fit a 27mm sway bar. Whiteline’s sway bar mount bushings not only boasts the latest in bushing material technology but feature a knurled ID specifically designed to retain grease. Whiteline bushings are made from the latest highest quality synthetic elastomer and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance. They are the most positive link between your vehicles body, springs, struts, arms, bars and shocks.

Product Features:

Internal grease reservoirs provide continual self lubrication for optimum friction management.
Internal grease reservoirs provide continual self lubrication for optimum friction management.

from

$50.27

This OE quality power steering hose is the perfect replacement hose to meet the high demands placed on systems like power steering. Rein automotive products provide you with the proper fit, form and function for European vehicles. With fitments for some of the world’s finest automobiles, including Audi, BMW, Mercedes Benz, Mini, Porsche, Saab, Volkswagen, and Volvo all Rein Automotive genuine replacement parts are guaranteed original manufacturer quality. Every part is manufactured with top quality materials to ensure it has the same tolerances as the part that came on the car to provide ease of installation and long lasting durability.

Product Features:

Original Equipment fit, form and function
Manufactured from premium raw materials
Premium OE design
Right fit the first time
For European vehicles

from

$126.62

FEBI Tie rod assemblies strictly comply with the specification of the manufacturers providing; quality, performance and exact fitment. The FEBI tie rod assembly ensures a comfortable driving experience and to prevent high-frequency vibrations being transferred to other parts.

Product Features:

Original Equipment Manufacturer
Larger diameter to increase the load carrying capacity
Outstanding slide properties
High ball stud articulation angles.

from

$29.76

The Febi Subframe Mount is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$14.21

The FEQ Subframe Mount is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$65.02

The Lemfoerder Pitman Arm meets OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. The Lemfoerder Pitman arm is manufactured to exacting OE tolerances for a proper fit and function.

Product Features:

Original Equipment quality
Coated surface to prevent corrosion and rust
Fatigue tested for structural integrity
Precision made components for an ideal fit and function

from

$39.49

The APA/URO Idler Arm meets OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. The APA/URO idler arm is manufactured to exacting OE tolerances for a proper fit and function.

Product Features:

Original Equipment quality
Coated surface to prevent corrosion and rust
Fatigue tested for structural integrity
Precision made components for an ideal fit and function

from

$3.52

The FEQ idler arm bushing is designed to restore the idler arm to factory-like new condition. The FEQ OE quality replacement idler arm bushing is designed to reduce front-end vibration, shimmy and unsafe handling.

Product Features:

Improves steering response
Repairs worn components
Reduces vibration
Reduces tire wear

from

$41.99

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$31.99

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$50.98

The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$30.49

Driveworks Brand sway bar link kits are made to meet OE specifications. They work with the sway bar to reinforce the suspension system, preventing excessive body roll. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Premium Polychloroprene boot with grease relief valve keeps contaminants out
Performance tested to ensure durability

from

$51.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$7.79

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$121.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$169.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$80.99

Not many know but worn suspension bushings have an effect on braking performance. In particular these bushings tend to absorb most of the loads under braking resulting in severe wear and reduced braking efficiency over time. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long lasting durability for a safer more predictable vehicle.

Product Features:

Internal grease reservoirs provide continual self lubrication for optimum friction management.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.

from

$34.41

The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering

from

$73.99

Backed by superior materials and rigorous testing, MOOG outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength

from

$62.68

TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. TRW’s tie rod end joints includes the latest, high performance designs which incorporate the following features:

Product Features:

Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
Low friction plastic bearings that enhance damping and reliability
Manufactured using forged or cold formed steel
Two-seat design is standard, and eliminates the need for a spring
Top of the ball pins are polished
Salt Spray Test (240hrs)
Dynamic Test and Elasticity Test
Original Equipment quality hardware installation accessories
Acoustic measurements to ensure driver comfort
Strength tests for durability

from

$378.82

Since its founding in 1987 Maval Manufacturing has been a world leader in the remanufacturing of power rack and pinion systems and related components. Trusted by Original Equipment Service Organizations and Global Distributors alike, Maval has consistently delivered the finest Remanufactured Rack and Pinions, Gear Boxes, and Power Steering Pumps to customers around the globe. Applying OE-experience and standards results in a remanufactured power steering pump that offer like-new quality and dependability.

Product Features:

OEM-Quality and Direct Fit replacement
Components are inspected and cleaned of rust and corrosion.
Shaft and internal surfaces are inspected, reconditioned and polished.
Seals and O-rings are replaced with new, OE-equivalent parts.
Assembled units are 100% functionally tested for leaks and performance.

from

$195.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$31.42

The Lemfoerder Idler Arm meets OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. The Lemfoerder idler arm is manufactured to exacting OE tolerances for a proper fit and function.

Product Features:

Original Equipment quality
Coated surface to prevent corrosion and rust
Fatigue tested for structural integrity
Precision made components for an ideal fit and function

from

$100.06

The Febi Idler Arm meets OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. The Febi idler arm is manufactured to exacting OE tolerances for a proper fit and function.

Product Features: