1994 BMW 325is Exhaust Parts
More 1994 BMW 325is Exhaust Parts Categories
If you’re looking for an original Exhaust Parts replacement for a 1994 BMW 325is, you can search through our selection below. You’ll also find aftermarket and OEM Exhaust Parts to meet your needs.
Essential 1994 BMW 325is Exhaust Parts
Walker – Donut Exhaust Pipe Flange Gasket: Graphite with Steel, Heat Resistant, Premium Materials (Part No.31583)
from
$9.99
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
HJS – Exhaust Seal Ring (Part No.H4002686273HJS)
from
$11.28
Exhaust Seal Ring
Walker – Hanger Length 2.5 (Part No.35123)
from
$11.79
Complete your exhaust repair with Walker® exhaust hangers. Designed with OE-style features to support undercar exhaust components, Walker hangers are manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- OE DESIGN — Designed with OE-style features for easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS — Made from quality steel for durability and long life
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Vaico – Exhaust Hanger (Part No.H805076123VCO)
from
$4.40
Exhaust Hanger
Elring – Exhaust Manifold Gas (Part No.A8111681922ELR)
from
$8.60
Exhaust Manifold Gas
Victor Reinz – Exhaust Manifold Gasket Set (Part No.15-27122-01)
from
$43.99
As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
CRP – Exhaust Nut (Part No.H1001417721CRP)
from
$2.09
Exhaust Nut
Febi – EXHAUST NUT (Part No.H1001570904FEB)
from
$2.17
EXHAUST NUT
CRP – Exhaust Flange Nut (Part No.H100830970CRP)
from
$1.90
Exhaust Flange Nut
HJS – Exhaust Seal Ring (Part No.H4002743781HJS)
from
$9.52
Exhaust Seal Ring
HJS – Exh. Man. to Pipe Ga (Part No.H4003103581HJS)
from
$7.92
Exh. Man. to Pipe Ga
BRExhaust – Exhaust Hanger (Part No.255-070)
from
$15.49
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust insulator mounts will help to keep your components in the right position, resulting in a longer lifespan for your exhaust system.
Product Features:
See More
Product Features:
- Exhaust accessory that enables a complete installation process
- Precise fitment
- Precise fitment
- Manufactured according to strict OE standards
- Reduced Vibration
Febi – Exhaust Nut (Part No.H100111133FEB)
from
$2.01
Exhaust Nut
MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.94007)
from
$124.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94007 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed (Part No.81101)
from
$542.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
Walker – CalCat Universal Converter (Part No.80801)
from
$142.99
Walker®, an industry leader for many popular European, Asian and North American vehicles, offers Walker® CalCat® Universal Catalytic Converters, available for OBDII (1996 and newer) vehicles and Pre-OBD (1995 and older) vehicles, specifically formulated to comply with California Air Resource Board (CARB) regulations. Walker® CalCat® Universal Catalytic Converters feature OE-style hangers, brackets, routings and heat shields allowing quick and easy installation of direct-fit units. OE expertise delivers application-engineered parts, providing the best fit and performance for even the most challenging emissions issues, while premium substrate material and a high-technology wash coat ensure exceptional oxygen storage capacity. Walker® CalCat® Catalytic Converters are legal for sale in the state of California, and any state complying with California regulations.
Product Features:
See More
Product Features:
- Legal for sale in the state of California, complies with C.A.R.B. regulations
- Stainless steel body with aluminized pipe and heat shields for durability
- Expandable bushings for custom installation requirements
- Universal converter may require modification to complete installation
- 5-year/50,000-mile catalytic performance and structural integrity warranty
MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.94008)
from
$124.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94008 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Flowmaster Inc. – Catalytic Converter – Universal – 222 Series – 2.00 in. Inlet/Outlet – 49 State (Part No.2220120)
from
$131.99
Flowmaster 49-state universal catalytic converters are designed to meet federal EPA emissions requirements on a wide variety of applications. These high quality catalytic converters are manufactured in the USA, and feature stainless steel outer shell construction for maximum durability. The internal substrate material and precious metal loading have been carefully engineered for maximum efficiency and to avoid MIL (Malfunction Indicator Lamp) code issues that are common with lower quality converters. Universal catalytic converters require welding and/or fabrication and should be installed by qualified technicians. Please refer to the Flowmaster application guide for specific part number/vehicle applications. Flowmaster 49-state converters are not legal for sale or use on vehicles licensed or operated in the state of California.
Product Features:
See More
Product Features:
- Excellent flow characteristics
- Engineered to keep the “MIL” light off
- Available for a wide variety of applications
- Stainless steel construction
- Made in the USA
MagnaFlow – Standard Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.23802)
from
$623.99
MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23802 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 1992-1995 BMW 325i and 1994-1995 BMW 325is, this direct-fit catalytic converter also interchanges with OE part 18 30 1 247 143. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed (Part No.81133)
from
$506.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)
from
$85.99Product Features:
- Show Quality Chrome Platinum
- Durable Black Finish
- Can Be Welded Or Clamped
- Complete The System
- Glass-Packed Resonators
Popular 1994 BMW 325is Exhaust Parts Categories
1994 BMW 325is Exhaust Parts
You count on your 1994 BMW 325is to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 22 Exhaust Parts ranging in price from $1.90 to $623.99, you’re sure to find everything you need for your 1994 BMW 325is.
Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 10 different brands like Walker, Flowtech, and BRExhaust. 1994 BMW 325is Exhaust Parts start as low as $1.90!
One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 7 extensive product reviews on 1994 BMW 325is Exhaust Parts. Some of the top-rated Exhaust Parts products we carry are CalCat Universal Converter with 5.0 stars.
Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 1994 BMW 325is below to get started!
Top-Rated Exhaust Parts Brands For Your 1994 BMW 325is
Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1994 BMW 325is running right for years to come. In our inventory you’ll find brands like Walker, Flowtech, BRExhaust, and even more.
Popular Flowtech Exhaust Parts
You’ll find popular Flowtech brand products across Exhaust Tips. All are waiting to get your 1994 BMW 325is back on the road. Some of the top-rated Flowtech products in these categories are:
FAQs for 1994 BMW 325is Exhaust Parts
What are the most purchased Exhaust Parts for the 1994 BMW 325is?
Out of 22 Exhaust Parts for the 1994 BMW 325is, the most popular in our inventory are:
from
$5.49
(1)
3 Bolt Exhaust Pipe Flange Gasket: Fiber with Metal, Heat Resistant, Premium Materials
Exhaust Pipe and Flange Gaskets
What are the top-rated 1994 BMW 325is Exhaust Parts?
Top-rated Exhaust Parts for your 1994 BMW 325is based on customer reviews/ratings are:
from
$142.99
(1)
CalCat Universal Converter
“Had to cut my old Cat and weld new Cat onto ends. Passed my failed 1991 Honda Accord with flying colors. Reduced HC and NOX numbers from the 1000s d”
