1994 BMW 530iT Belts and Hoses

Essential Belts and Hoses for 1994 BMW 530iTs

Kayser – Kayser Oil Separator Hose (Part No.B2019233568KAY)

Kayser Oil Separator Hose

from

$39.61
The Kayser Oil Separator Hose is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

INA – Accelerator Belt Tension Pulley, With Lever (Part No.G601137818INA)

Accelerator Belt Tension Pulley, With Lever

from

$162.07
Accelerator Belt Tension Pulley, With Lever

INA – Accessory Belt Tension Pulley, 70 mm (Part No.G601137819INA)

Accessory Belt Tension Pulley, 70 mm

from

$71.55
Accessory Belt Tension Pulley, 70 mm

Gates – Premium 5/16 X 50 Ft Heater Hose by Gates (sold by each) (Part No.28408)

Premium 5/16 X 50 Ft Heater Hose by Gates (sold by each)

from

$1.79
Premium hose constructed for long service life.

Product Features:
  • Good resistance to high temperatures for extended periods of time
  • Similar to SAE 20R3 Class D-3
  • Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • CAUTION: Do not use for fuel or oil transfer applications.
See More

CRP – Hose Clamp (Part No.Y3063860147CRP)

Hose Clamp

from

$4.11
Hose Clamp

ContiTech – Drive V-Belt (Part No.W1000655506CON)

Drive V-Belt

from

$49.76
All ContiTech V-Belts are quiet, OE-quality and virtually service free. The only time these belts require attention is during installation. Designed to be oil-resistant and temperature-stable from -22F to 176F (30C to 80C), ContiTech V-Belts are open-flanked, toothed, and shaped for greater traction and torque. High performance construction features include a synthetic fiber fabric cover, a special polyester cord designed to permit tightly controlled shrink, plus a polychloroprene rubber body, integrally molded cogs, and raw edges.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Polyester fiber tensile members and a ribbed belt design.
See More

ContiTech – Multi Rib (Serpentine) Belt (Part No.W100027690CON)

Multi Rib (Serpentine) Belt

from

$25.74
ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Temperature-stable from -22F to 176F (30C to 80C).
  • Delivers over 98% power efficiency.
  • High performance construction.
  • Polychloroprene rubber cover and body.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Dayco – Idler Pulley (Part No.89077)

Idler Pulley

from

$90.99
Dayco No Slack Idler/Tensioner Pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and therefore longer belt life. This pulley includes lifetime lubricated ball bearings and double high temperature seals to assure peak bearing performance, the most critical element of a pulley’s service life. This specific “flat”, serpentine belt driven assembly pulley contains specially formulated glass-filled polymers to insure a high strength, cooler running, and wear resistant “plastic” pulley.

Product Features:
  • Lifetime lubricated ball bearings
  • Double high temperature seals to assure peak bearing performance
  • Flat assembly pulley that contains specially formulated glass-filled polymers to insure a high strength, cooler running, wear resistant “plastic” pulley
  • Meets or exceeds OE quality
See More

Elaplast – Elaplast Heater Hose (Part No.R303037296ELA)

Elaplast Heater Hose

from

$60.55
Elaplast brand engine cooling products are designed and manufactured to exceed original equipment (OE) specifications and are engineered to operate in the highly-stressful environment of today’s higher performance cooling systems. The Elaplast line of cooling system hoses are designed to meet OE standards and are subjected to rigorous quality and performance tests.

Product Features:
  • All cooling-water hose inner linings are resistant to electrochemical cracking
  • high strength and resistance to oil, mud, salt, road debris, and ozone
  • Resistance to distilled water and water ethylene glycol mixtures
  • Resistance to air temperatures of up to 125C
See More

APA/URO – APA/URO Heater Hose (Part No.R303037251APA)

APA/URO Heater Hose

from

$15.58
All APA/URO rubber coolant hoses are pre-shaped and double reinforced for extra strength and durability. Each hose is manufactured from ECD (Electro Chemical Degradation) resistant materials, which prevents electrolysis from breaking down the rubber from the inside out. All APA/URO cooling components are made to meet or exceed OE standards.

