1994 BMW 525iT Steering and Chassis Parts
More 1994 BMW 525iT Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1994 BMW 525iT, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1994 BMW 525iT Steering and Chassis Parts
Cardone – Power Steering Pump (Part No.21-5889)
from
$195.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Dorman – OE Solutions Driveshaft Flex Joint Coupler (Part No.K1006720047DOR)
from
$79.82
Restore a smooth ride and easy acceleration with Dorman’s Driveshaft Coupler. Engineered from high-quality rubber for long-lasting service, it effectively absorbs and reduces vibration between the driveshaft and transmission or transfer case. Plus, depending on the application, all installation hardware is included for a complete repair.
Product Features:
See More
Product Features:
- Direct replacement and direct fit Drive Shaft Couplers available (where applicable) for ease of replacement
- Comes with bolts and washers (where applicable)
- Easy to install
- Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards
Rein – Power Steering Reservoir (Part No.PSR0027)
from
$24.99
Rein Automotive OE quality power steering reservoirs, install, fit and perform the way the original manufacturer intended. These reservoirs are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life.
Product Features:
See More
Product Features:
- Reservoir contains filter that is not-removable and reservoir must be replaced to keep power steering system functioning properly
- Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
- Direct fitment allows easy installation
- Manufactured to strict engineering standards/specifications in materials and tolerances
Energy Suspension – Sway Bar Bushing Set (Part No.12.5101G)
from
$25.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Lemfoerder – Sway Bar Link (Part No.L1030655860LEM)
from
$49.13
The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Lemfoerder – Lemfoerder Idler Arm (Part No.M302046367LEM)
from
$31.45
The Lemfoerder Idler Arm meets OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. The Lemfoerder idler arm is manufactured to exacting OE tolerances for a proper fit and function.
Product Features:
See More
Product Features:
- Original Equipment quality
- Coated surface to prevent corrosion and rust
- Fatigue tested for structural integrity
- Precision made components for an ideal fit and function
First Equipment Quality – FEQ Idler Arm Bushing (Part No.M304036878FEQ)
from
$3.52
The FEQ idler arm bushing is designed to restore the idler arm to factory-like new condition. The FEQ OE quality replacement idler arm bushing is designed to reduce front-end vibration, shimmy and unsafe handling.
Product Features:
See More
Product Features:
- Improves steering response
- Repairs worn components
- Reduces vibration
- Reduces tire wear
MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.RK9925)
from
$77.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
Lemfoerder – ZF/Lemfoerder Tie Rod End (Part No.M3010669497LEM)
from
$32.78
The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.
Product Features:
See More
Product Features:
- OE expertise and quality
- Precision manufactured housing and components
- Corrosion protection
- Permanently attached boot
- One-piece forged housing for easier steering
APA/URO Parts – P/S Pump Pulley (Part No.M2060255582APA)
from
$66.03
P/S Pump Pulley
Powercraft – Pump Seal Kit (Part No.8841)
from
$51.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Driveworks – Tapered Roller Bearing (Part No.S-HM-89410)
Rein – Power Steering Suction Hose (Part No.PSH0187)
from
$50.99
Rein power steering hoses are manufactured with premium ContiTech OE quality hose material designed to withstand the high pressure demands of automotive power steering systems. Rein power steering hoses are designed to resist excessive heat, oil and ozone factors that breakdown rubber and cause premature failure in power steering systems.
Product Features:
See More
Product Features:
- Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
- Designed as direct-fit replacements to ensure trouble-free proper installation.
- Complete with hardware and seals when necessary for installation to save installation time and additional costs.
- Restores your vehicle to safe and optimal performance levels.
- Replacing both pressure and return hoses together ensures optimal performance and safety levels.
First Equipment Quality – Subframe Mount (Part No.L1005271694FEQ)
from
$14.21
The FEQ Subframe Mount is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Carquest Premium – Pressure Hose Assembly (Part No.40258)
from
$59.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.
Product Features:
See More
Product Features:
- Double lock beading with barbed tube end provides superior hose/coupling integrity
- Zinc coated tubes protect against rust and corrosion
- Banjo end lock tabs prevent hose end from loosening
Cardone – Power Steering Filter (Part No.20-P038F)
from
$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Rein – Tie Rod (Part No.SCT0042P)
from
$54.99
Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.
See More
Rare Parts – Tie Rod Assembly (Part No.RP27808)
from
$134.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with inner and outer tie rod ends
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Energy Suspension – Sway Bar Bushing Set (Part No.12.5101R)
from
$25.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
CRP – Hose Clamp (Part No.Y3063860147CRP)
from
$3.55
Hose Clamp
ZF – Power Steering Reservoir Cap (Part No.M2070442134ZF)
from
$12.52
Power Steering Reservoir Cap
Rare Parts – Center Link (Part No.RP27836)
from
$249.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Forged steel
- Heat treated components
- Improves steering response
Meyle – Center Link (Part No.M3015392488MEY)
from
$74.54
Center Link
Lemfoerder – Lemfoerder Pitman Arm (Part No.M3025442577LEM)
from
$65.02
The Lemfoerder Pitman Arm meets OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. The Lemfoerder Pitman arm is manufactured to exacting OE tolerances for a proper fit and function.
Product Features:
See More
Product Features:
- Original Equipment quality
- Coated surface to prevent corrosion and rust
- Fatigue tested for structural integrity
- Precision made components for an ideal fit and function
APA/URO Parts – Idler Arm (Part No.M3025442577APA)
from
$39.49
The APA/URO Idler Arm meets OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. The APA/URO idler arm is manufactured to exacting OE tolerances for a proper fit and function.
Product Features:
See More
Product Features:
- Original Equipment quality
- Coated surface to prevent corrosion and rust
- Fatigue tested for structural integrity
- Precision made components for an ideal fit and function
Popular 1994 BMW 525iT Steering and Chassis Parts Categories
1994 BMW 525iT Steering and Chassis Parts
You count on your 1994 BMW 525iT to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 57 Steering and Chassis Parts ranging in price from $2.97 to $249.99, you’re sure to find everything you need for your 1994 BMW 525iT.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 20 different brands like Cardone, Dorman, and National. 1994 BMW 525iT Steering and Chassis Parts start as low as $2.97!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 62 extensive product reviews on 1994 BMW 525iT Steering and Chassis Parts.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1994 BMW 525iT below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1994 BMW 525iT
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1994 BMW 525iT running right for years to come. In our inventory you’ll find brands like Cardone, Dorman, National, and even more.
Popular Cardone Steering and Chassis Parts
You’ll find popular Cardone brand products across Power Steering Parts. All are waiting to get your 1994 BMW 525iT back on the road. Some of the top-rated Cardone products in these categories are:
FAQs for 1994 BMW 525iT Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1994 BMW 525iT?
Out of 57 Steering and Chassis Parts for the 1994 BMW 525iT, the most popular in our inventory are:
from
$54.99
This product is not rated
Power Steering Reservoir: Black, Plastic, Original Equipment Replacement
Power Steering Reservoirs