Product Features:
  • All cooling-water hose inner linings are resistant to electrochemical cracking
  • high strength and resistance to oil, mud, salt, road debris, and ozone
  • Resistance to distilled water and water ethylene glycol mixtures
  • Resistance to air temperatures of up to 125C
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K050385)

Micro-V« Serpentine Drive Belt

from

$33.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Dayco – Poly Rib Belt Serpentine Belt; 38.58 Long, 5 Rib Count (Part No.5050385)

Poly Rib Belt Serpentine Belt; 38.58 Long, 5 Rib Count

from

$35.49
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Rein – Water Hose (Part No.CHE0165R)

Water Hose

from

$15.99
Rein Automotive OE quality coolant hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:
  • Reduces installation time.
  • No cutting, refitting or adjusting the hose.
  • Prevents leaks and comebacks from reusing old quick connectors and o-rings.
  • Resistant to heat, salt, road debris, oil and other contaminants.
See More

Rein – Radiator Hose (Part No.CHR0031R)

Radiator Hose

from

$19.99
Rein Automotive OE quality radiator hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:
  • Reduces installation time.
  • No cutting, refitting or adjusting the hose.
  • Prevents leaks and comebacks from reusing old quick connectors and o-rings.
  • Resistant to heat, salt, road debris, oil and other contaminants.
See More

Rein – Radiator Hose Clamp (Part No.G2010307541RIN)

Radiator Hose Clamp

from

$2.73
Radiator Hose Clamp

Litens – Idler Pulley: Direct Fit, Thermoplastic, 70mm Diameter (Part No.900062A)

Idler Pulley: Direct Fit, Thermoplastic, 70mm Diameter

from

$46.99
This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in Canada to the O.E. specified design and meets all performance and durability requirements. Heavy duty thermoplastic construction. This is a 70mm flat pulley (without flange) with a 8mm recessed bolt hole for BMW applications. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

Litens – Idler Pulley: Direct Fit, Thermoplastic, 70mm Diameter, w/ Hardware (Part No.900129A)

Idler Pulley: Direct Fit, Thermoplastic, 70mm Diameter, w/ Hardware

from

$116.99
This Litens pulley is manufactured by the original equipment pulley supplier to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in Germany to the O.E. specified design and meets all performance and durability requirements. Heavy duty thermoplastic construction. This is a 70mm flat pulley (without flange) pre-assembled on a mounting bracket for BMW applications. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

INA – INA Accessory Belt Idler Pulley (Part No.G602055659INA)

INA Accessory Belt Idler Pulley

from

$61.89
The INA Accessory Belt Idler Pulley is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Precision bearing
  • OE High quality pulley assembly
  • Durable long life performance.
See More

Litens – Idler Pulley: Direct Fit, Thermoplastic, 80mm Diameter (Part No.900063A)

Idler Pulley: Direct Fit, Thermoplastic, 80mm Diameter

from

$51.99
This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in Canada to the O.E. specified design and meets all performance and durability requirements. Heavy duty thermoplastic construction. This is a 80mm flat pulley (without flange) with a 9mm recessed bolt hole for BMW applications. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

Upgrade your 1994 BMW 530iT with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 1994 BMW 530iT, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Belts and Hoses are key to keeping your 530iT functioning at its best. At Advance Auto Parts, we offer a wide selection of 25 Belts and Hoses for the 1994 BMW 530iT, designed to meet your needs without breaking the bank. From Radiator Hose replacements to Serpentine and V Belts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1994 BMW 530iT at great prices. Our Belts and Hoses inventory for this model ranges from just $1.79 to $162.07, with an average price of $40.57. Our 25 Belts and Hoses in stock come from 12 trusted brands, so you’re sure to find the right part for your 1994 BMW 530iT without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1994 BMW 530iT, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco, and more. Dayco Belts and Hoses start at just $35.49 and boast an impressive 5 stars average rating from customers. With 3 customer reviews and counting, our 1994 BMW 530iT Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1994 BMW 530iT is always ready to roll. We’re committed to providing you with everything you need to keep your 530iT in top shape, all in one place. Start shopping confidently below for your 1994 BMW 530iT!

Best-Selling Radiator Hoses for 1994 BMW 530iTs

Enhance the driving experience in your BMW with 3 quality Radiator Hose components, starting at $1.79.

Gates – Premium 5/16 X 50 Ft Heater Hose by Gates (sold by each) (Part No.28408)

Premium 5/16 X 50 Ft Heater Hose by Gates (sold by each)

from

$1.79
Premium hose constructed for long service life.

Product Features:
  • Good resistance to high temperatures for extended periods of time
  • Similar to SAE 20R3 Class D-3
  • Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • CAUTION: Do not use for fuel or oil transfer applications.
See More

Rein – Radiator Hose (Part No.CHR0031R)

Radiator Hose

from

$19.99
Rein Automotive OE quality radiator hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:
  • Reduces installation time.
  • No cutting, refitting or adjusting the hose.
  • Prevents leaks and comebacks from reusing old quick connectors and o-rings.
  • Resistant to heat, salt, road debris, oil and other contaminants.
See More

Rein – Water Hose (Part No.CHE0165R)

Water Hose

from

$15.99
Rein Automotive OE quality coolant hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:
  • Reduces installation time.
  • No cutting, refitting or adjusting the hose.
  • Prevents leaks and comebacks from reusing old quick connectors and o-rings.
  • Resistant to heat, salt, road debris, oil and other contaminants.
See More

Most Popular 1994 BMW 530iT Serpentine and V Belts

Customize your BMW with 7 Serpentine and V Belts products like Serpentine Belts, Drive Belt Idler Assemblies, and V-Belts, all priced under $90.99.

Dayco – Poly Rib Belt Serpentine Belt; 38.58 Long, 5 Rib Count (Part No.5050385)

Poly Rib Belt Serpentine Belt; 38.58 Long, 5 Rib Count

from

$35.49
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Bando – Drive Belt (Part No.W100027690BAN)

Drive Belt

from

$18.56
Drive Belt

Dayco – Idler Pulley (Part No.89077)

Idler Pulley

from

$90.99
Dayco No Slack Idler/Tensioner Pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and therefore longer belt life. This pulley includes lifetime lubricated ball bearings and double high temperature seals to assure peak bearing performance, the most critical element of a pulley’s service life. This specific “flat”, serpentine belt driven assembly pulley contains specially formulated glass-filled polymers to insure a high strength, cooler running, and wear resistant “plastic” pulley.

Product Features:
  • Lifetime lubricated ball bearings
  • Double high temperature seals to assure peak bearing performance
  • Flat assembly pulley that contains specially formulated glass-filled polymers to insure a high strength, cooler running, wear resistant “plastic” pulley
  • Meets or exceeds OE quality
See More

ContiTech – Drive V-Belt (Part No.W1000655506CON)

Drive V-Belt

from

$49.76
All ContiTech V-Belts are quiet, OE-quality and virtually service free. The only time these belts require attention is during installation. Designed to be oil-resistant and temperature-stable from -22F to 176F (30C to 80C), ContiTech V-Belts are open-flanked, toothed, and shaped for greater traction and torque. High performance construction features include a synthetic fiber fabric cover, a special polyester cord designed to permit tightly controlled shrink, plus a polychloroprene rubber body, integrally molded cogs, and raw edges.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K050385)

Micro-V« Serpentine Drive Belt

from

$33.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

ContiTech – Multi Rib (Serpentine) Belt (Part No.W100027690CON)

Multi Rib (Serpentine) Belt

from

$25.74
ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Temperature-stable from -22F to 176F (30C to 80C).
  • Delivers over 98% power efficiency.
  • High performance construction.
  • Polychloroprene rubber cover and body.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W100027690MBL)

Multi-Rib (Serpentine) Belt

from

$19.38
The Mitsuboshi Multi Rib (Serpentine) Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
See More

Top Picks for 1994 BMW 530iT Pulleys

Upgrade BMW 530iTs with top-quality Pulleys parts, including 8 OEM and aftermarket selections for your 1994 model.

Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 24.5 mm Smooth (Part No.89046)

Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 24.5 mm Smooth

from

$56.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

INA – Accelerator Belt Tension Pulley, With Lever (Part No.G601137818INA)

Accelerator Belt Tension Pulley, With Lever

from

$162.07
Accelerator Belt Tension Pulley, With Lever

Litens – Idler Pulley: Direct Fit, Thermoplastic, 70mm Diameter, w/ Hardware (Part No.900129A)

Idler Pulley: Direct Fit, Thermoplastic, 70mm Diameter, w/ Hardware

from

$116.99
This Litens pulley is manufactured by the original equipment pulley supplier to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in Germany to the O.E. specified design and meets all performance and durability requirements. Heavy duty thermoplastic construction. This is a 70mm flat pulley (without flange) pre-assembled on a mounting bracket for BMW applications. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

INA – Accessory Belt Tension Pulley, 70 mm (Part No.G601137819INA)

Accessory Belt Tension Pulley, 70 mm

from

$71.55
Accessory Belt Tension Pulley, 70 mm

INA – INA Accessory Belt Idler Pulley (Part No.G602055659INA)

INA Accessory Belt Idler Pulley

from

$61.89
The INA Accessory Belt Idler Pulley is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Precision bearing
  • OE High quality pulley assembly
  • Durable long life performance.
See More

Litens – Idler Pulley: Direct Fit, Thermoplastic, 80mm Diameter (Part No.900063A)

Idler Pulley: Direct Fit, Thermoplastic, 80mm Diameter

from

$51.99
This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in Canada to the O.E. specified design and meets all performance and durability requirements. Heavy duty thermoplastic construction. This is a 80mm flat pulley (without flange) with a 9mm recessed bolt hole for BMW applications. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

Litens – Idler Pulley: Direct Fit, Thermoplastic, 70mm Diameter (Part No.900062A)

Idler Pulley: Direct Fit, Thermoplastic, 70mm Diameter

from

$46.99
This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in Canada to the O.E. specified design and meets all performance and durability requirements. Heavy duty thermoplastic construction. This is a 70mm flat pulley (without flange) with a 8mm recessed bolt hole for BMW applications. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

APA/URO Parts – Pulley Bolt Cover (Part No.G6025401155APA)

Pulley Bolt Cover

from

$4.26
Pulley Bolt Cover

In-Demand Heater Hoses for 1994 BMW 530iTs

Select from 2 premium Heater Hoses parts for your 1994 BMW 530iT, with prices ranging from $15.58 to $60.55.

Elaplast – Elaplast Heater Hose (Part No.R303037296ELA)

Elaplast Heater Hose

from

$60.55
Elaplast brand engine cooling products are designed and manufactured to exceed original equipment (OE) specifications and are engineered to operate in the highly-stressful environment of today’s higher performance cooling systems. The Elaplast line of cooling system hoses are designed to meet OE standards and are subjected to rigorous quality and performance tests.

Product Features:
  • All cooling-water hose inner linings are resistant to electrochemical cracking
  • high strength and resistance to oil, mud, salt, road debris, and ozone
  • Resistance to distilled water and water ethylene glycol mixtures
  • Resistance to air temperatures of up to 125C
See More

APA/URO – APA/URO Heater Hose (Part No.R303037251APA)

APA/URO Heater Hose

from

$15.58
All APA/URO rubber coolant hoses are pre-shaped and double reinforced for extra strength and durability. Each hose is manufactured from ECD (Electro Chemical Degradation) resistant materials, which prevents electrolysis from breaking down the rubber from the inside out. All APA/URO cooling components are made to meet or exceed OE standards.

Product Features:
  • All cooling-water hose inner linings are resistant to electrochemical cracking
  • high strength and resistance to oil, mud, salt, road debris, and ozone
  • Resistance to distilled water and water ethylene glycol mixtures
  • Resistance to air temperatures of up to 125C
See More

Most Sold 1994 BMW 530iT Engine Cooling Hoses

Explore our best-selling BMW parts for the 1994 530iT among 1 OEM and aftermarket options starting from $2.73.

Rein – Radiator Hose Clamp (Part No.G2010307541RIN)

Radiator Hose Clamp

from

$2.73
Radiator Hose Clamp

Top-Rated Belts and Hoses Brands For Your 1994 BMW 530iT

Shop for the best-rated brands offering Belts and Hoses and other products for your 1994 BMW 530iTs. Below you’ll find some of our best rated Belts and Hoses from Dayco, and more. Belts and Hoses from these brands that fit a 1994 530iT start at just $35.49 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 1994 BMW 530iT Belts and Hoses

When it comes to maintaining or upgrading your 1994 BMW 530iT, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 1994 BMW 530iT. With over 3 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $35.49, with an average price of just $61.16. Plus, with over 3 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Poly Rib Belt Serpentine Belt; 38.58 Long, 5 Rib Count
from
$35.49

(1)

Poly Rib Belt Serpentine Belt; 38.58 Long, 5 Rib Count

“Great product”

Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 24.5 mm Smooth
from
$56.99

(2)

Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 24.5 mm Smooth

“Just purchased looks and feels like a quality pulley.”

Idler Pulley
from
$90.99
This product is not rated

Idler Pulley

“”

FAQs for 1994 BMW 530iT Belts and Hoses

Which Belts and Hoses are best-sellers for 1994 BMW 530iTs?

Out of 25 Belts and Hoses that fit 1994 BMW 530iTs, the following parts are the top sellers:

What’s the price range for 1994 BMW 530iT Belts and Hoses?

Belts and Hose prices for the 1994 BMW 530iT start at $1.79 and go up to $162.07 for the most premium parts.

What’s the average price of a Belts and Hose for a 1994 BMW 530iT?

The average price for Belts and Hoses for the 1994 BMW 530iT is $40.57. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other BMW 530iT model years?

Yes, we currently carry Belts and Hoses for 1 model years of BMW 530iTs between 1995 and 1995. Belts and Hoses are bought most frequently for the following model years: 1995.

What are the cheapest Belts and Hoses for my 1994 BMW 530iT?

The cheapest 1994 BMW 530iT Belts and Hoses we carry in stock are:

What are the top-rated Belts and Hoses that fit the 1994 BMW 530iT?

Out of 3 reviews by customers, our 1994 BMW 530iT Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 1994 BMW 530iT and their top-rated products:

What types of Belts and Hoses do you sell for my 1994 BMW 530iT?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 1994 BMW 530iT:

Can I get help with 1994 BMW 530iT Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Belts and Hoses and more.

What is your return policy for BMW 530iT Belts and Hoses?

Advance Auto Parts keeps returns simple. For new BMW 530iT Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.